X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_configuration.robot;fp=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_configuration.robot;h=b78ede38ef5f530a8086961e56e1b01834549079;hp=6e65e26d8eaaff2d36658b4782fbdec1f462dce1;hb=402633a25be55e418534161ac2a06bf09b4747b6;hpb=6c6b9edc4690f5c4cd86334d706d7c40a81c85cf

diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot
index 6e65e26d8e..b78ede38ef 100644
--- a/resources/libraries/robot/performance/performance_configuration.robot
+++ b/resources/libraries/robot/performance/performance_configuration.robot
@@ -136,9 +136,9 @@
 | | Set Test Variable | ${dut1_if2_mac}
 | | Set Test Variable | ${dut2_if1_mac}
 | | Set Test Variable | ${dut2_if2_mac}
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1}
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1}
 | | ... | ${dut1_if1_ip4} | 24
-| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2}
+| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2}
 | | ... | ${dut2_if2_ip4} | 24
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip4} | ${tg_if1_mac}
 | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip4} | ${tg_if2_mac}
@@ -147,390 +147,6 @@
 | | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4}
 | | ... | interface=${dut2_if2}
 
-| Initialize IPv4 forwarding in circular topology
-| | [Documentation]
-| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node
-| | ... | circular topology. Get the interface MAC addresses and setup ARP on
-| | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG
-| | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix
-| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24
-| | ... | and next hop of neighbour DUT interface IPv4 address.
-| | ...
-| | ... | *Arguments:*
-| | ... | - remote_host1_ip - IP address of remote host1 (Optional).
-| | ... | Type: string
-| | ... | - remote_host2_ip - IP address of remote host2 (Optional).
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Initialize IPv4 forwarding in circular topology \
-| | ... | \| 192.168.0.1 \| 192.168.0.2 \|
-| | ...
-| | [Arguments] | ${remote_host1_ip}=${NONE} | ${remote_host2_ip}=${NONE}
-| | ...
-| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
-| | ... | Variable Should Exist | ${dut2}
-| | ...
-| | Set interfaces in path up
-| | ...
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add IP Neighbor
-| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
-| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2}
-| | ... | ELSE | Set Variable | ${dut1}
-| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2_if2}
-| | ... | ELSE | Set Variable | ${dut1_if2}
-| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 20.20.20.2 | ${tg_if2_mac}
-| | ...
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1}
-| | ... | 10.10.10.1 | 24
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2}
-| | ... | 1.1.1.1 | 30
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1}
-| | ... | 1.1.1.2 | 30
-| | Configure IP addresses on interfaces | ${dut} | ${dut_if2}
-| | ... | 20.20.20.1 | 24
-| | ...
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2
-| | ... | interface=${dut1_if2}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1
-| | ... | interface=${dut2_if1}
-| | ...
-| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
-| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 32
-| | ... | gateway=10.10.10.2 | interface=${dut1_if1}
-| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
-| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | 32
-| | ... | gateway=20.20.20.2 | interface=${dut_if2}
-| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
-| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 32
-| | ... | gateway=1.1.1.2 | interface=${dut1_if2}
-| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
-| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | 32
-| | ... | gateway=1.1.1.1 | interface=${dut2_if1}
-
-| Initialize IPv4 forwarding with scaling in circular topology
-| | [Documentation]
-| | ... | Custom setup of IPv4 topology with scalability of ip routes on all
-| | ... | DUT nodes in 2-node / 3-node circular topology
-| | ...
-| | ... | *Arguments:*
-| | ... | - count - IP route count. Type: integer
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Initialize IPv4 forwarding with scaling in 3-node circular \
-| | ... | topology \| 100000 \|
-| | ...
-| | [Arguments] | ${count}
-| | ...
-| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
-| | ... | Variable Should Exist | ${dut2}
-| | ...
-| | Set interfaces in path up
-| | ...
