X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_configuration.robot;h=2e7274b0a9d7331f878825e0e84b6571b7344fdf;hp=045a5d36ef5a69700591b8afb3debba1c0117233;hb=a6018da33d315b25274d80816d8050ba66ea7901;hpb=ad71afc5baa8008bd5d4ea26f51a71eefe3fbe62 diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 045a5d36ef..2e7274b0a9 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -29,6 +29,7 @@ | Resource | resources/libraries/robot/shared/counters.robot | Resource | resources/libraries/robot/l2/l2_bridge_domain.robot | Resource | resources/libraries/robot/l2/l2_xconnect.robot +| Resource | resources/libraries/robot/l2/l2_patch.robot | Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/ip/ip6.robot | Resource | resources/libraries/robot/vm/qemu.robot @@ -37,26 +38,53 @@ | Documentation | Performance suite keywords - configuration. *** Keywords *** -| Set interfaces in path in 2-node circular topology up +| Set interfaces in path up | | [Documentation] -| | ... | *Set UP state on VPP interfaces in path on nodes in 2-node circular -| | ... | topology.* +| | ... | *Set UP state on VPP interfaces in path on all DUT nodes and set +| | ... | maximal MTU.* | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Vpp Node Interfaces Ready Wait | ${dut1} - -| Set interfaces in path in 3-node circular topology up -| | [Documentation] -| | ... | *Set UP state on VPP interfaces in path on nodes in 3-node circular -| | ... | topology.* -| | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up -| | Vpp Node Interfaces Ready Wait | ${dut1} -| | Vpp Node Interfaces Ready Wait | ${dut2} +# TODO: Rework KW to set all interfaces in path UP and set MTU (including +# software interfaces. Run KW at the start phase of VPP setup to split +# from other "functional" configuration. This will allow modularity of this +# library +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up +| | | ... | ELSE +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up +| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if2} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up +| | | ... | ELSE +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_1} | up +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_2} | up +| | All VPP Interfaces Ready Wait | ${nodes} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} +| | | ... | ELSE +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2} +| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if2} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2} +| | | ... | ELSE +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_1} +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2} +| | All VPP Interfaces Ready Wait | ${nodes} | Initialize IPSec in 3-node circular topology | | [Documentation] @@ -67,6 +95,7 @@ | | ... | with prefix /8 and next hop of neighbour DUT or TG interface IPv4 | | ... | address. | | ... +| | Set interfaces in path up | | VPP Show Crypto Device Mapping | ${dut1} | | VPP Show Crypto Device Mapping | ${dut2} | | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} @@ -101,11 +130,9 @@ | | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular | | ... | topology. Get the interface MAC addresses and setup ARP on all VPP | | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and -| | ... | /30 prefix on DUT1 link. Set routing on DUT node with prefix /24 and -| | ... | next hop of neighbour DUT interface IPv4 address. +| | ... | /30 prefix on DUT1 link. | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} @@ -114,7 +141,6 @@ | | ... | 10.10.10.1 | 24 | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | | ... | 20.20.20.1 | 24 -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize IPv4 forwarding in 3-node circular topology | | [Documentation] @@ -124,10 +150,7 @@ | | ... | /30 prefix on DUT1-DUT2 link. Set routing on both DUT nodes with | | ... | prefix /24 and next hop of neighbour DUT interface IPv4 address. | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -146,7 +169,6 @@ | | ... | 20.20.20.1 | 24 | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize IPv4 forwarding with scaling in 3-node circular topology | | [Documentation] @@ -166,10 +188,7 @@ | | ... | | [Arguments] | ${count} | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -190,169 +209,138 @@ | | ... | count=${count} | | Vpp Route Add | ${dut2} | 20.0.0.0 | 32 | 3.3.3.1 | ${dut2_if2} | | ... | count=${count} -| | All Vpp Interfaces Ready Wait | ${nodes} -| Initialize IPv4 forwarding with vhost in 3-node circular topology +| Initialize IPv4 forwarding with vhost in 2-node circular topology | | [Documentation] -| | ... | Create vhost-user interfaces in VPP. Set UP state of all VPP -| | ... | interfaces in path on nodes in 3-node circular topology. Create 2 -| | ... | FIB tables on each DUT with multipath routing. Assign pair of -| | ... | Physical and Virtual interfaces on both nodes to each FIB table. -| | ... | Setup IPv4 addresses with /30 prefix on DUT-TG links and /30 prefix -| | ... | on DUT1-DUT2 link. Set routing on all DUT nodes in all FIB tables -| | ... | with prefix /24 and next hop of neighbour IPv4 address. Setup -| | ... | ARP on all VPP interfaces. +| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on +| | ... | VPP node. Set UP state of all VPP interfaces in path. Create +| | ... | ${vm_count}+1 FIB tables on DUT with multipath routing. Assign each +| | ... | Virtual interface to FIB table with Physical interface or Virtual +| | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on +| | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with prefix +| | ... | /24 and next hop of neighbour IPv4 address. Setup ARP on all VPP +| | ... | interfaces. | | ... | | ... | *Arguments:* -| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string -| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string +| | ... | - vm_count - Number of guest VMs. Type: integer | | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. -| | ... -| | ... | *Return:* -| | ... | - No value returned +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /tmp/sock-${VM_ID}-1 +| | ... | - /tmp/sock-${VM_ID}-2 | | ... | | ... | *Example:* | | ... -| | ... | \| IPv4 forwarding with vhost initialized in a 3-node circular \ -| | ... | topology \| /tmp/sock1 \| /tmp/sock2 \| +| | ... | \| IPv4 forwarding with Vhost-User initialized in a 2-node circular\ +| | ... | topology \| 1 \| | | ... -| | [Arguments] | ${sock1} | ${sock2} +| | [Arguments] | ${vm_count}=${1} | | ... -| | Set interfaces in path in 3-node circular topology up -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} | dut1_vhost_if1 | dut1_vhost_if2 -| | ${dut1_vif1}= | Set Variable | ${dut1_vhost_if1} -| | ${dut1_vif2}= | Set Variable | ${dut1_vhost_if2} -| | Set Interface State | ${dut1} | ${dut1_vif1} | up -| | Set Interface State | ${dut1} | ${dut1_vif2} | up -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} | dut2_vhost_if1 | dut2_vhost_if2 -| | ${dut2_vif1}= | Set Variable | ${dut2_vhost_if1} -| | ${dut2_vif2}= | Set Variable | ${dut2_vhost_if2} -| | Set Interface State | ${dut2} | ${dut2_vif1} | up -| | Set Interface State | ${dut2} | ${dut2_vif2} | up -| | Add Fib Table | ${dut1} | ${fib_table_1} -| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=4.4.4.2 | interface=${dut1_vif1} | multipath=${TRUE} +| | Set interfaces in path up +| | ${fib_table_1}= | Set Variable | ${101} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${vm_count} | | Add Fib Table | ${dut1} | ${fib_table_1} | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} | | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} | | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} -| | Add Fib Table | ${dut1} | ${fib_table_2} -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=5.5.5.2 | interface=${dut1_vif2} | multipath=${TRUE} -| | Add Fib Table | ${dut2} | ${fib_table_1} -| | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} -| | Add Fib Table | ${dut2} | ${fib_table_1} -| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=4.4.4.1 | interface=${dut2_vif1} | multipath=${TRUE} -| | Add Fib Table | ${dut2} | ${fib_table_2} -| | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=5.5.5.2 | interface=${dut2_vif2} | multipath=${TRUE} -| | Add Fib Table | ${dut2} | ${fib_table_2} -| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} -| | Assign Interface To Fib Table | ${dut1} | ${dut1_vif1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} -| | Assign Interface To Fib Table | ${dut1} | ${dut1_vif2} | ${fib_table_2} -| | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1} -| | Assign Interface To Fib Table | ${dut2} | ${dut2_vif1} | ${fib_table_1} -| | Assign Interface To Fib Table | ${dut2} | ${dut2_if2} | ${fib_table_2} -| | Assign Interface To Fib Table | ${dut2} | ${dut2_vif2} | ${fib_table_2} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_vif1} | 4.4.4.1 | 30 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_vif2} | 5.5.5.1 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | 3.3.3.1 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_vif1} | 4.4.4.1 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_vif2} | 5.5.5.1 | 30 | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} | ${dut1_vif1} -| | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} | ${dut1_vif2} -| | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} | ${dut2_vif1} -| | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} | ${dut2_vif2} -| | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | ... | ${dut1_vif1_idx} -| | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | ... | ${dut1_vif2_idx} -| | ${dut2_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut2} -| | ... | ${dut2_vif1_idx} -| | ${dut2_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut2} -| | ... | ${dut2_vif2_idx} -| | Set Test Variable | ${dut1_vif1_mac} -| | Set Test Variable | ${dut1_vif2_mac} -| | Set Test Variable | ${dut2_vif1_mac} -| | Set Test Variable | ${dut2_vif2_mac} | | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_vif1} | 4.4.4.2 | 52:54:00:00:04:01 -| | Add arp on dut | ${dut1} | ${dut1_vif2} | 5.5.5.2 | 52:54:00:00:04:02 -| | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.2 | ${tg1_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_vif1} | 4.4.4.2 | 52:54:00:00:04:01 -| | Add arp on dut | ${dut2} | ${dut2_vif2} | 5.5.5.2 | 52:54:00:00:04:02 -| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 4.4.4.2 | ${dut1_vif1} -| | ... | vrf=${fib_table_1} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${tg1_if2_mac} | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1} | | ... | vrf=${fib_table_1} | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 2.2.2.2 | ${dut1_if2} | | ... | vrf=${fib_table_2} -| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 5.5.5.2 | ${dut1_vif2} -| | ... | vrf=${fib_table_2} -| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | 4.4.4.2 | ${dut2_vif1} -| | ... | vrf=${fib_table_1} -| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 2.2.2.1 | ${dut2_if1} -| | ... | vrf=${fib_table_1} -| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | 3.3.3.2 | ${dut2_if2} -| | ... | vrf=${fib_table_2} -| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 5.5.5.2 | ${dut2_vif2} -| | ... | vrf=${fib_table_2} +| | ${ip_base_start}= | Set Variable | ${4} +| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${fib_table_1}= | Evaluate | ${100}+${number} +| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} +| | | ${ip_base_vif1}= | Evaluate | ${ip_base_start}+(${number}-1)*2 +| | | ${ip_base_vif2}= | Evaluate | ${ip_base_vif1}+1 +| | | ${ip_net_vif1}= | Set Variable +| | | ... | ${ip_base_vif1}.