X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_configuration.robot;h=6e65e26d8eaaff2d36658b4782fbdec1f462dce1;hp=a43556132d9a8fceeded82128713f4f05f13fc17;hb=7d7259ab1a065f0d1f849b29270514eacd3a1efe;hpb=92d4e47bfbca31e10c44dee7f74da4c6fd9e6e4c diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index a43556132d..6e65e26d8e 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,28 +14,30 @@ *** Settings *** | Library | Collections | Library | String -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Classify.Classify | Library | resources.libraries.python.DpdkUtil | Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.VhostUser -| Library | resources.libraries.python.TrafficGenerator -| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl -| Library | resources.libraries.python.Classify | Library | resources.libraries.python.IPUtil | Library | resources.libraries.python.L2Util -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/l2/l2_patch.robot +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.TestConfig +| Library | resources.libraries.python.TrafficGenerator +| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl +| Library | resources.libraries.python.VhostUser +| ... | Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +| Resource | resources/libraries/robot/l2/l2_patch.robot +| Resource | resources/libraries/robot/l2/l2_xconnect.robot | Resource | resources/libraries/robot/l2/tagging.robot | Resource | resources/libraries/robot/overlay/srv6.robot -| Documentation | Performance suite keywords - configuration. +| Resource | resources/libraries/robot/shared/counters.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| ... +| Documentation | Performance suite keywords - configuration *** Keywords *** | Set interfaces in path up @@ -45,17 +47,71 @@ | | ... # TODO: Rework KW to set all interfaces in path UP and set MTU (including # software interfaces. Run KW at the start phase of VPP setup to split -# from other "functial" configuration. This will allow modularity of this +# from other "functional" configuration. This will allow modularity of this # library -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up -| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up -| | All VPP Interfaces Ready Wait | ${nodes} -| | ${duts}= | Get Matches | ${nodes} | DUT* +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up +| | | ... | ELSE +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up +| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if2} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up +| | | ... | ELSE +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_1} | up +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_2} | up +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} +| | | ... | ELSE +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2} +| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if2} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2} +| | | ... | ELSE +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_1} +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2} +| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300} + +| Set single interfaces in path up +| | [Documentation] +| | ... | *Set UP state on single VPP interfaces in path on all DUT nodes and set +| | ... | maximal MTU.* +| | ... +# TODO: Rework KW to set all interfaces in path UP and set MTU (including +# software interfaces. Run KW at the start phase of VPP setup to split +# from other "functional" configuration. This will allow modularity of this +# library +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up +| | | ... | ELSE +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up | | :FOR | ${dut} | IN | @{duts} -| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} -| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} +| | | ... | ELSE +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2} | | All VPP Interfaces Ready Wait | ${nodes} | Initialize IPSec in 3-node circular topology @@ -68,8 +124,6 @@ | | ... | address. | | ... | | Set interfaces in path up -| | VPP Show Crypto Device Mapping | ${dut1} -| | VPP Show Crypto Device Mapping | ${dut2} | | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if1_mac}= | Get Interface MAC | ${dut1} | ${dut1_if1} @@ -84,71 +138,97 @@ | | Set Test Variable | ${dut2_if2_mac} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | | ... | ${dut1_if1_ip4} | 24 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} -| | ... | ${dut1_if2_ip4} | 24 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} -| | ... | ${dut2_if1_ip4} | 24 | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | | ... | ${dut2_if2_ip4} | 24 -| | Add arp on dut | ${dut1} | ${dut1_if1} | ${tg_if1_ip4} | ${tg_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | ${dut2_if1_ip4} | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | ${tg_if2_ip4} | ${tg_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | ${dut1_if2_ip4} | ${dut1_if2_mac} -| | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | ${tg_if1_ip4} | ${dut1_if1} -| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | ${tg_if2_ip4} | ${dut2_if2} - -| Initialize IPv4 forwarding in 2-node circular topology +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip4} | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip4} | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | gateway=${tg_if1_ip4} +| | ... | interface=${dut1_if1} +| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4} +| | ... | interface=${dut2_if2} + +| Initialize IPv4 forwarding in circular topology | | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular -| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP -| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and -| | ... | /30 prefix on DUT1 link. +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. Get the interface MAC addresses and setup ARP on +| | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG +| | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix +| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24 +| | ... | and next hop of neighbour DUT interface IPv4 address. | | ... -| | Set interfaces in path up -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 20.20.20.2 | ${tg1_if2_mac} -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} -| | ... | 10.10.10.1 | 24 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} -| | ... | 20.20.20.1 | 24 - -| Initialize IPv4 forwarding in 3-node circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular -| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP -| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and -| | ... | /30 prefix on DUT1-DUT2 link. Set routing on both DUT nodes with -| | ... | prefix /24 and next hop of neighbour DUT interface IPv4 address. +| | ... | *Arguments:* +| | ... | - remote_host1_ip - IP address of remote host1 (Optional). +| | ... | Type: string +| | ... | - remote_host2_ip - IP address of remote host2 (Optional). +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv4 forwarding in circular topology \ +| | ... | \| 192.168.0.1 \| 192.168.0.2 \| +| | ... +| | [Arguments] | ${remote_host1_ip}=${NONE} | ${remote_host2_ip}=${NONE} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} | | ... | | Set interfaces in path up -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | ... +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 20.20.20.2 | ${tg_if2_mac} +| | ... | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | | ... | 10.10.10.1 | 24 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | | ... | 1.1.1.1 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | | ... | 1.1.1.2 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} +| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | | ... | 20.20.20.1 | 24 -| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} -| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} - -| Initialize IPv4 forwarding with scaling in 3-node circular topology +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2 +| | ... | interface=${dut1_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1 +| | ... | interface=${dut2_if1} +| | ... +| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}' +| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 32 +| | ... | gateway=10.10.10.2 | interface=${dut1_if1} +| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}' +| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | 32 +| | ... | gateway=20.20.20.2 | interface=${dut_if2} +| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}' +| | ... | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 32 +| | ... | gateway=1.1.1.2 | interface=${dut1_if2} +| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}' +| | ... | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | 32 +| | ... | gateway=1.1.1.1 | interface=${dut2_if1} + +| Initialize IPv4 forwarding with scaling in circular topology | | [Documentation] | | ... | Custom setup of IPv4 topology with scalability of ip routes on all -| | ... | DUT nodes in 3-node circular topology +| | ... | DUT nodes in 2-node / 3-node circular topology | | ... | | ... | *Arguments:* -| | ... | - ${count} - IP route count. Type: integer +| | ... | - count - IP route count. Type: integer | | ... | | ... | *Return:* | | ... | - No value returned @@ -160,233 +240,187 @@ | | ... | | [Arguments] | ${count} | | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... | | Set interfaces in path up +| | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.1 | ${tg1_if2_mac} +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg1_if2_mac} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | 3.3.3.2 | 30 -| | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | 1.1.1.1 | ${dut1_if1} -| | ... | count=${count} -| | Vpp Route Add | ${dut1} | 20.0.0.0 | 32 | 2.2.2.2 | ${dut1_if2} -| | ... | count=${count} -| | Vpp Route Add | ${dut2} | 10.0.0.0 | 32 | 2.2.2.1 | ${dut2_if1} -| | ... | count=${count} -| | Vpp Route Add | ${dut2} | 20.0.0.0 | 32 | 3.3.3.1 | ${dut2_if2} -| | ... | count=${count} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 +| | ... | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 +| | ... | 30 +| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30 +| | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | gateway=1.1.1.1 +| | ... | interface=${dut1_if1} | count=${count} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 20.0.0.0 | 32 | gateway=2.2.2.2 +| | ... | interface=${dut1_if2} | count=${count} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 10.0.0.0 | 32 | gateway=2.2.2.1 +| | ... | interface=${dut2_if1} | count=${count} +| | Vpp Route Add | ${dut} | 20.0.0.0 | 32 | gateway=3.3.3.1 +| | ... | interface=${dut_if2} | count=${count} | Initialize IPv4 forwarding with vhost in 2-node circular topology | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on | | ... | VPP node. Set UP state of all VPP interfaces in path. Create -| | ... | ${vm_count}+1 FIB tables on DUT with multipath routing. Assign each +| | ... | nf_nodes+1 FIB tables on DUT with multipath routing. Assign each | | ... | Virtual interface to FIB table with Physical interface or Virtual | | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on | | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with prefix -| | ... | /24 and next hop of neighbour IPv4 address. Setup ARP on all VPP +| | ... | /8 and next hop of neighbour IPv4 address. Setup ARP on all VPP | | ... | interfaces. | | ... | | ... | *Arguments:* -| | ... | - vm_count - Number of guest VMs. Type: integer +| | ... | - nf_nodes - Number of guest VMs. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /var/run/vpp/sock-${VM_ID}-1 +| | ... | - /var/run/vpp/sock-${VM_ID}-2 | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 forwarding with Vhost-User initialized in a 2-node circular\ | | ... | topology \| 1 \| | | ... -| | [Arguments] | ${vm_count}=${1} +| | [Arguments] | ${nf_nodes}=${1} | | ... | | Set interfaces in path up | | ${fib_table_1}= | Set Variable | ${101} -| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${vm_count} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes} | | Add Fib Table | ${dut1} | ${fib_table_1} -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} -| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} -| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1} -| | ... | vrf=${fib_table_1} -| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 2.2.2.2 | ${dut1_if2} -| | ... | vrf=${fib_table_2} -| | ${ip_base_start}= | Set Variable | ${4} -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | Configure IP addresses on interfaces +| | ... | ${dut1} | ${dut1_if1} | 100.0.0.1 | 30 +| | Configure IP addresses on interfaces +| | ... | ${dut1} | ${dut1_if2} | 200.0.0.1 | 30 +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 200.0.0.2 | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=100.0.0.2 +| | ... | interface=${dut1_if1} | vrf=${fib_table_1} +| | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=200.0.0.2 +| | ... | interface=${dut1_if2} | vrf=${fib_table_2} +| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 | | | ${fib_table_1}= | Evaluate | ${100}+${number} | | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} -| | | ${ip_base_vif1}= | Evaluate | ${ip_base_start}+(${number}-1)*2 -| | | ${ip_base_vif2}= | Evaluate | ${ip_base_vif1}+1 -| | | ${ip_net_vif1}= | Set Variable -| | | ... | ${ip_base_vif1}.${ip_base_vif1}.${ip_base_vif1} -| | | ${ip_net_vif2}= | Set Variable -| | | ... | ${ip_base_vif2}.${ip_base_vif2}.${ip_base_vif2} | | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 -| | | ... | dut1-vhost-${number}-if2 +| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 +| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2 | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up | | | Add Fib Table | ${dut1} | ${fib_table_1} -| | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1} -| | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut1} | ${fib_table_2} -| | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2} -| | | ... | multipath=${TRUE} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} | | | ... | ${fib_table_1} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} | | | ... | ${fib_table_2} | | | Configure IP addresses on interfaces -| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 -| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 -| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if1} -| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if2} -| | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif1_idx} -| | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif2_idx} -| | | Set Test Variable | ${dut1-vhost-${number}-if1_mac} -| | | ... | ${dut1_vif1_mac} -| | | Set Test Variable | ${dut1-vhost-${number}-if2_mac} -| | | ... | ${dut1_vif2_mac} -| | | ${qemu_id}= | Set Variable If | ${number} < 10 | 0${number} -| | | ... | ${number} -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if1} -| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2} -| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 -| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 -| | | ... | ${dut1-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 -| | | ... | ${dut1-vhost-${number}-if2} | vrf=${fib_table_2} +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1.1.1.2 | 30 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1.1.2.2 | 30 +| | | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=1.1.1.1 +| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=1.1.2.1 +| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2} | Initialize IPv4 forwarding with vhost in 3-node circular topology | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all | | ... | VPP nodes. Set UP state of all VPP interfaces in path. Create -| | ... | ${vm_count}+1 FIB tables on each DUT with multipath routing. Assign +| | ... | nf_nodes+1 FIB tables on each DUT with multipath routing. Assign | | ... | each Virtual interface to FIB table with Physical interface or Virtual | | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on | | ... | DUT-TG links and /30 prefix on DUT1-DUT2 link. Set routing on all DUT -| | ... | nodes in all FIB tables with prefix /24 and next hop of neighbour IPv4 +| | ... | nodes in all FIB tables with prefix /8 and next hop of neighbour IPv4 | | ... | address. Setup ARP on all VPP interfaces. | | ... | | ... | *Arguments:* -| | ... | - vm_count - Number of guest VMs. Type: integer +| | ... | - nf_nodes - Number of guest VMs. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /var/run/vpp/sock-\${VM_ID}-1 +| | ... | - /var/run/vpp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 forwarding with Vhost-User initialized in a 3-node circular\ | | ... | topology \| 1 \| | | ... -| | [Arguments] | ${vm_count}=${1} +| | [Arguments] | ${nf_nodes}=${1} | | ... | | Set interfaces in path up | | ${fib_table_1}= | Set Variable | ${101} -| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${vm_count} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes} | | Add Fib Table | ${dut1} | ${fib_table_1} -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} -| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_1} -| | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_2} -| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} | | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut2} | ${dut2_if2} | ${fib_table_2} -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | 3.3.3.1 | 30 -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.2 | ${tg1_if2_mac} -| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1} -| | ... | vrf=${fib_table_1} -| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 2.2.2.2 | ${dut1_if2} -| | ... | vrf=${fib_table_2} -| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 2.2.2.1 | ${dut2_if1} -| | ... | vrf=${fib_table_1} -| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | 3.3.3.2 | ${dut2_if2} -| | ... | vrf=${fib_table_2} -| | ${ip_base_start}= | Set Variable | ${4} -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | Configure IP addresses on interfaces +| | ... | ${dut1} | ${dut1_if1} | 100.0.0.1 | 30 +| | Configure IP addresses on interfaces +| | ... | ${dut1} | ${dut1_if2} | 150.0.0.1 | 30 +| | Configure IP addresses on interfaces +| | ... | ${dut2} | ${dut2_if1} | 150.0.0.2 | 30 +| | Configure IP addresses on interfaces +| | ... | ${dut2} | ${dut2_if2} | 200.0.0.1 | 30 +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 200.0.0.2 | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=100.0.0.2 +| | ... | interface=${dut1_if1} | vrf=${fib_table_1} +| | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=150.0.0.2 +| | ... | interface=${dut1_if2} | vrf=${fib_table_2} +| | Vpp Route Add | ${dut2} | 10.0.0.0 | 8 | gateway=150.0.0.1 +| | ... | interface=${dut2_if1} | vrf=${fib_table_1} +| | Vpp Route Add | ${dut2} | 20.0.0.0 | 8 | gateway=200.0.0.2 +| | ... | interface=${dut2_if2} | vrf=${fib_table_2} +| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 | | | ${fib_table_1}= | Evaluate | ${100}+${number} | | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} -| | | ${ip_base_vif1}= | Evaluate | ${ip_base_start}+(${number}-1)*2 -| | | ${ip_base_vif2}= | Evaluate | ${ip_base_vif1}+1 -| | | ${ip_net_vif1}= | Set Variable -| | | ... | ${ip_base_vif1}.${ip_base_vif1}.${ip_base_vif1} -| | | ${ip_net_vif2}= | Set Variable -| | | ... | ${ip_base_vif2}.${ip_base_vif2}.${ip_base_vif2} | | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 -| | | ... | dut1-vhost-${number}-if2 +| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 +| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2 | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up | | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 -| | | ... | dut2-vhost-${number}-if2 +| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 +| | | ... | dut2-vhost-${number}-if1 | dut2-vhost-${number}-if2 | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if1} | up | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up | | | Add Fib Table | ${dut1} | ${fib_table_1} -| | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1} -| | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut1} | ${fib_table_2} -| | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2} -| | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut2} | ${fib_table_1} -| | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut2-vhost-${number}-if1} -| | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut2} | ${fib_table_2} -| | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut2-vhost-${number}-if2} -| | | ... | multipath=${TRUE} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} | | | ... | ${fib_table_1} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} @@ -396,188 +430,404 @@ | | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if2} | | | ... | ${fib_table_2} | | | Configure IP addresses on interfaces -| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 -| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 -| | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 -| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 -| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if1} -| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if2} -| | | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} -| | | ... | ${dut2-vhost-${number}-if1} -| | | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} -| | | ... | ${dut2-vhost-${number}-if2} -| | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif1_idx} -| | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif2_idx} -| | | ${dut2_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut2} -| | | ... | ${dut2_vif1_idx} -| | | ${dut2_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut2} -| | | ... | ${dut2_vif2_idx} -| | | Set Test Variable | ${dut1-vhost-${number}-if1_mac} -| | | ... | ${dut1_vif1_mac} -| | | Set Test Variable | ${dut1-vhost-${number}-if2_mac} -| | | ... | ${dut1_vif2_mac} -| | | Set Test Variable | ${dut2-vhost-${number}-if1_mac} -| | | ... | ${dut2_vif1_mac} -| | | Set Test Variable | ${dut2-vhost-${number}-if2_mac} -| | | ... | ${dut2_vif2_mac} -| | | ${qemu_id}= | Set Variable If | ${number} < 10 | 0${number} -| | | ... | ${number} -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if1} -| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2} -| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 -| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if1} -| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 -| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if2} -| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 -| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 -| | | ... | ${dut1-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 -| | | ... | ${dut1-vhost-${number}-if2} | vrf=${fib_table_2} -| | | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 -| | | ... | ${dut2-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 -| | | ... | ${dut2-vhost-${number}-if2} | vrf=${fib_table_2} - -| Initialize IPv4 policer 2r3c-${t} in 3-node circular topology -| | [Documentation] -| | ... | Setup of 2r3c color-aware or color-blind policer with dst ip match -| | ... | on all DUT nodes in 3-node circular topology. Policer is applied on -| | ... | links TG - DUT1 and DUT2 - TG. -| | ... -| | ${dscp}= | DSCP AF22 -| | Policer Set Name | policer1 -| | Policer Set CIR | ${cir} -| | Policer Set EIR | ${eir} -| | Policer Set CB | ${cb} -| | Policer Set EB | ${eb} -| | Policer Set Rate Type pps -| | Policer Set Round Type Closest -| | Policer Set Type 2R3C 2698 -| | Policer Set Conform Action Transmit -| | Policer Set Exceed Action Mark and Transmit | ${dscp} -| | Policer Set Violate Action Transmit -| | Policer Enable Color Aware -| | Run Keyword If | ${t} == 'ca' | Policer Enable Color Aware -| | Policer Classify Set Precolor Exceed -| | Policer Set Node | ${dut1} -| | Policer Classify Set Interface | ${dut1_if1} -| | Policer Classify Set Match IP | 20.20.20.2 | ${False} -| | Policer Set Configuration -| | Policer Set Node | ${dut2} -| | Policer Classify Set Interface | ${dut2_if2} -| | Policer Classify Set Match IP | 10.10.10.2 | ${False} -| | Policer Set Configuration - -| Initialize IPv6 forwarding in 2-node circular topology +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1.1.1.2 | 30 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1.1.2.2 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | 1.1.1.2 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | 1.1.2.2 | 30 +| | | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=1.1.1.1 +| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=1.1.2.1 +| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2} +| | | Vpp Route Add | ${dut2} | 20.0.0.0 | 8 | gateway=1.1.1.1 +| | | ... | interface=${dut2-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut2} | 10.0.0.0 | 8 | gateway=1.1.2.1 +| | | ... | interface=${dut2-vhost-${number}-if2} | vrf=${fib_table_2} + +| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology | | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular -| | ... | topology. Get the interface MAC addresses and setup neighbour on all -| | ... | VPP interfaces. Setup IPv6 addresses with /128 prefixes on all -| | ... | interfaces. +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. In case of 3-node topology create VLAN +| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN +| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses +| | ... | and setup ARPs. Setup IPv4 addresses with /30 prefix on DUT-TG links +| | ... | and set routing with prefix /30. In case of 3-node set IPv4 adresses +| | ... | with /30 prefix on VLAN and set routing on both DUT nodes with prefix +| | ... | /30. Set next hop of neighbour DUT interface IPv4 address. All +| | ... | interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - tg_if1_net - TG interface 1 IP subnet used by traffic generator. +| | ... | Type: integer +| | ... | - tg_if2_net - TG interface 2 IP subnet used by traffic generator. +| | ... | Type: integer +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces\ +| | ... | in circular topology \| 10.10.10.0 \| 20.20.20.0 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} | | ... | | Set interfaces in path up -| | ${prefix}= | Set Variable | 64 +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:1::1 | ${prefix} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | 2001:2::1 | ${prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} -| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | 2001:2::2 | ${tg1_if2_mac} - -| Initialize IPv6 forwarding in 3-node circular topology +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut1} | ${subif_index_1} | 2.2.2.2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${subif_index_2} | 2.2.2.1 | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${subif_index_1} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg1_if2_mac} +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut1} | ${subif_index_1} +| | ... | 2.2.2.1 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut2} | ${subif_index_2} +| | ... | 2.2.2.2 | 30 +| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30 +| | Vpp Route Add | ${dut1} | ${tg_if1_net} | 30 | gateway=1.1.1.1 +| | ... | interface=${dut1_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | 30 | gateway=2.2.2.2 +| | ... | interface=${subif_index_1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | 30 | gateway=2.2.2.1 +| | ... | interface=${subif_index_2} +| | Vpp Route Add | ${dut} | ${tg_if2_net} | 30 | gateway=3.3.3.1 +| | ... | interface=${dut_if2} + +| Initialize IPv6 forwarding in circular topology | | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular -| | ... | topology. Get the interface MAC addresses and setup neighbour on all -| | ... | VPP interfaces. Setup IPv6 addresses with /128 prefixes on all -| | ... | interfaces. Set routing on both DUT nodes with prefix /64 and -| | ... | next hop of neighbour DUT interface IPv6 address. +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. Get the interface MAC addresses and setup neighbor +| | ... | on all VPP interfaces. Setup IPv6 addresses with /64 prefix on DUT-TG +| | ... | links. In case of 3-node topology setup IPv6 adresses with /64 prefix +| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /64 +| | ... | and next hop of neighbour DUT interface IPv4 address. +| | ... +| | ... | *Arguments:* +| | ... | - remote_host1_ip - IP address of remote host1 (Optional). +| | ... | Type: string +| | ... | - remote_host2_ip - IP address of remote host2 (Optional). +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv6 forwarding in circular topology \ +| | ... | \| 3ffe:5f::1 \| 3ffe:5f::2 \| +| | ... +| | [Arguments] | ${remote_host1_ip}=${NONE} | ${remote_host2_ip}=${NONE} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} | | ... | | Set interfaces in path up -| | ${prefix}= | Set Variable | 64 -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:1::1 | ${prefix} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | 2001:3::1 | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | 2001:3::2 | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | 2001:2::1 | ${prefix} +| | ... +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | 2001:3::1 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | 2001:3::2 | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2001:2::2 | ${tg_if2_mac} +| | ... +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:1::1 | 64 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2001:3::1 | 64 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 2001:3::2 | 64 +| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2001:2::1 | 64 +| | ... | | Suppress ICMPv6 router advertisement message | ${nodes} -| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} -| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | 2001:3::2 | ${dut2_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | 2001:3::1 | ${dut1_if2_mac} -| | Vpp Route Add | ${dut1} | 2001:2::0 | ${prefix} | 2001:3::2 | ${dut1_if2} -| | Vpp Route Add | ${dut2} | 2001:1::0 | ${prefix} | 2001:3::1 | ${dut2_if1} - -| Initialize IPv6 forwarding with scaling in 3-node circular topology +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=2001:3::2 +| | ... | interface=${dut1_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | 64 | gateway=2001:3::1 +| | ... | interface=${dut2_if1} +| | ... +| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}' +| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 128 +| | ... | gateway=2001:1::2 | interface=${dut1_if1} +| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}' +| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | 128 +| | ... | gateway=2001:2::2 | interface=${dut_if2} +| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}' +| | ... | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 128 +| | ... | gateway=2001:3::2 | interface=${dut1_if2} +| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}' +| | ... | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | 128 +| | ... | gateway=2001:3::1 | interface=${dut2_if1} + +| Initialize IPv6 forwarding with scaling in circular topology | | [Documentation] | | ... | Custom setup of IPv6 topology with scalability of ip routes on all -| | ... | DUT nodes in 3-node circular topology +| | ... | DUT nodes in 2-node / 3-node circular topology | | ... | | ... | *Arguments:* -| | ... | - ${count} - IP route count. Type: integer +| | ... | - count - IP route count. Type: integer | | ... | | ... | *Return:* | | ... | - No value returned | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize IPv6 forwarding with scaling in 3-node circular \ +| | ... | \| Initialize IPv6 forwarding with scaling in circular \ | | ... | topology \| 100000 \| | | ... | | [Arguments] | ${count} | | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... | | Set interfaces in path up -| | ${subn_prefix}= | Set Variable | 64 -| | ${host_prefix}= | Set Variable | 128 -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:3::1 | ${subn_prefix} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | 2001:4::1 | ${subn_prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | 2001:4::2 | ${subn_prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | 2001:5::1 | ${subn_prefix} +| | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ${prefix}= | Set Variable | 64 +| | ${host_prefix}= | Set Variable | 128 +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:3::1 | ${prefix} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | 2001:4::1 | ${prefix} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | 2001:4::2 | ${prefix} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} +| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2001:5::1 | ${prefix} | | Suppress ICMPv6 router advertisement message | ${nodes} -| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:3::2 | ${tg1_if1_mac} -| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | 2001:4::2 | ${dut2_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | 2001:4::1 | ${dut1_if2_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:5::2 | ${tg1_if2_mac} -| | Vpp Route Add | ${dut1} | 2001:2::0 | ${host_prefix} | 2001:4::2 -| | ... | interface=${dut1_if2} | count=${count} -| | Vpp Route Add | ${dut1} | 2001:1::0 | ${host_prefix} | 2001:3::2 +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:3::2 | ${tg1_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add Ip Neighbor +| | ... | ${dut1} | ${dut1_if2} | 2001:4::2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add Ip Neighbor +| | ... | ${dut2} | ${dut2_if1} | 2001:4::1 | ${dut1_if2_mac} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2001:5::2 | ${tg1_if2_mac} +| | Vpp Route Add | ${dut1} | 2001:1::0 | ${host_prefix} | gateway=2001:3::2 | | ... | interface=${dut1_if1} | count=${count} -| | Vpp Route Add | ${dut2} | 2001:1::0 | ${host_prefix} | 2001:4::1 -| | ... | interface=${dut2_if1} | count=${count} -| | Vpp Route Add | ${dut2} | 2001:2::0 | ${host_prefix} | 2001:5::2 -| | ... | interface=${dut2_if2} | count=${count} - -| Initialize IPv6 iAcl whitelist in 3-node circular topology +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | ${host_prefix} +| | ... | gateway=2001:4::2 | interface=${dut1_if2} | count=${count} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | ${host_prefix} +| | ... | gateway=2001:4::1 | interface=${dut2_if1} | count=${count} +| | Vpp Route Add | ${dut} | 2001:2::0 | ${host_prefix} | gateway=2001:5::2 +| | ... | interface=${dut_if2} | count=${count} + +| Initialize IPv6 forwarding with vhost in 2-node circular topology +| | [Documentation] +| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on \ +| | ... | VPP node. Set UP state of all VPP interfaces in path. Create \ +| | ... | nf_nodes+1 FIB tables on DUT with multipath routing. Assign each \ +| | ... | Virtual interface to FIB table with Physical interface or Virtual \ +| | ... | interface on both nodes. Setup IPv6 addresses with /64 prefix on \ +| | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with \ +| | ... | prefix /64 and next hop of neighbour IPv6 address. Setup neighbours \ +| | ... | on all VPP interfaces. +| | ... +| | ... | *Arguments:* +| | ... | - nf_nodes - Number of guest VMs. Type: integer +| | ... +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /var/run/vpp/sock-${VM_ID}-1 +| | ... | - /var/run/vpp/sock-${VM_ID}-2 +| | ... +| | ... | *Example:* +| | ... +| | ... | \| IPv6 forwarding with Vhost-User initialized in a 2-node circular\ +| | ... | topology \| 1 \| +| | ... +| | [Arguments] | ${nf_nodes}=${1} +| | ... +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Set interfaces in path up +| | ${prefix}= | Set Variable | 64 +| | ${fib_table_1}= | Set Variable | ${101} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes} +| | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True} +| | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True} +| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} +| | ... | ipv6=${True} +| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} +| | ... | ipv6=${True} +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:100::1 +| | ... | ${prefix} +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2001:200::1 +| | ... | ${prefix} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:100::2 | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 2001:200::2 | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=2001:100::2 +| | ... | interface=${dut1_if1} | vrf=${fib_table_1} +| | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=2001:200::2 +| | ... | interface=${dut1_if2} | vrf=${fib_table_2} +| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 +| | | ${fib_table_1}= | Evaluate | ${100}+${number} +| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} +| | | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 +| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2 +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up +| | | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True} +| | | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True} +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${fib_table_1} | ipv6=${True} +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${fib_table_2} | ipv6=${True} +| | | Configure IP addresses on interfaces +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1:1::2 | 64 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1:2::2 | 64 +| | | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=1:1::1 +| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=1:2::1 +| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2} + +| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology | | [Documentation] -| | ... | Creates classify L3 table on DUTs. IPv6 iAcl security whitelist -| | ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. -| | ... -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip6 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip6 | dst | 2001:2::2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip6 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip6 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip6 | dst | 2001:1::2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip6 | ${table_idx} +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. In case of 3-node topology create VLAN +| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN +| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses +| | ... | and setup ARPs. Setup IPv6 addresses with /64 prefix on DUT-TG links +| | ... | and set routing with prefix /64. In case of 3-node set IPv6 adresses +| | ... | with /64 prefix on VLAN and set routing on both DUT nodes with prefix +| | ... | /64. Set next hop of neighbour DUT interface IPv6 address. All +| | ... | interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - tg_if1_net - TG interface 1 IPv6 subnet used by traffic generator. +| | ... | Type: integer +| | ... | - tg_if2_net - TG interface 2 IPv6 subnet used by traffic generator. +| | ... | Type: integer +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces\ +| | ... | in circular topology \| 2001:1::0 \| 2001:2::0 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... +| | Set interfaces in path up +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... +| | ${prefix}= | Set Variable | 64 +| | ${host_prefix}= | Set Variable | 64 +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg1_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add Ip Neighbor +| | ... | ${dut1} | ${subif_index_1} | 2002:2::2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add Ip Neighbor +| | ... | ${dut2} | ${subif_index_2} | 2002:2::1 | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${subif_index_1} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg1_if2_mac} +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2002:1::2 | ${prefix} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address | ${dut1} | ${subif_index_1} | 2002:2::1 +| | ... | ${prefix} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2} | 2002:2::2 +| | ... | ${prefix} +| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix} +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix} +| | ... | gateway=2002:1::1 | interface=${dut1_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | ${host_prefix} +| | ... | gateway=2002:2::2 | interface=${subif_index_1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | ${host_prefix} +| | ... | gateway=2002:2::1 | interface=${subif_index_2} +| | Vpp Route Add | ${dut} | ${tg_if2_net} | ${host_prefix} +| | ... | gateway=2002:3::1 | interface=${dut_if2} | Initialize IPv6 forwarding over SRv6 with encapsulation with '${n}' x SID '${prepos}' decapsulation in 3-node circular topology | | [Documentation] @@ -591,29 +841,35 @@ | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} | | Suppress ICMPv6 router advertisement message | ${nodes} | | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2 | | | ${hexa_nr}= | Convert To Hex | ${number} -| | | Add Ip Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} -| | | ... | ${tg1_if1_mac} -| | | Add Ip Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} -| | | ... | ${tg1_if2_mac} -| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} +| | | VPP Add IP Neighbor | ${dut1} +| | | ... | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} | ${tg1_if1_mac} +| | | VPP Add IP Neighbor | ${dut2} +| | | ... | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} | ${tg1_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} | | ${sid1}= | Set Variable If | | ... | "${n}" == "1" | ${dut2_sid1} | | ... | "${n}" == "2" | ${dut2_sid1_1} | | ${sid2}= | Set Variable If | | ... | "${n}" == "1" | ${dut1_sid2} | | ... | "${n}" == "2" | ${dut1_sid2_1} -| | Vpp Route Add | ${dut1} | ${sid1} | ${sid_prefix} | ${dut2_if1_ip6} -| | ... | ${dut1_if2} -| | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | ${dut1_if2_ip6} -| | ... | ${dut2_if1} +| | Vpp Route Add | ${dut1} | ${sid1} | ${sid_prefix} | gateway=${dut2_if1_ip6} +| | ... | interface=${dut1_if2} +| | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | gateway=${dut1_if2_ip6} +| | ... | interface=${dut2_if1} # Configure SRv6 for direction0 | | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} | | @{sid_list_dir0}= | Run Keyword If | "${n}" == "1" @@ -634,7 +890,7 @@ | | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2 | | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" | | ... | Vpp Route Add | ${dut2} | ${dut2_sid1_2} | ${sid_prefix} -| | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2} +| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2} # Configure SRv6 for direction1 | | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} | | @{sid_list_dir1}= | Run Keyword If | "${n}" == "1" @@ -655,7 +911,7 @@ | | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2 | | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" | | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix} -| | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1} +| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1} | | Set interfaces in path up | Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via '${behavior}' behaviour in 3-node circular topology @@ -668,15 +924,15 @@ | | ... | routes on both DUT nodes. | | ... | | ... | *Note:* -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | KW uses test variable rxq_count_int set by KW Add worker threads | | ... | and rxqueues to all DUTs | | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | ${sock1}= | Set Variable | memif-DUT1_VNF -| | ${sock2}= | Set Variable | memif-DUT2_VNF +| | ${sock1}= | Set Variable | memif-DUT1_CNF +| | ${sock2}= | Set Variable | memif-DUT2_CNF | | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} | | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq_count_int} | | ... | ${rxq_count_int} @@ -690,39 +946,45 @@ | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Show Memif | ${nodes['${dut}']} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1-memif-1-if1} -| | ... | ${dut1-memif-1-if1_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1-memif-1-if2} -| | ... | ${dut1-memif-1-if2_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2-memif-1-if1} -| | ... | ${dut2-memif-1-if1_ip6} | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2-memif-1-if2} -| | ... | ${dut2-memif-1-if2_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} +| | VPP Interface Set IP Address | ${dut1} | ${dut1-memif-1-if1} +| | ... | ${dut1-memif-1-if1_ip6} | ${mem_prefix} +| | VPP Interface Set IP Address | ${dut1} | ${dut1-memif-1-if2} +| | ... | ${dut1-memif-1-if2_ip6} | ${mem_prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} +| | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if1} +| | ... | ${dut2-memif-1-if1_ip6} | ${mem_prefix} +| | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if2} +| | ... | ${dut2-memif-1-if2_ip6} | ${mem_prefix} | | Suppress ICMPv6 router advertisement message | ${nodes} -| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} -| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 -| | ... | ${tg1_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 -| | ... | ${tg1_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 | ${tg1_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 | ${tg1_if2_mac} | | ${dut1-memif-1-if2_mac}= | Get Interface MAC | ${dut1} | memif2 | | ${dut2-memif-1-if2_mac}= | Get Interface MAC | ${dut2} | memif2 -| | Add Ip Neighbor | ${dut1} | ${dut1-memif-1-if1} | ${dut1_nh} -| | ... | ${dut1-memif-1-if2_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2-memif-1-if1} | ${dut2_nh} -| | ... | ${dut2-memif-1-if2_mac} -| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix} | ${dut2_if1_ip6} -| | ... | ${dut1_if2} +| | VPP Add IP Neighbor | ${dut1} +| | ... | ${dut1-memif-1-if1} | ${dut1_nh} | ${dut1-memif-1-if2_mac} +| | VPP Add IP Neighbor | ${dut2} +| | ... | ${dut2-memif-1-if1} | ${dut2_nh} | ${dut2-memif-1-if2_mac} +| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix} +| | ... | gateway=${dut2_if1_ip6} | interface=${dut1_if2} | | Vpp Route Add | ${dut1} | ${out_sid2_1} | ${sid_prefix} -| | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1} -| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix} | ${dut1_if2_ip6} -| | ... | ${dut2_if1} +| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1} +| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix} +| | ... | gateway=${dut1_if2_ip6} | interface=${dut2_if1} | | Vpp Route Add | ${dut2} | ${out_sid1_1} | ${sid_prefix} -| | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2} +| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2} # Configure SRv6 for direction0 on DUT1 | | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} | | @{sid_list_dir0}= | Create List | ${dut2_sid1} | ${out_sid1_1} @@ -807,12 +1069,12 @@ | | ... | interfaces. | | ... | | Set interfaces in path up -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 +| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 | | ... | 172.16.0.1 | 172.16.0.2 | | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} @@ -828,22 +1090,22 @@ | | ... | | ... | *Arguments:* | | ... | - dut - DUT node. Type: string -| | ... | - vm_count - VM count. Type: integer +| | ... | - nf_nodes - VM count. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /tmp/sock-\${VM_ID}-1 +| | ... | - /tmp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... | | ... | \| Initialize L2 xconnect with Vhost-User on node \| DUT1 \| 1 \| | | ... -| | [Arguments] | ${dut} | ${vm_count}=${1} +| | [Arguments] | ${dut} | ${nf_nodes}=${1} | | ... -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 +| | | ${sock1}= | Set Variable | /var/run/vpp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /var/run/vpp/sock-${number}-2 | | | ${prev_index}= | Evaluate | ${number}-1 | | | Configure vhost interfaces for L2BD forwarding | ${nodes['${dut}']} | | | ... | ${sock1} | ${sock2} | ${dut}-vhost-${number}-if1 @@ -852,9 +1114,8 @@ | | | ... | ${${dut}-vhost-${prev_index}-if2} | | | Configure L2XC | ${nodes['${dut}']} | ${dut_xconnect_if1} | | | ... | ${${dut}-vhost-${number}-if1} -| | | Run Keyword If | ${number}==${vm_count} | Configure L2XC +| | | Run Keyword If | ${number}==${nf_nodes} | Configure L2XC | | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${number}-if2} | ${${dut}_if2} -| | All VPP Interfaces Ready Wait | ${nodes} | Initialize L2 xconnect with Vhost-User | | [Documentation] @@ -863,18 +1124,18 @@ | | ... | with with physical inteface or Vhost-User interface of another VM. | | ... | | ... | *Arguments:* -| | ... | - vm_count - VM count. Type: integer +| | ... | - nf_nodes - VM count. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Initialize L2 xconnect with Vhost-User \| 1 \| | | ... -| | [Arguments] | ${vm_count}=${1} +| | [Arguments] | ${nf_nodes}=${1} | | ... | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Initialize L2 xconnect with Vhost-User on node | ${dut} -| | | ... | vm_count=${vm_count} +| | | ... | nf_nodes=${nf_nodes} | Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology | | [Documentation] @@ -883,75 +1144,30 @@ | | ... | Setup VLAN between DUTs. All interfaces are brought up. | | ... | | ... | *Arguments:* -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string | | ... | - subid - ID of the sub-interface to be created. Type: string | | ... | - tag_rewrite - Method of tag rewrite. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| L2 xconnect with Vhost-User and VLAN initialized in a 3-node\ -| | ... | circular topology \| /tmp/sock1 \| /tmp/sock2 \| 10 \| pop-1 \| +| | ... | circular topology \| 10 \| pop-1 \| | | ... -| | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} +| | [Arguments] | ${subid} | ${tag_rewrite} | | ... | | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} -| | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} -| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} -| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} - -| Initialize L2 xconnect with Vhost-User and VLAN with DPDK link bonding in 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Setup VLAN -| | ... | on BondEthernet interfaces between DUTs. Cross connect one Vhost -| | ... | interface with physical interface towards TG and other Vhost interface -| | ... | with VLAN sub-interface. All interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 xconnect with Vhost-User and VLAN with DPDK link\ -| | ... | bonding in 3-node circular topology \| /tmp/sock1 \| /tmp/sock2 \ -| | ... | \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} -| | ... -| | Set interfaces in path up -| | Add DPDK bonded ethernet interfaces to topology file in 3-node single link topology -| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology -| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} -| | ... | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} +| | ... | /var/run/vpp/sock-1-1 | /var/run/vpp/sock-1-2 | | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} | | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} +| | ... | /var/run/vpp/sock-1-1 | /var/run/vpp/sock-1-2 | | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} | | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} -| | All VPP Interfaces Ready Wait | ${nodes} | Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology | | [Documentation] @@ -963,8 +1179,6 @@ | | ... | with VLAN sub-interface. All interfaces are brought up. | | ... | | ... | *Arguments:* -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string | | ... | - subid - ID of the sub-interface to be created. Type: string | | ... | - tag_rewrite - Method of tag rewrite. Type: string | | ... | - bond_mode - Link bonding mode. Type: string @@ -973,44 +1187,60 @@ | | ... | *Example:* | | ... | | ... | \| Initialize L2 xconnect with Vhost-User and VLAN with VPP link\ -| | ... | bonding in 3-node circular topology \| /tmp/sock1 \| /tmp/sock2 \ -| | ... | \| 10 \| pop-1 \| \| xor \| l34 \| +| | ... | bonding in 3-node circular topology \| 10 \| pop-1 \| xor \| l34 \| | | ... -| | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | ${bond_mode} -| | ... | ${lb_mode} +| | [Arguments] | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode} | | ... | | Set interfaces in path up | | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut1_if2} +| | Run Keyword If | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} +| | ... | ${dut1_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} | | ... | ${dut1_eth_bond_if1} | | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2_if1} +| | Run Keyword If | '${if1_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ... | ${dut2_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} | | ... | ${dut2_eth_bond_if1} -| | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} +| | ... | ${dut2_eth_bond_if1} +| | VPP Show Bond Data On All Nodes | ${nodes} | verbose=${TRUE} +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} +| | ... | /var/run/vpp/sock-1-1 | /var/run/vpp/sock-1-2 | | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} | | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} +| | ... | /var/run/vpp/sock-1-1 | /var/run/vpp/sock-1-2 | | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} | | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} -| Initialize L2 bridge domain in 2-node circular topology +| Initialize L2 bridge domain in circular topology | | [Documentation] -| | ... | Setup L2 DB topology by adding two interfaces on DUT into BD +| | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD | | ... | that is created automatically with index 1. Learning is enabled. | | ... | Interfaces are brought up. | | ... @@ -1019,66 +1249,53 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 bridge domain in 2-node circular topology \| 1 \| +| | ... | \| Initialize L2 bridge domain in circular topology \| 1 \| | | ... | | [Arguments] | ${bd_id}=${1} | | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... | | Set interfaces in path up +| | ... | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} | | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id} -| Initialize L2 bridge domain in 3-node circular topology +| Configure IPv4 ACLs | | [Documentation] -| | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD -| | ... | that is created automatically with index 1. Learning is enabled. -| | ... | Interfaces are brought up. +| | ... | Configure ACL with required number of not-hitting permit ACEs plus two +| | ... | hitting ACEs for both traffic directions. | | ... | | ... | *Arguments:* -| | ... | - bd_id - Bridge domain ID. Type: integer +| | ... | - dut_node - DUT node. Type: dictionary +| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string +| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 bridge domain in 3-node circular topology \| 1 \| -| | ... -| | [Arguments] | ${bd_id}=${1} -| | ... -| | Set interfaces in path up -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} -| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} -| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id} - -| Configure IPv4 ACLs -| | [Documentation] -| | ... | Configure ACL with required number of not-hitting permit ACEs plus two -| | ... | hitting ACEs for both traffic directions. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - DUT node. Type: dictionary -| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string -| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure IPv4 ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ -| | ... | \| GigabitEthernet0/8/0 \| +| | ... | \| Configure IPv4 ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ +| | ... | \| GigabitEthernet0/8/0 \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${src_ip_start} - Source IP address start. Type: string -| | ... | - ${dst_ip_start} - Destination IP address start. Type: string -| | ... | - ${ip_step} - IP address step. Type: string -| | ... | - ${sport_start} - Source port number start. Type: string -| | ... | - ${dport_start} - Destination port number start. Type: string -| | ... | - ${port_step} - Port number step. Type: string -| | ... | - ${no_hit_aces_number} - Number of not-hitting ACEs to be configured. +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - dst_ip_start - Destination IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - sport_start - Source port number start. Type: string +| | ... | - dport_start - Destination port number start. Type: string +| | ... | - port_step - Port number step. Type: string +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. | | ... | Type: integer -| | ... | - ${acl_apply_type} - To what path apply the ACL - input or output. +| | ... | - acl_apply_type - To what path apply the ACL - input or output. | | ... | Type: string -| | ... | - ${acl_action} - Action for the rule - deny, permit, permit+reflect. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. | | ... | Type: string -| | ... | - ${trex_stream1_subnet} - IP subnet used by T-Rex in direction 0->1. +| | ... | - trex_stream1_subnet - IP subnet used by T-Rex in direction 0->1. | | ... | Type: string -| | ... | - ${trex_stream2_subnet} - IP subnet used by T-Rex in direction 1->0. +| | ... | - trex_stream2_subnet - IP subnet used by T-Rex in direction 1->0. | | ... | Type: string | | ... | | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} @@ -1159,25 +1376,26 @@ | | ... | circular topology \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. | | ... | | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} | | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} | | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} -| Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology +| Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology | | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular -| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP -| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and -| | ... | /30 prefix on DUT1-DUT2 link. Set routing on both DUT nodes with -| | ... | prefix /24 and next hops of neighbour DUT interface IPv4 address. +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. Get the interface MAC addresses and setup ARP on +| | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG +| | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix +| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24 +| | ... | and next hop of neighbour DUT interface IPv4 address. | | ... | Apply required ACL rules to DUT1 interfaces. | | ... | | ... | *Arguments:* @@ -1189,32 +1407,63 @@ | | ... | in 3-node circular topology \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. +| | ... | - tg - TG node. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - tg_if1 - TG interface 1 towards DUT1. +| | ... | - tg_if2 - TG interface 2 towards DUT2 (3-node topo) or DUT1 +| | ... | (2-node topo). +| | ... | - dut1_if1 - DUT1 interface 1 towards TG. +| | ... | - dut1_if2 - DUT1 interface 2 towards DUT2 (3-node topo) or TG +| | ... | (2-node topo). +| | ... | - dut2_if1 - DUT2 interface 1 towards DUT1. +| | ... | - dut2_if2 - DUT2 interface 2 towards TG. +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} | | ... | | Set interfaces in path up +| | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ... | | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2 -| | | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.${number} -| | | ... | ${tg1_if1_mac} -| | | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.${number} -| | | ... | ${tg1_if2_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} +| | | VPP Add IP Neighbor +| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg1_if1_mac} +| | | VPP Add IP Neighbor +| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg1_if2_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} +| | ... | | Configure IP addresses on interfaces | | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24 +| | ... | ${dut} | ${dut_if2} | 20.20.20.1 | 24 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | | ... | ${dut1} | ${dut1_if2} | 1.1.1.1 | 30 | | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30 -| | ... | ${dut2} | ${dut2_if2} | 20.20.20.1 | 24 -| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} -| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2 +| | ... | interface=${dut1_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1 +| | ... | interface=${dut2_if1} +| | ... | | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} | Configure MACIP ACLs @@ -1233,26 +1482,26 @@ | | ... | \| GigabitEthernet0/8/0 \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${src_ip_start} - Source IP address start. Type: string -| | ... | - ${ip_step} - IP address step. Type: string -| | ... | - ${src_mac_start} - Source MAC address start in format with colons. +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - src_mac_start - Source MAC address start in format with colons. | | ... | Type: string -| | ... | - ${src_mac_step} - Source MAC address step. Type: string -| | ... | - ${src_mac_mask} - Source MAC address mask. 00:00:00:00:00:00 is a +| | ... | - src_mac_step - Source MAC address step. Type: string +| | ... | - src_mac_mask - Source MAC address mask. 00:00:00:00:00:00 is a | | ... | wildcard mask. Type: string -| | ... | - ${no_hit_aces_number} - Number of not-hitting ACEs to be configured. +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. | | ... | Type: integer -| | ... | - ${acl_action} - Action for the rule - deny, permit, permit+reflect. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. | | ... | Type: string -| | ... | - ${tg_stream1_subnet} - IP subnet used by TG in direction 0->1. +| | ... | - tg_stream1_subnet - IP subnet used by TG in direction 0->1. | | ... | Type: string -| | ... | - ${tg_stream2_subnet} - IP subnet used by TG in direction 1->0. +| | ... | - tg_stream2_subnet - IP subnet used by TG in direction 1->0. | | ... | Type: string -| | ... | - ${tg_stream1_mac} - Source MAC address of traffic stream 1. +| | ... | - tg_stream1_mac - Source MAC address of traffic stream 1. | | ... | Type: string -| | ... | - ${tg_stream2_mac} - Source MAC address of traffic stream 2. +| | ... | - tg_stream2_mac - Source MAC address of traffic stream 2. | | ... | Type: string -| | ... | - ${tg_mac_mask} - MAC address mask for traffic streams. +| | ... | - tg_mac_mask - MAC address mask for traffic streams. | | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string | | ... | | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} @@ -1323,15 +1572,15 @@ | | ... | circular topology \| | | ... | | ... | _NOTE 1:_ This KW uses following test case variables: -| | ... | - ${tg} - TG node. -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${tg_if1} - TG interface towards DUT1. -| | ... | - ${tg_if2} - TG interface towards DUT2. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. +| | ... | - tg - TG node. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - tg_if1 - TG interface towards DUT1. +| | ... | - tg_if2 - TG interface towards DUT2. +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. | | ... | | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} @@ -1347,58 +1596,87 @@ | | ... | | ... | *Arguments:* | | ... | - dut - DUT node. Type: string -| | ... | - vm_count - VM count. Type: integer +| | ... | - nf_chain - NF chain. Type: integer +| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /var/run/vpp/sock-\${VM_ID}-1 +| | ... | - /var/run/vpp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... | | ... | \| Initialize L2 bridge domains with Vhost-User on node \| DUT1 \ -| | ... | \| 1 \| -| | ... -| | [Arguments] | ${dut} | ${vm_count}=${1} -| | ... -| | ${bd_id2}= | Evaluate | ${vm_count}+1 -| | Add interface to bridge domain | ${nodes['${dut}']} -| | ... | ${${dut}_if1} | ${1} -| | Add interface to bridge domain | ${nodes['${dut}']} -| | ... | ${${dut}_if2} | ${bd_id2} -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | Configure vhost interfaces for L2BD forwarding | ${nodes['${dut}']} -| | | ... | ${sock1} | ${sock2} | ${dut}-vhost-${number}-if1 -| | | ... | ${dut}-vhost-${number}-if2 -| | | ${bd_id2}= | Evaluate | ${number}+1 -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-vhost-${number}-if1} | ${number} -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-vhost-${number}-if2} | ${bd_id2} -| | All VPP Interfaces Ready Wait | ${nodes} +| | ... | \| 1 \| 1 \| +| | ... +| | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1} +| | ... +| | ${bd_id1}= | Evaluate | ${nf_nodes} * (${nf_chain} - 1) + ${nf_chain} +| | ${bd_id2}= | Evaluate | ${nf_nodes} * ${nf_chain} + ${nf_chain} +| | ${dut_str}= | Convert To Lowercase | ${dut} +| | Add interface to bridge domain +| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_1} +| | ... | ${bd_id1} +| | Add interface to bridge domain +| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_2} +| | ... | ${bd_id2} +| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes} + 1 +| | | ${qemu_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node} +| | | Configure vhost interfaces for L2BD forwarding +| | | ... | ${nodes['${dut}']} +| | | ... | /var/run/vpp/sock-${qemu_id}-1 | /var/run/vpp/sock-${qemu_id}-2 +| | | ... | ${dut}-vhost-${qemu_id}-if1 | ${dut}-vhost-${qemu_id}-if2 +| | | ${bd_id1}= | Evaluate | ${qemu_id} + (${nf_chain} - 1) +| | | ${bd_id2}= | Evaluate | ${bd_id1} + 1 +| | | Add interface to bridge domain +| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${qemu_id}-if1} | ${bd_id1} +| | | Add interface to bridge domain +| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${qemu_id}-if2} | ${bd_id2} | Initialize L2 bridge domains with Vhost-User | | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all -| | ... | defined VPP nodes. Add each Vhost-User interface into L2 bridge +| | ... | Create pairs of Vhost-User interfaces for defined number of VNF nodes +| | ... | on all defined VPP nodes. Add each Vhost-User interface into L2 bridge | | ... | domains with learning enabled with physical inteface or Vhost-User | | ... | interface of another VM. | | ... | | ... | *Arguments:* -| | ... | - vm_count - VM count. Type: integer +| | ... | - nf_chain - NF chain. Type: integer +| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 bridge domains with Vhost-User \| 1 \| +| | ... | \| Initialize L2 bridge domains with Vhost-User \| 1 \| 1 \| | | ... -| | [Arguments] | ${vm_count}=${1} +| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | Initialize L2 bridge domains with Vhost-User on node | ${dut} -| | | ... | vm_count=${vm_count} +| | | Initialize L2 bridge domains with Vhost-User on node +| | | ... | ${dut} | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} + +| Initialize L2 bridge domains for multiple chains with Vhost-User +| | [Documentation] +| | ... | Create pairs of Vhost-User interfaces for defined number of NF chains +| | ... | with defined number of VNF nodes on all defined VPP nodes. Add each +| | ... | Vhost-User interface into L2 bridge domains with learning enabled +| | ... | with physical inteface or Vhost-User interface of another VM. +| | ... | Put all interfaces in path up. +| | ... +| | ... | *Arguments:* +| | ... | - nf_chains - Number of chains of NFs. Type: integer +| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 bridge domains for multiple chains with Vhost-User \ +| | ... | \| 1 \| 1 \| +| | ... +| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} +| | ... +| | Set interfaces in path up +| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains} + 1 +| | | Initialize L2 bridge domains with Vhost-User +| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} | Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | [Documentation] @@ -1415,8 +1693,8 @@ | | ... | 24 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 | | ... | 172.16.0.1 | 172.16.0.2 | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 @@ -1424,6 +1702,46 @@ | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} | | Configure L2BD forwarding | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} +| Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology +| | [Documentation] +| | ... | Setup L2 bridge domain topology with VLAN and VXLANoIPv4 by connecting +| | ... | pairs of VLAN sub-interface and VXLAN interface to separate L2 bridge +| | ... | domain on each DUT. All interfaces are brought up. IPv4 addresses +| | ... | with prefix /32 are configured on interfaces between DUTs. VXLAN +| | ... | sub-interfaces has same IPv4 address as interfaces. +| | ... +| | ... | *Arguments:* +| | ... | - vxlan_count - VXLAN count. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node \ +| | ... | \| circular topology \| ${1} \| +| | ... +| | [Arguments] | ${vxlan_count}=${1} +| | ... +| | Set interfaces in path up +| | ... +| | ${bd_id_start}= | Set Variable | ${1} +| | ${vni_start} = | Set Variable | ${20} +| | ... +| | ${ip_step} = | Set Variable | ${2} +| | ${dut1_ip_start}= | Set Variable | 172.16.0.1 +| | ${dut2_ip_start}= | Set Variable | 172.16.0.2 +| | ... +| | Vpp create multiple VXLAN IPv4 tunnels | node=${dut1} +| | ... | node_vxlan_if=${dut1_if2} | node_vlan_if=${dut1_if1} +| | ... | op_node=${dut2} | op_node_if=${dut2_if1} | n_tunnels=${vxlan_count} +| | ... | vni_start=${vni_start} | src_ip_start=${dut1_ip_start} +| | ... | dst_ip_start=${dut2_ip_start} | ip_step=${ip_step} +| | ... | bd_id_start=${bd_id_start} +| | Vpp create multiple VXLAN IPv4 tunnels | node=${dut2} +| | ... | node_vxlan_if=${dut2_if1} | node_vlan_if=${dut2_if2} +| | ... | op_node=${dut1} | op_node_if=${dut1_if2} | n_tunnels=${vxlan_count} +| | ... | vni_start=${vni_start} | src_ip_start=${dut2_ip_start} +| | ... | dst_ip_start=${dut1_ip_start} | ip_step=${ip_step} +| | ... | bd_id_start=${bd_id_start} + | Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | [Documentation] | | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each @@ -1437,15 +1755,13 @@ | | ... | *Arguments:* | | ... | - bd_id1 - Bridge domain ID. Type: integer | | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string -| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| L2 bridge domains with Vhost-User and VXLANoIPv4 initialized in a\ -| | ... | 3-node circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| +| | ... | 3-node circular topology \| 1 \| 2 \| | | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} +| | [Arguments] | ${bd_id1} | ${bd_id2} | | ... | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | | ... | 24 @@ -1457,13 +1773,13 @@ | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 | | ... | 172.16.0.2 | 172.16.0.1 | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} +| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut1} | ${dut1s_vxlan} | ${bd_id2} | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} +| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${bd_id1} | | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} @@ -1510,7 +1826,9 @@ | | ... | ${dut1_vxlans} | ${dut2_vxlans} | ${dut1_route_subnet} | | | ... | ${dut1_route_mask} | ${dut2_route_subnet} | ${dut2_route_mask} | | ... -| | Set interfaces in path up +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | /var/run/vpp/sock-1-${dut1_bd_id1} +| | ... | /var/run/vpp/sock-1-${dut1_bd_id2} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | | | ... | ${dut1_address} | ${dut1_address_subnet} | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | @@ -1528,22 +1846,24 @@ | | | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${dut2_bd_id1} | | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Add arp on dut | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac} | | Vpp Route Add | ${dut1} | ${dut1_route_subnet} | ${dut1_route_mask} -| | ... | ${dut1_gw} | ${dut1_if1} +| | ... | gateway=${dut1_gw} | interface=${dut1_if1} | | Vpp Route Add | ${dut2} | ${dut2_route_subnet} | ${dut2_route_mask} -| | ... | ${dut2_gw} | ${dut2_if2} +| | ... | gateway=${dut2_gw} | interface=${dut2_if2} | | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${dut1_bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${dut2_bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${dut1_bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${dut1_bd_id2} -| Initialize L2 bridge domains with VLAN dot1q sub-interfaces in a 3-node circular topology +| Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology | | [Documentation] -| | ... | Setup L2 bridge domain topology with learning enabled with VLAN -| | ... | between DUTs by connecting physical and vlan interfaces on each DUT. -| | ... | All interfaces are brought up. +| | ... | Setup L2 bridge domain topology with learning enabled with VLAN by +| | ... | connecting physical and vlan interfaces on each DUT. In case of 3-node +| | ... | topology create VLAN sub-interfaces between DUTs. In case of 2-node +| | ... | topology create VLAN sub-interface on dut1-if2 interface. All +| | ... | interfaces are brought up. | | ... | | ... | *Arguments:* | | ... | - bd_id1 - Bridge domain ID. Type: integer @@ -1552,10 +1872,10 @@ | | ... | - tag_rewrite - Method of tag rewrite. Type: string | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. | | ... | | ... | *Example:* | | ... @@ -1564,110 +1884,86 @@ | | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} | | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... | | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} +| | ... | ${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} +| | ... | ${bd_id2} -| Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology +| Initialize L2 bridge domains with Vhost-User and VLAN in circular topology | | [Documentation] | | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each | | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface. -| | ... | Setup VLAN between DUTs. All interfaces are brought up. +| | ... | with physical inteface. In case of 3-node topology create VLAN +| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN +| | ... | sub-interface on dut1-if2 interface. All interfaces are brought up. | | ... | | ... | *Arguments:* | | ... | - bd_id1 - Bridge domain ID. Type: integer | | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string -| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string | | ... | - subid - ID of the sub-interface to be created. Type: string | | ... | - tag_rewrite - Method of tag rewrite. Type: string | | ... | | ... | *Example:* | | ... -| | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in a 3-node\ -| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| 10 \ -| | ... | \| pop-1 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} -| | ... | ${tag_rewrite} -| | ... -| | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} -| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} - -| Initialize L2 bridge domains with Vhost-User and VLAN with DPDK link bonding in a 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Setup VLAN -| | ... | on BondEthernet interfaces between DUTs. Add one Vhost-User interface -| | ... | into L2 bridge domains with learning enabled with physical interface -| | ... | towards TG and other Vhost-User interface into L2 bridge domains with -| | ... | learning enabled with VLAN sub-interface. All interfaces are brought -| | ... | up. +| | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in circular\ +| | ... | topology \| 1 \| 2 \| 10 \| pop-1 \| | | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string -| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} | | ... -| | ... | *Example:* +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} | | ... -| | ... | \| Initialize L2 bridge domains with Vhost-User and VLAN with DPDK\ -| | ... | link bonding in a 3-node circular topology \| 1 \| 2 \| /tmp/sock1 \ -| | ... | \| /tmp/sock2 \| 10 \| pop-1 \| +| | Set interfaces in path up | | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} -| | ... | ${tag_rewrite} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} | | ... -| | Set interfaces in path up -| | Add DPDK bonded ethernet interfaces to topology file in 3-node single link topology -| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology -| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} -| | ... | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} +| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} -| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} +| | ... | ${bd_id1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} | Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology | | [Documentation] @@ -1683,8 +1979,6 @@ | | ... | *Arguments:* | | ... | - bd_id1 - Bridge domain ID. Type: integer | | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string -| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string | | ... | - subid - ID of the sub-interface to be created. Type: string | | ... | - tag_rewrite - Method of tag rewrite. Type: string | | ... | - bond_mode - Link bonding mode. Type: string @@ -1693,459 +1987,73 @@ | | ... | *Example:* | | ... | | ... | \| Initialize L2 bridge domains with Vhost-User and VLAN with VPP\ -| | ... | link bonding in a 3-node circular topology \| 1 \| 2 \| /tmp/sock1 \ -| | ... | \| /tmp/sock2 \| 10 \| pop-1 \| xor \| l34 \| +| | ... | link bonding in a 3-node circular