X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fipv4.robot;fp=resources%2Flibraries%2Frobot%2Fipv4.robot;h=0000000000000000000000000000000000000000;hp=3fa522f5c53df489ed46a1ea913673226960b591;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hpb=859157b5db45927c7b4bb0b2d575e68805777a86

diff --git a/resources/libraries/robot/ipv4.robot b/resources/libraries/robot/ipv4.robot
deleted file mode 100644
index 3fa522f5c5..0000000000
--- a/resources/libraries/robot/ipv4.robot
+++ /dev/null
@@ -1,160 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/counters.robot
-| Library | resources.libraries.python.IPv4Util.IPv4Util
-| Library | resources.libraries.python.IPv4Setup.IPv4Setup
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Routing
-| Library | resources.libraries.python.TrafficScriptExecutor
-| Library | resources.libraries.python.InterfaceUtil
-| Variables | resources/libraries/python/IPv4NodeAddress.py | ${nodes}
-
-*** Keywords ***
-
-| Configure IPv4 addresses on all DUTs
-| | [Documentation] | Setup IPv4 address on all DUTs in topology
-| | [Arguments] | ${nodes} | ${nodes_addr}
-| | ${interfaces}= | VPP nodes set ipv4 addresses | ${nodes} | ${nodes_addr}
-| | :FOR | ${interface} | IN | @{interfaces}
-| | | Set Interface State | @{interface} | up | if_type=name
-
-| Configure routes for IPv4 test
-| | [Documentation] | Setup routing on all VPP nodes required for IPv4 tests
-| | [Arguments] | ${nodes} | ${nodes_addr}
-| | Append Nodes | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | Compute Path
-| | ${tg}= | Set Variable | ${nodes['TG']}
-| | ${dut1_if} | ${dut1}= | First Interface
-| | ${dut2_if} | ${dut2}= | Last Interface
-| | ${dut1_if_addr}= | Get IPv4 address of node "${dut1}" interface "${dut1_if}" from "${nodes_addr}"
-| | ${dut2_if_addr}= | Get IPv4 address of node "${dut2}" interface "${dut2_if}" from "${nodes_addr}"
-| | @{tg_dut1_links}= | Get active links connecting "${tg}" and "${dut1}"
-| | @{tg_dut2_links}= | Get active links connecting "${tg}" and "${dut2}"
-| | :FOR | ${link} | IN | @{tg_dut1_links}
-| | | ${net}= | Get Link Address | ${link} | ${nodes_addr}
-| | | ${prefix}= | Get Link Prefix | ${link} | ${nodes_addr}
-| | | Vpp Route Add | ${dut2} | ${net} | ${prefix} | ${dut1_if_addr} | ${dut2_if}
-| | :FOR | ${link} | IN | @{tg_dut2_links}
-| | | ${net}= | Get Link Address | ${link} | ${nodes_addr}
-| | | ${prefix}= | Get Link Prefix | ${link} | ${nodes_addr}
-| | | Vpp Route Add | ${dut1} | ${net} | ${prefix} | ${dut2_if_addr} | ${dut1_if}
-
-| Configure DUT nodes for IPv4 testing
-| | Configure IPv4 addresses on all DUTs | ${nodes} | ${nodes_ipv4_addr}
-| | Setup ARP on all DUTs | ${nodes} | ${nodes_ipv4_addr}
-| | Configure routes for IPv4 test | ${nodes} | ${nodes_ipv4_addr}
-| | All Vpp Interfaces Ready Wait | ${nodes}
-
-| Route traffic from interface '${from_port}' on node '${from_node}' to interface '${to_port}' on node '${to_node}' '${hops}' hops away using IPv4
-| | ${src_ip}= | Get IPv4 address of node "${from_node}" interface "${from_port}" from "${nodes_ipv4_addr}"
-| | ${dst_ip}= | Get IPv4 address of node "${to_node}" interface "${to_port}" from "${nodes_ipv4_addr}"
-| | ${src_mac}= | Get interface mac | ${from_node} | ${from_port}
-| | ${dst_mac}= | Get interface mac | ${to_node} | ${to_port}
-| | ${is_dst_tg}= | Is TG node | ${to_node}
-| | ${adj_node} | ${adj_int}= | Get adjacent node and interface | ${nodes} | ${from_node} | ${from_port}
-| | ${from_port_name}= | Get interface name | ${from_node} | ${from_port}
-| | ${to_port_name}= | Get interface name | ${to_node} | ${to_port}
-| | ${adj_int_mac}= | Get interface MAC | ${adj_node} | ${adj_int}
-| | ${args}= | Traffic Script Gen Arg | ${to_port_name} | ${from_port_name} | ${src_mac}
-| |          | ...                    | ${dst_mac} | ${src_ip} | ${dst_ip}
-| | ${args}= | Catenate | ${args} | --hops ${hops} | --first_hop_mac ${adj_int_mac}
-| |          | ...      | --is_dst_tg ${is_dst_tg}
-| | Run Traffic Script On Node | ipv4_ping_ttl_check.py | ${from_node} | ${args}
-
-| Execute IPv4 ICMP echo sweep
-| | [Documentation] | Type of the src_node must be TG and dst_node must be DUT
-| | [Arguments] | ${src_node} | ${dst_node} | ${start_size} | ${end_size} | ${step}