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add IP Neighbor
-| | ... | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac}
-| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2}
-| | ... | ELSE | Set Variable | ${dut1}
-| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2_if2}
-| | ... | ELSE | Set Variable | ${dut1_if2}
-| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg1_if2_mac}
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1
-| | ... | 30
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2
-| | ... | 30
-| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30
-| | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | gateway=1.1.1.1
-| | ... | interface=${dut1_if1} | count=${count}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | 20.0.0.0 | 32 | gateway=2.2.2.2
-| | ... | interface=${dut1_if2} | count=${count}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | 10.0.0.0 | 32 | gateway=2.2.2.1
-| | ... | interface=${dut2_if1} | count=${count}
-| | Vpp Route Add | ${dut} | 20.0.0.0 | 32 | gateway=3.3.3.1
-| | ... | interface=${dut_if2} | count=${count}
-
-| Initialize IPv4 forwarding with vhost in 2-node circular topology
-| | [Documentation]
-| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on
-| | ... | VPP node. Set UP state of all VPP interfaces in path. Create
-| | ... | nf_nodes+1 FIB tables on DUT with multipath routing. Assign each
-| | ... | Virtual interface to FIB table with Physical interface or Virtual
-| | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on
-| | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with prefix
-| | ... | /8 and next hop of neighbour IPv4 address. Setup ARP on all VPP
-| | ... | interfaces.
-| | ...
-| | ... | *Arguments:*
-| | ... | - nf_nodes - Number of guest VMs. Type: integer
-| | ...
-| | ... | *Note:*
-| | ... | Socket paths for VM are defined in following format:
-| | ... | - /var/run/vpp/sock-${VM_ID}-1
-| | ... | - /var/run/vpp/sock-${VM_ID}-2
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv4 forwarding with Vhost-User initialized in a 2-node circular\
-| | ... | topology \| 1 \|
-| | ...
-| | [Arguments] | ${nf_nodes}=${1}
-| | ...
-| | Set interfaces in path up
-| | ${fib_table_1}= | Set Variable | ${101}
-| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes}
-| | Add Fib Table | ${dut1} | ${fib_table_1}
-| | Add Fib Table | ${dut1} | ${fib_table_2}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2}
-| | Configure IP addresses on interfaces
-| | ... | ${dut1} | ${dut1_if1} | 100.0.0.1 | 30
-| | Configure IP addresses on interfaces
-| | ... | ${dut1} | ${dut1_if2} | 200.0.0.1 | 30
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg_if1_mac}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 200.0.0.2 | ${tg_if2_mac}
-| | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=100.0.0.2
-| | ... | interface=${dut1_if1} | vrf=${fib_table_1}
-| | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=200.0.0.2
-| | ... | interface=${dut1_if2} | vrf=${fib_table_2}
-| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1
-| | | ${fib_table_1}= | Evaluate | ${100}+${number}
-| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1}
-| | | Configure vhost interfaces for L2BD forwarding | ${dut1}
-| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2
-| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2
-| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up
-| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up
-| | | Add Fib Table | ${dut1} | ${fib_table_1}
-| | | Add Fib Table | ${dut1} | ${fib_table_2}
-| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1}
-| | | ... | ${fib_table_1}
-| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2}
-| | | ... | ${fib_table_2}
-| | | Configure IP addresses on interfaces
-| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1.1.1.2 | 30
-| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1.1.2.2 | 30
-| | | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=1.1.1.1
-| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1}
-| | | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=1.1.2.1
-| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2}
-
-| Initialize IPv4 forwarding with vhost in 3-node circular topology
-| | [Documentation]
-| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all
-| | ... | VPP nodes. Set UP state of all VPP interfaces in path. Create
-| | ... | nf_nodes+1 FIB tables on each DUT with multipath routing. Assign
-| | ... | each Virtual interface to FIB table with Physical interface or Virtual
-| | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on
-| | ... | DUT-TG links and /30 prefix on DUT1-DUT2 link. Set routing on all DUT
-| | ... | nodes in all FIB tables with prefix /8 and next hop of neighbour IPv4
-| | ... | address. Setup ARP on all VPP interfaces.
