X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fhoneycomb%2Fsub_interface.robot;h=5a42b56d1118b006a57619a7a79177dbd7b5d324;hp=bdadad8b8b7e0f44d284c160e8ffd30ef57f4a56;hb=e3171449c75d948461ac24b0df7212e8a2ca45f9;hpb=49b73e488fc9b4835e51027387d4ca6e1c748b2b

diff --git a/resources/libraries/robot/honeycomb/sub_interface.robot b/resources/libraries/robot/honeycomb/sub_interface.robot
index bdadad8b8b..5a42b56d11 100644
--- a/resources/libraries/robot/honeycomb/sub_interface.robot
+++ b/resources/libraries/robot/honeycomb/sub_interface.robot
@@ -84,7 +84,7 @@
 | | ...
 | | [Arguments] | ${node} | ${super_interface} | ${identifier}
 | | ...
-| | Run keyword and expect error | *KeyError: 'sub-interface'*
+| | Run keyword and expect error | *KeyError: 'vpp-vlan:sub-interfaces'*
 | | ... | interfaceAPI.Get sub interface oper data
 | | ... | ${node} | ${super_interface} | ${identifier}
 
@@ -389,7 +389,8 @@
 | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings}
 | | ${api_data}= | interfaceAPI.Get tag rewrite oper data
 | | ... | ${node} | ${super_if} | ${identifier}
-| | interfaceAPI.Compare Data Structures | ${api_data} | ${settings}
+| | interfaceAPI.Compare Data Structures
+| | ... | ${api_data} | ${settings}
 
