X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_configuration.robot;h=3027daf44f9b1430eb16151f2e64c55e13acf07b;hp=ad91d9903affc9e6d39febf27041754b56b7664e;hb=8bbd6d3bd38a8c13976d33dcf75d4d44f660aaff;hpb=62af070d1834d71405600b930f3c7607dffecbe4 diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index ad91d9903a..3027daf44f 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -86,6 +86,38 @@ | | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2} | | All VPP Interfaces Ready Wait | ${nodes} +| Set single interfaces in path up +| | [Documentation] +| | ... | *Set UP state on single VPP interfaces in path on all DUT nodes and set +| | ... | maximal MTU.* +| | ... +# TODO: Rework KW to set all interfaces in path UP and set MTU (including +# software interfaces. Run KW at the start phase of VPP setup to split +# from other "functional" configuration. This will allow modularity of this +# library +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up +| | | ... | ELSE +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up +| | All VPP Interfaces Ready Wait | ${nodes} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} +| | | ... | ELSE +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2} +| | All VPP Interfaces Ready Wait | ${nodes} + | Initialize AVF interfaces | | [Documentation] | | ... | Initialize AVF interfaces on each DUT. Interfaces are brought up. @@ -199,7 +231,7 @@ | | ... | DUT nodes in 2-node / 3-node circular topology | | ... | | ... | *Arguments:* -| | ... | - ${count} - IP route count. Type: integer +| | ... | - count - IP route count. Type: integer | | ... | | ... | *Return:* | | ... | - No value returned @@ -236,9 +268,11 @@ | | Add arp on dut | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg1_if2_mac} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 | | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 +| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 +| | ... | 30 | | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 +| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 +| | ... | 30 | | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30 | | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | 1.1.1.1 | ${dut1_if1} | | ... | count=${count} @@ -255,7 +289,7 @@ | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on | | ... | VPP node. Set UP state of all VPP interfaces in path. Create -| | ... | ${vm_count}+1 FIB tables on DUT with multipath routing. Assign each +| | ... | vm_count+1 FIB tables on DUT with multipath routing. Assign each | | ... | Virtual interface to FIB table with Physical interface or Virtual | | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on | | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with prefix @@ -357,7 +391,7 @@ | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all | | ... | VPP nodes. Set UP state of all VPP interfaces in path. Create -| | ... | ${vm_count}+1 FIB tables on each DUT with multipath routing. Assign +| | ... | vm_count+1 FIB tables on each DUT with multipath routing. Assign | | ... | each Virtual interface to FIB table with Physical interface or Virtual | | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on | | ... | DUT-TG links and /30 prefix on DUT1-DUT2 link. Set routing on all DUT @@ -369,8 +403,8 @@ | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /tmp/sock-\${VM_ID}-1 +| | ... | - /tmp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... @@ -512,6 +546,92 @@ | | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 | | | ... | ${dut2-vhost-${number}-if2} | vrf=${fib_table_2} +| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. In case of 3-node topology create VLAN +| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN +| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses +| | ... | and setup ARPs. Setup IPv4 addresses with /30 prefix on DUT-TG links +| | ... | and set routing with prefix /30. In case of 3-node set IPv4 adresses +| | ... | with /30 prefix on VLAN and set routing on both DUT nodes with prefix +| | ... | /30. Set next hop of neighbour DUT interface IPv4 address. All +| | ... | interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - tg_if1_net - TG interface 1 IP subnet used by traffic generator. +| | ... | Type: integer +| | ... | - tg_if2_net - TG interface 2 IP subnet used by traffic generator. +| | ... | Type: integer +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces\ +| | ... | in circular topology \| 10.10.10.0 \| 20.20.20.0 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... +| | Set interfaces in path up +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add arp on dut | ${dut1} | ${subif_index_1} | 2.2.2.2 +| | ... | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add arp on dut | ${dut2} | ${subif_index_2} | 2.2.2.1 +| | ... | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${subif_index_1} +| | Add arp on dut | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg1_if2_mac} +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut1} | ${subif_index_1} +| | ... | 2.2.2.1 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut2} | ${subif_index_2} +| | ... | 2.2.2.2 | 30 +| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30 +| | Vpp Route Add | ${dut1} | ${tg_if1_net} | 30 | 1.1.1.1 | ${dut1_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | 30 | 2.2.2.2 +| | ... | ${subif_index_1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | 30 | 2.2.2.1 +| | ... | ${subif_index_2} +| | Vpp Route Add | ${dut} | ${tg_if2_net} | 30 | 3.3.3.1 | ${dut_if2} + | Initialize IPv4 policer 2r3c-${t} in circular topology | | [Documentation] | | ... | Setup of 2r3c color-aware or color-blind policer with dst ip match @@ -601,7 +721,7 @@ | | ... | DUT nodes in 2-node / 3-node circular topology | | ... | | ... | *Arguments:* -| | ... | - ${count} - IP route count. Type: integer +| | ... | - count - IP route count. Type: integer | | ... | | ... | *Return:* | | ... | - No value returned @@ -656,6 +776,97 @@ | | Vpp Route Add | ${dut} | 2001:2::0 | ${host_prefix} | 2001:5::2 | | ... | interface=${dut_if2} | count=${count} +| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. In case of 3-node topology create VLAN +| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN +| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses +| | ... | and setup ARPs. Setup IPv6 addresses with /64 prefix on DUT-TG links +| | ... | and set routing with prefix /64. In case of 3-node set IPv6 adresses +| | ... | with /64 prefix on VLAN and set routing on both DUT nodes with prefix +| | ... | /64. Set next hop of neighbour DUT interface IPv6 address. All +| | ... | interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - tg_if1_net - TG interface 1 IPv6 subnet used by traffic generator. +| | ... | Type: integer +| | ... | - tg_if2_net - TG interface 2 IPv6 subnet used by traffic generator. +| | ... | Type: integer +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces\ +| | ... | in circular topology \| 2001:1::0 \| 2001:2::0 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... +| | Set interfaces in path up +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... +| | ${prefix}= | Set Variable | 64 +| | ${host_prefix}= | Set Variable | 64 +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} +| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg1_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add Ip Neighbor | ${dut1} | ${subif_index_1} | 2002:2::2 +| | ... | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add Ip Neighbor | ${dut2} | ${subif_index_2} | 2002:2::1 +| | ... | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${subif_index_1} +| | Add Ip Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg1_if2_mac} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2002:1::2 | ${prefix} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Set If IPv6 Addr | ${dut1} | ${subif_index_1} | 2002:2::1 +| | ... | ${prefix} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Set If IPv6 Addr | ${dut2} | ${subif_index_2} | 2002:2::2 +| | ... | ${prefix} +| | VPP Set If IPv6 Addr | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix} +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix} | 2002:1::1 +| | ... | interface=${dut1_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | ${host_prefix} | 2002:2::2 +| | ... | interface=${subif_index_1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | ${host_prefix} | 2002:2::1 +| | ... | interface=${subif_index_2} +| | Vpp Route Add | ${dut} | ${tg_if2_net} | ${host_prefix} | 2002:3::1 +| | ... | interface=${dut_if2} + | Initialize IPv6 iAcl whitelist in 3-node circular topology | | [Documentation] | | ... | Creates classify L3 table on DUTs. IPv6 iAcl security whitelist @@ -765,7 +976,7 @@ | | ... | routes on both DUT nodes. | | ... | | ... | *Note:* -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | KW uses test variable rxq_count_int set by KW Add worker threads | | ... | and rxqueues to all DUTs | | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} @@ -929,8 +1140,8 @@ | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /tmp/sock-\${VM_ID}-1 +| | ... | - /tmp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... @@ -993,7 +1204,7 @@ | | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | | ... | | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} @@ -1034,7 +1245,7 @@ | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up | | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1108,7 +1319,7 @@ | | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} | | ... | ${dut2_eth_bond_if1} | | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1166,21 +1377,21 @@ | | ... | \| GigabitEthernet0/8/0 \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${src_ip_start} - Source IP address start. Type: string -| | ... | - ${dst_ip_start} - Destination IP address start. Type: string -| | ... | - ${ip_step} - IP address step. Type: string -| | ... | - ${sport_start} - Source port number start. Type: string -| | ... | - ${dport_start} - Destination port number start. Type: string -| | ... | - ${port_step} - Port number step. Type: string -| | ... | - ${no_hit_aces_number} - Number of not-hitting ACEs to be configured. +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - dst_ip_start - Destination IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - sport_start - Source port number start. Type: string +| | ... | - dport_start - Destination port number start. Type: string +| | ... | - port_step - Port number step. Type: string +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. | | ... | Type: integer -| | ... | - ${acl_apply_type} - To what path apply the ACL - input or output. +| | ... | - acl_apply_type - To what path apply the ACL - input or output. | | ... | Type: string -| | ... | - ${acl_action} - Action for the rule - deny, permit, permit+reflect. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. | | ... | Type: string -| | ... | - ${trex_stream1_subnet} - IP subnet used by T-Rex in direction 0->1. +| | ... | - trex_stream1_subnet - IP subnet used by T-Rex in direction 0->1. | | ... | Type: string -| | ... | - ${trex_stream2_subnet} - IP subnet used by T-Rex in direction 1->0. +| | ... | - trex_stream2_subnet - IP subnet used by T-Rex in direction 1->0. | | ... | Type: string | | ... | | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} @@ -1261,12 +1472,12 @@ | | ... | circular topology \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. | | ... | | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} @@ -1292,17 +1503,17 @@ | | ... | in 3-node circular topology \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${tg} - TG node. -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${tg_if1} - TG interface 1 towards DUT1. -| | ... | - ${tg_if2} - TG interface 2 towards DUT2 (3-node topo) or DUT1 +| | ... | - tg - TG node. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - tg_if1 - TG interface 1 towards DUT1. +| | ... | - tg_if2 - TG interface 2 towards DUT2 (3-node topo) or DUT1 | | ... | (2-node topo). -| | ... | - ${dut1_if1} - DUT1 interface 1 towards TG. -| | ... | - ${dut1_if2} - DUT1 interface 2 towards DUT2 (3-node topo) or TG +| | ... | - dut1_if1 - DUT1 interface 1 towards TG. +| | ... | - dut1_if2 - DUT1 interface 2 towards DUT2 (3-node topo) or TG | | ... | (2-node topo). -| | ... | - ${dut2_if1} - DUT2 interface 1 towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface 2 towards TG. +| | ... | - dut2_if1 - DUT2 interface 1 towards DUT1. +| | ... | - dut2_if2 - DUT2 interface 2 towards TG. | | ... | | ${dut2_status} | ${value}= | Run Keyword And Ignore Error | | ... | Variable Should Exist | ${dut2} @@ -1363,26 +1574,26 @@ | | ... | \| GigabitEthernet0/8/0 \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${src_ip_start} - Source IP address start. Type: string -| | ... | - ${ip_step} - IP address step. Type: string -| | ... | - ${src_mac_start} - Source MAC address start in format with colons. +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - src_mac_start - Source MAC address start in format with colons. | | ... | Type: string -| | ... | - ${src_mac_step} - Source MAC address step. Type: string -| | ... | - ${src_mac_mask} - Source MAC address mask. 00:00:00:00:00:00 is a +| | ... | - src_mac_step - Source MAC address step. Type: string +| | ... | - src_mac_mask - Source MAC address mask. 00:00:00:00:00:00 is a | | ... | wildcard mask. Type: string -| | ... | - ${no_hit_aces_number} - Number of not-hitting ACEs to be configured. +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. | | ... | Type: integer -| | ... | - ${acl_action} - Action for the rule - deny, permit, permit+reflect. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. | | ... | Type: string -| | ... | - ${tg_stream1_subnet} - IP subnet used by TG in direction 0->1. +| | ... | - tg_stream1_subnet - IP subnet used by TG in direction 0->1. | | ... | Type: string -| | ... | - ${tg_stream2_subnet} - IP subnet used by TG in direction 1->0. +| | ... | - tg_stream2_subnet - IP subnet used by TG in direction 1->0. | | ... | Type: string -| | ... | - ${tg_stream1_mac} - Source MAC address of traffic stream 1. +| | ... | - tg_stream1_mac - Source MAC address of traffic stream 1. | | ... | Type: string -| | ... | - ${tg_stream2_mac} - Source MAC address of traffic stream 2. +| | ... | - tg_stream2_mac - Source MAC address of traffic stream 2. | | ... | Type: string -| | ... | - ${tg_mac_mask} - MAC address mask for traffic streams. +| | ... | - tg_mac_mask - MAC address mask for traffic streams. | | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string | | ... | | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} @@ -1453,15 +1664,15 @@ | | ... | circular topology \| | | ... | | ... | _NOTE 1:_ This KW uses following test case variables: -| | ... | - ${tg} - TG node. -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${tg_if1} - TG interface towards DUT1. -| | ... | - ${tg_if2} - TG interface towards DUT2. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. +| | ... | - tg - TG node. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - tg_if1 - TG interface towards DUT1. +| | ... | - tg_if2 - TG interface towards DUT2. +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. | | ... | | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} @@ -1481,8 +1692,8 @@ | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /tmp/sock-\${VM_ID}-1 +| | ... | - /tmp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... @@ -1669,11 +1880,13 @@ | | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${dut1_bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${dut1_bd_id2} -| Initialize L2 bridge domains with VLAN dot1q sub-interfaces in a 3-node circular topology +| Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology | | [Documentation] -| | ... | Setup L2 bridge domain topology with learning enabled with VLAN -| | ... | between DUTs by connecting physical and vlan interfaces on each DUT. -| | ... | All interfaces are brought up. +| | ... | Setup L2 bridge domain topology with learning enabled with VLAN by +| | ... | connecting physical and vlan interfaces on each DUT. In case of 3-node +| | ... | topology create VLAN sub-interfaces between DUTs. In case of 2-node +| | ... | topology create VLAN sub-interface on dut1-if2 interface. All +| | ... | interfaces are brought up. | | ... | | ... | *Arguments:* | | ... | - bd_id1 - Bridge domain ID. Type: integer @@ -1682,10 +1895,10 @@ | | ... | - tag_rewrite - Method of tag rewrite. Type: string | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. | | ... | | ... | *Example:* | | ... @@ -1694,23 +1907,38 @@ | | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} | | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... | | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} +| | ... | ${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} +| | ... | ${bd_id2} -| Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology +| Initialize L2 bridge domains with Vhost-User and VLAN in circular topology | | [Documentation] | | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each | | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface. -| | ... | Setup VLAN between DUTs. All interfaces are brought up. +| | ... | with physical inteface. In case of 3-node topology create VLAN +| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN +| | ... | sub-interface on dut1-if2 interface. All interfaces are brought up. | | ... | | ... | *Arguments:* | | ... | - bd_id1 - Bridge domain ID. Type: integer @@ -1722,31 +1950,46 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in a 3-node\ -| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| 10 \ -| | ... | \| pop-1 \| +| | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in circular\ +| | ... | topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| 10 \| pop-1 \| | | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} | | ... | ${tag_rewrite} | | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... | | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... | | Configure vhost interfaces for L2BD forwarding | ${dut1} | | ... | ${sock1} | ${sock2} | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure vhost interfaces for L2BD forwarding | ${dut2} | | ... | ${sock1} | ${sock2} -| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} +| | ... | ${bd_id1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} | Initialize L2 bridge domains with Vhost-User and VLAN with DPDK link bonding in a 3-node circular topology | | [Documentation] @@ -1780,7 +2023,7 @@ | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up | | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1861,7 +2104,7 @@ | | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} | | ... | ${dut2_eth_bond_if1} | | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1931,9 +2174,7 @@ | | ... | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | ${if1_pci}= | Run Keyword If | '${dut}' == 'DUT1' | Get Interface PCI Addr -| | | ... | ${nodes['${dut}']} | ${${dut}_if1} | ELSE | Get Interface PCI Addr -| | | ... | ${nodes['${dut}']} | ${${dut}_if2} +| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} | | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} | | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} @@ -2067,7 +2308,7 @@ | Configure guest VMs with dpdk-testpmd connected via vhost-user on node | | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ | | ... | interconnecting DPDK testpmd for defined number of VMs on all defined\ | | ... | VPP nodes. | | ... @@ -2100,7 +2341,7 @@ | Configure guest VMs with dpdk-testpmd connected via vhost-user | | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ | | ... | interconnecting DPDK testpmd defined number of VMs on all defined VPP\ | | ... | nodes. | | ... @@ -2215,7 +2456,7 @@ | Configure guest VMs with dpdk-testpmd-mac connected via vhost-user on node | | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ | | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ | | ... | defined number of VMs on all defined VPP nodes. | | ... @@ -2253,7 +2494,7 @@ | Configure guest VMs with dpdk-testpmd-mac connected via vhost-user | | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ | | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ | | ... | defined number of VMs on all defined VPP nodes. | | ... @@ -2344,11 +2585,11 @@ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${dut2_dut1_address} - Ip address from DUT2 to DUT1. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${duts_prefix} - ip prefix. Type: int +| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - duts_prefix - ip prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2385,8 +2626,8 @@ | | [Documentation] | Setup Lisp GPE IPv4 forwarding over IPsec. | | ... | | ... | *Arguments:* -| | ... | -${encr_alg} - Encryption algorithm. Type: string -| | ... | -${auth_alg} - Authentication algorithm. Type: string +| | ... | - encr_alg - Encryption algorithm. Type: string +| | ... | - auth_alg - Authentication algorithm. Type: string | | ... | | ... | *Return:* | | ... | - No value returned @@ -2420,11 +2661,11 @@ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${dut2_dut1_address} - Ip address from DUT2 to DUT1. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${duts_prefix} - ip prefix. Type: int +| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - duts_prefix - ip prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2463,14 +2704,14 @@ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | - ${dut1_dut2_ip6_address} - IPv6 address from DUT1 to DUT2. +| | ... | - dut1_dut2_ip6_address - IPv6 address from DUT1 to DUT2. | | ... | Type: string -| | ... | - ${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string -| | ... | - ${dut2_dut1_ip6_address} - IPv6 address from DUT2 to DUT1. +| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_ip6_address - IPv6 address from DUT2 to DUT1. | | ... | Type: string -| | ... | - ${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string -| | ... | - ${prefix4} - IPv4 prefix. Type: int -| | ... | - ${prefix6} - IPv6 prefix. Type: int +| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string +| | ... | - prefix4 - IPv4 prefix. Type: int +| | ... | - prefix6 - IPv6 prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2511,14 +2752,14 @@ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | - ${dut1_dut2_ip4_address} - IPv4 address from DUT1 to DUT2. +| | ... | - dut1_dut2_ip4_address - IPv4 address from DUT1 to DUT2. | | ... | Type: string -| | ... | - ${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string -| | ... | - ${dut2_dut1_ip4_address} - IPv4 address from DUT2 to DUT1. +| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_ip4_address - IPv4 address from DUT2 to DUT1. | | ... | Type: string -| | ... | - ${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string -| | ... | - ${prefix4} - IPv4 prefix. Type: int -| | ... | - ${prefix6} - IPv6 prefix. Type: int +| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string +| | ... | - prefix4 - IPv4 prefix. Type: int +| | ... | - prefix6 - IPv6 prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2615,14 +2856,14 @@ | | ... | a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${dut} - DUT node. Type: dictionary -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - dut - DUT node. Type: dictionary +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} +| | ... | - /tmp/memif-\${dut}_VNF\${number}-\${sid} | | ... -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | KW uses test variable \${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs | | ... | | ... | *Example:* @@ -2653,7 +2894,7 @@ | | ... | interface to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Example:* | | ... @@ -2674,12 +2915,12 @@ | | ... | to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${dut} - DUT node. Type: dictionary -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - dut - DUT node. Type: dictionary +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} +| | ... | - /tmp/memif-\${dut}_VNF\${number}-\${sid} | | ... | | ... | *Example:* | | ... @@ -2711,7 +2952,7 @@ | | ... | virtual interface to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Example:* | | ... @@ -2733,12 +2974,12 @@ | | ... | to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${dut} - DUT node. Type: dictionary -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - dut - DUT node. Type: dictionary +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} +| | ... | - /tmp/memif-\${dut}_VNF\${number}-\${sid} | | ... | | ... | *Example:* | | ... @@ -2854,7 +3095,7 @@ | | ... | virtual interface to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Example:* | | ... @@ -2874,11 +3115,11 @@ | | ... | connect Memif interface with one physical interface. | | ... | | ... | *Arguments:* -| | ... | - ${number} - Memif ID. Type: integer +| | ... | - number - Memif ID. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... | - /tmp/memif-DUT1_VNF\${number}-\${sid} | | ... | | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs @@ -2897,7 +3138,7 @@ | | | ... | ${rxq_count_int} | | | Configure L2XC | ${nodes['${dut}']} | ${${dut}_if1} | | | ... | ${${dut}-memif-${number}-if1} -| | Set interfaces in path up +| | Set single interfaces in path up | | Show Memif on all DUTs | ${nodes} | Initialize L2 Bridge Domain for single memif @@ -2906,11 +3147,11 @@ | | ... | interface to separate L2 bridge domain with one physical interface. | | ... | | ... | *Arguments:* -| | ... | - ${number} - Memif ID. Type: integer +| | ... | - number - Memif ID. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... | - /tmp/memif-DUT1_VNF\${number}-\${sid} | | ... | | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs @@ -2931,7 +3172,7 @@ | | | ... | ${number} | | | Add interface to bridge domain | ${nodes['${dut}']} | | | ... | ${${dut}-memif-${number}-if1} | ${number} -| | Set interfaces in path up +| | Set single interfaces in path up | | Show Memif on all DUTs | ${nodes} | Configure ACLs on a single interface