-| | Append Nodes | ${src_node} | ${dst_node}
-| | Compute Path
-| | ${src_port} | ${src_node}= | First Interface
-| | ${dst_port} | ${dst_node}= | Last Interface
-| | ${src_ip}= | Get IPv4 address of node "${src_node}" interface "${src_port}" from "${nodes_ipv4_addr}"
-| | ${dst_ip}= | Get IPv4 address of node "${dst_node}" interface "${dst_port}" from "${nodes_ipv4_addr}"
-| | ${src_mac}= | Get Interface Mac | ${src_node} | ${src_port}
-| | ${dst_mac}= | Get Interface Mac | ${dst_node} | ${dst_port}
-| | ${src_port_name}= | Get interface name | ${src_node} | ${src_port}
-| | ${args}= | Traffic Script Gen Arg | ${src_port_name} | ${src_port_name}
-| |          | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip}
-| | ${args}= | Set Variable
-| | ... | ${args} --start_size ${start_size} --end_size ${end_size} --step ${step}
-| | Run Traffic Script On Node | ipv4_sweep_ping.py | ${src_node} | ${args}
-| | ... | timeout=${180}
-
-| Send ARP request and verify response
-| | [Arguments] | ${tg_node} | ${vpp_node}
-| | ${link_name}= | Get first active connecting link between node "${tg_node}" and "${vpp_node}"
-| | ${src_if}= | Get interface by link name | ${tg_node} | ${link_name}
-| | ${dst_if}= | Get interface by link name | ${vpp_node} | ${link_name}
-| | ${src_ip}= | Get IPv4 address of node "${tg_node}" interface "${src_if}" from "${nodes_ipv4_addr}"
-| | ${dst_ip}= | Get IPv4 address of node "${vpp_node}" interface "${dst_if}" from "${nodes_ipv4_addr}"
-| | ${src_mac}= | Get node link mac | ${tg_node} | ${link_name}
-| | ${dst_mac}= | Get node link mac | ${vpp_node} | ${link_name}
-| | ${src_if_name}= | Get interface name | ${tg_node} | ${src_if}
-| | ${args}= | Traffic Script Gen Arg | ${src_if_name} | ${src_if_name} | ${src_mac}
-| |          | ...                    | ${dst_mac} | ${src_ip} | ${dst_ip}
-| | Run Traffic Script On Node | arp_request.py | ${tg_node} | ${args}
-
-| Configure IP addresses on interfaces
-| | [Documentation] | Iterates through @{args} list and Set Interface Address
-| | ... | for every (${dut_node}, ${interface}, ${address},
-| | ... | ${prefix}) tuple.
-| | ...
-| | ... | *Arguments:*
-| | ... | - ${dut_node} - Node where IP address should be set to.
-| | ... | Type: dictionary
-| | ... | - ${interface} - Interface name. Type: string
-| | ... | - ${address} - IP address. Type: string
-| | ... | - ${prefix} - Prefix length. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Configure IP addresses on interfaces \
-| | ... | \| ${dut1_node} \| ${dut1_to_dut2} \| 192.168.1.1 \| 24 \|
-| | ... | \| ... \| ${dut1_node} \| ${dut1_to_tg}   \| 192.168.2.1 \| 24 \|
-| | ...
-| | [Arguments] | @{args}
-| | :FOR | ${dut_node} | ${interface} | ${address} | ${prefix} | IN | @{args}
-| | | Set Interface Address | ${dut_node} | ${interface} | ${address}
-| | | ... | ${prefix}
-
-| Send ICMP echo request and verify answer
-| | [Documentation] | Run traffic script that waits for ICMP reply and ignores
-| | ... | all other packets.
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_node - TG node where run traffic script. Type: dictionary
-| | ... | - tg_interface - TG interface where send ICMP echo request.
-| | ... | Type: string
-| | ... | - dst_mac - Destination MAC address. Type: string
-| | ... | - src_mac - Source MAC address. Type: string
-| | ... | - dst_ip - Destination IP address. Type: string
-| | ... | - src_ip - Source IP address. Type: string
-| | ... | - timeout - Wait timeout in seconds (Default: 10). Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send ICMP echo request and verify answer \
-| | ... | \| ${nodes['TG']} \| eth2 \
-| | ... | \| 08:00:27:46:2b:4c \| 08:00:27:66:b8:57 \
-| | ... | \| 192.168.23.10 \| 192.168.23.1 \| 10 \|
-| | ...
-| | [Arguments] | ${tg_node} | ${tg_interface}
-| | ... | ${dst_mac} | ${src_mac} | ${dst_ip} | ${src_ip} | ${timeout}=${10}
-| | ${tg_interface_name}= | Get interface name | ${tg_node} | ${tg_interface}
-| | ${args}= | Catenate | --rx_if | ${tg_interface_name} | --tx_if | ${tg_interface_name}
-| | ... | --dst_mac | ${dst_mac} | --src_mac | ${src_mac}
-| | ... | --dst_ip | ${dst_ip} | --src_ip | ${src_ip} | --timeout | ${timeout}
-| | Run Traffic Script On Node | send_icmp_wait_for_reply.py
-| | ... | ${tg_node} | ${args}