X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance.robot;h=39ea14cd7a9c486a70b08354ed7635752468f43c;hp=e19b8cfbde73a9a48d8d8cb6e5145d739219d743;hb=adae22c83eb77a49a49f9ee50ef11c1a67239d4e;hpb=2415648fb8c852ca5f01ac37c5b36440472d6b18 diff --git a/resources/libraries/robot/performance.robot b/resources/libraries/robot/performance.robot index e19b8cfbde..39ea14cd7a 100644 --- a/resources/libraries/robot/performance.robot +++ b/resources/libraries/robot/performance.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -12,6 +12,7 @@ # limitations under the License. *** Settings *** +| Library | Collections | Library | resources.libraries.python.topology.Topology | Library | resources.libraries.python.NodePath | Library | resources.libraries.python.DpdkUtil @@ -27,6 +28,7 @@ | Resource | resources/libraries/robot/ipv4.robot | Resource | resources/libraries/robot/ipv6.robot | Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/tagging.robot | Documentation | Performance suite keywords *** Keywords *** @@ -44,8 +46,10 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Calculate pps \| 10000000000 | 64 +| | ... | \| Calculate pps \| 10000000000 \| 64 \| +| | ... | | [Arguments] | ${bps} | ${framesize} +| | ... | | ${framesize}= | Get Frame Size | ${framesize} | | ${ret}= | Evaluate | (${bps}/((${framesize}+20)*8)).__trunc__() | | Return From Keyword | ${ret} @@ -61,25 +65,14 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Get Frame Size \| IMIX_v4_1 +| | ... | \| Get Frame Size \| IMIX_v4_1 \| +| | ... | | [Arguments] | ${framesize} +| | ... | | Run Keyword If | '${framesize}' == 'IMIX_v4_1' -| | ... | Return From Keyword | 353.83333 +| | ... | Return From Keyword | 353.83333 | | Return From Keyword | ${framesize} -| Setup performance global Variables -| | [Documentation] -| | ... | Setup suite Variables. Variables are used across performance testing. -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - glob_loss_acceptance - Loss acceptance treshold -| | ... | - glob_loss_acceptance_type - Loss acceptance treshold type -| | ... | - glob_vm_image - Guest VM disk image -| | ... -| | Set Suite Variable | ${glob_loss_acceptance} | 0.5 -| | Set Suite Variable | ${glob_loss_acceptance_type} | percentage -| | Set Suite Variable | ${glob_vm_image} | /var/lib/vm/csit-nested-1.5.img - | 2-node circular Topology Variables Setup | | [Documentation] | | ... | Compute path for testing on two given nodes in circular @@ -94,11 +87,11 @@ | | ... | - dut1_if2 - 2nd DUT interface towards TG. | | ... | | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Compute Path -| | ${tg_if1} | ${tg}= | Next Interface -| | ${dut1_if1} | ${dut1}= | Next Interface -| | ${dut1_if2} | ${dut1}= | Next Interface -| | ${tg_if2} | ${tg}= | Next Interface +| | Compute Path | always_same_link=${FALSE} +| | ${tg_if1} | ${tg}= | First Interface +| | ${dut1_if1} | ${dut1}= | First Ingress Interface +| | ${dut1_if2} | ${dut1}= | Last Egress Interface +| | ${tg_if2} | ${tg}= | Last Interface | | Set Suite Variable | ${tg} | | Set Suite Variable | ${tg_if1} | | Set Suite Variable | ${tg_if2} @@ -119,11 +112,11 @@ | | ... | - dut1_if1 - DUT1 interface towards TG. | | ... | - dut1_if2 - DUT1 interface towards DUT2. | | ... | - dut2 - DUT2 node -| | ... | - dut2_if1 - DUT2 interface towards TG. -| | ... | - dut2_if2 - DUT2 interface towards DUT1. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. | | ... | | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} -| | ... | ${nodes['TG']} +| | ... | ${nodes['TG']} | | Compute Path | | ${tg_if1} | ${tg}= | Next Interface | | ${dut1_if1} | ${dut1}= | Next Interface @@ -162,16 +155,18 @@ | | ... | | ... | \| 2-node circular Topology Variables Setup with DUT interface model \ | | ... | \| Intel-X520-DA2 \| +| | ... | | [Arguments] | ${iface_model} +| | ... | | ${iface_model_list}= | Create list | ${iface_model} | | Append Node | ${nodes['TG']} | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} | | Append Node | ${nodes['TG']} -| | Compute Path -| | ${tg_if1} | ${tg}= | Next Interface -| | ${dut1_if1} | ${dut1}= | Next Interface -| | ${dut1_if2} | ${dut1}= | Next Interface -| | ${tg_if2} | ${tg}= | Next Interface +| | Compute Path | always_same_link=${FALSE} +| | ${tg_if1} | ${tg}= | First Interface +| | ${dut1_if1} | ${dut1}= | First Ingress Interface +| | ${dut1_if2} | ${dut1}= | Last Egress Interface +| | ${tg_if2} | ${tg}= | Last Interface | | Set Suite Variable | ${tg} | | Set Suite Variable | ${tg_if1} | | Set Suite Variable | ${tg_if2} @@ -203,7 +198,9 @@ | | ... | | ... | \| 3-node circular Topology Variables Setup with DUT interface model \ | | ... | \| Intel-X520-DA2 \| +| | ... | | [Arguments] | ${iface_model} +| | ... | | ${iface_model_list}= | Create list | ${iface_model} | | Append Node | ${nodes['TG']} | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} @@ -247,6 +244,49 @@ | | Vpp Node Interfaces Ready Wait | ${dut1} | | Vpp Node Interfaces Ready Wait | ${dut2} +| IPsec initialized in a 3-node circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular +| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP +| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG and +| | ... | DUT1-DUT2 links. Set routing for encrypted traffic on both DUT nodes +| | ... | with prefix /8 and next hop of neighbour DUT or TG interface IPv4 +| | ... | address. +| | ... +| | VPP Show Crypto Device Mapping | ${dut1} +| | VPP Show Crypto Device Mapping | ${dut2} +| | VPP interfaces in path are up in a 3-node circular topology +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if1_mac}= | Get Interface MAC | ${dut1} | ${dut1_if1} +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ${dut2_if2_mac}= | Get Interface MAC | ${dut2} | ${dut2_if2} +| | Set Interface State | ${dut1} | ${dut1_if1} | up +| | Set Interface State | ${dut1} | ${dut1_if2} | up +| | Set Interface State | ${dut2} | ${dut2_if1} | up +| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set Test Variable | ${tg_if1_mac} +| | Set Test Variable | ${tg_if2_mac} +| | Set Test Variable | ${dut1_if1_mac} +| | Set Test Variable | ${dut1_if2_mac} +| | Set Test Variable | ${dut2_if1_mac} +| | Set Test Variable | ${dut2_if2_mac} +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if1} | ${dut1_if1_ip4} +| | ... | 24 +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | ${dut1_if2_ip4} +| | ... | 24 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | ${dut2_if1_ip4} +| | ... | 24 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if2} | ${dut2_if2_ip4} +| | ... | 24 +| | Add arp on dut | ${dut1} | ${dut1_if1} | ${tg_if1_ip4} | ${tg_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | ${dut2_if1_ip4} | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | ${tg_if2_ip4} | ${tg_if2_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | ${dut1_if2_ip4} | ${dut1_if2_mac} +| | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | ${tg_if1_ip4} | ${dut1_if1} +| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | ${tg_if2_ip4} | ${dut2_if2} + | IPv4 forwarding initialized in a 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular @@ -275,6 +315,24 @@ | | dut2_v4.set_route | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} | | All Vpp Interfaces Ready Wait | ${nodes} +| IPv4 forwarding initialized in a 2-node switched topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular +| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP +| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and +| | ... | /30 prefix on DUT1 link. Set routing on DUT node with prefix /24 and +| | ... | next hop of neighbour DUT interface IPv4 address. +| | ... +| | Set Interface State | ${dut1} | ${dut1_if1} | up +| | Set Interface State | ${dut1} | ${dut1_if2} | up +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.3 | ${tg1_if1_mac} +| | dut1_v4.set_arp | ${dut1_if2} | 20.20.20.3 | ${tg1_if2_mac} +| | dut1_v4.set_ip | ${dut1_if1} | 10.10.10.2 | 24 +| | dut1_v4.set_ip | ${dut1_if2} | 20.20.20.2 | 24 +| | All Vpp Interfaces Ready Wait | ${nodes} + | Scale IPv4 forwarding initialized in a 3-node circular topology | | [Documentation] | | ... | Custom setup of IPv4 topology with scalability of ip routes on all @@ -290,7 +348,9 @@ | | ... | | ... | \| Scale IPv4 forwarding initialized in a 3-node circular topology \ | | ... | \| 100000 \| +| | ... | | [Arguments] | ${count} +| | ... | | Set Interface State | ${dut1} | ${dut1_if1} | up | | Set Interface State | ${dut1} | ${dut1_if2} | up | | Set Interface State | ${dut2} | ${dut2_if1} | up @@ -308,13 +368,13 @@ | | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 | | IP addresses are set on interfaces | ${dut2} | ${dut2_if2} | 3.3.3.2 | 30 | | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | 1.1.1.1 | ${dut1_if1} -| | ... | count=${count} +| | ... | count=${count} | | Vpp Route Add | ${dut1} | 20.0.0.0 | 32 | 2.2.2.2 | ${dut1_if2} -| | ... | count=${count} +| | ... | count=${count} | | Vpp Route Add | ${dut2} | 10.0.0.0 | 32 | 2.2.2.1 | ${dut2_if1} -| | ... | count=${count} +| | ... | count=${count} | | Vpp Route Add | ${dut2} | 20.0.0.0 | 32 | 3.3.3.1 | ${dut2_if2} -| | ... | count=${count} +| | ... | count=${count} | | All Vpp Interfaces Ready Wait | ${nodes} | IPv4 forwarding with vhost initialized in a 3-node circular topology @@ -339,18 +399,18 @@ | | ... | | ... | \| IPv4 forwarding with vhost initialized in a 3-node circular \ | | ... | topology \| /tmp/sock1 \| /tmp/sock2 \| +| | ... | | [Arguments] | ${sock1} | ${sock2} +| | ... | | VPP interfaces in path are up in a 3-node circular topology | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} -| | ... | ${sock1} -| | ... | ${sock2} +| | ... | ${sock1} | ${sock2} | | ${dut1_vif1}= | Set Variable | ${vhost_if1} | | ${dut1_vif2}= | Set Variable | ${vhost_if2} | | Set Interface State | ${dut1} | ${dut1_vif1} | up | | Set Interface State | ${dut1} | ${dut1_vif2} | up | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} -| | ... | ${sock1} -| | ... | ${sock2} +| | ... | ${sock1} | ${sock2} | | ${dut2_vif1}= | Set Variable | ${vhost_if1} | | ${dut2_vif2}= | Set Variable | ${vhost_if2} | | Set Interface State | ${dut2} | ${dut2_vif1} | up @@ -412,21 +472,13 @@ | | Set Test Variable | ${dut2_vif1_mac} | | Set Test Variable | ${dut2_vif2_mac} | | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} -| | ... | vrf=${fib_table_1} | | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} -| | ... | vrf=${fib_table_2} | | Add arp on dut | ${dut1} | ${dut1_vif1} | 4.4.4.2 | 52:54:00:00:04:01 -| | ... | vrf=${fib_table_1} | | Add arp on dut | ${dut1} | ${dut1_vif2} | 5.5.5.2 | 52:54:00:00:04:02 -| | ... | vrf=${fib_table_2} | | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} -| | ... | vrf=${fib_table_1} | | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.2 | ${tg1_if2_mac} -| | ... | vrf=${fib_table_2} | | Add arp on dut | ${dut2} | ${dut2_vif1} | 4.4.4.2 | 52:54:00:00:04:01 -| | ... | vrf=${fib_table_1} | | Add arp on dut | ${dut2} | ${dut2_vif2} | 5.5.5.2 | 52:54:00:00:04:02 -| | ... | vrf=${fib_table_2} | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 4.4.4.2 | ${dut1_vif1} | | ... | vrf=${fib_table_1} | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1} @@ -444,6 +496,158 @@ | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 5.5.5.2 | ${dut2_vif2} | | ... | vrf=${fib_table_2} +| IPv4 forwarding with Vhost-User for '${nr}' VMs initialized in a 3-node circular topology +| | [Documentation] +| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all +| | ... | VPP nodes. Set UP state of all VPP interfaces in path. Create ${nr}+1 +| | ... | FIB tables on each DUT with multipath routing. Assign each Virtual +| | ... | interface to FIB table with Physical interface or Virtual interface on +| | ... | both nodes. Setup IPv4 addresses with /30 prefix on DUT-TG links and +| | ... | /30 prefix on DUT1-DUT2 link. Set routing on all DUT nodes in all FIB +| | ... | tables with prefix /24 and next hop of neighbour IPv4 address. Setup +| | ... | ARP on all VPP interfaces. +| | ... +| | ... | *Arguments:* +| | ... | _None_ +| | ... +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /tmp/sock-${VM_ID}-1 +| | ... | - /tmp/sock-${VM_ID}-2 +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| IPv4 forwarding with Vhost-User for '2' VMs initialized in \ +| | ... | a 3-node circular topology \| +| | ... +| | VPP interfaces in path are up in a 3-node circular topology +| | ${fib_table_1}= | Set Variable | ${101} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nr} +| | ${dut1_if1_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if1} +| | ${dut1_if2_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if2} +| | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_1} +| | ... | via 1.1.1.2 sw_if_index ${dut1_if1_idx} multipath +| | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_2} +| | ... | via 2.2.2.2 sw_if_index ${dut1_if2_idx} multipath +| | ${dut2_if1_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if1} +| | ${dut2_if2_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if2} +| | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_1} +| | ... | via 2.2.2.1 sw_if_index ${dut2_if1_idx} multipath +| | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_2} +| | ... | via 3.3.3.2 sw_if_index ${dut2_if2_idx} multipath +| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} +| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} +| | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1} +| | Assign Interface To Fib Table | ${dut2} | ${dut2_if2} | ${fib_table_2} +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if2} | 3.3.3.1 | 30 +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.2 | ${tg1_if2_mac} +| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1} +| | ... | vrf=${fib_table_1} +| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 2.2.2.2 | ${dut1_if2} +| | ... | vrf=${fib_table_2} +| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 2.2.2.1 | ${dut2_if1} +| | ... | vrf=${fib_table_1} +| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | 3.3.3.2 | ${dut2_if2} +| | ... | vrf=${fib_table_2} +| | ${ip_base_start}= | Set Variable | ${4} +| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${fib_table_1}= | Evaluate | ${100}+${number} +| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} +| | | ${ip_base_vif1}= | Evaluate | ${ip_base_start}+(${number}-1)*2 +| | | ${ip_base_vif2}= | Evaluate | ${ip_base_vif1}+1 +| | | ${ip_net_vif1}= | Set Variable +| | | ... | ${ip_base_vif1}.${ip_base_vif1}.${ip_base_vif1} +| | | ${ip_net_vif2}= | Set Variable +| | | ... | ${ip_base_vif2}.${ip_base_vif2}.${ip_base_vif2} +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} +| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 +| | | ... | dut1-vhost-${number}-if2 +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up +| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if1} +| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if2} +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} +| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 +| | | ... | dut2-vhost-${number}-if2 +| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if1} | up +| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up +| | | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} +| | | ... | ${dut2-vhost-${number}-if1} +| | | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} +| | | ... | ${dut2-vhost-${number}-if2} +| | | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_1} +| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut1_vif1_idx} multipath +| | | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_2} +| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut1_vif2_idx} multipath +| | | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_1} +| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut2_vif1_idx} multipath +| | | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_2} +| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut2_vif2_idx} multipath +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${fib_table_1} +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${fib_table_2} +| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if1} +| | | ... | ${fib_table_1} +| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if2} +| | | ... | ${fib_table_2} +| | | IP addresses are set on interfaces +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 +| | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} +| | | ... | ${dut1_vif1_idx} +| | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} +| | | ... | ${dut1_vif2_idx} +| | | ${dut2_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut2} +| | | ... | ${dut2_vif1_idx} +| | | ${dut2_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut2} +| | | ... | ${dut2_vif2_idx} +| | | Set Test Variable | ${dut1-vhost-${number}-if1_mac} +| | | ... | ${dut1_vif1_mac} +| | | Set Test Variable | ${dut1-vhost-${number}-if2_mac} +| | | ... | ${dut1_vif2_mac} +| | | Set Test Variable | ${dut2-vhost-${number}-if1_mac} +| | | ... | ${dut2_vif1_mac} +| | | Set Test Variable | ${dut2-vhost-${number}-if2_mac} +| | | ... | ${dut2_vif2_mac} +| | | ${qemu_id}= | Set Variable If | ${number} < 10 | 0${number} +| | | ... | ${number} +| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 +| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 +| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if1} +| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 +| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if2} +| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 +| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 +| | | ... | ${dut1-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 +| | | ... | ${dut1-vhost-${number}-if2} | vrf=${fib_table_2} +| | | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 +| | | ... | ${dut2-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 +| | | ... | ${dut2-vhost-${number}-if2} | vrf=${fib_table_2} + | IPv4 policer 2r3c-${t} initialized in a 3-node circular topology | | [Documentation] | | ... | Setup of 2r3c color-aware or color-blind policer with dst ip match @@ -514,7 +718,9 @@ | | ... | | ... | \| Scale IPv6 forwarding initialized in a 3-node circular topology \ | | ... | \| 100000 \| +| | ... | | [Arguments] | ${count} +| | ... | | ${subn_prefix}= | Set Variable | 64 | | ${host_prefix}= | Set Variable | 128 | | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:3::1 | ${subn_prefix} @@ -531,13 +737,13 @@ | | Add Ip Neighbor | ${dut2} | ${dut2_if1} | 2001:4::1 | ${dut1_if2_mac} | | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:5::2 | ${tg1_if2_mac} | | Vpp Route Add | ${dut1} | 2001:2::0 | ${host_prefix} | 2001:4::2 -| | ... | interface=${dut1_if2} | count=${count} +| | ... | interface=${dut1_if2} | count=${count} | | Vpp Route Add | ${dut1} | 2001:1::0 | ${host_prefix} | 2001:3::2 -| | ... | interface=${dut1_if1} | count=${count} +| | ... | interface=${dut1_if1} | count=${count} | | Vpp Route Add | ${dut2} | 2001:1::0 | ${host_prefix} | 2001:4::1 -| | ... | interface=${dut2_if1} | count=${count} +| | ... | interface=${dut2_if1} | count=${count} | | Vpp Route Add | ${dut2} | 2001:2::0 | ${host_prefix} | 2001:5::2 -| | ... | interface=${dut2_if2} | count=${count} +| | ... | interface=${dut2_if2} | count=${count} | IPv6 iAcl whitelist initialized in a 3-node circular topology | | [Documentation] @@ -577,19 +783,17 @@ | | ... | interfaces. | | ... | | VPP interfaces in path are up in a 3-node circular topology -| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 -| | ... | 24 -| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 -| | ... | 24 +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | Add arp on dut | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} | | Add arp on dut | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 -| | ... | 172.16.0.1 | 172.16.0.2 +| | ... | 172.16.0.1 | 172.16.0.2 | | L2 setup xconnect on DUT | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 -| | ... | 172.16.0.2 | 172.16.0.1 +| | ... | 172.16.0.2 | 172.16.0.1 | | L2 setup xconnect on DUT | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} | L2 xconnect with Vhost-User initialized in a 3-node circular topology @@ -604,26 +808,103 @@ | | ... | *Example:* | | ... | | ... | \| L2 xconnect with Vhost-User initialized in a 3-node \ -| | ... | circular topology \| /tmp/sock1 \| /tmp/sock2 \| +| | ... | circular topology \| /tmp/sock1 \| /tmp/sock2 \| +| | ... | | [Arguments] | ${sock1} | ${sock2} +| | ... | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} -| | ... | ${sock1} -| | ... | ${sock2} +| | ... | ${sock1} | ${sock2} | | L2 setup xconnect on DUT | ${dut1} | ${dut1_if1} | ${vhost_if1} | | L2 setup xconnect on DUT | ${dut1} | ${dut1_if2} | ${vhost_if2} | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} -| | ... | ${sock1} -| | ... | ${sock2} +| | ... | ${sock1} | ${sock2} | | L2 setup xconnect on DUT | ${dut2} | ${dut2_if1} | ${vhost_if1} | | L2 setup xconnect on DUT | ${dut2} | ${dut2_if2} | ${vhost_if2} | | All Vpp Interfaces Ready Wait | ${nodes} +| L2 xconnect with Vhost-User for '${nr}' initialized in a 3-node circular topology +| | [Documentation] +| | ... | Create pairs of Vhost-User interfaces on all defined VPP nodes. Cross +| | ... | connect each Vhost interface with one physical interface or virtual +| | ... | interface to create a chain accross DUT node. +| | ... +| | ... | *Arguments:* +| | ... | _None_ +| | ... +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /tmp/sock-${VM_ID}-1 +| | ... | - /tmp/sock-${VM_ID}-2 +| | ... +| | ... | *Example:* +| | ... +| | ... | \| L2 xconnect with Vhost-User for '2' initialized in a 3-node \ +| | ... | circular topology \| +| | ... +| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${prev_index}= | Evaluate | ${number}-1 +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} +| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 +| | | ... | dut1-vhost-${number}-if2 +| | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} +| | | ... | ${dut1-vhost-${prev_index}-if2} +| | | L2 setup xconnect on DUT | ${dut1} | ${dut1_xconnect_if1} +| | | ... | ${dut1-vhost-${number}-if1} +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} +| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 +| | | ... | dut2-vhost-${number}-if2 +| | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} +| | | ... | ${dut2-vhost-${prev_index}-if2} +| | | L2 