 | Rewrite tag from VAT should be
 | | [Documentation] | Retrieves sub-interface configuration through VAT and\
@@ -447,3 +448,240 @@
 | | ...
 | | ${sw_if_index}= | interfaceCLI.Get sw if index | ${node} | ${sub_interface}
 | | L2 tag rewrite | ${node} | ${sw_if_index} | disable
+
+| Honeycomb sets sub-interface ipv4 address
+| | [Documentation] | Uses Honeycomb API to configure an ipv4 address on the\
+| | ... | spcified sub-interface. Replaces any existing ipv4 addresses.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ... | - address - IPv4 address to set. Type: string
+| | ... | - prefix - IPv4 network prefix length to set. Type: integer
+| | ...
+| | ... | *Example:*
+| | ... | \| | Honeycomb sets sub-interface ipv4 address\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
+| | ... | \| 192.168.0.2 \| ${24} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
+| | Add ip address to sub_interface
+| | ... | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | ipv4
+
+| Sub-interface ipv4 address from Honeycomb should be
+| | [Documentation] | Uses Honeycomb API to verify ipv4 address configuration\
+| | ... | on the specified sub-interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ... | - address - IPv4 address to expect. Type: string
+| | ... | - prefix - IPv4 network prefix length to expect. Type: integer
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv4 address from Honeycomb should be\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
+| | ... | \| 192.168.0.2 \| ${24} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
+| | ${if_data}= | interfaceAPI.Get sub interface oper data
+| | ... | ${node} | ${super_if} | ${identifier}
+| | Should be equal
+| | ... | ${if_data['ipv4']['address'][0]['ip']} | ${address}
+| | Should be equal
+| | ... | ${if_data['ipv4']['address'][0]['prefix-length']} | ${prefix}
+
+| Sub-interface ipv4 address from VAT should be
+| | [Documentation] | Uses VAT to verify ipv4 address configuration\
+| | ... | on the specified sub-interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - sub_interface - Name of an sub-interface on the specified node.\
+| | ... | Type: string
+| | ... | - address - IPv4 address to expect. Type: string
+| | ... | - prefix - IPv4 network prefix length to expect. Type: integer
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv4 address from VAT should be\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
+| | ...
+| | [Arguments] | ${node} | ${sub_interface} | ${address} | ${prefix}
+| | ${data}= | interfaceCLI.VPP get interface ip addresses
+| | ... | ${node} | ${sub_interface} | ipv4
+| | Should be equal | ${data[0]['ip']} | ${address}
+| | Should be equal | ${data[0]['prefix_length']} | ${prefix}
+
+| Honeycomb removes all sub-interface ipv4 addresses
+| | [Documentation] | Uses Honeycomb API to remove all configured ipv4\
+| | ... | addresses from the sub-interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ...
+| | ... | *Example:*
+| | ... | \| Honeycomb removes all sub-interface ipv4 addresses\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier}
+| | Remove all ip addresses from sub_interface
+| | ... | ${node} | ${super_if} | ${identifier} | ipv4
+
+| Sub-interface ipv4 address from Honeycomb should be empty
+| | [Documentation] | Uses Honeycomb API to verify that ipv4 address\
+| | ... | configuration on the specified sub-interface is empty.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv4 address from Honeycomb should be empty\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier}
+| | ${if_data}= | interfaceAPI.Get sub interface oper data
+| | ... | ${node} | ${super_if} | ${identifier}
+| | Run keyword and expect error | *KeyError: 'ipv4'*
+| | ... | Set Variable | ${if_data['ipv4']['address'][0]['ip']}
+
+| Sub-interface ipv4 address from VAT should be empty
+| | [Documentation] | Uses VAT to verify that ipv4 address\
+| | ... | configuration on the specified sub-interface is empty.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - sub_interface - Name of an sub-interface on the specified node.\
+| | ... | Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv4 address from VAT should be empty\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
+| | ...
+| | [Arguments] | ${node} | ${sub_interface}
+| | Run keyword and expect error | *No JSON object could be decoded*
+| | ... | interfaceCLI.VPP get interface ip addresses
+| | ... | ${node} | ${sub_interface} | ipv4
+
+| Honeycomb sets sub-interface ipv6 address
+| | [Documentation] | Uses Honeycomb API to configure an ipv6 address on the\
+| | ... | spcified sub-interface. Replaces any existing ipv6 addresses.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ... | - address - IPv6 address to set. Type: string
+| | ... | - prefix - IPv6 network prefix length to set. Type: integer
+| | ...
+| | ... | *Example:*
+| | ... | \| | Honeycomb sets sub-interface ipv6 address\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
+| | ... | \| 10::10 \| ${64} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
+| | Add ip address to sub_interface
+| | ... | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | ipv6
+
+| Sub-interface IPv6 address from Honeycomb should contain
+| | [Documentation] | Uses Honeycomb API to verify ipv6 address configuration\
+| | ... | on the specified sub-interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ... | - address - IPv6 address to expect. Type: string
+| | ... | - prefix - IPv6 network prefix length to expect. Type: integer
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface IPv6 address from Honeycomb should contain\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
+| | ... | \| 10::10 \| ${64} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
+| | ${if_data}= | interfaceAPI.Get sub interface oper data
+| | ... | ${node} | ${super_if} | ${identifier}
+| | ${settings}= | Create Dictionary
+| | ... | ip=${address} | prefix-length=${prefix}
+| | Should contain | ${if_data['ipv6']['address']} | ${settings}
+
+| Sub-interface IPv6 address from VAT should contain
+| | [Documentation] | Uses VAT to verify ipv6 address configuration\
+| | ... | on the specified sub-interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - sub_interface - Name of an sub-interface on the specified node.\
+| | ... | Type: string
+| | ... | - address - IPv6 address to expect. Type: string
+| | ... | - prefix - IPv6 network prefix length to expect. Type: integer
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface IPv6 address from VAT should contain\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
+| | ...
+| | [Arguments] | ${node} | ${sub_interface} | ${address} | ${prefix}
+| | ${data}= | interfaceCLI.VPP get interface ip addresses
+| | ... | ${node} | ${sub_interface} | ipv6
+| | Should be equal | ${data[0]['ip']} | ${address}
+| | Should be equal | ${data[0]['prefix_length']} | ${prefix}
+
+| Honeycomb removes all sub-interface ipv6 addresses
+| | [Documentation] | Uses Honeycomb API to remove all configured ipv6\
+| | ... | addresses from the sub-interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ...
+| | ... | *Example:*
+| | ... | \| Honeycomb removes all sub-interface ipv6 addresses\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier}
+| | Remove all ip addresses from sub_interface
+| | ... | ${node} | ${super_if} | ${identifier} | ipv6
+
+| Sub-interface ipv6 address from Honeycomb should be empty
+| | [Documentation] | Uses Honeycomb API to verify that ipv6 address\
+| | ... | configuration on the specified sub-interface is empty.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - identifier - Sub-interface ID. Type: integer or string
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv6 address from Honeycomb should be empty\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${identifier}
+| | ${if_data}= | interfaceAPI.Get sub interface oper data
+| | ... | ${node} | ${super_if} | ${identifier}
+| | Run keyword and expect error | *KeyError: 'ipv6'*
+| | ... | Set Variable | ${if_data['ipv6']['address'][0]['ip']}
+
+| Sub-interface ipv6 address from VAT should be empty
+| | [Documentation] | Uses VAT to verify that ipv6 address\
+| | ... | configuration on the specified sub-interface is empty.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - sub_interface - Name of an sub-interface on the specified node.\
+| | ... | Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| sub-interface ipv6 address from VAT should be empty\
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
+| | ...
+| | [Arguments] | ${node} | ${sub_interface}
+| | Run keyword and expect error | *No JSON object could be decoded*
+| | ... | interfaceCLI.VPP get interface ip addresses
+| | ... | ${node} | ${sub_interface} | ipv6