X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fhoneycomb%2Frouting.robot;fp=resources%2Flibraries%2Frobot%2Fhoneycomb%2Frouting.robot;h=0000000000000000000000000000000000000000;hp=752b4fe29e69ccfff17f0f412453af7cba5b1ba9;hb=e7ad66f3147662973039caaac33015de7e0c6f8c;hpb=20cc67d5f23a7f4e05b08012bf3d3a63be4bcf63 diff --git a/resources/libraries/robot/honeycomb/routing.robot b/resources/libraries/robot/honeycomb/routing.robot deleted file mode 100644 index 752b4fe29e..0000000000 --- a/resources/libraries/robot/honeycomb/routing.robot +++ /dev/null @@ -1,203 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.honeycomb.Routing.RoutingKeywords -| Documentation | Keywords used to test Honeycomb routing. - -*** Keywords *** -| Honeycomb configures routing table -| | [Documentation] | Uses Honeycomb API to configure a routing table. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - name - name for the new routing table. Type: string -| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type:string -| | ... | - data - Settings for the new routing table. Type: dictionary -| | ... | - vrf - vrf-id the new table will belong to. Type: integer -| | ... | - special - Does the table contain special rules. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb configures routing table \| ${nodes['DUT1']} \ -| | ... | \| table1 \| ipv4 \| ${data} \| ${1} \| ${TRUE} \| -| | [Arguments] | ${node} | ${name} | ${ip_version} | ${data} | ${vrf}=${1} -| | ... | ${special}=${EMPTY} -| | Configure routing table | ${node} | ${name} | ${ip_version} | ${data} -| | ... | ${vrf} | ${special} - -| Routing data from Honeycomb should contain -| | [Documentation] | Uses Honeycomb API to retrieve operational data about\ -| | ... | a routing table, and compares with the data provided. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - name - name of the routing table. Type: string -| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type:string -| | ... | - expected_data - Data to compare against. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Routing data from Honeycomb should contain \| ${nodes['DUT1']} \ -| | ... | \| table1 \| ipv4 \| ${data} \| -| | [Arguments] | ${node} | ${name} | ${ip_version} | ${expected_data} -| | ${data}= | Get Routing Table Oper | ${node} | ${name} | ${ip_version} -| | Should Contain | ${data} | ${expected_data} - -| Log routing configuration from VAT -| | [Documentation] | Uses test API to read routing configuration from VPP\ -| | ... | and prints received response into robot log. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Log routing configuration from VAT \| ${nodes['DUT1']} \| -| | [Arguments] | ${node} -| | Log routing configuration | ${node} - -| Honeycomb removes routing configuration -| | [Documentation] | Uses Honeycomb API to remove Honeycomb-created\ -| | ... | routing configuration from the node. Entries configured automatically\ -| | ... | by VPP will not be removed. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - name - name of the routing table to remove. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb removes routing configuration \| ${nodes['DUT1']} \ -| | ... | \| table1 \| -| | [Arguments] | ${node} | ${name} -| | Delete routing table | ${node} | ${name} - -| Verify route IPv4 -| | [Documentation] | Send an ICMP packet from one TG interface and receive\ -| | ... | it on the other TG interface. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - src_ip - IP of source interface (TG-if1). Type: integer -| | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer -| | ... | - tx_port - Source interface (TG-if1). Type: string -| | ... | - tx_mac - MAC address of source interface (TG-if1). Type: string -| | ... | - rx_port - Destionation interface (TG-if2). Type: string -| | ... | - rx_mac - MAC address of DUT interface (DUT-if1). Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Verify route IPv4 \| ${nodes['TG']} \ -| | ... | \| 16.0.0.1 \| 32.0.0.1 \| eth1 \| 08:00:27:cc:4f:54 \ -| | ... | \| eth2 \| 08:00:27:c9:6a:d5 \| -| | ... -| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} -| | ... | ${tx_mac} | ${rx_port} | ${rx_mac} -| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} -| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} -| | ${args}= | Catenate | --src_mac | ${tx_mac} -| | ... | --dst_mac | ${rx_mac} -| | ... | --src_ip | ${src_ip} -| | ... | --dst_ip | ${dst_ip} -| | ... | --tx_if | ${tx_port_name} -| | ... | --rx_if | ${rx_port_name} -| | Run Traffic Script On Node | send_ip_icmp.py | ${tg_node} | ${args} - -| Verify route IPv6 -| | [Documentation] | Send an ICMPv6 packet from one TG interface and receive\ -| | ... | it on the other TG interface. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - src_ip - IP of source interface (TG-if1). Type: integer -| | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer -| | ... | - tx_port - Source interface (TG-if1). Type: string -| | ... | - tx_mac - MAC address of source interface (TG-if1). Type: string -| | ... | - rx_port - Destionation interface (TG-if2). Type: string -| | ... | - rx_mac - MAC address of DUT interface (DUT-if1). Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Verify route IPv6 \| ${nodes['TG']} \ -| | ... | \| 10::1 \| 11::1 \| eth2 \| 08:00:27:cc:4f:54 \ -| | ... | \| eth4 \| 08:00:27:c9:6a:d5 \| -| | ... -| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} -| | ... | ${tx_mac} | ${rx_port} | ${rx_mac} -| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} -| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} -| | ${args}= | Catenate | --src_mac | ${tx_mac} -| | ... | --dst_mac | ${rx_mac} -| | ... | --src_ip | ${src_ip} -| | ... | --dst_ip | ${dst_ip} -| | ... | --tx_if | ${tx_port_name} -| | ... | --rx_if | ${rx_port_name} -| | Run Traffic Script On Node | send_ip_icmp.py | ${tg_node} | ${args} - -| Verify multipath route -| | [Documentation] | Send 100 ICMP or ICMPv6 packets from one TG interface\ -| | ... | and receive them on the other TG interface. Verify destination MAC\ -| | ... | addresses of the packets so that exactly 50 of them use the first\ -| | ... | address and the other 50 use the second address. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - src_ip - IP of source interface (TG-if1). Type: integer -| | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer -| | ... | - tx_port - Source interface (TG-if1). Type: string -| | ... | - tx_src_mac - MAC address of source interface (TG-if1). Type: string -| | ... | - rx_port - Destionation interface (TG-if2). Type: string -| | ... | - tx_dst_mac - MAC address of DUT ingress interface (DUT-if1).\ -| | ... | Type: string -| | ... | - rx_src_mac - MAC address of DUT egress interface (DUT-if2).\ -| | ... | Type: string -| | ... | - rx_dst_mac1 - MAC address of first next-hop option. Type: string -| | ... | - rx_dst_mac2 - MAC address of second next-hop option. Type: string -| | ... | -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Verify multipath route \| ${nodes['TG']} \ -| | ... | \| 16.0.0.1 \| 32.0.0.1 \| eth2 \| 08:00:27:cc:4f:54 \ -| | ... | \| eth4 \| 08:00:27:c9:6a:d5 \| -| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| -| | ... -| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} -| | ... | ${tx_src_mac} | ${rx_port} | ${tx_dst_mac} | ${rx_src_mac} -| | ... | ${rx_dst_mac1} | ${rx_dst_mac2} -| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} -| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} -| | ${args}= | Catenate | --tg_if1_mac | ${tx_src_mac} -| | ... | --dut_if1_mac | ${tx_dst_mac} -| | ... | --src_ip | ${src_ip} -| | ... | --dst_ip | ${dst_ip} -| | ... | --tx_if | ${tx_port_name} -| | ... | --rx_if | ${rx_port_name} -| | ... | --dut_if2_mac | ${rx_src_mac} -| | ... | --path_1_mac | ${rx_dst_mac_1} -| | ... | --path_2_mac | ${rx_dst_mac_2} -| | Run Traffic Script On Node | send_icmp_check_multipath.py | ${tg_node} -| | ... | ${args} \ No newline at end of file