setup xconnect on DUT | ${dut2} | ${dut2_xconnect_if1} +| | | ... | ${dut2-vhost-${number}-if1} +| | | Run Keyword If | ${number}==${nr} | L2 setup xconnect on DUT +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${dut1_if2} +| | | Run Keyword If | ${number}==${nr} | L2 setup xconnect on DUT +| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${dut2_if2} + +| L2 xconnect with Vhost-User and VLAN initialized in a 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Cross +| | ... | connect each Vhost interface with one physical interface. +| | ... | Setup VLAN between DUTs. All interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| L2 xconnect with Vhost-User and VLAN initialized in a 3-node\ +| | ... | circular topology \| /tmp/sock1 \| /tmp/sock2 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} +| | ... +| | VPP interfaces in path are up in a 3-node circular topology +| | VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} +| | ... | ${sock1} | ${sock2} +| | L2 setup xconnect on DUT | ${dut1} | ${dut1_if1} | ${vhost_if1} +| | L2 setup xconnect on DUT | ${dut1} | ${subif_index_1} | ${vhost_if2} +| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} +| | ... | ${sock1} | ${sock2} +| | L2 setup xconnect on DUT | ${dut2} | ${subif_index_2} | ${vhost_if1} +| | L2 setup xconnect on DUT | ${dut2} | ${dut2_if2} | ${vhost_if2} +| | All Vpp Interfaces Ready Wait | ${nodes} + | L2 bridge domain initialized in a 3-node circular topology | | [Documentation] | | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD | | ... | that is created automatically with index 1. Learning is enabled. | | ... | Interfaces are brought up. -| | ... | +| | ... | | Vpp l2bd forwarding setup | ${dut1} | ${dut1_if1} | ${dut1_if2} | | Vpp l2bd forwarding setup | ${dut2} | ${dut2_if1} | ${dut2_if2} | | All Vpp Interfaces Ready Wait | ${nodes} @@ -643,25 +924,230 @@ | | ... | *Example:* | | ... | | ... | \| L2 bridge domains with Vhost-User initialized in a 3-node \ -| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| +| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| +| | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} +| | ... | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} -| | ... | ${sock1} -| | ... | ${sock2} +| | ... | ${sock1} | ${sock2} | | Interface is added to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} | | Interface is added to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} | | Interface is added to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2} | | Interface is added to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} -| | ... | ${sock1} -| | ... | ${sock2} +| | ... | ${sock1} | ${sock2} | | Interface is added to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id1} | | Interface is added to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} | | Interface is added to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} | | Interface is added to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} | | All Vpp Interfaces Ready Wait | ${nodes} -2-node Performance Suite Setup with DUT's NIC model +| L2 bridge domains with Vhost-User for '${nr}' VMs initialized in a 3-node circular topology +| | [Documentation] +| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all +| | ... | defined VPP nodes. Add each Vhost-User interface into L2 bridge +| | ... | domains with learning enabled with physical inteface or Vhost-User +| | ... | interface of another VM. +| | ... +| | ... | *Arguments:* +| | ... | _None_ +| | ... +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /tmp/sock-${VM_ID}-1 +| | ... | - /tmp/sock-${VM_ID}-2 +| | ... +| | ... | *Example:* +| | ... +| | ... | \| L2 bridge domains with Vhost-User for '2' VMs initialized in \ +| | ... | a 3-node circular topology \| +| | ... +| | ${bd_id2}= | Evaluate | ${nr}+1 +| | Interface is added to bridge domain | ${dut1} | ${dut1_if1} | ${1} +| | Interface is added to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2} +| | Interface is added to bridge domain | ${dut2} | ${dut2_if1} | ${1} +| | Interface is added to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} +| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 +| | | ... | dut1-vhost-${number}-if2 +| | | ${bd_id2}= | Evaluate | ${number}+1 +| | | Interface is added to bridge domain | ${dut1} +| | | ... | ${dut1-vhost-${number}-if1} | ${number} +| | | Interface is added to bridge domain | ${dut1} +| | | ... | ${dut1-vhost-${number}-if2} | ${bd_id2} +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} +| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 +| | | ... | dut2-vhost-${number}-if2 +| | | Interface is added to bridge domain | ${dut2} +| | | ... | ${dut2-vhost-${number}-if1} | ${number} +| | | Interface is added to bridge domain | ${dut2} +| | | ... | ${dut2-vhost-${number}-if2} | ${bd_id2} + +| L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology +| | [Documentation] +| | ... | Setup L2 bridge domain topology with VXLANoIPv4 by connecting +| | ... | physical and vxlan interfaces on each DUT. All interfaces are brought +| | ... | up. IPv4 addresses with prefix /24 are configured on interfaces +| | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as +| | ... | interfaces. +| | ... +| | VPP interfaces in path are up in a 3-node circular topology +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} +| | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 +| | ... | 172.16.0.1 | 172.16.0.2 +| | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 +| | ... | 172.16.0.2 | 172.16.0.1 +| | Vpp l2bd forwarding setup | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} +| | Vpp l2bd forwarding setup | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} +| | All Vpp Interfaces Ready Wait | ${nodes} + +| L2 bridge domains with Vhost-User and VXLANoIPv4 initialized in a 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each +| | ... | Vhost-User interface into L2 bridge domains with learning enabled +| | ... | with physical inteface. +| | ... | Setup VXLANoIPv4 between DUTs by connecting physical and vxlan +| | ... | interfaces on each DUT. All interfaces are brought up. +| | ... | IPv4 addresses with prefix /24 are configured on interfaces between +| | ... | DUTs. VXLAN sub-interfaces has same IPv4 address as interfaces. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id1 - Bridge domain ID. Type: integer +| | ... | - bd_id2 - Bridge domain ID. Type: integer +| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string +| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| L2 bridge domains with Vhost-User and VXLANoIPv4 initialized in a\ +| | ... | 3-node circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| +| | ... +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} +| | ... +| | VPP interfaces in path are up in a 3-node circular topology +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 +| | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 +| | ... | 172.16.0.1 | 172.16.0.2 +| | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 +| | ... | 172.16.0.2 | 172.16.0.1 +| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Interface is added to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} +| | Interface is added to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} +| | Interface is added to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} +| | Interface is added to bridge domain | ${dut1} | ${dut1s_vxlan} | ${bd_id2} +| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Interface is added to bridge domain | ${dut2} | ${dut2s_vxlan} | ${bd_id1} +| | Interface is added to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} +| | Interface is added to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} +| | Interface is added to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| | All Vpp Interfaces Ready Wait | ${nodes} + +| L2 bridge domains with Vhost-User initialized in a 2-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each +| | ... | Vhost-User interface into L2 bridge domains with learning enabled +| | ... | with physical inteface. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id1 - Bridge domain ID. Type: integer +| | ... | - bd_id2 - Bridge domain ID. Type: integer +| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string +| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| L2 bridge domains with Vhost-User initialized in a 2-node \ +| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| +| | ... +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} +| | ... +| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Interface is added to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} +| | Interface is added to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} +| | Interface is added to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2} +| | Interface is added to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} +| | All Vpp Interfaces Ready Wait | ${nodes} + +| L2 bridge domains with Vhost-User and VLAN initialized in a 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each +| | ... | Vhost-User interface into L2 bridge domains with learning enabled +| | ... | with physical inteface. +| | ... | Setup VLAN between DUTs. All interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id1 - Bridge domain ID. Type: integer +| | ... | - bd_id2 - Bridge domain ID. Type: integer +| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string +| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in a 3-node\ +| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| 10\ +| | ... | pop-1 \| +| | ... +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} +| | ... | ${tag_rewrite} +| | ... +| | VPP interfaces in path are up in a 3-node circular topology +| | VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Interface is added to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} +| | Interface is added to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} +| | Interface is added to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} +| | Interface is added to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} +| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Interface is added to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} +| | Interface is added to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} +| | Interface is added to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} +| | Interface is added to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| | All Vpp Interfaces Ready Wait | ${nodes} + +| 2-node Performance Suite Setup with DUT's NIC model +| | [Documentation] +| | ... | Suite preparation phase that setup default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} +| | ... +| | Show vpp version on all DUTs +| | 2-node circular Topology Variables Setup with DUT interface model +| | ... | ${nic_model} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type} + +| 2-node-switched Performance Suite Setup with DUT's NIC model | | [Documentation] | | ... | Suite preparation phase that setup default startup configuration of | | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global @@ -671,22 +1157,25 @@ | | ... | *Arguments:* | | ... | - topology_type - Topology type. Type: string | | ... | - nic_model - Interface model. Type: string +| | ... | - tg_if1_dest_mac - Interface 1 destination MAC address. Type: string +| | ... | - tg_if2_dest_mac - Interface 2 destination MAC address. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \ +| | ... | \| 22:22:33:44:55:66 \| 22:22:33:44:55:55 \| | | ... -| | ... | *Example:* +| | [Arguments] | ${topology_type} | ${nic_model} | ${tg_if1_dest_mac} +| | ... | ${tg_if2_dest_mac} | | ... -| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| -| | [Arguments] | ${topology_type} | ${nic_model} | | Show vpp version on all DUTs -| | Setup performance global Variables | | 2-node circular Topology Variables Setup with DUT interface model | | ... | ${nic_model} -| | Setup default startup configuration of VPP on all DUTs | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} -| | ... | ${dut1} | ${dut1_if2} -| | ... | ${topology_type} +| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type} +| | ... | ${tg_if1_dest_mac} | ${tg_if2_dest_mac} -3-node Performance Suite Setup with DUT's NIC model +| 3-node Performance Suite Setup with DUT's NIC model | | [Documentation] | | ... | Suite preparation phase that setup default startup configuration of | | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global @@ -700,16 +1189,14 @@ | | ... | *Example:* | | ... | | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| +| | ... | | [Arguments] | ${topology_type} | ${nic_model} +| | ... | | Show vpp version on all DUTs -| | Setup performance global Variables | | 3-node circular Topology Variables Setup with DUT interface model | | ... | ${nic_model} -| | Setup default startup configuration of VPP on all DUTs | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} -| | ... | ${dut2} | ${dut2_if2} -| | ... | ${topology_type} +| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type} | 3-node Performance Suite Teardown | | [Documentation] @@ -717,6 +1204,12 @@ | | ... | | Teardown traffic generator | ${tg} +| 2-node Performance Suite Teardown +| | [Documentation] +| | ... | Suite teardown phase with traffic generator teardown. +| | ... +| | Teardown traffic generator | ${tg} + | Find NDR using linear search and pps | | [Documentation] | | ... | Find throughput by using RFC2544 linear search with non drop rate. @@ -734,11 +1227,13 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Find NDR using linear search and pps \| 64 \| 5000000 \| \ -| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 +| | ... | \| Find NDR using linear search and pps \| 64 \| 5000000 \ +| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| +| | ... | | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} -| | ${duration}= | Set Variable | 10 +| | ... | ${topology_type} | ${min_rate} | ${max_rate} +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} | | Set Duration | ${duration} | | Set Search Rate Boundaries | ${max_rate} | ${min_rate} | | Set Search Linear Step | ${step_rate} @@ -750,19 +1245,18 @@ | | ${latency}= | Create List | ${tmp} | | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5) | | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p} -| | ... | ${framesize} | ${topology_type} +| | ... | ${framesize} | ${topology_type} | | ${tmp}= | Create List | 50%NDR | ${lat_50p} | | Append To List | ${latency} | ${tmp} | | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1) | | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p} -| | ... | ${framesize} | ${topology_type} +| | ... | ${framesize} | ${topology_type} | | ${tmp}= | Create List | 10%NDR | ${lat_10p} | | Append To List | ${latency} | ${tmp} | | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${latency} +| | ... | ${latency} | | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} -| | ... | fail_on_loss=${False} +| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} | Find PDR using linear search and pps | | [Documentation] @@ -782,11 +1276,13 @@ | | ... | *Example:* | | ... | | ... | \| Find PDR using linear search and pps \| 64 \| 5000000 \ -| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 0.5 \| percentage +| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 0.5 \| percentage \| +| | ... | | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} -| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' -| | ${duration}= | Set Variable | 10 +| | ... | ${topology_type} | ${min_rate} | ${max_rate} +| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} | | Set Duration | ${duration} | | Set Search Rate Boundaries | ${max_rate} | ${min_rate} | | Set Search Linear Step | ${step_rate} @@ -794,17 +1290,16 @@ | | Set Search Rate Type pps | | Set Loss Acceptance | ${loss_acceptance} | | Run Keyword If | '${loss_acceptance_type}' == 'percentage' -| | ... | Set Loss Acceptance Type Percentage +| | ... | Set Loss Acceptance Type Percentage | | Linear Search | ${start_rate} | ${topology_type} -| | ${rate_per_stream} | ${latency}= | Verify Search Result +| | ${rate_per_stream} | ${lat}= | Verify Search Result +| | ${tmp}= | Create List | 100%PDR | ${lat} +| | ${latency}= | Create List | ${tmp} | | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${loss_acceptance} | ${loss_acceptance_type} -| | ... | ${latency} +| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} | | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} -| | ... | ${loss_acceptance} -| | ... | ${loss_acceptance_type} -| | ... | fail_on_loss=${False} +| | ... | ${framesize} | ${topology_type} | ${loss_acceptance} +| | ... | ${loss_acceptance_type} | fail_on_loss=${False} | Find NDR using binary search and pps | | [Documentation] @@ -822,10 +1317,12 @@ | | ... | *Example:* | | ... | | ... | \| Find NDR using binary search and pps \| 64 \| 6000000 \ -| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 +| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \| +| | ... | | [Arguments] | ${framesize} | ${binary_min} | ${binary_max} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} -| | ${duration}= | Set Variable | 10 +| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} | | Set Duration | ${duration} | | Set Search Rate Boundaries | ${max_rate} | ${min_rate} | | Set Search Frame Size | ${framesize} @@ -837,19 +1334,18 @@ | | ${latency}= | Create List | ${tmp} | | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5) | | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p} -| | ... | ${framesize} | ${topology_type} +| | ... | ${framesize} | ${topology_type} | | ${tmp}= | Create List | 50%NDR | ${lat_50p} | | Append To List | ${latency} | ${tmp} | | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1) | | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p} -| | ... | ${framesize} | ${topology_type} +| | ... | ${framesize} | ${topology_type} | | ${tmp}= | Create List | 10%NDR | ${lat_10p} | | Append To List | ${latency} | ${tmp} | | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${latency} +| | ... | ${latency} | | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} -| | ... | fail_on_loss=${False} +| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} | Find PDR using binary search and pps | | [Documentation] @@ -871,29 +1367,30 @@ | | ... | | ... | \| Find PDR using binary search and pps \| 64 \| 6000000 \ | | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \| 0.5 \ -| | ... | \| percentage +| | ... | \| percentage \| +| | ... | | [Arguments] | ${framesize} | ${binary_min} | ${binary_max} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' -| | ${duration}= | Set Variable | 10 +| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} | | Set Duration | ${duration} | | Set Search Rate Boundaries | ${max_rate} | ${min_rate} | | Set Search Frame Size | ${framesize} | | Set Search Rate Type pps | | Set Loss Acceptance | ${loss_acceptance} | | Run Keyword If | '${loss_acceptance_type}' == 'percentage' -| | ... | Set Loss Acceptance Type Percentage +| | ... | Set Loss Acceptance Type Percentage | | Set Binary Convergence Threshold | ${threshold} | | Binary Search | ${binary_min} | ${binary_max} | ${topology_type} -| | ${rate_per_stream} | ${latency}= | Verify Search Result +| | ${rate_per_stream} | ${lat}= | Verify Search Result +| | ${tmp}= | Create List | 100%PDR | ${lat} +| | ${latency}= | Create List | ${tmp} | | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${loss_acceptance} | ${loss_acceptance_type} -| | ... | ${latency} +| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} | | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} -| | ... | ${loss_acceptance} -| | ... | ${loss_acceptance_type} -| | ... | fail_on_loss=${False} +| | ... | ${framesize} | ${topology_type} | ${loss_acceptance} +| | ... | ${loss_acceptance_type} | fail_on_loss=${False} | Find NDR using combined search and pps | | [Documentation] @@ -912,10 +1409,12 @@ | | ... | *Example:* | | ... | | ... | \| Find NDR using combined search and pps \| 64 \| 5000000 \ -| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 +| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \| +| | ... | | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} -| | ${duration}= | Set Variable | 10 +| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} | | Set Duration | ${duration} | | Set Search Rate Boundaries | ${max_rate} | ${min_rate} | | Set Search Linear Step | ${step_rate} @@ -928,19 +1427,19 @@ | | ${latency}= | Create List | ${tmp} | | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5) | | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p} -| | ... | ${framesize} | ${topology_type} +| | ... | ${framesize} | ${topology_type} | | ${tmp}= | Create List | 50%NDR | ${lat_50p} | | Append To List | ${latency} | ${tmp} | | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1) | | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p} -| | ... | ${framesize} | ${topology_type} +| | ... | ${framesize} | ${topology_type} | | ${tmp}= | Create List | 10%NDR | ${lat_10p} | | Append To List | ${latency} | ${tmp} | | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${latency} +| | ... | ${latency} | | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} -| | ... | fail_on_loss=${False} +| | ... | ${framesize} | ${topology_type} +| | ... | fail_on_loss=${False} | Find PDR using combined search and pps | | [Documentation] @@ -962,11 +1461,13 @@ | | ... | | ... | \| Find PDR using combined search and pps \| 64 \| 5000000 \ | | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \| 0.5 \ -| | ... | \| percentage +| | ... | \| percentage \| +| | ... | | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' -| | ${duration}= | Set Variable | 10 +| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} | | Set Duration | ${duration} | | Set Search Rate Boundaries | ${max_rate} | ${min_rate} | | Set Search Linear Step | ${step_rate} @@ -974,18 +1475,17 @@ | | Set Search Rate Type pps | | Set Loss Acceptance | ${loss_acceptance} | | Run Keyword If | '${loss_acceptance_type}' == 'percentage' -| | ... | Set Loss Acceptance Type Percentage +| | ... | Set Loss Acceptance Type Percentage | | Set Binary Convergence Threshold | ${threshold} | | Combined Search | ${start_rate} | ${topology_type} -| | ${rate_per_stream} | ${latency}= | Verify Search Result +| | ${rate_per_stream} | ${lat}= | Verify Search Result +| | ${tmp}= | Create List | 100%PDR | ${lat} +| | ${latency}= | Create List | ${tmp} | | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${loss_acceptance} | ${loss_acceptance_type} -| | ... | ${latency} +| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} | | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} -| | ... | ${loss_acceptance} -| | ... | ${loss_acceptance_type} -| | ... | fail_on_loss=${False} +| | ... | ${framesize} | ${topology_type} | ${loss_acceptance} +| | ... | ${loss_acceptance_type} | fail_on_loss=${False} | Display result of NDR search | | [Documentation] @@ -1006,16 +1506,16 @@ | | ... | | ... | \| Display result of NDR search \| 4400000 \| 64 \| 2 \ | | ... | \| [100%NDR, [10/10/10, 1/2/3]] \| -| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams} -| | ... | ${latency} +| | ... +| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams} | ${latency} +| | ... | | ${framesize}= | Get Frame Size | ${framesize} | | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams} | | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9) | | Set Test Message | FINAL_RATE: ${rate_total} pps -| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) -| | ... | append=yes +| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes | | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged) -| | ... | append=yes +| | ... | append=yes | | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes | | :FOR | ${lat} | IN | @{latency} | | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes @@ -1040,22 +1540,24 @@ | | ... | *Example:* | | ... | | ... | \| Display result of PDR search \| 4400000 \| 64 \| 2 \| 0.5 \ -| | ... | \| percentage \| (0, 10/10/10) \| +| | ... | \| percentage \| [100%NDR, [10/10/10, 1/2/3]] \| +| | ... | | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams} -| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} +| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} +| | ... | | ${framesize}= | Get Frame Size | ${framesize} | | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams} | | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9) | | Set Test Message | FINAL_RATE: ${rate_total} pps -| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) -| | ... | append=yes +| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes | | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged) -| | ... | append=yes -| | :FOR | ${idx} | ${lat} | IN ENUMERATE | @{latency} -| | | Set Test Message | ${\n}LATENCY_STREAM_${idx}: ${lat} usec (min/avg/max) -| | ... | append=yes -| | Set Test Message | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type} -| | ... | append=yes +| | ... | append=yes +| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes +| | :FOR | ${lat} | IN | @{latency} +| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes +| | Set Test Message +| | ... | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type} +| | ... | append=yes | Measure latency pps | | [Documentation] @@ -1069,13 +1571,16 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Measure latency \| 10 \| 4.0 \| 64 \| 3-node-IPv4 +| | ... | \| Measure latency \| 10 \| 4.0 \| 64 \| 3-node-IPv4 \| +| | ... | | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} +| | ... | | Return From Keyword If | ${rate} <= 10000 | ${-1} -| | Clear all counters on all DUTs +| | ${ret}= | For DPDK Performance Test +| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs | | Send traffic on tg | ${duration} | ${rate}pps | ${framesize} -| | ... | ${topology_type} | warmup_time=0 -| | Show statistics on all DUTs +| | ... | ${topology_type} | warmup_time=0 +| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs | | Run keyword and return | Get latency | Traffic should pass with no loss @@ -1088,19 +1593,24 @@ | | ... | - rate - Rate for sending packets. Type: string | | ... | - framesize - L2 Frame Size [B]. Type: integer | | ... | - topology_type - Topology type. Type: string +| | ... | - fail_on_loss - If True, the keyword fails if loss occurred. +| | ... | Type: boolean | | ... | | ... | *Example:* | | ... | | ... | \| Traffic should pass with no loss \| 10 \| 4.0mpps \| 64 \ -| | ... | \| 3-node-IPv4 +| | ... | \| 3-node-IPv4 \| +| | ... | | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} -| | ... | ${fail_on_loss}=${True} +| | ... | ${fail_on_loss}=${True} +| | ... | | Clear and show runtime counters with running traffic | ${duration} -| | ... | ${rate} | ${framesize} | ${topology_type} -| | Clear all counters on all DUTs +| | ... | ${rate} | ${framesize} | ${topology_type} +| | ${ret}= | For DPDK Performance Test +| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs | | Send traffic on tg | ${duration} | ${rate} | ${framesize} -| | ... | ${topology_type} | warmup_time=0 -| | Show statistics on all DUTs +| | ... | ${topology_type} | warmup_time=0 +| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs | | Run Keyword If | ${fail_on_loss} | No traffic loss occurred | Traffic should pass with partial loss @@ -1119,18 +1629,21 @@ | | ... | *Example:* | | ... | | ... | \| Traffic should pass with partial loss \| 10 \| 4.0mpps \| 64 \ -| | ... | \| 3-node-IPv4 \| 0.5 \| percentage +| | ... | \| 3-node-IPv4 \| 0.5 \| percentage \| +| | ... | | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} -| | ... | ${loss_acceptance} | ${loss_acceptance_type} -| | ... | ${fail_on_loss}=${True} +| | ... | ${loss_acceptance} | ${loss_acceptance_type} +| | ... | ${fail_on_loss}=${True} +| | ... | | Clear and show runtime counters with running traffic | ${duration} -| | ... | ${rate} | ${framesize} | ${topology_type} -| | Clear all counters on all DUTs +| | ... | ${rate} | ${framesize} | ${topology_type} +| | ${ret}= | For DPDK Performance Test +| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs | | Send traffic on tg | ${duration} | ${rate} | ${framesize} -| | ... | ${topology_type} | warmup_time=0 -| | Show statistics on all DUTs +| | ... | ${topology_type} | warmup_time=0 +| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs | | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted -| | ... | ${loss_acceptance} | ${loss_acceptance_type} +| | ... | ${loss_acceptance} | ${loss_acceptance_type} | Clear and show runtime counters with running traffic | | [Documentation] @@ -1147,14 +1660,16 @@ | | ... | *Example:* | | ... | | ... | \| Traffic should pass with partial loss \| 10 \| 4.0mpps \| 64 \ -| | ... | \| 3-node-IPv4 \| 0.5 \| percentage +| | ... | \| 3-node-IPv4 \| 0.5 \| percentage \| +| | ... | | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} -| | Send traffic on tg | -1 | ${rate} | ${framesize} -| | ... | ${topology_type} | warmup_time=0 | async_call=${True} -| | ... | latency=${False} -| | Clear runtime counters on all DUTs +| | ... +| | Send traffic on tg | -1 | ${rate} | ${framesize} | ${topology_type} +| | ... | warmup_time=0 | async_call=${True} | latency=${False} +| | ${ret}= | For DPDK Performance Test +| | Run Keyword If | ${ret}==${FALSE} | Clear runtime counters on all DUTs | | Sleep | ${duration} -| | Show runtime counters on all DUTs +| | Run Keyword If | ${ret}==${FALSE} | Show runtime counters on all DUTs | | Stop traffic on tg | Add PCI devices to DUTs from 3-node single link topology @@ -1165,51 +1680,152 @@ | | Add PCI device | ${dut1} | ${dut1_if1_pci} | ${dut1_if2_pci} | | Add PCI device | ${dut2} | ${dut2_if1_pci} | ${dut2_if2_pci} +| Add PCI devices to DUTs from 2-node single link topology +| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} +| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} +| | Add PCI device | ${dut1} | ${dut1_if1_pci} | ${dut1_if2_pci} + | Guest VM with dpdk-testpmd connected via vhost-user is setup | | [Documentation] | | ... | Start QEMU guest with two vhost-user interfaces and interconnecting -| | ... | DPDK testpmd. Qemu Guest is using 5 cores pinned to physical cores -| | ... | 5-9, and 2048M. Testpmd is using 5 cores (1 main core and 4 cores -| | ... | dedicated to io) mem-channel=4, txq/rxq=256, burst=64, -| | ... | disable-hw-vlan, disable-rss, driver usr/lib/librte_pmd_virtio.so -| | ... | and fwd mode is io. +| | ... | DPDK testpmd. Qemu Guest uses by default 5 cores and 2048M. Testpmd +| | ... | uses 5 cores (1 main core and 4 cores dedicated to io) mem-channel=4, +| | ... | txq/rxq=256, burst=64, disable-hw-vlan, disable-rss, +| | ... | driver usr/lib/librte_pmd_virtio.so and fwd mode is io. | | ... | | ... | *Arguments:* | | ... | - dut_node - DUT node to start guest VM on. Type: dictionary | | ... | - sock1 - Socket path for first Vhost-User interface. Type: string | | ... | - sock2 - Socket path for second Vhost-User interface. Type: string | | ... | - vm_name - QemuUtil instance name. Type: string +| | ... | - skip - Number of cpus which will be skipped. Type: integer +| | ... | - count - Number of cpus which will be allocated for qemu. +| | ... | Type: integer +| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT node. +| | ... | Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Guest VM with dpdk-testpmd connected via vhost-user is setup \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \| -| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} +| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \| ${6} \ +| | ... | \| ${5} \| +| | ... | \| Guest VM with dpdk-testpmd connected via vhost-user is setup \ +| | ... | \| ${nodes['DUT1']} \| /tmp/sock-2-1 \| /tmp/sock-2-2 \| DUT1_VM2 \ +| | ... | \| qemu_id=${2} \| +| | ... +| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} +| | ... | ${count}=${5} | ${qemu_id}=${1} +| | ... +| | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id} +| | ... | WITH NAME | ${vm_name} +| | ${serial_port}= | Evaluate | ${qemu_id} + ${4555} +| | Run keyword | ${vm_name}.Qemu Set Serial Port | ${serial_port} +| | ${ssh_fwd_port}= | Evaluate | ${qemu_id} + ${10021} +| | Run keyword | ${vm_name}.Qemu Set Ssh Fwd Port | ${ssh_fwd_port} +| | ${dut_numa}= | Get interfaces numa node | ${dut_node} +| | ... | ${dut1_if1} | ${dut1_if2} +| | ${skip_cnt}= | Evaluate | ${skip} + (${qemu_id} - 1) * ${count} +| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} +| | ... | skip_cnt=${skip_cnt} | cpu_cnt=${count} | smt_used=${False} +| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} +| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node} | apply_patch=${True} +| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} +| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} +| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 +| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 +| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} +| | ${vm}= | Run keyword | ${vm_name}.Qemu Start +| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} +| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | eal_mem_channels=4 +| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${True} +| | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} +| | Return From Keyword | ${vm} + +| '${nr}' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | [Documentation] +| | ... | Start QEMU guests with two vhost-user interfaces and interconnecting +| | ... | DPDK testpmd for defined number of VMs on all defined VPP nodes. +| | ... +| | ... | *Arguments:* +| | ... | _None_ +| | ... +| | ... | _NOTE:_ This KW expects following test case variables to be set: +| | ... | - ${system_cpus} - Number of CPUs allocated for OS itself. +| | ... | - ${vpp_cpus} - Number of CPUs allocated for VPP. +| | ... | - ${vm_cpus} - Number of CPUs to be allocated per QEMU instance. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| '2' Guest VM with dpdk-testpmd connected via vhost-user is setup \ +| | ... | in a 3-node circular topology \| +| | ... +| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${skip_cpus}= | Evaluate | ${vpp_cpus}+${system_cpus} +| | | ${vm1}= | Guest VM with dpdk-testpmd connected via vhost-user is setup +| | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} +| | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} +| | | ${vm2}= | Guest VM with dpdk-testpmd connected via vhost-user is setup +| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} +| | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} + +| Guest VM with dpdk-testpmd using SMT connected via vhost-user is setup +| | [Documentation] +| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting +| | ... | DPDK testpmd. Qemu Guest uses by default 5 cores and 2048M. Testpmd +| | ... | uses 5 cores (1 main core and 4 cores dedicated to io) mem-channel=4, +| | ... | txq/rxq=256, burst=64, disable-hw-vlan, disable-rss, +| | ... | driver usr/lib/librte_pmd_virtio.so and fwd mode is io. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary +| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - vm_name - QemuUtil instance name. Type: string +| | ... | - skip - number of cpus which will be skipped. Type: int +| | ... | - count - number of cpus which will be allocated for qemu. Type: int +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Guest VM with dpdk-testpmd using SMT connected via vhost-user is \ +| | ... | setup \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ +| | ... | \| ${6} \| ${5} \| +| | ... +| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} +| | ... | ${count}=${5} +| | ... | | Import Library | resources.libraries.python.QemuUtils -| | ... | WITH NAME | ${vm_name} +| | ... | WITH NAME | ${vm_name} +| | ${dut_numa}= | Get interfaces numa node | ${dut_node} +| | ... | ${dut1_if1} | ${dut1_if2} +| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node} | apply_patch=${True} +| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | Run keyword | ${vm_name}.Qemu Set Smp | 5 | 5 | 1 | 1 +| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 -| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image} +| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} | | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | 5 | 6 | 7 | 8 | 9 -| | Run keyword | ${vm_name}.Qemu Set Scheduler Policy -| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f -| | ... | eal_mem_channels=4 -| | ... | pmd_fwd_mode=io -| | ... | pmd_disable_hw_vlan=${True} +| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} +| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | eal_mem_channels=4 +| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${True} +| | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} | | Return From Keyword | ${vm} | Guest VM with dpdk-testpmd-mac connected via vhost-user is setup | | [Documentation] | | ... | Start QEMU guest with two vhost-user interfaces and interconnecting -| | ... | DPDK testpmd. Qemu Guest is using 5 cores pinned to physical cores -| | ... | 5-9 and 2048M. Testpmd is using 5 cores (1 main core and 4 cores -| | ... | dedicated to io) mem-channel=4, txq/rxq=256, burst=64, -| | ... | disable-hw-vlan, disable-rss, driver usr/lib/librte_pmd_virtio.so -| | ... | and fwd mode is mac rewrite. +| | ... | DPDK testpmd. Qemu Guest uses by default 5 cores and 2048M. Testpmd +| | ... | uses 5 cores (1 main core and 4 cores dedicated to io) mem-channel=4, +| | ... | txq/rxq=256, burst=64, disable-hw-vlan, disable-rss, +| | ... | driver usr/lib/librte_pmd_virtio.so and fwd mode is mac rewrite. | | ... | | ... | *Arguments:* | | ... | - dut_node - DUT node to start guest VM on. Type: dictionary @@ -1218,61 +1834,223 @@ | | ... | - vm_name - QemuUtil instance name. Type: string | | ... | - eth0_mac - MAC address of first Vhost interface. Type: string | | ... | - eth1_mac - MAC address of second Vhost interface. Type: string +| | ... | - skip - number of cpus which will be skipped. Type: integer +| | ... | - count - number of cpus which will be allocated for qemu. +| | ... | Type: integer +| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT node. +| | ... | Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Guest VM with dpdk-testpmd for Vhost L2BD forwarding is setup \ | | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ -| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| +| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| ${6} \| ${5} \| +| | ... | \| Guest VM with dpdk-testpmd for Vhost L2BD forwarding is setup \ +| | ... | \| ${nodes['DUT1']} \| /tmp/sock-2-1 \| /tmp/sock-2-2 \| DUT1_VM2 \ +| | ... | \| 00:00:00:00:02:01 \| 00:00:00:00:02:02 \| ${6} \| ${5} \ +| | ... | \| qemu_id=${2} \| +| | ... +| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} +| | ... | ${eth0_mac} | ${eth1_mac} | ${skip}=${6} | ${count}=${5} +| | ... | ${qemu_id}=${1} +| | ... +| | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id} +| | ... | WITH NAME | ${vm_name} +| | ${serial_port}= | Evaluate | ${qemu_id} + ${4555} +| | Run keyword | ${vm_name}.Qemu Set Serial Port | ${serial_port} +| | ${ssh_fwd_port}= | Evaluate | ${qemu_id} + ${10021} +| | Run keyword | ${vm_name}.Qemu Set Ssh Fwd Port | ${ssh_fwd_port} +| | ${dut_numa}= | Get interfaces numa node | ${dut_node} +| | ... | ${dut1_if1} | ${dut1_if2} +| | ${skip_cnt}= | Evaluate | ${skip} + (${qemu_id} - 1) * ${count} +| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} +| | ... | skip_cnt=${skip_cnt} | cpu_cnt=${count} | smt_used=${False} +| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} +| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node} | apply_patch=${True} +| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} +| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} +| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 +| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 +| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} +| | ${vm}= | Run keyword | ${vm_name}.Qemu Start +| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} +| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f +| | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} +| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${True} +| | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} +| | Return From Keyword | ${vm} + +| '${nr}' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology +| | [Documentation] +| | ... | Start QEMU guests with two vhost-user interfaces and interconnecting +| | ... | DPDK testpmd with fwd mode set to mac rewrite for defined number of +| | ... | VMs on all defined VPP nodes. +| | ... +| | ... | *Arguments:* +| | ... | _None_ +| | ... +| | ... | _NOTE:_ This KW expects following test case variables to be set: +| | ... | - ${system_cpus} - Number of CPUs allocated for OS itself. +| | ... | - ${vpp_cpus} - Number of CPUs allocated for VPP. +| | ... | - ${vm_cpus} - Number of CPUs to be allocated per QEMU instance. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is \ +| | ... | setup in a 3-node circular topology \| +| | ... +| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${skip_cpus}= | Evaluate | ${vpp_cpus}+${system_cpus} +| | | ${vm1}= | Guest VM with dpdk-testpmd-mac connected via vhost-user is setup +| | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} +| | | ... | ${dut1-vhost-${number}-if1_mac} +| | | ... | ${dut1-vhost-${number}-if2_mac} | skip=${skip_cpus} +| | | ... | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} +| | | ${vm2}= | Guest VM with dpdk-testpmd-mac connected via vhost-user is setup +| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} +| | | ... | ${dut2-vhost-${number}-if1_mac} +| | | ... | ${dut2-vhost-${number}-if2_mac} | skip=${skip_cpus} +| | | ... | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} + +| Guest VM with dpdk-testpmd-mac using SMT connected via vhost-user is setup +| | [Documentation] +| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting +| | ... | DPDK testpmd. Qemu Guest uses by default 5 cores and 2048M. Testpmd +| | ... | uses 5 cores (1 main core and 4 cores dedicated to io) mem-channel=4, +| | ... | txq/rxq=256, burst=64, disable-hw-vlan, disable-rss, +| | ... | driver usr/lib/librte_pmd_virtio.so and fwd mode is mac rewrite. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary +| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - vm_name - QemuUtil instance name. Type: string +| | ... | - eth0_mac - MAC address of first Vhost interface. Type: string +| | ... | - eth1_mac - MAC address of second Vhost interface. Type: string +| | ... | - skip - number of cpus which will be skipped. Type: int +| | ... | - count - number of cpus which will be allocated for qemu. Type: int +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Guest VM with dpdk-testpmd-mac using SMT connected via vhost-user \ +| | ... | is setup \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ +| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| ${6} \| ${5} \| +| | ... | | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} -| | ... | ${eth0_mac} | ${eth1_mac} +| | ... | ${eth0_mac} | ${eth1_mac} | ${skip}=${6} | ${count}=${5} +| | ... | | Import Library | resources.libraries.python.QemuUtils -| | ... | WITH NAME | ${vm_name} +| | ... | WITH NAME | ${vm_name} +| | ${dut_numa}= | Get interfaces numa node | ${dut_node} +| | ... | ${dut1_if1} | ${dut1_if2} +| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node} | apply_patch=${True} +| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | Run keyword | ${vm_name}.Qemu Set Smp | 5 | 5 | 1 | 1 +| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 -| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image} +| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} | | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | 5 | 6 | 7 | 8 | 9 -| | Run keyword | ${vm_name}.Qemu Set Scheduler Policy +| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} | | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f -| | ... | eal_mem_channels=4 -| | ... | pmd_fwd_mode=mac -| | ... | pmd_eth_peer_0=0,${eth0_mac} -| | ... | pmd_eth_peer_1=1,${eth1_mac} -| | ... | pmd_disable_hw_vlan=${True} +| | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} +| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${True} +| | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} | | Return From Keyword | ${vm} | Guest VM with Linux Bridge connected via vhost-user is setup | | [Documentation] | | ... | Start QEMU guest with two vhost-user interfaces and interconnecting -| | ... | linux bridge. Qemu Guest