${ip_base_vif1}.${ip_base_vif1} +| | | ${ip_net_vif2}= | Set Variable +| | | ... | ${ip_base_vif2}.${ip_base_vif2}.${ip_base_vif2} +| | | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 +| | | ... | dut1-vhost-${number}-if2 +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up +| | | Add Fib Table | ${dut1} | ${fib_table_1} +| | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} +| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1} +| | | ... | multipath=${TRUE} +| | | Add Fib Table | ${dut1} | ${fib_table_2} +| | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} +| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2} +| | | ... | multipath=${TRUE} +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${fib_table_1} +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${fib_table_2} +| | | Configure IP addresses on interfaces +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 +| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if1} +| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if2} +| | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} +| | | ... | ${dut1_vif1_idx} +| | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} +| | | ... | ${dut1_vif2_idx} +| | | Set Test Variable | ${dut1-vhost-${number}-if1_mac} +| | | ... | ${dut1_vif1_mac} +| | | Set Test Variable | ${dut1-vhost-${number}-if2_mac} +| | | ... | ${dut1_vif2_mac} +| | | ${qemu_id}= | Set Variable If | ${number} < 10 | 0${number} +| | | ... | ${number} +| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 +| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 +| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 +| | | ... | ${dut1-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 +| | | ... | ${dut1-vhost-${number}-if2} | vrf=${fib_table_2} -| Initialize IPv4 forwarding with vhost for '${nr}' VMs in 3-node circular topology +| Initialize IPv4 forwarding with vhost in 3-node circular topology | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all -| | ... | VPP nodes. Set UP state of all VPP interfaces in path. Create ${nr}+1 -| | ... | FIB tables on each DUT with multipath routing. Assign each Virtual -| | ... | interface to FIB table with Physical interface or Virtual interface on -| | ... | both nodes. Setup IPv4 addresses with /30 prefix on DUT-TG links and -| | ... | /30 prefix on DUT1-DUT2 link. Set routing on all DUT nodes in all FIB -| | ... | tables with prefix /24 and next hop of neighbour IPv4 address. Setup -| | ... | ARP on all VPP interfaces. +| | ... | VPP nodes. Set UP state of all VPP interfaces in path. Create +| | ... | ${vm_count}+1 FIB tables on each DUT with multipath routing. Assign +| | ... | each Virtual interface to FIB table with Physical interface or Virtual +| | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on +| | ... | DUT-TG links and /30 prefix on DUT1-DUT2 link. Set routing on all DUT +| | ... | nodes in all FIB tables with prefix /24 and next hop of neighbour IPv4 +| | ... | address. Setup ARP on all VPP interfaces. | | ... | | ... | *Arguments:* -| | ... | _None_ +| | ... | - vm_count - Number of guest VMs. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: | | ... | - /tmp/sock-${VM_ID}-1 | | ... | - /tmp/sock-${VM_ID}-2 | | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... | | ... | *Example:* | | ... -| | ... | \| IPv4 forwarding with Vhost-User for '2' VMs initialized in \ -| | ... | a 3-node circular topology \| +| | ... | \| IPv4 forwarding with Vhost-User initialized in a 3-node circular\ +| | ... | topology \| 1 \| +| | ... +| | [Arguments] | ${vm_count}=${1} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | ${fib_table_1}= | Set Variable | ${101} -| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nr} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${vm_count} | | Add Fib Table | ${dut1} | ${fib_table_1} | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} | | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} @@ -390,7 +378,7 @@ | | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | 3.3.3.2 | ${dut2_if2} | | ... | vrf=${fib_table_2} | | ${ip_base_start}= | Set Variable | ${4} -| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 | | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 | | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 | | | ${fib_table_1}= | Evaluate | ${100}+${number} @@ -513,6 +501,23 @@ | | Policer Classify Set Match IP | 10.10.10.2 | ${False} | | Policer Set Configuration +| Initialize IPv6 forwarding in 2-node circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular +| | ... | topology. Get the interface MAC addresses and setup neighbour on all +| | ... | VPP interfaces. Setup IPv6 addresses with /128 prefixes on all +| | ... | interfaces. +| | ... +| | Set interfaces in path up +| | ${prefix}= | Set Variable | 64 +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:1::1 | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | 2001:2::1 | ${prefix} +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} +| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | 2001:2::2 | ${tg1_if2_mac} + | Initialize IPv6 forwarding in 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular @@ -521,6 +526,7 @@ | | ... | interfaces. Set routing on both DUT nodes with prefix /64 and | | ... | next hop of neighbour DUT interface IPv6 address. | | ... +| | Set interfaces in path up | | ${prefix}= | Set Variable | 64 | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} @@ -556,6 +562,7 @@ | | ... | | [Arguments] | ${count} | | ... +| | Set interfaces in path up | | ${subn_prefix}= | Set Variable | 64 | | ${host_prefix}= | Set Variable | 128 | | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:3::1 | ${subn_prefix} @@ -677,6 +684,7 @@ | | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" | | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix} | | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1} +| | Set interfaces in path up | Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via '${behavior}' behaviour in 3-node circular topology | | [Documentation] @@ -700,9 +708,13 @@ | | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} | | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq_count_int} | | ... | ${rxq_count_int} +| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if1} +| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if2} | | Set up memif interfaces on DUT node | ${dut2} | ${sock2} | ${sock2} | | ... | ${1} | dut2-memif-1-if1 | dut2-memif-1-if2 | ${rxq_count_int} | | ... | ${rxq_count_int} +| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if1} +| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if2} | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Show Memif | ${nodes['${dut}']} @@ -785,24 +797,34 @@ | | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.am | | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} | | ... | ELSE | Fail | Unsupported behaviour: ${behavior} -| | All Vpp Interfaces Ready Wait | ${nodes} +| | Set interfaces in path up + +| Initialize L2 patch +| | [Documentation] +| | ... | Setup L2 patch topology by cross connecting two interfaces on +| | ... | each DUT. Interfaces are brought up. +| | ... +| | Set interfaces in path up +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Configure L2patch | ${nodes['${dut}']} | ${${dut}_if1} | ${${dut}_if2} | Initialize L2 xconnect in 2-node circular topology | | [Documentation] | | ... | Setup L2 xconnect topology by cross connecting two interfaces on | | ... | each DUT. Interfaces are brought up. | | ... +| | Set interfaces in path up | | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize L2 xconnect in 3-node circular topology | | [Documentation] | | ... | Setup L2 xconnect topology by cross connecting two interfaces on | | ... | each DUT. Interfaces are brought up. | | ... | +| | Set interfaces in path up | | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1_if2} | | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | [Documentation] @@ -812,7 +834,7 @@ | | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as | | ... | interfaces. | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -826,80 +848,61 @@ | | ... | 172.16.0.2 | 172.16.0.1 | | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} -| Initialize L2 xconnect with Vhost-User in 3-node circular topology +| Initialize L2 xconnect with Vhost-User on node | | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Cross -| | ... | connect each Vhost interface with one physical interface. +| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on +| | ... | defined VPP node. Add each Vhost-User interface into L2 cross-connect +| | ... | with with physical inteface or Vhost-User interface of another VM. | | ... | | ... | *Arguments:* -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - dut - DUT node. Type: string +| | ... | - vm_count - VM count. Type: integer | | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /tmp/sock-${VM_ID}-1 +| | ... | - /tmp/sock-${VM_ID}-2 | | ... | | ... | *Example:* | | ... -| | ... | \| L2 xconnect with Vhost-User initialized in a 3-node \ -| | ... | circular topology \| /tmp/sock1 \| /tmp/sock2 \| +| | ... | \| Initialize L2 xconnect with Vhost-User on node \| DUT1 \| 1 \| | | ... -| | [Arguments] | ${sock1} | ${sock2} +| | [Arguments] | ${dut} | ${vm_count}=${1} | | ... -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} | dut1_vhost_if1 | dut1_vhost_if2 -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1_vhost_if1} -| | Configure L2XC | ${dut1} | ${dut1_if2} | ${dut1_vhost_if2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} | dut2_vhost_if1 | dut2_vhost_if2 -| | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_vhost_if1} -| | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2_vhost_if2} +| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${prev_index}= | Evaluate | ${number}-1 +| | | Configure vhost interfaces for L2BD forwarding | ${nodes['${dut}']} +| | | ... | ${sock1} | ${sock2} | ${dut}-vhost-${number}-if1 +| | | ... | ${dut}-vhost-${number}-if2 +| | | ${dut_xconnect_if1}= | Set Variable If | ${number}==1 | ${${dut}_if1} +| | | ... | ${${dut}-vhost-${prev_index}-if2} +| | | Configure L2XC | ${nodes['${dut}']} | ${dut_xconnect_if1} +| | | ... | ${${dut}-vhost-${number}-if1} +| | | Run Keyword If | ${number}==${vm_count} | Configure L2XC +| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${number}-if2} | ${${dut}_if2} +| | All VPP Interfaces Ready Wait | ${nodes} -| Initialize L2 xconnect with Vhost-User for '${nr}' in 3-node circular topology +| Initialize L2 xconnect with Vhost-User | | [Documentation] -| | ... | Create pairs of Vhost-User interfaces on all defined VPP nodes. Cross -| | ... | connect each Vhost interface with one physical interface or virtual -| | ... | interface to create a chain accross DUT node. +| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on +| | ... | all VPP nodes. Add each Vhost-User interface into L2 cross-connect +| | ... | with with physical inteface or Vhost-User interface of another VM. | | ... | | ... | *Arguments:* -| | ... | _None_ -| | ... -| | ... | *Note:* -| | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - vm_count - VM count. Type: integer | | ... | | ... | *Example:* | | ... -| | ... | \| L2 xconnect with Vhost-User for '2' initialized in a 3-node \ -| | ... | circular topology \| +| | ... | \| Initialize L2 xconnect with Vhost-User \| 1 \| | | ... -| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | ${prev_index}= | Evaluate | ${number}-1 -| | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 -| | | ... | dut1-vhost-${number}-if2 -| | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} -| | | ... | ${dut1-vhost-${prev_index}-if2} -| | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1} -| | | ... | ${dut1-vhost-${number}-if1} -| | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 -| | | ... | dut2-vhost-${number}-if2 -| | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} -| | | ... | ${dut2-vhost-${prev_index}-if2} -| | | Configure L2XC | ${dut2} | ${dut2_xconnect_if1} -| | | ... | ${dut2-vhost-${number}-if1} -| | | Run Keyword If | ${number}==${nr} | Configure L2XC -| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${dut1_if2} -| | | Run Keyword If | ${number}==${nr} | Configure L2XC -| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${dut2_if2} +| | [Arguments] | ${vm_count}=${1} +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Initialize L2 xconnect with Vhost-User on node | ${dut} +| | | ... | vm_count=${vm_count} | Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology | | [Documentation] @@ -920,7 +923,7 @@ | | ... | | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -956,9 +959,12 @@ | | ... | | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up +| | Add DPDK bonded ethernet interfaces to topology file in 3-node single link topology | | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} @@ -973,6 +979,7 @@ | | ... | ${sock1} | ${sock2} | | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} | | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} +| | All VPP Interfaces Ready Wait | ${nodes} | Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology | | [Documentation] @@ -1000,16 +1007,36 @@ | | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | ${bond_mode} | | ... | ${lb_mode} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up -| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} +| | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut1_if2} +| | Run Keyword If | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} +| | ... | ${dut1_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} | | ... | ${dut1_eth_bond_if1} | | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up -| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} +| | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2_if1} +| | Run Keyword If | '${if1_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ... | ${dut2_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} +| | ... | ${dut2_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} | | ... | ${dut2_eth_bond_if1} | | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology @@ -1042,9 +1069,9 @@ | | ... | | [Arguments] | ${bd_id}=${1} | | ... +| | Set interfaces in path up | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} | | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize L2 bridge domain in 3-node circular topology | | [Documentation] @@ -1061,11 +1088,11 @@ | | ... | | [Arguments] | ${bd_id}=${1} | | ... +| | Set interfaces in path up | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} | | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} | | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id} -| | All Vpp Interfaces Ready Wait | ${nodes} | Configure IPv4 ACLs | | [Documentation] @@ -1185,9 +1212,9 @@ | | ... | - ${dut2_if1} - DUT2 interface towards DUT1. | | ... | - ${dut2_if2} - DUT2 interface towards TG. | | ... +| | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} | | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | All Vpp Interfaces Ready Wait | ${nodes} | | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} | Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology @@ -1215,10 +1242,7 @@ | | ... | - ${dut2_if1} - DUT2 interface towards DUT1. | | ... | - ${dut2_if2} - DUT2 interface towards TG. | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -1237,7 +1261,6 @@ | | ... | ${dut2} | ${dut2_if2} | 20.20.20.1 | 24 | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} -| | All Vpp Interfaces Ready Wait | ${nodes} | | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} | Configure MACIP ACLs @@ -1356,52 +1379,53 @@ | | ... | - ${dut2_if1} - DUT2 interface towards DUT1. | | ... | - ${dut2_if2} - DUT2 interface towards TG. | | ... +| | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} | | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | All Vpp Interfaces Ready Wait | ${nodes} | | Configure MACIP ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} -| Initialize L2 bridge domains with Vhost-User in 3-node circular topology +| Initialize L2 bridge domains with Vhost-User on node | | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface. +| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on +| | ... | defined VPP node. Add each Vhost-User interface into L2 bridge +| | ... | domains with learning enabled with physical inteface or Vhost-User +| | ... | interface of another VM. | | ... | | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - sock1 - Sock path for the first Vhost-User interface. Type: string -| | ... | - sock2 - Sock path for the second Vhost-User interface. Type: string +| | ... | - dut - DUT node. Type: string +| | ... | - vm_count - VM count. Type: integer | | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /tmp/sock-${VM_ID}-1 +| | ... | - /tmp/sock-${VM_ID}-2 | | ... | | ... | *Example:* | | ... -| | ... | \| L2 bridge domains with Vhost-User initialized in a 3-node \ -| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| +| | ... | \| Initialize L2 bridge domains with Vhost-User on node \| DUT1 \ +| | ... | \| 1 \| | | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} +| | [Arguments] | ${dut} | ${vm_count}=${1} | | ... -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} | dut1_vhost_if1 | dut1_vhost_if2 -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${dut1_vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${dut1_vhost_if2} | ${bd_id2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} | dut2_vhost_if1 | dut2_vhost_if2 -| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${dut2_vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_vhost_if2} | ${bd_id2} +| | ${bd_id2}= | Evaluate | ${vm_count}+1 +| | Add interface to bridge domain | ${nodes['${dut}']} +| | ... | ${${dut}_if1} | ${1} +| | Add interface to bridge domain | ${nodes['${dut}']} +| | ... | ${${dut}_if2} | ${bd_id2} +| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | Configure vhost interfaces for L2BD forwarding | ${nodes['${dut}']} +| | | ... | ${sock1} | ${sock2} | ${dut}-vhost-${number}-if1 +| | | ... | ${dut}-vhost-${number}-if2 +| | | ${bd_id2}= | Evaluate | ${number}+1 +| | | Add interface to bridge domain | ${nodes['${dut}']} +| | | ... | ${${dut}-vhost-${number}-if1} | ${number} +| | | Add interface to bridge domain | ${nodes['${dut}']} +| | | ... | ${${dut}-vhost-${number}-if2} | ${bd_id2} +| | All VPP Interfaces Ready Wait | ${nodes} -| Initialize L2 bridge domains with Vhost-User for '${nr}' VMs in 3-node circular topology +| Initialize L2 bridge domains with Vhost-User | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all | | ... | defined VPP nodes. Add each Vhost-User interface into L2 bridge @@ -1409,41 +1433,18 @@ | | ... | interface of another VM. | | ... | | ... | *Arguments:* -| | ... | _None_ -| | ... -| | ... | *Note:* -| | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - vm_count - VM count. Type: integer | | ... | | ... | *Example:* | | ... -| | ... | \| L2 bridge domains with Vhost-User for '2' VMs initialized in \ -| | ... | a 3-node circular topology \| +| | ... | \| Initialize L2 bridge domains with Vhost-User \| 1 \| | | ... -| | ${bd_id2}= | Evaluate | ${nr}+1 -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${1} -| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${1} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 -| | | ... | dut1-vhost-${number}-if2 -| | | ${bd_id2}= | Evaluate | ${number}+1 -| | | Add interface to bridge domain | ${dut1} -| | | ... | ${dut1-vhost-${number}-if1} | ${number} -| | | Add interface to bridge domain | ${dut1} -| | | ... | ${dut1-vhost-${number}-if2} | ${bd_id2} -| | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 -| | | ... | dut2-vhost-${number}-if2 -| | | Add interface to bridge domain | ${dut2} -| | | ... | ${dut2-vhost-${number}-if1} | ${number} -| | | Add interface to bridge domain | ${dut2} -| | | ... | ${dut2-vhost-${number}-if2} | ${bd_id2} +| | [Arguments] | ${vm_count}=${1} +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Initialize L2 bridge domains with Vhost-User on node | ${dut} +| | | ... | vm_count=${vm_count} | Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | [Documentation] @@ -1453,7 +1454,7 @@ | | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as | | ... | interfaces. | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | | ... | 24 | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 @@ -1468,7 +1469,6 @@ | | ... | 172.16.0.2 | 172.16.0.1 | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} | | Configure L2BD forwarding | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | [Documentation] @@ -1493,11 +1493,11 @@ | | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | | ... -| | Set interfaces in path in 3-node circular topology up | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | | ... | 24 | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | | ... | 24 +| | Set interfaces in path up | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 | | ... | 172.16.0.1 | 172.16.0.2 | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 @@ -1556,6 +1556,7 @@ | | ... | ${dut1_vxlans} | ${dut2_vxlans} | ${dut1_route_subnet} | | | ... | ${dut1_route_mask} | ${dut2_route_subnet} | ${dut2_route_mask} | | ... +| | Set interfaces in path up | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | | | ... | ${dut1_address} | ${dut1_address_subnet} | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | @@ -1584,32 +1585,6 @@ | | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${dut1_bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${dut1_bd_id2} -| Initialize L2 bridge domains with Vhost-User in 2-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string -| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| L2 bridge domains with Vhost-User initialized in a 2-node \ -| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} -| | ... -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} - | Initialize L2 bridge domains with VLAN dot1q sub-interfaces in a 3-node circular topology | | [Documentation] | | ... | Setup L2 bridge domain topology with learning enabled with VLAN @@ -1635,7 +1610,7 @@ | | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1645,7 +1620,6 @@ | | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id1} | | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology | | [Documentation] @@ -1671,7 +1645,7 @@ | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} | | ... | ${tag_rewrite} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1716,9 +1690,12 @@ | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} | | ... | ${tag_rewrite} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up +| | Add DPDK bonded ethernet interfaces to topology file in 3-node single link topology | | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} @@ -1768,16 +1745,36 @@ | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} | | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up -| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} +| | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut1_if2} +| | Run Keyword If | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} +| | ... | ${dut1_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} | | ... | ${dut1_eth_bond_if1} | | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up -| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} +| | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2_if1} +| | Run Keyword If | '${if1_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ... | ${dut2_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} +| | ... | ${dut2_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} | | ... | ${dut2_eth_bond_if1} | | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology @@ -1805,11 +1802,43 @@ | | ... | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} -| | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} -| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} | ${if2_pci} -| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} -| | | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | ${if1_pci}= | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} +| | | ${if1_1_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_1} +| | | ${if1_2_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_2} +| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if2} +| | | ${if2_pci}= | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} +| | | ${if2_1_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_1} +| | | ${if2_2_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_2} +| | | @{pci_devs}= | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Create List | ${if1_pci} +| | | ... | ELSE +| | | ... | Create List | ${if1_1_pci} | ${if1_2_pci} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Append To List | ${pci_devs} | ${if2_pci} +| | | ... | ELSE +| | | ... | Append To List | ${pci_devs} | ${if2_1_pci} | ${if2_2_pci} +| | | Run keyword | ${dut}.Add DPDK Dev | @{pci_devs} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if1_1_pci} | ${if1_1_pci} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if1_2_pci} | ${if1_2_pci} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if2_1_pci} | ${if2_1_pci} +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if2_2_pci} | ${if2_2_pci} | Add single PCI device to all DUTs | | [Documentation] @@ -1824,7 +1853,7 @@ | | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} | | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} -| Add VLAN Strip Offload switch off between DUTs in 3-node single link topology +| Add VLAN strip offload switch off between DUTs in 3-node single link topology | | [Documentation] | | ... | Add VLAN Strip Offload switch off on PCI devices between DUTs to VPP | | ... | configuration file. @@ -1834,6 +1863,20 @@ | | Run keyword | DUT2.Add DPDK Dev Parameter | ${dut2_if1_pci} | | ... | vlan-strip-offload | off +| Add VLAN strip offload switch off between DUTs in 3-node double link topology +| | [Documentation] +| | ... | Add VLAN Strip Offload switch off on PCI devices between DUTs to VPP +| | ... | configuration file. +| | ... +| | Run keyword | DUT1.Add DPDK Dev Parameter | ${dut1_if2_1_pci} +| | ... | vlan-strip-offload | off +| | Run keyword | DUT1.Add DPDK Dev Parameter | ${dut1_if2_2_pci} +| | ... | vlan-strip-offload | off +| | Run keyword | DUT2.Add DPDK Dev Parameter | ${dut2_if1_1_pci} +| | ... | vlan-strip-offload | off +| | Run keyword | DUT2.Add DPDK Dev Parameter | ${dut2_if1_2_pci} +| | ... | vlan-strip-offload | off + | Add DPDK bonded ethernet interfaces to DUTs in 3-node single link topology | | [Documentation] | | ... | Add DPDK bonded Ethernet interfaces with mode XOR and transmit policy @@ -1848,441 +1891,357 @@ | Configure guest VM with dpdk-testpmd connected via vhost-user | | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting -| | ... | DPDK testpmd. Qemu Guest uses by default 5 cores and 2048M. Testpmd -| | ... | uses 5 cores (1 main core and 4 cores dedicated to io) mem-channel=4, -| | ... | txq/rxq=256, burst=64, disable-hw-vlan, disable-rss, -| | ... | driver usr/lib/librte_pmd_virtio.so and fwd mode is io. +| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting\ +| | ... | DPDK testpmd. | | ... | | ... | *Arguments:* -| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary +| | ... | - dut - DUT node to start guest VM on. Type: dictionary | | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. +| | ... | Type: string | | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - skip - Number of cpus which will be skipped. Type: integer -| | ... | - count - Number of cpus which will be allocated for qemu. -| | ... | Type: integer -| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT node. -| | ... | Type: integer -| | ... | - jumbo_frames - Set True if jumbo frames are used in the test. +| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT +| | ... | node. Type: integer +| | ... | - jumbo - Set True if jumbo frames are used in the test. | | ... | Type: bool +| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int +| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. +| | ... | Type: bool +| | ... +| | ... | *Note:* +| | ... | KW uses test variables \${rxq_count_int}, \${thr_count_int} and +| | ... | \${cpu_count_int} set by "Add worker threads and rxqueues to all DUTs" | | ... | | ... | *Example:* | | ... | | ... | \| Configure guest VM with dpdk-testpmd connected via vhost-user \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \| ${6} \ -| | ... | \| ${5} \| -| | ... | \| Configure guest VM with dpdk-testpmd connected via vhost-user \ | | ... | \| ${nodes['DUT1']} \| /tmp/sock-2-1 \| /tmp/sock-2-2 \| DUT1_VM2 \ | | ... | \| qemu_id=${2} \| | | ... -| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} -| | ... | ${count}=${5} | ${qemu_id}=${1} | ${jumbo_frames}=${False} +| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} | ${qemu_id}=${1} +| | ... | ${jumbo}=${False} | ${perf_qemu_qsz}=${256} +| | ... | ${use_tuned_cfs}=${False} | | ... | | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id} | | ... | WITH NAME | ${vm_name} +| | Run keyword | ${vm_name}.Qemu Set Node | ${nodes['${dut}']} | | ${serial_port}= | Evaluate | ${qemu_id} + ${4555} | | Run keyword | ${vm_name}.Qemu Set Serial Port | ${serial_port} | | ${ssh_fwd_port}= | Evaluate | ${qemu_id} + ${10021} | | Run keyword | ${vm_name}.Qemu Set Ssh Fwd Port | ${ssh_fwd_port} -| | ${dut_numa}= | Get interfaces numa node | ${dut_node} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${skip_cnt}= | Evaluate | ${skip} + (${qemu_id} - 1) * ${count} -| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip_cnt} | cpu_cnt=${count} | smt_used=${False} +| | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${${dut}_if1} +| | @{if_list}= | Run Keyword If | '${if1_status}' == 'PASS' +| | ... | Create List | ${${dut}_if1} +| | ... | ELSE | Create List | ${${dut}_if1_1} | ${${dut}_if1_2} +| | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${${dut}_if2} +| | Run Keyword If | '${if2_status}' == 'PASS' +| | ... | Append To List | ${if_list} | ${${dut}_if2} +| | ... | ELSE | Append To List | ${if_list} | ${${dut}_if2_1} | ${${dut}_if2_2} +| | ${dut_numa}= | Get interfaces numa node | ${nodes['${dut}']} | @{if_list} +# Compute CPU placement for VM based on expected DUT placement. +| | ${os_cpus}= | Set Variable | ${1} +| | ${dut_main_cpus}= | Set Variable | ${1} +| | ${dut_wk_cpus}= | Set Variable | ${cpu_count_int} +| | ${vm_cpus}= | Evaluate | ${dut_wk_cpus} + ${dut_main_cpus} +| | ${skip_dut}= | Evaluate | ${dut_wk_cpus} + ${dut_main_cpus} + ${os_cpus} +| | ${skip_cpu}= | Evaluate | ${skip_dut} + (${qemu_id} - ${1}) * ${vm_cpus} +| | ${qemu_cpus}= | Cpu slice of list per node | ${nodes['${dut}']} +| | ... | ${dut_numa} | skip_cnt=${skip_cpu} | cpu_cnt=${vm_cpus} +| | ... | smt_used=${smt_used} +| | ${vm_thrs}= | Get Length | ${qemu_cpus} +| | Run keyword | ${vm_name}.Qemu Set Queue Count | ${rxq_count_int} +| | Run keyword | ${vm_name}.Qemu Set Queue Size | ${perf_qemu_qsz} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | ... | jumbo_frames=${jumbo_frames} +| | ... | jumbo_frames=${jumbo} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ... | jumbo_frames=${jumbo_frames} -| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${TRUE} +| | ... | jumbo_frames=${jumbo} +| | ${apply_patch}= | Set Variable | ${False} | | ${perf_qemu_path}= | Set Variable If | ${apply_patch} | | ... | ${perf_qemu_path}-patch/bin/ | | ... | ${perf_qemu_path}-base/bin/ -| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | apply_patch=${apply_patch} +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${nodes['${dut}']} +| | ... | apply_patch=${False} | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} -| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 +| | Run keyword | ${vm_name}.Qemu Set Smp | ${vm_thrs} | ${vm_thrs} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 | | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} | | ${vm}= | Run keyword | ${vm_name}.Qemu Start | | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy -| | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} -| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | eal_mem_channels=4 -| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE} -| | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} +| | ${max_pkt_len}= | Set Variable If | ${jumbo} | 9000 | ${EMPTY} +| | ${testpmd_cpus}= | Evaluate | ${thr_count_int} + ${1} +| | ${testpmd_cpus}= | Cpu list per node str | ${nodes['${dut}']} | ${0} +| | ... | cpu_cnt=${testpmd_cpus} +| | Dpdk Testpmd Start | ${vm} | eal_corelist=${testpmd_cpus} +| | ... | eal_mem_channels=4 | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE} +| | ... | pmd_rxd=${perf_qemu_qsz} | pmd_txd=${perf_qemu_qsz} +| | ... | pmd_rxq=${rxq_count_int} | pmd_txq=${rxq_count_int} | | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} -| Configure '${nr}' guest VMs with dpdk-testpmd connected via vhost-user in 3-node circular topology +| Configure guest VMs with dpdk-testpmd connected via vhost-user on node | | [Documentation] -| | ... | Start QEMU guests with two vhost-user interfaces and interconnecting -| | ... | DPDK testpmd for defined number of VMs on all defined VPP nodes. +| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | interconnecting DPDK testpmd for defined number of VMs on all defined\ +| | ... | VPP nodes. | | ... | | ... | *Arguments:* -| | ... | _None_ -| | ... -| | ... | _NOTE:_ This KW expects following test case variables to be set: -| | ... | - ${system_cpus} - Number of CPUs allocated for OS itself. -| | ... | - ${vpp_cpus} - Number of CPUs allocated for VPP. -| | ... | - ${vm_cpus} - Number of CPUs to be allocated per QEMU instance. -| | ... | - ${jumbo_frames} - Jumbo frames are used (True) or are not used -| | ... | (False) in the test. +| | ... | - dut - DUT node to start guest VM on. Type: dictionary +| | ... | - vm_count - Number of guest VMs. Type: int +| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) +| | ... | in the test. Type: boolean +| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int +| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. +| | ... | Type: bool | | ... | | ... | *Example:* | | ... -| | ... | \| Configure '2' guest VMs with dpdk-testpmd connected via vhost-user\ -| | ... | in 3-node circular topology \| +| | ... | \| Configure guest VMs with dpdk-testpmd connected via \ +| | ... | vhost-user on node \| DUT1 \| 1 \| False \| 256 \| +| | ... +| | [Arguments] | ${dut} | ${vm_count}=${1} | ${jumbo}=${False} | +| | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False} | | ... -| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 | | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 | | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | ${skip_cpus}= | Evaluate | ${vpp_cpus}+${system_cpus} -| | | ${vm1}= | Configure guest VM with dpdk-testpmd connected via vhost-user -| | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} -| | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} -| | | ... | jumbo_frames=${jumbo_frames} -| | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} -| | | ${vm2}= | Configure guest VM with dpdk-testpmd connected via vhost-user -| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} -| | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} -| | | ... | jumbo_frames=${jumbo_frames} -| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} - -| Configure guest VM with dpdk-testpmd using SMT connected via vhost-user +| | | ${vm}= +| | | ... | Configure guest VM with dpdk-testpmd connected via vhost-user +| | | ... | ${dut} | ${sock1} | ${sock2} | ${dut}_VM${number} +| | | ... | qemu_id=${number} | jumbo=${jumbo} | perf_qemu_qsz=${perf_qemu_qsz} +| | | ... | use_tuned_cfs=${use_tuned_cfs} +| | | Set To Dictionary | ${${dut}_vm_refs} | ${dut}_VM${number} | ${vm} + +| Configure guest VMs with dpdk-testpmd connected via vhost-user | | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting -| | ... | DPDK testpmd. Qemu Guest uses by default 5 cores and 2048M. Testpmd -| | ... | uses 5 cores (1 main core and 4 cores dedicated to io) mem-channel=4, -| | ... | txq/rxq=256, burst=64, disable-hw-vlan, disable-rss, -| | ... | driver usr/lib/librte_pmd_virtio.so and fwd mode is io. +| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | interconnecting DPDK testpmd defined number of VMs on all defined VPP\ +| | ... | nodes. | | ... | | ... | *Arguments:* -| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string -| | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - skip - number of cpus which will be skipped. Type: int -| | ... | - count - number of cpus which will be allocated for qemu. Type: int -| | ... | - jumbo_frames - Set True if jumbo frames are used in the test. +| | ... | - vm_count - Number of guest VMs. Type: int +| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) +| | ... | in the test. Type: boolean +| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int +| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. | | ... | Type: bool | | ... | | ... | *Example:* | | ... -| | ... | \| Configure guest VM with dpdk-testpmd using SMT connected via \ -| | ... | vhost-user \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ -| | ... | \| ${6} \| ${5} \| +| | ... | \| Configure guest VMs with dpdk-testpmd connected via vhost-user\ +| | ... | \| 1 \| False \| 256 \| | | ... -| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} -| | ... | ${count}=${5} | ${jumbo_frames}=${False} +| | [Arguments] | ${vm_count}=${1} | ${jumbo}=${False} | ${perf_qemu_qsz}=${256} +| | ... | ${use_tuned_cfs}=${False} | | ... -| | Import Library | resources.libraries.python.QemuUtils -| | ... | WITH NAME | ${vm_name} -| | ${dut_numa}= | Get interfaces numa node | ${dut_node} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${TRUE} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | ... | jumbo_frames=${jumbo_frames} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ... | jumbo_frames=${jumbo_frames} -| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${TRUE} -| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} -| | ... | ${perf_qemu_path}-patch/bin/ -| | ... | ${perf_qemu_path}-base/bin/ -| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} -| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 -| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 -| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} -| | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} -| | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy -| | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} -| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | eal_mem_channels=4 -| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE} -| | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} -| | ... | pmd_max_pkt_len=${max_pkt_len} -| | Return From Keyword | ${vm} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Configure guest VMs with dpdk-testpmd connected via vhost-user on node +| | | ... | ${dut} | vm_count=${vm_count} | jumbo=${jumbo} +| | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${False} | Configure guest VM with dpdk-testpmd-mac connected via vhost-user | | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting -| | ... | DPDK testpmd. Qemu Guest uses by default 5 cores and 2048M. Testpmd -| | ... | uses 5 cores (1 main core and 4 cores dedicated to io) mem-channel=4, -| | ... | txq/rxq=256, burst=64, disable-hw-vlan, disable-rss, -| | ... | driver usr/lib/librte_pmd_virtio.so and fwd mode is mac