-| | ...
-| | ... | *Arguments:*
-| | ... | - nf_nodes - Number of guest VMs. Type: integer
-| | ...
-| | ... | *Note:*
-| | ... | Socket paths for VM are defined in following format:
-| | ... | - /var/run/vpp/sock-\${VM_ID}-1
-| | ... | - /var/run/vpp/sock-\${VM_ID}-2
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| IPv4 forwarding with Vhost-User initialized in a 3-node circular\
-| | ... | topology \| 1 \|
-| | ...
-| | [Arguments] | ${nf_nodes}=${1}
-| | ...
-| | Set interfaces in path up
-| | ${fib_table_1}= | Set Variable | ${101}
-| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes}
-| | Add Fib Table | ${dut1} | ${fib_table_1}
-| | Add Fib Table | ${dut1} | ${fib_table_2}
-| | Add Fib Table | ${dut2} | ${fib_table_1}
-| | Add Fib Table | ${dut2} | ${fib_table_2}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2}
-| | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table | ${dut2} | ${dut2_if2} | ${fib_table_2}
-| | Configure IP addresses on interfaces
-| | ... | ${dut1} | ${dut1_if1} | 100.0.0.1 | 30
-| | Configure IP addresses on interfaces
-| | ... | ${dut1} | ${dut1_if2} | 150.0.0.1 | 30
-| | Configure IP addresses on interfaces
-| | ... | ${dut2} | ${dut2_if1} | 150.0.0.2 | 30
-| | Configure IP addresses on interfaces
-| | ... | ${dut2} | ${dut2_if2} | 200.0.0.1 | 30
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg_if1_mac}
-| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 200.0.0.2 | ${tg_if2_mac}
-| | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=100.0.0.2
-| | ... | interface=${dut1_if1} | vrf=${fib_table_1}
-| | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=150.0.0.2
-| | ... | interface=${dut1_if2} | vrf=${fib_table_2}
-| | Vpp Route Add | ${dut2} | 10.0.0.0 | 8 | gateway=150.0.0.1
-| | ... | interface=${dut2_if1} | vrf=${fib_table_1}
-| | Vpp Route Add | ${dut2} | 20.0.0.0 | 8 | gateway=200.0.0.2
-| | ... | interface=${dut2_if2} | vrf=${fib_table_2}
-| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1
-| | | ${fib_table_1}= | Evaluate | ${100}+${number}
-| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1}
-| | | Configure vhost interfaces for L2BD forwarding | ${dut1}
-| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2
-| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2
-| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up
-| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up
-| | | Configure vhost interfaces for L2BD forwarding | ${dut2}
-| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2
-| | | ... | dut2-vhost-${number}-if1 | dut2-vhost-${number}-if2
-| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if1} | up
-| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up
-| | | Add Fib Table | ${dut1} | ${fib_table_1}
-| | | Add Fib Table | ${dut1} | ${fib_table_2}
-| | | Add Fib Table | ${dut2} | ${fib_table_1}
-| | | Add Fib Table | ${dut2} | ${fib_table_2}
-| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1}
-| | | ... | ${fib_table_1}
-| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2}
-| | | ... | ${fib_table_2}
-| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if1}
-| | | ... | ${fib_table_1}
-| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if2}
-| | | ... | ${fib_table_2}
-| | | Configure IP addresses on interfaces
-| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1.1.1.2 | 30
-| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1.1.2.2 | 30
-| | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | 1.1.1.2 | 30
-| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | 1.1.2.2 | 30
-| | | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=1.1.1.1
-| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1}
-| | | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=1.1.2.1
-| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2}
-| | | Vpp Route Add | ${dut2} | 20.0.0.0 | 8 | gateway=1.1.1.1
-| | | ... | interface=${dut2-vhost-${number}-if1} | vrf=${fib_table_1}
-| | | Vpp Route Add | ${dut2} | 10.0.0.0 | 8 | gateway=1.1.2.1
-| | | ... | interface=${dut2-vhost-${number}-if2} | vrf=${fib_table_2}
-
-| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
-| | [Documentation]
-| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node
-| | ... | circular topology. In case of 3-node topology create VLAN
-| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN
-| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses
-| | ... | and setup ARPs. Setup IPv4 addresses with /30 prefix on DUT-TG links
-| | ... | and set routing with prefix /30. In case of 3-node set IPv4 adresses
-| | ... | with /30 prefix on VLAN and set routing on both DUT nodes with prefix
-| | ... | /30. Set next hop of neighbour DUT interface IPv4 address. All
-| | ... | interfaces are brought up.
