X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fhoneycomb%2Fpersistence.robot;fp=resources%2Flibraries%2Frobot%2Fhoneycomb%2Fpersistence.robot;h=0000000000000000000000000000000000000000;hp=bc2b167f2830f49708173ce5c31c026ece1971ef;hb=e7ad66f3147662973039caaac33015de7e0c6f8c;hpb=20cc67d5f23a7f4e05b08012bf3d3a63be4bcf63

diff --git a/resources/libraries/robot/honeycomb/persistence.robot b/resources/libraries/robot/honeycomb/persistence.robot
deleted file mode 100644
index bc2b167f28..0000000000
--- a/resources/libraries/robot/honeycomb/persistence.robot
+++ /dev/null
@@ -1,332 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
-| Library | resources.libraries.python.honeycomb.HcPersistence
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/vxlan.robot
-| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Resource | resources/libraries/robot/honeycomb/tap.robot
-| Resource | resources/libraries/robot/honeycomb/vhost_user.robot
-| Resource | resources/libraries/robot/honeycomb/sub_interface.robot
-| Variables | resources/test_data/honeycomb/persistence.py | ${interface}
-| Documentation | Keywords used to test Honeycomb persistence.
-
-*** Keywords ***
-| Restart Honeycomb
-| | [Documentation] | Restarts Honeycomb without clearing persistence data.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Restart Honeycomb \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Stop Honeycomb service on DUTs | ${node}
-| | Log Persisted Configuration | ${node}
-| | Configure Honeycomb service on DUTs | ${node}
-
-| Restart VPP
-| | [Documentation] | Restarts VPP and waits until it reconnects with Honeycomb.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Restart VPP \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Restart Vpp Service | ${node}
-| | Verify Vpp | ${node}
-| | VPP Enable Traces On DUT | ${node}
-| | Check VPP connection | ${node}
-
-| Check VPP connection
-| | [Documentation] | Checks if Honeycomb is connected to VPP by reading VPP\
-| | ... | version number from Honeycomb operational data.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Check VPP connection \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Wait until keyword succeeds | 2min | 20sec
-| | ... | Check Honeycomb startup state | ${node}
-
-| Restart Honeycomb and VPP in pesistence test
-| | [Documentation] | Stops Honeycomb, restarts VPP and then starts Honeycomb\
-| | ... | again.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Restart Honeycomb and VPP \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Stop Honeycomb service on DUTs | ${node}
-| | Log Persisted Configuration | ${node}
-| | Restart Vpp Service | ${node}
-| | Verify Vpp | ${node}
-| | VPP Enable Traces On DUT | ${node}
-| | Configure Honeycomb service on DUTs | ${node}
-
-| Multi-Feature Persistence Test Configuration
-| | [Documentation] | Uses Honeycomb to set basic settings for VxLAN,\
-| | ... | bridge domains, TAP, vhost-user and VLAN.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Multi-Feature Persistence Test Configuration \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | Honeycomb sets interface VxLAN configuration
-| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
-| | Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | Honeycomb creates TAP interface
-| | ... | ${node} | ${tap_interface} | ${tap_settings}
-| | Honeycomb creates vhost-user interface
-| | ... | ${node} | ${vhost_interface} | ${vhost_user_client}
-| | Honeycomb creates sub-interface | ${node} | ${interface}
-| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings}
-| | Honeycomb configures interface state | ${node} | ${interface} | up
-| | Honeycomb sets the sub-interface up
-| | ... | ${node} | ${interface} | ${sub_if_id}
-| | Honeycomb adds sub-interface to bridge domain
-| | ... | ${node} | ${interface} | ${sub_if_id} | ${sub_bd_settings}
-| | Honeycomb configures tag rewrite
-| | ... | ${node} | ${interface} | ${sub_if_id} | ${tag_rewrite_pop_1}
-
-| Multi-Feature persistence Test Verification
-| | [Documentation] | Uses Honeycomb and VAT to verify settings for VxLAN,\
-| | ... | bridge domains, TAP, vhost-user and VLAN.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Multi-Feature persistence Test Verification \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | VxLAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
-| | VxLAN Operational Data From VAT Should Be
-| | ... | ${node} | ${vxlan_settings}
-| | Bridge domain Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | Bridge domain Operational Data From VAT Should Be
-| | ... | ${node} | ${0} | ${bd_settings}
-| | TAP Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${tap_interface} | ${tap_settings_oper}
-| | TAP Operational Data From VAT Should Be
-| | ... | ${node} | ${tap_interface_vat} | ${tap_settings_vat}
-| | Vhost-user Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vhost_interface} | ${vhost_user_client}
-| | Vhost-user Operational Data From VAT Should Be
-| | ... | ${node} | ${vhost_user_client}
-| | Sub-interface Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${sub_if_id} | ${sub_if_1_oper}
-| | Sub-interface Operational Data From VAT Should Be
-| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper}
-| | Interface state from Honeycomb should be | ${node} | ${interface} | up
-| | Interface state from VAT should be | ${node} | ${interface} | up
-| | Sub-interface bridge domain Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${sub_if_id} | ${sub_bd_settings}
-| | Sub-interface bridge domain Operational Data From PAPI Should Be
-| | ... | ${node} | ${sub_if_name} | ${sub_bd_settings}
-| | Rewrite tag from Honeycomb should be