rewrite. +| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting\ +| | ... | DPDK testpmd. | | ... | | ... | *Arguments:* -| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - dut - DUT node to start guest VM on. Type: dictionary +| | ... | - sock1 - Socket path for first Vhost-User interface. +| | ... | Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. +| | ... | Type: string | | ... | - vm_name - QemuUtil instance name. Type: string | | ... | - eth0_mac - MAC address of first Vhost interface. Type: string | | ... | - eth1_mac - MAC address of second Vhost interface. Type: string -| | ... | - skip - number of cpus which will be skipped. Type: integer -| | ... | - count - number of cpus which will be allocated for qemu. -| | ... | Type: integer -| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT node. -| | ... | Type: integer -| | ... | - jumbo_frames - Set True if jumbo frames are used in the test. +| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT +| | ... | node. Type: integer +| | ... | - jumbo - Set True if jumbo frames are used in the test. +| | ... | Type: bool +| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int +| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. | | ... | Type: bool | | ... +| | ... | *Note:* +| | ... | KW uses test variables \${rxq_count_int}, \${thr_count_int} and +| | ... | \${cpu_count_int} set by "Add worker threads and rxqueues to all DUTs" +| | ... | | ... | *Example:* | | ... | | ... | \| Configure guest VM with dpdk-testpmd-mac connected via vhost-user \ | | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ -| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| ${6} \| ${5} \| -| | ... | \| Configure guest VM with dpdk-testpmd-mac connected via vhost-user \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock-2-1 \| /tmp/sock-2-2 \| DUT1_VM2 \ -| | ... | \| 00:00:00:00:02:01 \| 00:00:00:00:02:02 \| ${6} \| ${5} \ -| | ... | \| qemu_id=${2} \| +| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| | | ... -| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} -| | ... | ${eth0_mac} | ${eth1_mac} | ${skip}=${6} | ${count}=${5} -| | ... | ${qemu_id}=${1} | ${jumbo_frames}=${False} +| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} +| | ... | ${eth0_mac} | ${eth1_mac} | ${qemu_id}=${1} | ${jumbo}=${False} +| | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False} | | ... | | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id} | | ... | WITH NAME | ${vm_name} +| | Run keyword | ${vm_name}.Qemu Set Node | ${nodes['${dut}']} | | ${serial_port}= | Evaluate | ${qemu_id} + ${4555} | | Run keyword | ${vm_name}.Qemu Set Serial Port | ${serial_port} | | ${ssh_fwd_port}= | Evaluate | ${qemu_id} + ${10021} | | Run keyword | ${vm_name}.Qemu Set Ssh Fwd Port | ${ssh_fwd_port} -| | ${dut_numa}= | Get interfaces numa node | ${dut_node} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${skip_cnt}= | Evaluate | ${skip} + (${qemu_id} - 1) * ${count} -| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip_cnt} | cpu_cnt=${count} | smt_used=${False} +| | ${dut_numa}= | Get interfaces numa node | ${nodes['${dut}']} +| | ... | ${${dut}_if1} | ${${dut}_if2} +# Compute CPU placement for VM based on expected DUT placement. +| | ${os_cpus}= | Set Variable | ${1} +| | ${dut_main_cpus}= | Set Variable | ${1} +| | ${dut_wk_cpus}= | Set Variable | ${cpu_count_int} +| | ${vm_cpus}= | Evaluate | ${dut_wk_cpus} + ${dut_main_cpus} +| | ${skip_dut}= | Evaluate | ${dut_wk_cpus} + ${dut_main_cpus} + ${os_cpus} +| | ${skip_cpu}= | Evaluate | ${skip_dut} + (${qemu_id} - ${1}) * ${vm_cpus} +| | ${qemu_cpus}= | Cpu slice of list per node | ${nodes['${dut}']} +| | ... | ${dut_numa} | skip_cnt=${skip_cpu} | cpu_cnt=${vm_cpus} +| | ... | smt_used=${smt_used} +| | ${vm_thrs}= | Get Length | ${qemu_cpus} +| | Run keyword | ${vm_name}.Qemu Set Queue Count | ${rxq_count_int} +| | Run keyword | ${vm_name}.Qemu Set Queue Size | ${perf_qemu_qsz} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | ... | jumbo_frames=${jumbo_frames} +| | ... | jumbo_frames=${jumbo} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ... | jumbo_frames=${jumbo_frames} -| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${TRUE} +| | ... | jumbo_frames=${jumbo} +| | ${apply_patch}= | Set Variable | ${False} | | ${perf_qemu_path}= | Set Variable If | ${apply_patch} | | ... | ${perf_qemu_path}-patch/bin/ | | ... | ${perf_qemu_path}-base/bin/ -| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | apply_patch=${apply_patch} +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${nodes['${dut}']} +| | ... | apply_patch=${False} | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} -| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 +| | Run keyword | ${vm_name}.Qemu Set Smp | ${vm_thrs} | ${vm_thrs} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 | | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} | | ${vm}= | Run keyword | ${vm_name}.Qemu Start | | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy -| | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} -| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f +| | ${max_pkt_len}= | Set Variable If | ${jumbo} | 9000 | ${EMPTY} +| | ${testpmd_cpus}= | Evaluate | ${thr_count_int} + ${1} +| | ${testpmd_cpus}= | Cpu list per node str | ${nodes['${dut}']} | ${0} +| | ... | cpu_cnt=${testpmd_cpus} +| | Dpdk Testpmd Start | ${vm} | eal_corelist=${testpmd_cpus} | | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} | | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${TRUE} -| | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} +| | ... | pmd_rxd=${perf_qemu_qsz} | pmd_txd=${perf_qemu_qsz} +| | ... | pmd_rxq=${rxq_count_int} | pmd_txq=${rxq_count_int} | | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} -| Configure '${nr}' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology +| Configure guest VMs with dpdk-testpmd-mac connected via vhost-user on node | | [Documentation] -| | ... | Start QEMU guests with two vhost-user interfaces and interconnecting -| | ... | DPDK testpmd with fwd mode set to mac rewrite for defined number of -| | ... | VMs on all defined VPP nodes. +| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ +| | ... | defined number of VMs on all defined VPP nodes. | | ... | | ... | *Arguments:* -| | ... | _None_ +| | ... | - dut - DUT node to start guest VM on. Type: dictionary +| | ... | - vm_count} - Number of guest VMs. Type: int +| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) +| | ... | in the test. Type: boolean +| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int +| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. +| | ... | Type: bool | | ... | | ... | _NOTE:_ This KW expects following test case variables to be set: -| | ... | - ${system_cpus} - Number of CPUs allocated for OS itself. -| | ... | - ${vpp_cpus} - Number of CPUs allocated for VPP. -| | ... | - ${vm_cpus} - Number of CPUs to be allocated per QEMU instance. -| | ... | - ${jumbo_frames} - Jumbo frames are used (True) or are not used -| | ... | (False) in the test. +| | ... | - cpu_count_int - Number of Physical CPUs allocated for DUT. | | ... | | ... | *Example:* | | ... -| | ... | \| Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user\ -| | ... | in 3-node circular topology \| +| | ... | \| Configure guest VMs with dpdk-testpmd-mac connected via \ +| | ... | vhost-user on node \| DUT1 \| 1 \| False \| 256 \| | | ... -| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | [Arguments] | ${dut} | ${vm_count}=${1} | ${jumbo}=${False} | +| | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False} +| | ... +| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 | | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 | | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | ${skip_cpus}= | Evaluate | ${vpp_cpus}+${system_cpus} -| | | ${vm1}= -| | | ... | Configure guest VM with dpdk-testpmd-mac connected via vhost-user -| | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} -| | | ... | ${dut1-vhost-${number}-if1_mac} -| | | ... | ${dut1-vhost-${number}-if2_mac} | skip=${skip_cpus} -| | | ... | count=${vm_cpus} | qemu_id=${number} -| | | ... | jumbo_frames=${jumbo_frames} -| | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} -| | | ${vm2}= +| | | ${vm}= | | | ... | Configure guest VM with dpdk-testpmd-mac connected via vhost-user -| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} -| | | ... | ${dut2-vhost-${number}-if1_mac} -| | | ... | ${dut2-vhost-${number}-if2_mac} | skip=${skip_cpus} -| | | ... | count=${vm_cpus} | qemu_id=${number} -| | | ... | jumbo_frames=${jumbo_frames} -| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} - -| Configure guest VM with dpdk-testpmd-mac using SMT connected via vhost-user +| | | ... | ${dut} | ${sock1} | ${sock2} | ${dut}_VM${number} +| | | ... | ${${dut}-vhost-${number}-if1_mac} +| | | ... | ${${dut}-vhost-${number}-if2_mac} | qemu_id=${number} +| | | ... | jumbo=${jumbo} | perf_qemu_qsz=${perf_qemu_qsz} +| | | ... | use_tuned_cfs=${use_tuned_cfs} +| | | Set To Dictionary | ${${dut}_vm_refs} | ${dut}_VM${number} | ${vm} + +| Configure guest VMs with dpdk-testpmd-mac connected via vhost-user | | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting -| | ... | DPDK testpmd. Qemu Guest uses by default 5 cores and 2048M. Testpmd -| | ... | uses 5 cores (1 main core and 4 cores dedicated to io) mem-channel=4, -| | ... | txq/rxq=256, burst=64, disable-hw-vlan, disable-rss, -| | ... | driver usr/lib/librte_pmd_virtio.so and fwd mode is mac rewrite. +| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ +| | ... | defined number of VMs on all defined VPP nodes. | | ... | | ... | *Arguments:* -| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string -| | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - eth0_mac - MAC address of first Vhost interface. Type: string -| | ... | - eth1_mac - MAC address of second Vhost interface. Type: string -| | ... | - skip - number of cpus which will be skipped. Type: int -| | ... | - count - number of cpus which will be allocated for qemu. Type: int -| | ... | - jumbo_frames - Set True if jumbo frames are used in the test. +| | ... | - vm_count - Number of guest VMs. Type: int +| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) +| | ... | in