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_if1_net - TG interface 1 IP subnet used by traffic generator.
-| | ... | Type: integer
-| | ... | - tg_if2_net - TG interface 2 IP subnet used by traffic generator.
-| | ... | Type: integer
-| | ... | - subid - ID of the sub-interface to be created. Type: string
-| | ... | - tag_rewrite - Method of tag rewrite. Type: string
-| | ...
-| | ... | _NOTE:_ This KW uses following test case variables:
-| | ... | - dut1 - DUT1 node.
-| | ... | - dut2 - DUT2 node.
-| | ... | - dut1_if2 - DUT1 interface towards DUT2.
-| | ... | - dut2_if1 - DUT2 interface towards DUT1.
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces\
-| | ... | in circular topology \| 10.10.10.0 \| 20.20.20.0 \| 10 \| pop-1 \|
-| | ...
-| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
-| | ...
-| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
-| | ... | Variable Should Exist | ${dut2}
-| | ...
-| | Set interfaces in path up
-| | ...
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Initialize VLAN dot1q sub-interfaces in circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology
-| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure L2 tag rewrite method on interfaces | ${dut1}
-| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite}
-| | ... | ELSE | Configure L2 tag rewrite method on interfaces
-| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite}
-| | ...
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add IP Neighbor
-| | ... | ${dut1} | ${subif_index_1} | 2.2.2.2 | ${dut2_if1_mac}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Add IP Neighbor
-| | ... | ${dut2} | ${subif_index_2} | 2.2.2.1 | ${dut1_if2_mac}
-| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2}
-| | ... | ELSE | Set Variable | ${dut1}
-| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2_if2}
-| | ... | ELSE | Set Variable | ${subif_index_1}
-| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg1_if2_mac}
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure IP addresses on interfaces | ${dut1} | ${subif_index_1}
-| | ... | 2.2.2.1 | 30
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure IP addresses on interfaces | ${dut2} | ${subif_index_2}
-| | ... | 2.2.2.2 | 30
-| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30
-| | Vpp Route Add | ${dut1} | ${tg_if1_net} | 30 | gateway=1.1.1.1
-| | ... | interface=${dut1_if1}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | 30 | gateway=2.2.2.2
-| | ... | interface=${subif_index_1}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | 30 | gateway=2.2.2.1
-| | ... | interface=${subif_index_2}
-| | Vpp Route Add | ${dut} | ${tg_if2_net} | 30 | gateway=3.3.3.1
-| | ... | interface=${dut_if2}
-
 | Initialize IPv6 forwarding in circular topology
 | | [Documentation]
 | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node
@@ -730,8 +346,9 @@
 | | | ... | ${fib_table_1} | ipv6=${True}
 | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2}
 | | | ... | ${fib_table_2} | ipv6=${True}
-| | | Configure IP addresses on interfaces
+| | | VPP Interface Set IP Address
 | | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1:1::2 | 64
+| | | VPP Interface Set IP Address
 | | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1:2::2 | 64
 | | | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=1:1::1
 | | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1}
@@ -1449,12 +1066,15 @@
 | | ... | VPP Add IP Neighbor
 | | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
 | | ...