-| | ... | ${node} | ${interface} | ${sub_if_id} | ${tag_rewrite_pop_1_oper}
-| | Rewrite tag from VAT should be
-| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_pop_1_VAT}
-| | ${data_conf}= | Get all interfaces cfg data | ${node}
-| | ${data_oper}= | Get all interfaces oper data | ${node}
-| | Compare interface lists | ${data_conf} | ${data_oper}
-
-| Honeycomb and VPP should have default configuration
-| | [Documentation] | Uses Honeycomb and VAT to verify settings for VxLAN,\
-| | ... | bridge domains, TAP, vhost-user and VLAN. Expects default\
-| | ... | configuration.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb and VPP should have default configuration \|
-| | ... | ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | VxLAN Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vx_interface}
-| | VxLAN Operational Data From VAT Should Be empty | ${node}
-| | Honeycomb should show no bridge domains | ${node}
-| | PAPI should show no bridge domains | ${node}
-| | TAP Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${tap_interface}
-| | TAP Operational Data From VAT Should Be empty
-| | ... | ${node} | ${tap_interface}
-| | Vhost-user Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vhost_interface}
-| | Vhost-user Operational Data From VAT Should Be empty
-| | ... | ${node}
-| | interface state from Honeycomb should be
-| | ... | ${node} | ${interface} | down
-| | And interface state from VAT should be
-| | ... | ${node} | ${interface} | down
-
-| Persistence file is damaged during restart
-| | [Documentation] | Shuts down Honeycomb, modifies persistence files to\
-| | ... | simulate damage, then restarts VPP and starts up Honeycomb again.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Persistence file is damaged during restart \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Stop Honeycomb service on DUTs | ${node}
-| | Modify persistence files | ${node} | { | abc
-| | Restart Vpp Service | ${node}
-| | Verify Vpp | ${node}
-| | VPP Enable Traces On DUT | ${node}
-| | Configure Honeycomb service on DUTs | ${node}
-
-| Log persisted configuration on node
-| | [Documentation] | Logs the content of Honeycomb's persitence files.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Log persisted configuration on node \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Log persisted configuration | ${node}
-
-| Interface Persistence Setup
-| | [Documentation] | Configure interface state, ipv4 and ipv6 addresses
-| | ... | and neighbors.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Interface Persistence Setup \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Honeycomb and VPP should have default configuration | ${node}
-| | Import Variables | resources/test_data/honeycomb/interface_ip.py
-| | Honeycomb configures interface state | ${node} | ${interface} | up
-| | Honeycomb sets interface IPv4 address with prefix
-| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
-| | Honeycomb adds interface IPv4 neighbor
-| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac}
-| | Honeycomb sets interface IPv6 address
-| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix}
-| | Honeycomb adds interface IPv6 neighbor
-| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac}
-
-| Interface Persistence Check
-| | [Documentation] | Verify interface state, ipv4 and ipv6 addresses
-| | ... | and neighbors.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Interface Persistence Check \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Interface state from Honeycomb should be | ${node} | ${interface} | up
-| | IPv4 address from Honeycomb should be
-| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
-| | IPv4 address from VAT should be
-| | ... | ${node} | ${interface} | ${ipv4_address}
-| | ... | ${ipv4_prefix} | ${ipv4_mask}
-| | IPv4 neighbor from Honeycomb should be
-| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac}
-| | IPv6 address from Honeycomb should contain
-| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix}
-| | IPv6 address from VAT should contain
-| | ... | ${node} | ${interface} | ${ipv6_address}
-| | ... | ${ipv6_prefix} | ${ipv6_mask}
-| | IPv6 neighbor from Honeycomb should be
-| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac}
-
-| Bridge Domain Persistence Setup
-| | [Documentation] | Configure bridge domain, BD interface assignment
-| | ... | and L2 fib entry.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Bridge Domain Persistence Setup \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Honeycomb and VPP should have default configuration | ${node}
-| | Import Variables | resources/test_data/honeycomb/l2_fib.py
-| | ... | ${node} | ${interface} | ${interface}
-| | Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | Honeycomb adds interface to bridge domain
-| | ... | ${node} | ${interface} | ${bd_name} | ${if_bd_settings}
-| | Honeycomb adds L2 FIB entry to bridge domain
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg}
-
-| Bridge Domain Persistence Check
-| | [Documentation] | Verify bridge domain, BD interface assignment
-| | ... | and L2 fib entry.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Bridge Domain Persistence Check \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Bridge domain Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | Bridge domain Operational Data From VAT Should Be
-| | ... | ${node} | ${0} | ${bd_settings}
-| | Bridge domain Operational Interface Assignment should be
-| | ... | ${node} | ${interface} | ${if_bd_settings}
-| | L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
-| | L2 FIB entry from PAPI should be
-| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
\ No newline at end of file