the test. Type: boolean +| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int +| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. | | ... | Type: bool | | ... | | ... | *Example:* | | ... -| | ... | \| Configure guest VM with dpdk-testpmd-mac using SMT connected via \ -| | ... | vhost-user \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM\ -| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| ${6} \| ${5} \| +| | ... | \| Configure guest VMs with dpdk-testpmd-mac connected via vhost-user\ +| | ... | \| 1 \| False \| 256 \| | | ... -| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} -| | ... | ${eth0_mac} | ${eth1_mac} | ${skip}=${6} | ${count}=${5} -| | ... | ${jumbo_frames}=${False} +| | [Arguments] | ${vm_count}=${1} | ${jumbo}=${False} | ${perf_qemu_qsz}=${256} +| | ... | ${use_tuned_cfs}=${False} | | ... -| | Import Library | resources.libraries.python.QemuUtils -| | ... | WITH NAME | ${vm_name} -| | ${dut_numa}= | Get interfaces numa node | ${dut_node} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${TRUE} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | ... | jumbo_frames=${jumbo_frames} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ... | jumbo_frames=${jumbo_frames} -| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${TRUE} -| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} -| | ... | ${perf_qemu_path}-patch/bin/ -| | ... | ${perf_qemu_path}-base/bin/ -| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} -| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 -| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 -| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} -| | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} -| | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy -| | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} -| | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f -| | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} -| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${TRUE} -| | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} -| | ... | pmd_max_pkt_len=${max_pkt_len} -| | Return From Keyword | ${vm} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Configure guest VMs with dpdk-testpmd-mac connected via vhost-user on node +| | | ... | ${dut} | vm_count=${vm_count} | jumbo=${jumbo} +| | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${False} | Configure guest VM with linux bridge connected via vhost-user | | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting -| | ... | linux bridge. Qemu Guest uses 2048M. +| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting\ +| | ... | linux bridge. | | ... | | ... | *Arguments:* -| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - dut - DUT node to start guest VM on. Type: dictionary +| | ... | - sock1 - Socket path for first Vhost-User interface. +| | ... | Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. +| | ... | Type: string | | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - skip - number of cpus which will be skipped. Type: int -| | ... | - count - number of cpus which will be allocated for qemu. Type: int -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VM with linux bridge connected via vhost-user \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \| ${6} \ -| | ... | \| ${5} \| -| | ... -| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} -| | ... | ${count}=${5} -| | ... -| | Import Library | resources.libraries.python.QemuUtils -| | ... | WITH NAME | ${vm_name} -| | ${dut_numa}= | Get interfaces numa node | ${dut_node} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${False} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${TRUE} -| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} -| | ... | ${perf_qemu_path}-patch/bin/ -| | ... | ${perf_qemu_path}-base/bin/ -| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} -| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 -| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 -| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} -| | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} -| | ${br}= | Set Variable | br0 -| | ${vhost1}= | Get Vhost User If Name By Sock | ${vm} | ${sock1} -| | ${vhost2}= | Get Vhost User If Name By Sock | ${vm} | ${sock2} -| | Linux Add Bridge | ${vm} | ${br} | ${vhost1} | ${vhost2} -| | Set Interface State | ${vm} | ${vhost1} | up | if_type=name -| | Set Interface State | ${vm} | ${vhost2} | up | if_type=name -| | Set Interface State | ${vm} | ${br} | up | if_type=name -| | Return From Keyword | ${vm} - -| Configure guest VM with linux bridge using SMT connected via vhost-user -| | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting -| | ... | linux bridge. Qemu Guest uses 2048M. +| | ... | - skip_cnt - number of cpus which will be skipped. Type: int | | ... -| | ... | *Arguments:* -| | ... | - dut_node - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string -| | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - skip - number of cpus which will be skipped. Type: int -| | ... | - count - number of cpus which will be allocated for qemu. Type: int +| | ... | _NOTE:_ This KW expects following test case variables to be set: +| | ... | - cpu_count_int - Number of Physical CPUs allocated for DUT. | | ... | | ... | *Example:* | | ... -| | ... | \| Guest VM with Linux Bridge using SMT connected via vhost-user is \ -| | ... | setup \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ -| | ... | \| ${6}\| ${5} \| +| | ... | \| Configure guest VM with linux bridge connected via vhost-user \ +| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \| ${6} \| | | ... -| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} +| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} | ${skip_cnt}=${6} | | ... | ${count}=${5} | | ... | | Import Library | resources.libraries.python.QemuUtils | | ... | WITH NAME | ${vm_name} -| | ${dut_numa}= | Get interfaces numa node | ${dut_node} +| | Run keyword | ${vm_name}.Qemu Set Node | ${dut} +| | ${dut_numa}= | Get interfaces numa node | ${dut} | | ... | ${dut1_if1} | ${dut1_if2} -| | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${TRUE} +| | ${vm_phy_cpus}= | Evaluate | ${cpu_count_int} + ${1} +| | ${skip_cnt}= | Evaluate | ${skip} + (${qemu_id} - ${1}) * ${vm_phy_cpus} +| | ${qemu_cpus}= | Cpu slice of list per node | ${dut} | ${dut_numa} +| | ... | skip_cnt=${skip_cnt} | cpu_cnt=${vm_phy_cpus} | smt_used=${smt_used} +| | ${vm_thr_cpus}= | Get Length | ${qemu_cpus} +| | Run keyword | ${vm_name}.Qemu Set Queue Size | ${perf_qemu_qsz} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${TRUE} +| | ${apply_patch}= | Set Variable | ${False} | | ${perf_qemu_path}= | Set Variable If | ${apply_patch} | | ... | ${perf_qemu_path}-patch/bin/ | | ... | ${perf_qemu_path}-base/bin/ -| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut} | | ... | apply_patch=${apply_patch} | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} -| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 +| | Run keyword | ${vm_name}.Qemu Set Smp | ${vm_thr_cpus} | ${vm_thr_cpus} +| | ... | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 | | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} | | ${vm}= | Run keyword | ${vm_name}.Qemu Start @@ -2318,10 +2277,7 @@ | | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} | | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${duts_prefix} | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -2340,7 +2296,6 @@ | | ... | ${dut2_dut1_address} | ${duts_prefix} | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | | ... | ${dut2_tg_address} | ${duts_prefix} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | [Documentation] | Setup Lisp GPE IPv4 forwarding over IPsec. @@ -2375,7 +2330,6 @@ | | ... | ${dut2} | ${dut2_if1} | ${encr_alg} | ${encr_key} | | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Set interfaces in path in 3-node circular topology up | Initialize LISP IPv6 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv6 topology on all DUT nodes \ @@ -2399,6 +2353,7 @@ | | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} | | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${prefix} | | ... +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -2446,10 +2401,7 @@ | | ... | ${dut2_dut1_ip6_address} | ${dut2_tg_ip4_address} | | ... | ${prefix4} | ${prefix6} | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -2497,10 +2449,7 @@ | | ... | ${dut2_dut1_ip4_address} | ${dut2_tg_ip6_address} | | ... | ${prefix6} | ${prefix4} | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -2529,11 +2478,7 @@ | | ... | - create routes | | ... | - set NAT44 - only on DUT1 | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up -| | All Vpp Interfaces Ready Wait | ${nodes} +| | Set interfaces in path up | | ... | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20 | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 11.0.0.1 | 20 @@ -2560,105 +2505,125 @@ | | Configure deterministic mode for NAT44 | | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 -| Initialize L2 xconnect for '${nr}' memif pairs in 3-node circular topology +| Initialize L2 xconnect with memif pairs on DUT node | | [Documentation] -| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Cross -| | ... | connect each Memif interface with one physical interface or virtual -| | ... | interface to create a chain accross DUT node. +| | ... | Create pairs of Memif interfaces on DUT node. Cross connect each Memif +| | ... | interface with one physical interface or virtual interface to create +| | ... | a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | _None_ +| | ... | - ${dut} - DUT node. Type: dictionary +| | ... | - ${count} - Number of memif pairs (containers). Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} | | ... | | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 xconnect for 1 memif pairs in 3-node circular \ -| | ... | topology \| +| | ... | \| Initialize L2 xconnect with memif pairs on DUT node \| ${dut} \ +| | ... | \| ${1} \| +| | ... +| | [Arguments] | ${dut} | ${count} | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up -| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | memif-DUT1_VNF -| | | ${sock2}= | Set Variable | memif-DUT1_VNF +| | :FOR | ${number} | IN RANGE | 1 | ${count}+1 +| | | ${sock1}= | Set Variable | memif-${dut}_VNF +| | | ${sock2}= | Set Variable | memif-${dut}_VNF | | | ${prev_index}= | Evaluate | ${number}-1 -| | | Set up memif interfaces on DUT node | ${dut1} -| | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 -| | | ... | dut1-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} -| | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} -| | | ... | ${dut1-memif-${prev_index}-if2} -| | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1} -| | | ... | ${dut1-memif-${number}-if1} -| | | ${sock1}= | Set Variable | memif-DUT2_VNF -| | | ${sock2}= | Set Variable | memif-DUT2_VNF -| | | Set up memif interfaces on DUT node | ${dut2} -| | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 -| | | ... | dut2-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} -| | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} -| | | ... | ${dut2-memif-${prev_index}-if2} -| | | Configure L2XC | ${dut2} | ${dut2_xconnect_if1} -| | | ... | ${dut2-memif-${number}-if1} -| | | Run Keyword If | ${number}==${nr} | Configure L2XC -| | | ... | ${dut1} | ${dut1-memif-${number}-if2} | ${dut1_if2} -| | | Run Keyword If | ${number}==${nr} | Configure L2XC -| | | ... | ${dut2} | ${dut2-memif-${number}-if2} | ${dut2_if2} -| | All Vpp Interfaces Ready Wait | ${nodes} +| | | Set up memif interfaces on DUT node | ${nodes['${dut}']} +| | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1 +| | | ... | ${dut}-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} +| | | ${xconnect_if1}= | Set Variable If | ${number}==1 | ${${dut}_if1} +| | | ... | ${${dut}-memif-${prev_index}-if2} +| | | Configure L2XC | ${nodes['${dut}']} | ${xconnect_if1} +| | | ... | ${${dut}-memif-${number}-if1} +| | | Run Keyword If | ${number}==${count} | Configure L2XC +| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${number}-if2} | ${${dut}_if2} + +| Initialize L2 xconnect with memif pairs +| | [Documentation] +| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Cross +| | ... | connect each Memif interface with one physical interface or virtual +| | ... | interface to create a chain accross DUT node. +| | ... +| | ... | *Arguments:* +| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 xconnect with memif pairs \| ${1} \| +| | ... +| | [Arguments] | ${count}=${1} +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Initialize L2 xconnect with memif pairs on DUT node | ${dut} | ${count} +| | Set interfaces in path up | | Show Memif on all DUTs | ${nodes} -| Initialize L2 Bridge Domain for '${nr}' memif pairs in 3-node circular topology +| Initialize L2 Bridge Domain with memif pairs on DUT node | | [Documentation] -| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each -| | ... | Memif interface to separate L2 bridge domain with one physical or -| | ... | virtual interface to create a chain accross DUT node. +| | ... | Create pairs of Memif interfaces on DUT node. Put each Memif interface +| | ... | to separate L2 bridge domain with one physical or virtual interface +| | ... | to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | _None_ +| | ... | - ${dut} - DUT node. Type: dictionary +| | ... | - ${count} - Number of memif pairs (containers). Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular\ -| | ... | topology \| -| | ... -| | ${bd_id2}= | Evaluate | ${nr}+1 -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${1} -| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${1} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | memif-DUT1_VNF -| | | ${sock2}= | Set Variable | memif-DUT1_VNF -| | | Set up memif interfaces on DUT node | ${dut1} -| | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 -| | | ... | dut1-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} +| | ... | \| Initialize L2 Bridge Domain with memif pairs on DUT node \ +| | ... | \| ${dut} \| ${1} \| +| | ... +| | [Arguments] | ${dut} | ${count} +| | ... +| | ${bd_id2}= | Evaluate | ${count}+1 +| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1} +| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} +| | ... | ${bd_id2} +| | :FOR | ${number} | IN RANGE | 1 | ${count}+1 +| | | ${sock1}= | Set Variable | memif-${dut}_VNF +| | | ${sock2}= | Set Variable | memif-${dut}_VNF +| | | Set up memif interfaces on DUT node | ${nodes['${dut}']} +| | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1 +| | | ... | ${dut}-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | ${bd_id2}= | Evaluate | ${number}+1 -| | | Add interface to bridge domain | ${dut1} -| | | ... | ${dut1-memif-${number}-if1} | ${number} -| | | Add interface to bridge domain | ${dut1} -| | | ... | ${dut1-memif-${number}-if2} | ${bd_id2} -| | | ${sock1}= | Set Variable | memif-DUT2_VNF -| | | ${sock2}= | Set Variable | memif-DUT2_VNF -| | | Set up memif interfaces on DUT node | ${dut2} -| | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 -| | | ... | dut2-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} -| | | Add interface to bridge domain | ${dut2} -| | | ... | ${dut2-memif-${number}-if1} | ${number} -| | | Add interface to bridge domain | ${dut2} -| | | ... | ${dut2-memif-${number}-if2} | ${bd_id2} -| | All Vpp Interfaces Ready Wait | ${nodes} +| | | Add interface to bridge domain | ${nodes['${dut}']} +| | | ... | ${${dut}-memif-${number}-if1} | ${number} +| | | Add interface to bridge domain | ${nodes['${dut}']} +| | | ... | ${${dut}-memif-${number}-if2} | ${bd_id2} + +| Initialize L2 Bridge Domain with memif pairs +| | [Documentation] +| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each +| | ... | Memif interface to separate L2 bridge domain with one physical or +| | ... | virtual interface to create a chain accross DUT node. +| | ... +| | ... | *Arguments:* +| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 Bridge Domain with memif pairs \| ${1} \| +| | ... +| | [Arguments] | ${count}=${1} +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Initialize L2 Bridge Domain with memif pairs on DUT node | ${dut} +| | | ... | ${count} +| | Set interfaces in path up | | Show Memif on all DUTs | ${nodes} -| Initialize L2 xconnect for single memif in 3-node circular topology +| Initialize L2 xconnect for single memif | | [Documentation] | | ... | Create single Memif interface on all defined VPP nodes. Cross | | ... | connect Memif interface with one physical interface. @@ -2675,24 +2640,22 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 xconnect for single memif in 3-node circular \ -| | ... | topology \| 1 \| +| | ... | \| Initialize L2 xconnect for single memif \| 1 \| | | ... | | [Arguments] | ${number}=${1} -| | ${sock}= | Set Variable | memif-DUT1_VNF -| | Set up single memif interface on DUT node | ${dut1} | ${sock} -| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1-memif-${number}-if1} -| | ${sock}= | Set Variable | memif-DUT2_VNF -| | Set up single memif interface on DUT node | ${dut2} | ${sock} -| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2-memif-${number}-if1} -| | All Vpp Interfaces Ready Wait | ${nodes} +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${sock}= | Set Variable | memif-${dut}_VNF +| | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock} +| | | ... | ${number} | ${dut}-memif-${number}-if1 | ${rxq_count_int} +| | | ... | ${rxq_count_int} +| | | Configure L2XC | ${nodes['${dut}']} | ${${dut}_if1} +| | | ... | ${${dut}-memif-${number}-if1} +| | Set interfaces in path up | | Show Memif on all DUTs | ${nodes} -| Initialize L2 Bridge Domain for single memif in 3-node circular topology +| Initialize L2 Bridge Domain for single memif | | [Documentation] | | ... | Create single Memif interface on all defined VPP nodes. Put Memif | | ... | interface to separate L2 bridge domain with one physical interface. @@ -2709,23 +2672,49 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 Bridge Domain for single memif in 3-node circular \ -| | ... | topology \| 1 \| +| | ... | \| Initialize L2 Bridge Domain for single memif \| 1 \| | | ... | | [Arguments] | ${number}=${1} -| | ${sock}= | Set Variable | memif-DUT1_VNF -| | Set up single memif interface on DUT node | ${dut1} | ${sock} -| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${number} -| | Add interface to bridge domain | ${dut1} | ${dut1-memif-${number}-if1} -| | ... | ${number} -| | ${sock}= | Set Variable | memif-DUT2_VNF -| | Set up single memif interface on DUT node | ${dut2} | ${sock} -| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${number} -| | Add interface to bridge domain | ${dut2} | ${dut2-memif-${number}-if1} -| | ... | ${number} -| | All Vpp Interfaces Ready Wait | ${nodes} +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${sock}= | Set Variable | memif-${dut}_VNF +| | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock} +| | | ... | ${number} | ${dut}-memif-${number}-if1 | ${rxq_count_int} +| | | ... | ${rxq_count_int} +| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} +| | | ... | ${number} +| | | Add interface to bridge domain | ${nodes['${dut}']} +| | | ... | ${${dut}-memif-${number}-if1} | ${number} +| | Set interfaces in path up | | Show Memif on all DUTs | ${nodes} + +| Configure ACLs on a single interface +| | [Documentation] +| | ... | Configure ACL +| | ... +| | ... | *Arguments:* +| | ... | - dut - DUT node. Type: string +| | ... | - dut_if - DUT node interface name. Type: string +| | ... | - acl_apply_type - To what path apply the ACL - input or output. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. +| | ... | - subnets - Subnets to apply the specific ACL. Type: list +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']} +| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0 +| | ... +| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action} +| | ... | @{subnets} +| | Set Test variable | ${acl} | ${EMPTY} +| | :FOR | ${subnet} | IN | @{subnets} +| | | ${acl} = | Run Keyword If | '${acl}' == '${EMPTY}' +| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet} +| | | ... | ELSE +| | | ... | Catenate | SEPARATOR=, | ${acl} +| | | ... | ipv4 ${acl_action} src ${subnet} +| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} +| | @{acl_list} = | Create List | ${0} +| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type} +| | ... | ${acl_list}