-| | Configure IP addresses on interfaces
+| | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24
+| | VPP Interface Set IP Address
 | | ... | ${dut} | ${dut_if2} | 20.20.20.1 | 24
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure IP addresses on interfaces
+| | ... | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if2} | 1.1.1.1 | 30
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Interface Set IP Address
 | | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30
 | | ...
 | | Run Keyword If | '${dut2_status}' == 'PASS'
@@ -1687,9 +1307,9 @@
 | | ... | interfaces.
 | | ...
 | | Set interfaces in path up
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1
 | | ... | 24
-| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2
+| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2
 | | ... | 24
 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
 | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
@@ -1763,9 +1383,9 @@
 | | ...
 | | [Arguments] | ${bd_id1} | ${bd_id2}
 | | ...
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1
 | | ... | 24
-| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2
+| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2
 | | ... | 24
 | | Set interfaces in path up
 | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24
@@ -1829,9 +1449,9 @@
 | | Configure vhost interfaces for L2BD forwarding | ${dut1}
 | | ... | /var/run/vpp/sock-1-${dut1_bd_id1}
 | | ... | /var/run/vpp/sock-1-${dut1_bd_id2}
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} |
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} |
 | | ... | ${dut1_address} | ${dut1_address_subnet}
-| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} |
+| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} |
 | | ... | ${dut2_address} | ${dut2_address_subnet}
 | | ${dut1_bd_id1}= | Set Variable | 1
 | | ${dut1_bd_id2}= | Set Variable | 2
@@ -2077,13 +1697,13 @@
 | | VPP Add IP Neighbor
 | | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} | ${dut1_if2_mac}
 | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac}
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1}
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1}
 | | ... | ${dut1_tg_address} | ${duts_prefix}
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2}
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2}
 | | ... | ${dut1_dut2_address} | ${duts_prefix}
-| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1}
+| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1}
 | | ... | ${dut2_dut1_address} | ${duts_prefix}
-| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2}
+| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2}
 | | ... | ${dut2_tg_address} | ${duts_prefix}
 
 | Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
@@ -2195,13 +1815,13 @@
 | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
 | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1}
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1}
 | | ... | ${dut1_tg_ip4_address} | ${prefix4}
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if2} | ${dut1_dut2_ip6_address} | ${prefix6}
 | | VPP Interface Set IP Address
 | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip6_address} | ${prefix6}
-| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2}
+| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2}
 | | ... | ${dut2_tg_ip4_address} | ${prefix4}
 | | Suppress ICMPv6 router advertisement message | ${nodes}
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac}
@@ -2273,12 +1893,12 @@
 | | ...
 | | Set interfaces in path up
 | | ...
-| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2}
+| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2}
 | | ... | 11.0.0.1 | 20
 | | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1}
+| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1}
 | | ... | 11.0.0.2 | 20
 | | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | Set Variable | ${dut2}
@@ -2286,7 +1906,7 @@
 | | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | Set Variable | ${dut2_if2}
 | | ... | ELSE | Set Variable | ${dut1_if2}
-| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 12.0.0.1 | 20
+| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 12.0.0.1 | 20
 | | ...
 | | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
 | | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
@@ -2625,148 +2245,6 @@
 | | Show Memif on all DUTs | ${nodes}
 | | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
 
-| Initialize IPv4 routing with memif pairs on DUT node
-| | [Documentation]
-| | ... | Create pairs of Memif interfaces on DUT node. Put each Memif interface
-| | ... | to separate IPv4 VRF with one physical or virtual interface
-| | ... | to create a chain accross DUT node.
-| | ...
-| | ... | *Arguments:*
-| | ... | - dut - DUT node. Type: dictionary
-| | ... | - count - Number of memif pairs (containers). Type: integer
-| | ...
-| | ... | *Note:*
-| | ... | Socket paths for Memif are defined in following format:
-| | ... | - /tmp/memif-\${dut}_CNF\${number}-\${sid}
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Initialize IPv4 routing with memif pairs on DUT node \
-| | ... | \| ${dut} \| ${1} \|
-| | ...