is using 3 cores pinned to physical cores 5, -| | ... | 6, 7 and 2048M. +| | ... | linux bridge. Qemu Guest uses 2048M. | | ... | | ... | *Arguments:* | | ... | - dut_node - DUT node to start guest VM on. Type: dictionary | | ... | - sock1 - Socket path for first Vhost-User interface. Type: string | | ... | - sock2 - Socket path for second Vhost-User interface. Type: string | | ... | - vm_name - QemuUtil instance name. Type: string +| | ... | - skip - number of cpus which will be skipped. Type: int +| | ... | - count - number of cpus which will be allocated for qemu. Type: int | | ... | | ... | *Example:* | | ... | | ... | \| Guest VM with Linux Bridge connected via vhost-user is setup \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \| -| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} +| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \| ${6} \ +| | ... | \| ${5} \| +| | ... +| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} +| | ... | ${count}=${5} +| | ... +| | Import Library | resources.libraries.python.QemuUtils +| | ... | WITH NAME | ${vm_name} +| | ${dut_numa}= | Get interfaces numa node | ${dut_node} +| | ... | ${dut1_if1} | ${dut1_if2} +| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${False} +| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} +| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node} | apply_patch=${True} +| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} +| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} +| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 +| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 +| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} +| | ${vm}= | Run keyword | ${vm_name}.Qemu Start +| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} +| | ${br}= | Set Variable | br0 +| | ${vhost1}= | Get Vhost User If Name By Sock | ${vm} | ${sock1} +| | ${vhost2}= | Get Vhost User If Name By Sock | ${vm} | ${sock2} +| | Linux Add Bridge | ${vm} | ${br} | ${vhost1} | ${vhost2} +| | Set Interface State | ${vm} | ${vhost1} | up | if_type=name +| | Set Interface State | ${vm} | ${vhost2} | up | if_type=name +| | Set Interface State | ${vm} | ${br} | up | if_type=name +| | Return From Keyword | ${vm} + +| Guest VM with Linux Bridge using SMT connected via vhost-user is setup +| | [Documentation] +| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting +| | ... | linux bridge. Qemu Guest uses 2048M. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary +| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - vm_name - QemuUtil instance name. Type: string +| | ... | - skip - number of cpus which will be skipped. Type: int +| | ... | - count - number of cpus which will be allocated for qemu. Type: int +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Guest VM with Linux Bridge using SMT connected via vhost-user is \ +| | ... | setup \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ +| | ... | \| ${6}\| ${5} \| +| | ... +| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} +| | ... | ${count}=${5} +| | ... | | Import Library | resources.libraries.python.QemuUtils -| | ... | WITH NAME | ${vm_name} +| | ... | WITH NAME | ${vm_name} +| | ${dut_numa}= | Get interfaces numa node | ${dut_node} +| | ... | ${dut1_if1} | ${dut1_if2} +| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | Run Keyword | ${vm_name}.Build QEMU | ${dut_node} | apply_patch=${True} +| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | Run keyword | ${vm_name}.Qemu Set Smp | 3 | 3 | 1 | 1 +| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 -| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image} +| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} | | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | 5 | 6 | 7 -| | Run keyword | ${vm_name}.Qemu Set Scheduler Policy +| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} | | ${br}= | Set Variable | br0 | | ${vhost1}= | Get Vhost User If Name By Sock | ${vm} | ${sock1} | | ${vhost2}= | Get Vhost User If Name By Sock | ${vm} | ${sock2} @@ -1287,7 +2065,7 @@ | | ... | Stop all qemu processes with dpdk-testpmd running on ${dut_node}. | | ... | Argument is dictionary of all qemu nodes running with its names. | | ... | Dpdk-testpmd is stopped gracefully with printing stats. -| | ... | +| | ... | | ... | *Arguments:* | | ... | - dut_node - Node where to clean qemu. Type: dictionary | | ... | - dut_vm_refs - VM references on node. Type: dictionary @@ -1298,18 +2076,21 @@ | | ... | \| ${dut_vm_refs} \| | | ... | | [Arguments] | ${dut_node} | ${dut_vm_refs} +| | ${vms_number}= | Get Length | ${dut_vm_refs} +| | ${index}= | Set Variable | ${0} | | :FOR | ${vm_name} | IN | @{dut_vm_refs} | | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name} +| | | ${index}= | Evaluate | ${index} + 1 | | | Dpdk Testpmd Stop | ${vm} | | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | | Run Keyword | ${vm_name}.Qemu Kill | | | Run Keyword | ${vm_name}.Qemu Clear Socks +| | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All | Guest VM Teardown | | [Documentation] | | ... | Stop all qemu processes running on ${dut_node}. | | ... | Argument is dictionary of all qemu nodes running with its names. -| | ... | +| | ... | | ... | *Arguments:* | | ... | - dut_node - Node where to clean qemu. Type: dictionary | | ... | - dut_vm_refs - VM references on node. Type: dictionary @@ -1320,15 +2101,18 @@ | | ... | \| ${dut_vm_refs} \| | | ... | | [Arguments] | ${dut_node} | ${dut_vm_refs} +| | ${vms_number}= | Get Length | ${dut_vm_refs} +| | ${index}= | Set Variable | ${0} | | :FOR | ${vm_name} | IN | @{dut_vm_refs} | | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name} +| | | ${index}= | Evaluate | ${index} + 1 | | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | | Run Keyword | ${vm_name}.Qemu Kill | | | Run Keyword | ${vm_name}.Qemu Clear Socks +| | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All | Lisp IPv4 forwarding initialized in a 3-node circular topology | | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ -| | ... | Don`t set route. +| | ... | Don`t set route. | | ... | | ... | *Arguments:* | | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string @@ -1346,8 +2130,8 @@ | | ... | \| ${dut2_dut1_address} \| ${dut2_tg_address} \| ${duts_prefix} \| | | ... | | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} -| | ... | ${dut2_dut1_address} | ${dut2_tg_address} -| | ... | ${duts_prefix} +| | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${duts_prefix} +| | ... | | Set Interface State | ${dut1} | ${dut1_if1} | up | | Set Interface State | ${dut1} | ${dut1_if2} | up | | Set Interface State | ${dut2} | ${dut2_if1} | up @@ -1356,19 +2140,59 @@ | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} -| | dut1_v4.set_arp | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac} -| | dut2_v4.set_arp | ${dut2_if1} | ${dut1_dut2_address} | ${dut1_if2_mac} -| | dut2_v4.set_arp | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} -| | dut1_v4.set_ip | ${dut1_if1} | ${dut1_tg_address} | ${duts_prefix} -| | dut1_v4.set_ip | ${dut1_if2} | ${dut1_dut2_address} | ${duts_prefix} -| | dut2_v4.set_ip | ${dut2_if1} | ${dut2_dut1_address} | ${duts_prefix} -| | dut2_v4.set_ip | ${dut2_if2} | ${dut2_tg_address} | ${duts_prefix} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} +| | ... | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} +| | ... | ${dut1_if2_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if1} +| | ... | ${dut1_tg_address} | ${duts_prefix} +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} +| | ... | ${dut1_dut2_address} | ${duts_prefix} +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} +| | ... | ${dut2_dut1_address} | ${duts_prefix} +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if2} +| | ... | ${dut2_tg_address} | ${duts_prefix} | | All Vpp Interfaces Ready Wait | ${nodes} +| Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | [Documentation] | Setup Lisp GPE IPv4 forwarding over IPsec. +| | ... +| | ... | *Arguments:* +| | ... | -${encr_alg} - Encryption algorithm. Type: string +| | ... | -${auth_alg} - Authentication algorithm. Type: string +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... | \| Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology\ +| | ... | \| ${encr_alg} \| ${auth_alg} +| | ... +| | [Arguments] | ${encr_alg} | ${auth_alg} +| | ... +| | IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | Lisp IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | Set up LISP GPE topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1} | ${dut1_if2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2} | ${dut2_if1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} + | Lisp IPv6 forwarding initialized in a 3-node circular topology | | [Documentation] | Custom setup of IPv6 topology on all DUT nodes \ -| | ... | Don`t set route. +| | ... | Don`t set route. | | ... | | ... | *Arguments:* | | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string @@ -1386,56 +2210,55 @@ | | ... | \| ${dut2_dut1_address} \| ${dut2_tg_address} \| ${duts_prefix} \| | | ... | | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} -| | ... | ${dut2_dut1_address} | ${dut2_tg_address} -| | ... | ${prefix} +| | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${prefix} +| | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_tg_address} -| | ... | ${prefix} +| | ... | ${prefix} | | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_dut2_address} -| | ... | ${prefix} +| | ... | ${prefix} | | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_dut1_address} -| | ... | ${prefix} +| | ... | ${prefix} | | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_tg_address} -| | ... | ${prefix} +| | ... | ${prefix} | | Vpp nodes ra suppress link layer | ${nodes} -| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 -| | ... | ${tg1_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 -| | ... | ${tg1_if2_mac} +| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} | | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} -| | ... | ${dut2_if1_mac} +| | ... | ${dut2_if1_mac} | | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} -| | ... | ${dut1_if2_mac} +| | ... | ${dut1_if2_mac} | Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology | | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \ -| | ... | Don`t set route. +| | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | -${dut1_dut2_ip6_address} - IPv6 address from DUT1 to DUT2. -| | ... | Type: string -| | ... | -${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string -| | ... | -${dut2_dut1_ip6_address} - IPv6 address from DUT2 to DUT1. -| | ... | Type: string -| | ... | -${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string -| | ... | -${prefix4} - IPv4 prefix. Type: int -| | ... | -${prefix6} - IPv6 prefix. Type: int +| | ... | - ${dut1_dut2_ip6_address} - IPv6 address from DUT1 to DUT2. +| | ... | Type: string +| | ... | - ${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string +| | ... | - ${dut2_dut1_ip6_address} - IPv6 address from DUT2 to DUT1. +| | ... | Type: string +| | ... | - ${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string +| | ... | - ${prefix4} - IPv4 prefix. Type: int +| | ... | - ${prefix6} - IPv6 prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned | | ... | | ... | *Example:* -| | ... | \| Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology \ -| | ... | \| ${dut1_dut2_ip6_address} \| ${dut1_tg_ip4_address} \ +| | ... | \| Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular \ +| | ... | topology \| ${dut1_dut2_ip6_address} \| ${dut1_tg_ip4_address} \ | | ... | \| ${dut2_dut1_ip6_address} \| ${dut2_tg_ip4_address} \ | | ... | \| ${prefix4} \| ${prefix6} \| | | ... | | [Arguments] | ${dut1_dut2_ip6_address} | ${dut1_tg_ip4_address} -| | ... | ${dut2_dut1_ip6_address} | ${dut2_tg_ip4_address} -| | ... | ${prefix4} | ${prefix6} +| | ... | ${dut2_dut1_ip6_address} | ${dut2_tg_ip4_address} +| | ... | ${prefix4} | ${prefix6} +| | ... | | Set Interface State | ${dut1} | ${dut1_if1} | up | | Set Interface State | ${dut1} | ${dut1_if2} | up | | Set Interface State | ${dut2} | ${dut2_if1} | up @@ -1444,46 +2267,49 @@ | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | dut1_v4.set_ip | ${dut1_if1} | ${dut1_tg_ip4_address} | ${prefix4} +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if1} +| | ... | ${dut1_tg_ip4_address} | ${prefix4} | | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_dut2_ip6_address} -| | ... | ${prefix6} +| | ... | ${prefix6} | | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip6_address} -| | ... | ${prefix6} -| | dut2_v4.set_ip | ${dut2_if2} | ${dut2_tg_ip4_address} | ${prefix4} +| | ... | ${prefix6} +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if2} +| | ... | ${dut2_tg_ip4_address} | ${prefix4} | | Vpp nodes ra suppress link layer | ${nodes} -| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} -| | dut2_v4.set_arp | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} | | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip6_address} -| | ... | ${dut2_if1_mac} +| | ... | ${dut2_if1_mac} | | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip6_address} -| | ... | ${dut1_if2_mac} +| | ... | ${dut1_if2_mac} | Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology | | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \ -| | ... | Don`t set route. +| | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | -${dut1_dut2_ip4_address} - IPv4 address from DUT1 to DUT2. -| | ... | Type: string -| | ... | -${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string -| | ... | -${dut2_dut1_ip4_address} - IPv4 address from DUT2 to DUT1. -| | ... | Type: string -| | ... | -${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string -| | ... | -${prefix4} - IPv4 prefix. Type: int -| | ... | -${prefix6} - IPv6 prefix. Type: int +| | ... | - ${dut1_dut2_ip4_address} - IPv4 address from DUT1 to DUT2. +| | ... | Type: string +| | ... | - ${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string +| | ... | - ${dut2_dut1_ip4_address} - IPv4 address from DUT2 to DUT1. +| | ... | Type: string +| | ... | - ${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string +| | ... | - ${prefix4} - IPv4 prefix. Type: int +| | ... | - ${prefix6} - IPv6 prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned | | ... | | ... | *Example:* -| | ... | \| Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology \ -| | ... | \| ${dut1_dut2_ip4_address} \| ${dut1_tg_ip6_address} \ +| | ... | \| Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular \ +| | ... | topology \| ${dut1_dut2_ip4_address} \| ${dut1_tg_ip6_address} \ | | ... | \| ${dut2_dut1_ip4_address} \| ${dut2_tg_ip6_address} \ | | ... | \| ${prefix6} \| ${prefix4} \| | | ... | | [Arguments] | ${dut1_dut2_ip4_address} | ${dut1_tg_ip6_address} -| | ... | ${dut2_dut1_ip4_address} | ${dut2_tg_ip6_address} -| | ... | ${prefix6} | ${prefix4} +| | ... | ${dut2_dut1_ip4_address} | ${dut2_tg_ip6_address} +| | ... | ${prefix6} | ${prefix4} +| | ... | | Set Interface State | ${dut1} | ${dut1_if1} | up | | Set Interface State | ${dut1} | ${dut1_if2} | up | | Set Interface State | ${dut2} | ${dut2_if1} | up @@ -1493,14 +2319,196 @@ | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_tg_ip6_address} -| | ... | ${prefix6} -| | dut1_v4.set_ip | ${dut1_if2} | ${dut1_dut2_ip4_address} | ${prefix4} -| | dut2_v4.set_ip | ${dut2_if1} | ${dut2_dut1_ip4_address} | ${prefix4} +| | ... | ${prefix6} +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} +| | ... | ${dut1_dut2_ip4_address} | ${prefix4} +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} +| | ... | ${dut2_dut1_ip4_address} | ${prefix4} | | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_tg_ip6_address} -| | ... | ${prefix6} +| | ... | ${prefix6} | | Vpp nodes ra suppress link layer | ${nodes} | | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} | | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} -| | dut1_v4.set_arp | ${dut1_if2} | ${dut2_dut1_ip4_address} | ${dut2_if1_mac} -| | dut2_v4.set_arp | ${dut2_if1} | ${dut1_dut2_ip4_address} | ${dut1_if2_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip4_address} +| | ... | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip4_address} +| | ... | ${dut1_if2_mac} + +| SNAT is initialized in a 3-node circular topology +| | [Documentation] | Initialization of 3-node topology with SNAT between DUTs: +| | ... | - set interfaces up +| | ... | - set IP addresses +| | ... | - set ARP +| | ... | - create routes +| | ... | - set SNAT - only on DUT1 +| | ... +| | Set Interface State | ${dut1} | ${dut1_if1} | up +| | Set Interface State | ${dut1} | ${dut1_if2} | up +| | Set Interface State | ${dut2} | ${dut2_if1} | up +| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | All Vpp Interfaces Ready Wait | ${nodes} +| | ... +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20 +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 11.0.0.1 | 20 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 11.0.0.2 | 20 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if2} | 12.0.0.1 | 20 +| | ... +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ... +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 11.0.0.2 | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | 11.0.0.1 | ${dut1_if2_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | 12.0.0.2 | ${tg_if2_mac} +| | ... +| | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | 11.0.0.2 | ${dut1_if2} +| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | 10.0.0.2 | ${dut1_if1} +| | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | 12.0.0.2 | ${dut2_if2} +| | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | 11.0.0.1 | ${dut2_if1} +| | ... +| | Set inside and outside interfaces | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Set deterministic mode for SNAT | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 + +| DPDK 2-node Performance Suite Setup with DUT's NIC model +| | [Documentation] +| | ... | Updates interfaces on all nodes and setup global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. Initializes DPDK test +| | ... | environment. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| DPDK 2-node Performance Suite Setup with DUT's NIC model \ +| | ... | \| L2 \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} +| | ... +| | 2-node circular Topology Variables Setup with DUT interface model +| | ... | ${nic_model} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type} +| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} + +| DPDK 3-node Performance Suite Setup with DUT's NIC model +| | [Documentation] +| | ... | Updates interfaces on all nodes and setup global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. Initializes DPDK test +| | ... | environment. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} +| | ... +| | 3-node circular Topology Variables Setup with DUT interface model +| | ... | ${nic_model} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type} +| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} + +| DPDK 3-node Performance Suite Teardown +| | [Documentation] +| | ... | Suite teardown phase with traffic generator teardown. +| | ... | Cleanup DPDK test environment. +| | ... +| | Teardown traffic generator | ${tg} +| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} + +| DPDK 2-node Performance Suite Teardown +| | [Documentation] +| | ... | Suite teardown phase with traffic generator teardown. +| | ... | Cleanup DPDK test environment. +| | ... +| | Teardown traffic generator | ${tg} +| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} + +| For DPDK Performance Test +| | [Documentation] +| | ... | Return TRUE if variable DPDK_TEST exist, otherwise FALSE. +| | ${ret} | ${tmp}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${DPDK_TEST} +| | Return From Keyword If | "${ret}" == "PASS" | ${TRUE} +| | Return From Keyword | ${FALSE} + +| Performance test setup +| | [Documentation] | Common test setup for performance tests. +| | ... +| | Reset VAT History On All DUTs | ${nodes} + +| Performance test teardown +| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ +| | ... | tests. +| | ... +| | ... | *Arguments:* +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Performance test teardown \| 4.0mpps \| 64 \| 3-node-IPv4 \| +| | ... +| | [Arguments] | ${rate} | ${framesize} | ${topology_type} +| | ... +| | Show VAT History On All DUTs | ${nodes} +| | Show statistics on all DUTs +| | Run Keyword If Test Failed +| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} +| | Remove startup configuration of VPP from all DUTs + +| Performance ndrchk test teardown +| | [Documentation] | Common test teardown for ndrchk performance tests. +| | ... +| | Show VAT History On All DUTs | ${nodes} +| | Show statistics on all DUTs +| | Remove startup configuration of VPP from all DUTs +| Performance test with vhost and VM with dpdk-testpmd teardown +| | [Documentation] | Common test teardown for performance tests which use +| | ... | vhost(s) and VM(s) with dpdk-testpmd. +| | ... +| | ... | *Arguments:* +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... | - dut1_node - Node where to clean qemu. Type: dictionary +| | ... | - dut1_vm_refs - VM references on node. Type: dictionary +| | ... | - dut2_node - Node where to clean qemu. Type: dictionary +| | ... | - dut2_vm_refs - VM references on node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Performance test with vhost and VM with dpdk-testpmd teardown \ +| | ... | \| 4.0mpps \| 64 \| 3-node-IPv4 \| ${node['DUT1']} \| ${dut_vm_refs} \ +| | ... | \| ${node['DUT2']} \| ${dut_vm_refs} \| +| | ... +| | [Arguments] | ${rate} | ${framesize} | ${topology_type} +| | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None} +| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None} +| | ... +| | Show VAT History On All DUTs | ${nodes} +| | Show Vpp Vhost On All DUTs +| | Show statistics on all DUTs +| | Run Keyword If Test Failed +| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} +| | Remove startup configuration of VPP from all DUTs +| | Run keyword unless | ${dut1_node}==${None} +| | ... | Guest VM with dpdk-testpmd Teardown | ${dut1} | ${dut1_vm_refs} +| | Run keyword unless | ${dut2_node}==${None} +| | ... | Guest VM with dpdk-testpmd Teardown | ${dut2} | ${dut2_vm_refs}