-| | [Arguments] | ${dut} | ${count}
-| | ...
-| | ${dut_index}= | Get Index From List | ${duts} | ${dut}
-| | ${last_dut_index}= | Evaluate | ${duts_count} - ${1}
-| | ...
-| | ${tg_if1_net}= | Set Variable | 10.10.10.0
-| | ${tg_if2_net}= | Set Variable | 20.20.20.0
-| | ...
-| | ${fib_table_1}= | Set Variable | ${10}
-| | Run Keyword If | ${fib_table_1} > ${0}
-| | ... | Add Fib Table | ${nodes['${dut}']} | ${fib_table_1}
-| | ${ip_base_if1}= | Evaluate | ${dut_index} + ${1}
-| | ${ip_net_if1}= | Set Variable
-| | ... | ${ip_base_if1}.${ip_base_if1}.${ip_base_if1}
-| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if1_net} | 24
-| | ... | vrf=${fib_table_1} | gateway=${ip_net_if1}.1
-| | ... | interface=${${dut}_if1} | multipath=${TRUE}
-| | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_if1}
-| | ... | ${fib_table_1}
-| | Configure IP addresses on interfaces | ${nodes['${dut}']} | ${${dut}_if1}
-| | ... | ${ip_net_if1}.2 | 30
-| | ${prev_node}= | Run Keyword If | ${dut_index} == ${0}
-| | ... | Set Variable | TG
-| | ... | ELSE | Get From List | ${duts} | ${dut_index-${1}}
-| | ${prev_if}= | Run Keyword If | ${dut_index} == ${0}
-| | ... | Set Variable | if1
-| | ... | ELSE | Set Variable | if2
-| | ${prev_if_mac}= | Get Interface MAC | ${nodes['${prev_node}']}
-| | ... | ${${prev_node}_${prev_if}}
-| | VPP Add IP Neighbor
-| | ... | ${nodes['${dut}']} | ${${dut}_if1} | ${ip_net_if1}.1 | ${prev_if_mac}
-| | ...
-| | ${fib_table_2}= | Evaluate | ${fib_table_1} + ${count}
-| | Add Fib Table | ${nodes['${dut}']} | ${fib_table_2}
-| | ${ip_base_if2}= | Evaluate | ${ip_base_if1} + ${1}
-| | ${ip_net_if2}= | Set Variable
-| | ... | ${ip_base_if2}.${ip_base_if2}.${ip_base_if2}
-| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if2_net} | 24
-| | ... | vrf=${fib_table_2} | gateway=${ip_net_if2}.2
-| | ... | interface=${${dut}_if2} | multipath=${TRUE}
-| | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_if2}
-| | ... | ${fib_table_2}
-| | Configure IP addresses on interfaces | ${nodes['${dut}']} | ${${dut}_if2}
-| | ... | ${ip_net_if2}.1 | 30
-| | ${next_node}= | Run Keyword If | ${dut_index} == ${last_dut_index}
-| | ... | Set Variable | TG
-| | ... | ELSE | Get From List | ${duts} | ${dut_index+${1}}
-| | ${next_if}= | Run Keyword If | ${dut_index} == ${last_dut_index}
-| | ... | Set Variable | if2
-| | ... | ELSE | Set Variable | if1
-| | ${next_if_mac}= | Get Interface MAC | ${nodes['${next_node}']}
-| | ... | ${${next_node}_${next_if}}
-| | VPP Add IP Neighbor
-| | ... | ${nodes['${dut}']} | ${${dut}_if2} | ${ip_net_if2}.2 | ${next_if_mac}
-| | ...
-| | ${fib_table_1}= | Evaluate | ${fib_table_1} - ${1}
-| | ${ip_base_start}= | Set Variable | ${31}
-| | :FOR | ${number} | IN RANGE | 1 | ${count+${1}}
-| | | ${sock1}= | Set Variable | memif-${dut}_CNF
-| | | ${sock2}= | Set Variable | memif-${dut}_CNF
-| | | Set up memif interfaces on DUT node | ${nodes['${dut}']}
-| | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1
-| | | ... | ${dut}-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int}
-| | | ${memif1}= | Set Variable | ${${dut}-memif-${number}-if1}
-| | | ${memif2}= | Set Variable | ${${dut}-memif-${number}-if2}
-| | | ${fib_table_1}= | Evaluate | ${fib_table_1} + ${1}
-| | | ${fib_table_2}= | Evaluate | ${fib_table_1} + ${1}
-| | | Run Keyword Unless | ${number} == ${count}
-| | | ... | Add Fib Table | ${nodes['${dut}']} | ${fib_table_2}
-| | | Assign Interface To Fib Table | ${nodes['${dut}']}
-| | | ... | ${memif1} | ${fib_table_1}
-| | | Assign Interface To Fib Table | ${nodes['${dut}']}
-| | | ... | ${memif2} | ${fib_table_2}
-| | | ${ip_base_memif1}= | Evaluate
-| | | ... | ${ip_base_start} + (${number} - ${1}) * ${2}
-| | | ${ip_base_memif2}= | Evaluate | ${ip_base_memif1} + ${1}
-| | | ${ip_net_memif1}= | Set Variable
-| | | ... | ${ip_base_memif1}.${ip_base_memif1}.${ip_base_memif1}
-| | | ${ip_net_memif2}= | Set Variable
-| | | ... | ${ip_base_memif2}.${ip_base_memif2}.${ip_base_memif2}
-| | | Configure IP addresses on interfaces
-| | | ... | ${nodes['${dut}']} | ${memif1} | ${ip_net_memif1}.1 | 30
-| | | ... | ${nodes['${dut}']} | ${memif2} | ${ip_net_memif2}.1 | 30
-| | | Vpp Route Add | ${nodes['${dut}']} | ${tg_if2_net} | 24
-| | | ... | vrf=${fib_table_1} | gateway=${ip_net_memif2}.1
-| | | ... | interface=${memif1}
-| | | Vpp Route Add | ${nodes['${dut}']} | ${tg_if1_net} | 24
-| | | ... | vrf=${fib_table_2} | gateway=${ip_net_memif1}.1
-| | | ... | interface=${memif2}
-| | | ${memif_if1_key}= | Get interface by sw index | ${nodes['${dut}']}
-| | | ... | ${memif1}
-| | | ${memif_if1_mac}= | Get interface mac | ${nodes['${dut}']}
-| | | ... | ${memif_if1_key}
-| | | ${memif_if2_key}= | Get interface by sw index | ${nodes['${dut}']}
-| | | ... | ${memif2}
-| | | ${memif_if2_mac}= | Get interface mac | ${nodes['${dut}']}
-| | | ... | ${memif_if2_key}
-| | | VPP Add IP Neighbor | ${nodes['${dut}']}
-| | | ... | ${memif1} | ${ip_net_memif2}.1 | ${memif_if2_mac}
-| | | VPP Add IP Neighbor | ${nodes['${dut}']}
-| | | ... | ${memif2} | ${ip_net_memif1}.1 | ${memif_if1_mac}
-
-| Initialize IPv4 routing with memif pairs
-| | [Documentation]
-| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each
-| | ... | Memif interface to separate IPv4 VRF with one physical or
-| | ... | virtual interface to create a chain accross DUT node.
-| | ...
-| | ... | *Arguments:*
-| | ... | - count - Number of memif pairs (containers). Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Initialize IPv4 routing with memif pairs \| ${1} \|
-| | ...
-| | [Arguments] | ${count}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
-| | | Initialize IPv4 routing with memif pairs on DUT node | ${dut} | ${count}
-| | Set interfaces in path up
-| | Show Memif on all DUTs | ${nodes}
-| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
-
 | Initialize L2 xconnect for single memif
 | | [Documentation]
 | | ... | Create single Memif interface on all defined VPP nodes. Cross