topology \| 1 \| 2 \ +| | ... | \| 10 \| pop-1 \| xor \| l34 \| | | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} -| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode} +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} +| | ... | ${bond_mode} | ${lb_mode} | | ... | | Set interfaces in path up | | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut1_if2} +| | Run Keyword If | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} +| | ... | ${dut1_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} | | ... | ${dut1_eth_bond_if1} | | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up | | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2_if1} +| | Run Keyword If | '${if1_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} | | ... | ${dut2_eth_bond_if1} -| | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} +| | ... | ${dut2_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} +| | ... | ${dut2_eth_bond_if1} +| | VPP Show Bond Data On All Nodes | ${nodes} | verbose=${TRUE} +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} +| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | ${sock1} | ${sock2} +| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} | | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} | | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} | | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| Add PCI devices to all DUTs -| | [Documentation] -| | ... | Add PCI devices to VPP configuration file. -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} -| | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} -| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} | ${if2_pci} -| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} -| | | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} - -| Add single PCI device to all DUTs -| | [Documentation] -| | ... | Add single (first) PCI device on DUT1 and single (last) PCI device on -| | ... | DUT2 to VPP configuration file. -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | ${if1_pci}= | Run Keyword If | '${dut}' == 'DUT1' | Get Interface PCI Addr -| | | ... | ${nodes['${dut}']} | ${${dut}_if1} | ELSE | Get Interface PCI Addr -| | | ... | ${nodes['${dut}']} | ${${dut}_if2} -| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} -| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} - -| Add VLAN Strip Offload switch off between DUTs in 3-node single link topology -| | [Documentation] -| | ... | Add VLAN Strip Offload switch off on PCI devices between DUTs to VPP -| | ... | configuration file. -| | ... -| | Run keyword | DUT1.Add DPDK Dev Parameter | ${dut1_if2_pci} -| | ... | vlan-strip-offload | off -| | Run keyword | DUT2.Add DPDK Dev Parameter | ${dut2_if1_pci} -| | ... | vlan-strip-offload | off - -| Add DPDK bonded ethernet interfaces to DUTs in 3-node single link topology -| | [Documentation] -| | ... | Add DPDK bonded Ethernet interfaces with mode XOR and transmit policy -| | ... | l34 to VPP configuration file. -| | ... -| | Run keyword | DUT1.Add DPDK Eth Bond Dev | 0 | 2 | l34 | ${dut1_if2_pci} -| | Run keyword | DUT2.Add DPDK Eth Bond Dev | 0 | 2 | l34 | ${dut2_if1_pci} - -| Add DPDK bonded ethernet interfaces to topology file in 3-node single link topology -| | Add Bond Eth Interface | ${dut1} | ${dut1_eth_bond_if1_name} -| | Add Bond Eth Interface | ${dut2} | ${dut2_eth_bond_if1_name} - -| Configure guest VM with dpdk-testpmd connected via vhost-user -| | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting\ -| | ... | DPDK testpmd. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. -| | ... | Type: string -| | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT -| | ... | node. Type: integer -| | ... | - jumbo - Set True if jumbo frames are used in the test. -| | ... | Type: bool -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | *Note:* -| | ... | KW uses test variables \${rxq_count_int}, \${thr_count_int} and -| | ... | \${cpu_count_int} set by "Add worker threads and rxqueues to all DUTs" -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VM with dpdk-testpmd connected via vhost-user \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock-2-1 \| /tmp/sock-2-2 \| DUT1_VM2 \ -| | ... | \| qemu_id=${2} \| -| | ... -| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} | ${qemu_id}=${1} -| | ... | ${jumbo}=${False} | ${perf_qemu_qsz}=${256} -| | ... | ${use_tuned_cfs}=${False} -| | ... -| | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id} -| | ... | WITH NAME | ${vm_name} -| | Run keyword | ${vm_name}.Qemu Set Node | ${nodes['${dut}']} -| | ${serial_port}= | Evaluate | ${qemu_id} + ${4555} -| | Run keyword | ${vm_name}.Qemu Set Serial Port | ${serial_port} -| | ${ssh_fwd_port}= | Evaluate | ${qemu_id} + ${10021} -| | Run keyword | ${vm_name}.Qemu Set Ssh Fwd Port | ${ssh_fwd_port} -| | ${dut_numa}= | Get interfaces numa node | ${nodes['${dut}']} -| | ... | ${${dut}_if1} | ${${dut}_if2} -# Compute CPU placement for VM based on expected DUT placement. -| | ${os_cpus}= | Set Variable | ${1} -| | ${dut_main_cpus}= | Set Variable | ${1} -| | ${dut_wk_cpus}= | Set Variable | ${cpu_count_int} -| | ${vm_cpus}= | Evaluate | ${dut_wk_cpus} + ${dut_main_cpus} -| | ${skip_dut}= | Evaluate | ${dut_wk_cpus} + ${dut_main_cpus} + ${os_cpus} -| | ${skip_cpu}= | Evaluate | ${skip_dut} + (${qemu_id} - ${1}) * ${vm_cpus} -| | ${qemu_cpus}= | Cpu slice of list per node | ${nodes['${dut}']} -| | ... | ${dut_numa} | skip_cnt=${skip_cpu} | cpu_cnt=${vm_cpus} -| | ... | smt_used=${smt_used} -| | ${vm_thrs}= | Get Length | ${qemu_cpus} -| | Run keyword | ${vm_name}.Qemu Set Queue Count | ${rxq_count_int} -| | Run keyword | ${vm_name}.Qemu Set Queue Size | ${perf_qemu_qsz} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | ... | jumbo_frames=${jumbo} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ... | jumbo_frames=${jumbo} -| | ${apply_patch}= | Set Variable | ${False} -| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} -| | ... | ${perf_qemu_path}-patch/bin/ -| | ... | ${perf_qemu_path}-base/bin/ -| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${nodes['${dut}']} -| | ... | apply_patch=${False} -| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} -| | Run keyword | ${vm_name}.Qemu Set Smp | ${vm_thrs} | ${vm_thrs} | 1 | 1 -| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 -| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} -| | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} -| | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy -| | ${max_pkt_len}= | Set Variable If | ${jumbo} | 9000 | ${EMPTY} -| | ${testpmd_cpus}= | Evaluate | ${thr_count_int} + ${1} -| | ${testpmd_cpus}= | Cpu list per node str | ${nodes['${dut}']} | ${0} -| | ... | cpu_cnt=${testpmd_cpus} -| | Dpdk Testpmd Start | ${vm} | eal_corelist=${testpmd_cpus} -| | ... | eal_mem_channels=4 | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE} -| | ... | pmd_rxd=${perf_qemu_qsz} | pmd_txd=${perf_qemu_qsz} -| | ... | pmd_rxq=${rxq_count_int} | pmd_txq=${rxq_count_int} -| | ... | pmd_max_pkt_len=${max_pkt_len} -| | Return From Keyword | ${vm} - -| Configure guest VMs with dpdk-testpmd connected via vhost-user on node -| | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ -| | ... | interconnecting DPDK testpmd for defined number of VMs on all defined\ -| | ... | VPP nodes. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node to start guest VM on. Type: dictionary -| | ... | - vm_count - Number of guest VMs. Type: int -| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) -| | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VMs with dpdk-testpmd connected via \ -| | ... | vhost-user on node \| DUT1 \| 1 \| False \| 256 \| -| | ... -| | [Arguments] | ${dut} | ${vm_count}=${1} | ${jumbo}=${False} | -| | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False} -| | ... -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | ${vm}= -| | | ... | Configure guest VM with dpdk-testpmd connected via vhost-user -| | | ... | ${dut} | ${sock1} | ${sock2} | ${dut}_VM${number} -| | | ... | qemu_id=${number} | jumbo=${jumbo} | perf_qemu_qsz=${perf_qemu_qsz} -| | | ... | use_tuned_cfs=${use_tuned_cfs} -| | | Set To Dictionary | ${${dut}_vm_refs} | ${dut}_VM${number} | ${vm} - -| Configure guest VMs with dpdk-testpmd connected via vhost-user -| | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ -| | ... | interconnecting DPDK testpmd defined number of VMs on all defined VPP\ -| | ... | nodes. -| | ... -| | ... | *Arguments:* -| | ... | - vm_count - Number of guest VMs. Type: int -| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) -| | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VMs with dpdk-testpmd connected via vhost-user\ -| | ... | \| 1 \| False \| 256 \| -| | ... -| | [Arguments] | ${vm_count}=${1} | ${jumbo}=${False} | ${perf_qemu_qsz}=${256} -| | ... | ${use_tuned_cfs}=${False} -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Configure guest VMs with dpdk-testpmd connected via vhost-user on node -| | | ... | ${dut} | vm_count=${vm_count} | jumbo=${jumbo} -| | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${False} - -| Configure guest VM with dpdk-testpmd-mac connected via vhost-user -| | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting\ -| | ... | DPDK testpmd. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. -| | ... | Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. -| | ... | Type: string -| | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - eth0_mac - MAC address of first Vhost interface. Type: string -| | ... | - eth1_mac - MAC address of second Vhost interface. Type: string -| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT -| | ... | node. Type: integer -| | ... | - jumbo - Set True if jumbo frames are used in the test. -| | ... | Type: bool -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | *Note:* -| | ... | KW uses test variables \${rxq_count_int}, \${thr_count_int} and -| | ... | \${cpu_count_int} set by "Add worker threads and rxqueues to all DUTs" -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VM with dpdk-testpmd-mac connected via vhost-user \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ -| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| -| | ... -| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} -| | ... | ${eth0_mac} | ${eth1_mac} | ${qemu_id}=${1} | ${jumbo}=${False} -| | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False} -| | ... -| | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id} -| | ... | WITH NAME | ${vm_name} -| | Run keyword | ${vm_name}.Qemu Set Node | ${nodes['${dut}']} -| | ${serial_port}= | Evaluate | ${qemu_id} + ${4555} -| | Run keyword | ${vm_name}.Qemu Set Serial Port | ${serial_port} -| | ${ssh_fwd_port}= | Evaluate | ${qemu_id} + ${10021} -| | Run keyword | ${vm_name}.Qemu Set Ssh Fwd Port | ${ssh_fwd_port} -| | ${dut_numa}= | Get interfaces numa node | ${nodes['${dut}']} -| | ... | ${${dut}_if1} | ${${dut}_if2} -# Compute CPU placement for VM based on expected DUT placement. -| | ${os_cpus}= | Set Variable | ${1} -| | ${dut_main_cpus}= | Set Variable | ${1} -| | ${dut_wk_cpus}= | Set Variable | ${cpu_count_int} -| | ${vm_cpus}= | Evaluate | ${dut_wk_cpus} + ${dut_main_cpus} -| | ${skip_dut}= | Evaluate | ${dut_wk_cpus} + ${dut_main_cpus} + ${os_cpus} -| | ${skip_cpu}= | Evaluate | ${skip_dut} + (${qemu_id} - ${1}) * ${vm_cpus} -| | ${qemu_cpus}= | Cpu slice of list per node | ${nodes['${dut}']} -| | ... | ${dut_numa} | skip_cnt=${skip_cpu} | cpu_cnt=${vm_cpus} -| | ... | smt_used=${smt_used} -| | ${vm_thrs}= | Get Length | ${qemu_cpus} -| | Run keyword | ${vm_name}.Qemu Set Queue Count | ${rxq_count_int} -| | Run keyword | ${vm_name}.Qemu Set Queue Size | ${perf_qemu_qsz} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | ... | jumbo_frames=${jumbo} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ... | jumbo_frames=${jumbo} -| | ${apply_patch}= | Set Variable | ${False} -| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} -| | ... | ${perf_qemu_path}-patch/bin/ -| | ... | ${perf_qemu_path}-base/bin/ -| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${nodes['${dut}']} -| | ... | apply_patch=${False} -| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} -| | Run keyword | ${vm_name}.Qemu Set Smp | ${vm_thrs} | ${vm_thrs} | 1 | 1 -| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 -| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} -| | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} -| | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy -| | ${max_pkt_len}= | Set Variable If | ${jumbo} | 9000 | ${EMPTY} -| | ${testpmd_cpus}= | Evaluate | ${thr_count_int} + ${1} -| | ${testpmd_cpus}= | Cpu list per node str | ${nodes['${dut}']} | ${0} -| | ... | cpu_cnt=${testpmd_cpus} -| | Dpdk Testpmd Start | ${vm} | eal_corelist=${testpmd_cpus} -| | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} -| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${TRUE} -| | ... | pmd_rxd=${perf_qemu_qsz} | pmd_txd=${perf_qemu_qsz} -| | ... | pmd_rxq=${rxq_count_int} | pmd_txq=${rxq_count_int} -| | ... | pmd_max_pkt_len=${max_pkt_len} -| | Return From Keyword | ${vm} - -| Configure guest VMs with dpdk-testpmd-mac connected via vhost-user on node -| | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ -| | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ -| | ... | defined number of VMs on all defined VPP nodes. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node to start guest VM on. Type: dictionary -| | ... | - vm_count} - Number of guest VMs. Type: int -| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) -| | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | _NOTE:_ This KW expects following test case variables to be set: -| | ... | - cpu_count_int - Number of Physical CPUs allocated for DUT. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VMs with dpdk-testpmd-mac connected via \ -| | ... | vhost-user on node \| DUT1 \| 1 \| False \| 256 \| -| | ... -| | [Arguments] | ${dut} | ${vm_count}=${1} | ${jumbo}=${False} | -| | ... | ${perf_qemu_qsz}=${256} | ${use_tuned_cfs}=${False} -| | ... -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | ${vm}= -| | | ... | Configure guest VM with dpdk-testpmd-mac connected via vhost-user -| | | ... | ${dut} | ${sock1} | ${sock2} | ${dut}_VM${number} -| | | ... | ${${dut}-vhost-${number}-if1_mac} -| | | ... | ${${dut}-vhost-${number}-if2_mac} | qemu_id=${number} -| | | ... | jumbo=${jumbo} | perf_qemu_qsz=${perf_qemu_qsz} -| | | ... | use_tuned_cfs=${use_tuned_cfs} -| | | Set To Dictionary | ${${dut}_vm_refs} | ${dut}_VM${number} | ${vm} - -| Configure guest VMs with dpdk-testpmd-mac connected via vhost-user -| | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ -| | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ -| | ... | defined number of VMs on all defined VPP nodes. -| | ... -| | ... | *Arguments:* -| | ... | - vm_count - Number of guest VMs. Type: int -| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) -| | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VMs with dpdk-testpmd-mac connected via vhost-user\ -| | ... | \| 1 \| False \| 256 \| -| | ... -| | [Arguments] | ${vm_count}=${1} | ${jumbo}=${False} | ${perf_qemu_qsz}=${256} -| | ... | ${use_tuned_cfs}=${False} -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Configure guest VMs with dpdk-testpmd-mac connected via vhost-user on node -| | | ... | ${dut} | vm_count=${vm_count} | jumbo=${jumbo} -| | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${False} - -| Configure guest VM with linux bridge connected via vhost-user -| | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting\ -| | ... | linux bridge. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. -| | ... | Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. -| | ... | Type: string -| | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - skip_cnt - number of cpus which will be skipped. Type: int -| | ... -| | ... | _NOTE:_ This KW expects following test case variables to be set: -| | ... | - cpu_count_int - Number of Physical CPUs allocated for DUT. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VM with linux bridge connected via vhost-user \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \| ${6} \| -| | ... -| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} | ${skip_cnt}=${6} -| | ... | ${count}=${5} -| | ... -| | Import Library | resources.libraries.python.QemuUtils -| | ... | WITH NAME | ${vm_name} -| | Run keyword | ${vm_name}.Qemu Set Node | ${dut} -| | ${dut_numa}= | Get interfaces numa node | ${dut} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${vm_phy_cpus}= | Evaluate | ${cpu_count_int} + ${1} -| | ${skip_cnt}= | Evaluate | ${skip} + (${qemu_id} - ${1}) * ${vm_phy_cpus} -| | ${qemu_cpus}= | Cpu slice of list per node | ${dut} | ${dut_numa} -| | ... | skip_cnt=${skip_cnt} | cpu_cnt=${vm_phy_cpus} | smt_used=${smt_used} -| | ${vm_thr_cpus}= | Get Length | ${qemu_cpus} -| | Run keyword | ${vm_name}.Qemu Set Queue Size | ${perf_qemu_qsz} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ${apply_patch}= | Set Variable | ${False} -| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} -| | ... | ${perf_qemu_path}-patch/bin/ -| | ... | ${perf_qemu_path}-base/bin/ -| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut} -| | ... | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} -| | Run keyword | ${vm_name}.Qemu Set Smp | ${vm_thr_cpus} | ${vm_thr_cpus} -| | ... | 1 | 1 -| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 -| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image} -| | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} -| | ${br}= | Set Variable | br0 -| | ${vhost1}= | Get Vhost User If Name By Sock | ${vm} | ${sock1} -| | ${vhost2}= | Get Vhost User If Name By Sock | ${vm} | ${sock2} -| | Linux Add Bridge | ${vm} | ${br} | ${vhost1} | ${vhost2} -| | Set Interface State | ${vm} | ${vhost1} | up | if_type=name -| | Set Interface State | ${vm} | ${vhost2} | up | if_type=name -| | Set Interface State | ${vm} | ${br} | up | if_type=name -| | Return From Keyword | ${vm} - | Initialize LISP IPv4 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${dut2_dut1_address} - Ip address from DUT2 to DUT1. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${duts_prefix} - ip prefix. Type: int +| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - duts_prefix - ip prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2163,12 +2071,12 @@ | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} -| | ... | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} -| | ... | ${dut1_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} | ${dut1_if2_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | | ... | ${dut1_tg_address} | ${duts_prefix} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} @@ -2182,8 +2090,8 @@ | | [Documentation] | Setup Lisp GPE IPv4 forwarding over IPsec. | | ... | | ... | *Arguments:* -| | ... | -${encr_alg} - Encryption algorithm. Type: string -| | ... | -${auth_alg} - Authentication algorithm. Type: string +| | ... | - encr_alg - Encryption algorithm. Type: string +| | ... | - auth_alg - Authentication algorithm. Type: string | | ... | | ... | *Return:* | | ... | - No value returned @@ -2217,11 +2125,11 @@ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${dut2_dut1_address} - Ip address from DUT2 to DUT1. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${duts_prefix} - ip prefix. Type: int +| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - duts_prefix - ip prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2239,35 +2147,35 @@ | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_tg_address} -| | ... | ${prefix} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_dut2_address} -| | ... | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_dut1_address} -| | ... | ${prefix} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_tg_address} -| | ... | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut1_tg_address} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut1_dut2_address} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_address} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_address} | ${prefix} | | Suppress ICMPv6 router advertisement message | ${nodes} -| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} -| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} -| | ... | ${dut2_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} -| | ... | ${dut1_if2_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} | ${dut1_if2_mac} | Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | - ${dut1_dut2_ip6_address} - IPv6 address from DUT1 to DUT2. +| | ... | - dut1_dut2_ip6_address - IPv6 address from DUT1 to DUT2. | | ... | Type: string -| | ... | - ${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string -| | ... | - ${dut2_dut1_ip6_address} - IPv6 address from DUT2 to DUT1. +| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_ip6_address - IPv6 address from DUT2 to DUT1. | | ... | Type: string -| | ... | - ${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string -| | ... | - ${prefix4} - IPv4 prefix. Type: int -| | ... | - ${prefix6} - IPv6 prefix. Type: int +| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string +| | ... | - prefix4 - IPv4 prefix. Type: int +| | ... | - prefix6 - IPv6 prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2289,33 +2197,33 @@ | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | | ... | ${dut1_tg_ip4_address} | ${prefix4} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_dut2_ip6_address} -| | ... | ${prefix6} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip6_address} -| | ... | ${prefix6} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut1_dut2_ip6_address} | ${prefix6} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip6_address} | ${prefix6} | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | | ... | ${dut2_tg_ip4_address} | ${prefix4} | | Suppress ICMPv6 router advertisement message | ${nodes} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} -| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip6_address} -| | ... | ${dut2_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip6_address} -| | ... | ${dut1_if2_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip6_address} | ${dut2_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip6_address} | ${dut1_if2_mac} | Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | - ${dut1_dut2_ip4_address} - IPv4 address from DUT1 to DUT2. +| | ... | - dut1_dut2_ip4_address - IPv4 address from DUT1 to DUT2. | | ... | Type: string -| | ... | - ${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string -| | ... | - ${dut2_dut1_ip4_address} - IPv4 address from DUT2 to DUT1. +| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_ip4_address - IPv4 address from DUT2 to DUT1. | | ... | Type: string -| | ... | - ${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string -| | ... | - ${prefix4} - IPv4 prefix. Type: int -| | ... | - ${prefix6} - IPv6 prefix. Type: int +| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string +| | ... | - prefix4 - IPv4 prefix. Type: int +| | ... | - prefix6 - IPv6 prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2335,51 +2243,78 @@ | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_tg_ip6_address} -| | ... | ${prefix6} -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} -| | ... | ${dut1_dut2_ip4_address} | ${prefix4} -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} -| | ... | ${dut2_dut1_ip4_address} | ${prefix4} -| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_tg_ip6_address} -| | ... | ${prefix6} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut1_tg_ip6_address} | ${prefix6} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut1_dut2_ip4_address} | ${prefix4} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip4_address} | ${prefix4} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_ip6_address} | ${prefix6} | | Suppress ICMPv6 router advertisement message | ${nodes} -| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} -| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip4_address} -| | ... | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip4_address} -| | ... | ${dut1_if2_mac} - -| Initialize NAT44 in 3-node circular topology -| | [Documentation] | Initialization of 3-node topology with NAT44 between DUTs: +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip4_address} | ${dut2_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip4_address} | ${dut1_if2_mac} + +| Initialize NAT44 in circular topology +| | [Documentation] | Initialization of 2-node / 3-node topology with NAT44 +| | ... | between DUTs: | | ... | - set interfaces up | | ... | - set IP addresses | | ... | - set ARP | | ... | - create routes | | ... | - set NAT44 - only on DUT1 | | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... | | Set interfaces in path up | | ... | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 11.0.0.1 | 20 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 11.0.0.2 | 20 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | 12.0.0.1 | 20 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} +| | ... | 11.0.0.1 | 20 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} +| | ... | 11.0.0.2 | 20 +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} +| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 12.0.0.1 | 20 | | ... | | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | ... -| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 11.0.0.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | 11.0.0.1 | ${dut1_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | 12.0.0.2 | ${tg_if2_mac} -| | ... -| | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | 11.0.0.2 | ${dut1_if2} -| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | 10.0.0.2 | ${dut1_if1} -| | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | 12.0.0.2 | ${dut2_if2} -| | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | 11.0.0.1 | ${dut2_if1} +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ... +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | 11.0.0.2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | 11.0.0.1 | ${dut1_if2_mac} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 12.0.0.2 | ${tg_if2_mac} +| | ... +| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | gateway=10.0.0.2 +| | ... | interface=${dut1_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | gateway=11.0.0.2 +| | ... | interface=${dut1_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | gateway=12.0.0.2 +| | ... | interface=${dut2_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | gateway=11.0.0.1 +| | ... | interface=${dut2_if1} | | ... | | Configure inside and outside interfaces | | ... | ${dut1} | ${dut1_if1} | ${dut1_if2} @@ -2393,14 +2328,14 @@ | | ... | a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${dut} - DUT node. Type: dictionary -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - dut - DUT node. Type: dictionary +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} +| | ... | - /tmp/memif-\${dut}_CNF\${number}-\${sid} | | ... -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | KW uses test variable \${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs | | ... | | ... | *Example:* @@ -2411,8 +2346,8 @@ | | [Arguments] | ${dut} | ${count} | | ... | | :FOR | ${number} | IN RANGE | 1 | ${count}+1 -| | | ${sock1}= | Set Variable | memif-${dut}_VNF -| | | ${sock2}= | Set Variable | memif-${dut}_VNF +| | | ${sock1}= | Set Variable | memif-${dut}_CNF +| | | ${sock2}= | Set Variable | memif-${dut}_CNF | | | ${prev_index}= | Evaluate | ${number}-1 | | | Set up memif interfaces on DUT node | ${nodes['${dut}']} | | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1 @@ -2431,7 +2366,7 @@ | | ... | interface to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Example:* | | ... @@ -2444,43 +2379,52 @@ | | | Initialize L2 xconnect with memif pairs on DUT node | ${dut} | ${count} | | Set interfaces in path up | | Show Memif on all DUTs | ${nodes} +| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif | Initialize L2 Bridge Domain with memif pairs on DUT node | | [Documentation] | | ... | Create pairs of Memif interfaces on DUT node. Put each Memif interface -| | ... | to separate L2 bridge domain with one physical or virtual interface +| | ... | to separate L2 bridge domain with one physical or memif interface | | ... | to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${dut} - DUT node. Type: dictionary -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - dut - DUT node. Type: dictionary +| | ... | - nf_chain - NF chain. Type: integer +| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer +| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface +| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} +| | ... | - /tmp/memif-\${dut}_CNF\${nf_id}-\${sid} | | ... | | ... | *Example:* | | ... | | ... | \| Initialize L2 Bridge Domain with memif pairs on DUT node \ -| | ... | \| ${dut} \| ${1} \| +| | ... | \| ${dut} \| 1 \| 1 \| | | ... -| | [Arguments] | ${dut} | ${count} +| | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1} +| | ... | ${auto_scale}=${True} | | ... -| | ${bd_id2}= | Evaluate | ${count}+1 +| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True} +| | ... | Set Variable | ${rxq_count_int} +| | ... | ELSE | Set Variable | ${1} +| | ${bd_id2}= | Evaluate | ${nf_nodes}+1 | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1} | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} | | ... | ${bd_id2} -| | :FOR | ${number} | IN RANGE | 1 | ${count}+1 -| | | ${sock1}= | Set Variable | memif-${dut}_VNF -| | | ${sock2}= | Set Variable | memif-${dut}_VNF +| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes}+1 +| | | ${nf_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node} +| | | ${sock1}= | Set Variable | memif-${dut}_CNF +| | | ${sock2}= | Set Variable | memif-${dut}_CNF | | | Set up memif interfaces on DUT node | ${nodes['${dut}']} -| | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1 -| | | ... | ${dut}-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} -| | | ${bd_id2}= | Evaluate | ${number}+1 +| | | ... | ${sock1} | ${sock2} | ${nf_id} | ${dut}-memif-${nf_id}-if1 +| | | ... | ${dut}-memif-${nf_id}-if2 | ${rxq} | ${rxq} +| | | ${bd_id2}= | Evaluate | ${nf_node}+1 | | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${number}-if1} | ${number} +| | | ... | ${${dut}-memif-${nf_id}-if1} | ${nf_node} | | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${number}-if2} | ${bd_id2} +| | | ... | ${${dut}-memif-${nf_id}-if2} | ${bd_id2} | Initialize L2 Bridge Domain with memif pairs | | [Documentation] @@ -2489,20 +2433,339 @@ | | ... | virtual interface to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - nf_chain - NF chain. Type: integer +| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer +| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface +| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 Bridge Domain with memif pairs \| ${1} \| +| | ... | \| Initialize L2 Bridge Domain with memif pairs \| 1 \| 1 \| | | ... -| | [Arguments] | ${count}=${1} +| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} | | ... | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Initialize L2 Bridge Domain with memif pairs on DUT node | ${dut} -| | | ... | ${count} +| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} +| | | ... | auto_scale=${auto_scale} + +| Initialize L2 Bridge Domain for multiple chains with memif pairs +| | [Documentation] +| | ... | Create pairs of Memif interfaces for defined number of NF chains +| | ... | with defined number of NF nodes on all defined VPP nodes. Add each +| | ... | Memif interface into L2 bridge domains with learning enabled +| | ... | with physical inteface or Memif interface of another NF. +| | ... +| | ... | *Arguments:* +| | ... | - nf_chains - Number of chains of NFs. Type: integer +| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer +| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface +| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 Bridge Domain for multiple chains with memif pairs \ +| | ... | \| 1 \| 1 \| +| | ... +| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} +| | ... +| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1 +| | | Initialize L2 Bridge Domain with memif pairs | nf_chain=${nf_chain} +| | | ... | nf_nodes=${nf_nodes} | auto_scale=${auto_scale} +| | Set interfaces in path up +| | Show Memif on all DUTs | ${nodes} +| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif + +| Initialize L2 Bridge Domain for pipeline with memif pairs +| | [Documentation] +| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each +| | ... | Memif interface to separate L2 bridge domain with one physical or +| | ... | virtual interface to create a service pipeline on DUT node. +| | ... +| | ... | *Arguments:* +| | ... | - nf_chain - NF pipe. Type: integer +| | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer +| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface +| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 Bridge Domain for pipeline with memif pairs \ +| | ... | \| 1 \| 1 \| +| | ... +| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} +| | ... +| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True} +| | ... | Set Variable | ${rxq_count_int} +| | ... | ELSE | Set Variable | ${1} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1} +| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} | ${2} +| | | ${nf_id_frst}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${1} +| | | ${nf_id_last}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${nf_nodes} +| | | ${sid_frst}= | Evaluate | ${nf_id_frst} * ${2} - ${1} +| | | ${sid_last}= | Evaluate | ${nf_id_last} * ${2} +| | | Set up single memif interface on DUT node | ${nodes['${dut}']} +| | | ... | memif-${dut}_CNF | mid=${nf_id_frst} | sid=${sid_frst} +| | | ... | memif_if=${dut}-memif-${nf_id_frst}-if1 +| | | ... | rxq=${rxq} | txq=${rxq} +| | | Set up single memif interface on DUT node | ${nodes['${dut}']} +| | | ... | memif-${dut}_CNF | mid=${nf_id_last} | sid=${sid_last} +| | | ... | memif_if=${dut}-memif-${nf_id_last}-if2 +| | | ... | rxq=${rxq} | txq=${rxq} +| | | Add interface to bridge domain | ${nodes['${dut}']} +| | | ... | ${${dut}-memif-${nf_id_frst}-if1} | ${1} +| | | Add interface to bridge domain | ${nodes['${dut}']} +| | | ... | ${${dut}-memif-${nf_id_last}-if2} | ${2} + +| Initialize L2 Bridge Domain for multiple pipelines with memif pairs +| | [Documentation] +| | ... | Create pairs of Memif interfaces for defined number of NF pipelines +| | ... | with defined number of NF nodes on all defined VPP nodes. Add each +| | ... | Memif interface into L2 bridge domains with learning enabled +| | ... | with physical inteface or Memif interface of another NF. +| | ... +| | ... | *Arguments:* +| | ... | - nf_chains - Number of pipelines of NFs. Type: integer +| | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer +| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface +| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 Bridge Domain for multiple pipelines with memif \ +| | ... | pairs \| 1 \| 1 \| +| | ... +| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} +| | ... +| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1 +| | | Initialize L2 Bridge Domain for pipeline with memif pairs +| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} +| | | ... | auto_scale=${auto_scale} +| | Set interfaces in path up +| | Show Memif on all DUTs | ${nodes} +| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif + +| Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology +| | [Documentation] +| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each +| | ... | Memif interface to separate L2 bridge domain with one physical or +| | ... | virtual interface to create a chain accross DUT node. In case of +| | ... | 3-node topology create VLAN sub-interfaces between DUTs. In case of +| | ... | 2-node topology create VLAN sub-interface on dut1-if2 interface. All +| | ... | interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id1 - Bridge domain ID. Type: integer +| | ... | - bd_id2 - Bridge domain ID. Type: integer +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 Bridge Domain with memif pairs and VLAN in circular\ +| | ... | topology \| 1 \| 2 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... +| | Set interfaces in path up +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... +| | ${number}= | Set Variable | ${1} +| | ${sock1}= | Set Variable | memif-DUT1_CNF +| | ${sock2}= | Set Variable | memif-DUT1_CNF +| | ${memif_if1_name}= | Set Variable | DUT1-memif-${number}-if1 +| | ${memif_if2_name}= | Set Variable | DUT1-memif-${number}-if2 +| | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock2} +| | ... | ${number} | ${memif_if1_name} | ${memif_if2_name} | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${${memif_if1_name}} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${${memif_if2_name}} | ${bd_id2} +| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} +| | ${sock1}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | memif-DUT2_CNF +| | ${sock2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | memif-DUT2_CNF +| | ${memif_if1_name}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | DUT2-memif-${number}-if1 +| | ${memif_if2_name}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | DUT2-memif-${number}-if2 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set up memif interfaces on DUT node | ${dut2} | ${sock1} | ${sock2} +| | ... | ${number} | ${memif_if1_name} | ${memif_if2_name} | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} +| | ... | ${bd_id1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${${memif_if1_name}} +| | ... | ${bd_id1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${${memif_if2_name}} +| | ... | ${bd_id2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| | ... +| | Show Memif on all DUTs | ${nodes} +| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif + +| Initialize IPv4 routing with memif pairs on DUT node +| | [Documentation] +| | ... | Create pairs of Memif interfaces on DUT node. Put each Memif interface +| | ... | to separate IPv4 VRF with one physical or virtual interface +| | ... | to create a chain accross DUT node. +| | ... +| | ... | *Arguments:* +| | ... | - dut - DUT node. Type: dictionary +| | ... | - count - Number of memif pairs (containers). Type: integer +| | ... +| | ... | *Note:* +| | ... | Socket paths for Memif are defined in following format: +| | ... | - /tmp/memif-\${dut}_CNF\${number}-\${sid} +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv4 routing with memif pairs on DUT node \ +| | ... | \| ${dut} \| ${1} \| +| | ... +| | [Arguments] | ${dut} | ${count} +| | ... +| | ${dut_index}= | Get Index From List | ${duts} | ${dut} +| | ${last_dut_index}= | Evaluate | ${duts_count} - ${1} +| | ... +| | ${tg_if1_net}= | Set Variable | 10.10.10.0 +| | ${tg_if2_net}= | Set Variable | 20.20.20.0 +| | ... +| | ${fib_table_1}= | Set Variable | ${10} +| | Run Keyword If | ${fib_table_1} > ${0} +| | ... | Add Fib Table | ${nodes['${dut}']} | ${fib_table_1} +| | ${ip_base_if1}= | Evaluate | ${dut_index} + ${1} +| | ${ip_net_if1}= | Set Variable +| | ... | ${ip_base_if1}.${ip_base_if1}.${ip_base_if1} +| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if1_net} | 24 +| | ... | vrf=${fib_table_1} | gateway=${ip_net_if1}.1 +| | ... | interface=${${dut}_if1} | multipath=${TRUE} +| | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_if1} +| | ... | ${fib_table_1} +| | Configure IP addresses on interfaces | ${nodes['${dut}']} | ${${dut}_if1} +| | ... | ${ip_net_if1}.2 | 30 +| | ${prev_node}= | Run Keyword If | ${dut_index} == ${0} +| | ... | Set Variable | TG +| | ... | ELSE | Get From List | ${duts} | ${dut_index-${1}} +| | ${prev_if}= | Run Keyword If | ${dut_index} == ${0} +| | ... | Set Variable | if1 +| | ... | ELSE | Set Variable | if2 +| | ${prev_if_mac}= | Get Interface MAC | ${nodes['${prev_node}']} +| | ... | ${${prev_node}_${prev_if}} +| | VPP Add IP Neighbor +| | ... | ${nodes['${dut}']} | ${${dut}_if1} | ${ip_net_if1}.1 | ${prev_if_mac} +| | ... +| | ${fib_table_2}= | Evaluate | ${fib_table_1} + ${count} +| | Add Fib Table | ${nodes['${dut}']} | ${fib_table_2} +| | ${ip_base_if2}= | Evaluate | ${ip_base_if1} + ${1} +| | ${ip_net_if2}= | Set Variable +| | ... | ${ip_base_if2}.${ip_base_if2}.${ip_base_if2} +| | Vpp Route Add | ${nodes['${dut}']} | ${tg_if2_net} | 24 +| | ... | vrf=${fib_table_2} | gateway=${ip_net_if2}.2 +| | ... | interface=${${dut}_if2} | multipath=${TRUE} +| | Assign Interface To Fib Table | ${nodes['${dut}']} | ${${dut}_if2} +| | ... | ${fib_table_2} +| | Configure IP addresses on interfaces | ${nodes['${dut}']} | ${${dut}_if2} +| | ... | ${ip_net_if2}.1 | 30 +| | ${next_node}= | Run Keyword If | ${dut_index} == ${last_dut_index} +| | ... | Set Variable | TG +| | ... | ELSE | Get From List | ${duts} | ${dut_index+${1}} +| | ${next_if}= | Run Keyword If | ${dut_index} == ${last_dut_index} +| | ... | Set Variable | if2 +| | ... | ELSE | Set Variable | if1 +| | ${next_if_mac}= | Get Interface MAC | ${nodes['${next_node}']} +| | ... | ${${next_node}_${next_if}} +| | VPP Add IP Neighbor +| | ... | ${nodes['${dut}']} | ${${dut}_if2} | ${ip_net_if2}.2 | ${next_if_mac} +| | ... +| | ${fib_table_1}= | Evaluate | ${fib_table_1} - ${1} +| | ${ip_base_start}= | Set Variable | ${31} +| | :FOR | ${number} | IN RANGE | 1 | ${count+${1}} +| | | ${sock1}= | Set Variable | memif-${dut}_CNF +| | | ${sock2}= | Set Variable | memif-${dut}_CNF +| | | Set up memif interfaces on DUT node | ${nodes['${dut}']} +| | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1 +| | | ... | ${dut}-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} +| | | ${memif1}= | Set Variable | ${${dut}-memif-${number}-if1} +| | | ${memif2}= | Set Variable | ${${dut}-memif-${number}-if2} +| | | ${fib_table_1}= | Evaluate | ${fib_table_1} + ${1} +| | | ${fib_table_2}= | Evaluate | ${fib_table_1} + ${1} +| | | Run Keyword Unless | ${number} == ${count} +| | | ... | Add Fib Table | ${nodes['${dut}']} | ${fib_table_2} +| | | Assign Interface To Fib Table | ${nodes['${dut}']} +| | | ... | ${memif1} | ${fib_table_1} +| | | Assign Interface To Fib Table | ${nodes['${dut}']} +| | | ... | ${memif2} | ${fib_table_2} +| | | ${ip_base_memif1}= | Evaluate +| | | ... | ${ip_base_start} + (${number} - ${1}) * ${2} +| | | ${ip_base_memif2}= | Evaluate | ${ip_base_memif1} + ${1} +| | | ${ip_net_memif1}= | Set Variable +| | | ... | ${ip_base_memif1}.${ip_base_memif1}.${ip_base_memif1} +| | | ${ip_net_memif2}= | Set Variable +| | | ... | ${ip_base_memif2}.${ip_base_memif2}.${ip_base_memif2} +| | | Configure IP addresses on interfaces +| | | ... | ${nodes['${dut}']} | ${memif1} | ${ip_net_memif1}.1 | 30 +| | | ... | ${nodes['${dut}']} | ${memif2} | ${ip_net_memif2}.1 | 30 +| | | Vpp Route Add | ${nodes['${dut}']} | ${tg_if2_net} | 24 +| | | ... | vrf=${fib_table_1} | gateway=${ip_net_memif2}.1 +| | | ... | interface=${memif1} +| | | Vpp Route Add | ${nodes['${dut}']} | ${tg_if1_net} | 24 +| | | ... | vrf=${fib_table_2} | gateway=${ip_net_memif1}.1 +| | | ... | interface=${memif2} +| | | ${memif_if1_key}= | Get interface by sw index | ${nodes['${dut}']} +| | | ... | ${memif1} +| | | ${memif_if1_mac}= | Get interface mac | ${nodes['${dut}']} +| | | ... | ${memif_if1_key} +| | | ${memif_if2_key}= | Get interface by sw index | ${nodes['${dut}']} +| | | ... | ${memif2} +| | | ${memif_if2_mac}= | Get interface mac | ${nodes['${dut}']} +| | | ... | ${memif_if2_key} +| | | VPP Add IP Neighbor | ${nodes['${dut}']} +| | | ... | ${memif1} | ${ip_net_memif2}.1 | ${memif_if2_mac} +| | | VPP Add IP Neighbor | ${nodes['${dut}']} +| | | ... | ${memif2} | ${ip_net_memif1}.1 | ${memif_if1_mac} + +| Initialize IPv4 routing with memif pairs +| | [Documentation] +| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each +| | ... | Memif interface to separate IPv4 VRF with one physical or +| | ... | virtual interface to create a chain accross DUT node. +| | ... +| | ... | *Arguments:* +| | ... | - count - Number of memif pairs (containers). Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv4 routing with memif pairs \| ${1} \| +| | ... +| | [Arguments] | ${count}=${1} +| | ... +| | :FOR | ${dut} | IN | @{duts} +| | | Initialize IPv4 routing with memif pairs on DUT node | ${dut} | ${count} | | Set interfaces in path up | | Show Memif on all DUTs | ${nodes} +| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif | Initialize L2 xconnect for single memif | | [Documentation] @@ -2510,11 +2773,11 @@ | | ... | connect Memif interface with one physical interface. | | ... | | ... | *Arguments:* -| | ... | - ${number} - Memif ID. Type: integer +| | ... | - number - Memif ID. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... | - /tmp/memif-DUT1_CNF\${number}-\${sid} | | ... | | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs @@ -2527,14 +2790,16 @@ | | ... | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | ${sock}= | Set Variable | memif-${dut}_VNF +| | | ${sock}= | Set Variable | memif-${dut}_CNF +| | | ${sid}= | Evaluate | (${number} * ${2}) - ${1} | | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock} -| | | ... | ${number} | ${dut}-memif-${number}-if1 | ${rxq_count_int} -| | | ... | ${rxq_count_int} +| | | ... | mid=${number} | sid=${sid} | memif_if=${dut}-memif-${number}-if1 +| | | ... | rxq=${rxq_count_int} | txq=${rxq_count_int} | | | Configure L2XC | ${nodes['${dut}']} | ${${dut}_if1} | | | ... | ${${dut}-memif-${number}-if1} -| | Set interfaces in path up +| | Set single interfaces in path up | | Show Memif on all DUTs | ${nodes} +| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif | Initialize L2 Bridge Domain for single memif | | [Documentation] @@ -2542,11 +2807,11 @@ | | ... | interface to separate L2 bridge domain with one physical interface. | | ... | | ... | *Arguments:* -| | ... | - ${number} - Memif ID. Type: integer +| | ... | - number - Memif ID. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... | - /tmp/memif-DUT1_CNF\${number}-\${sid} | | ... | | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs @@ -2559,15 +2824,16 @@ | | ... | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | ${sock}= | Set Variable | memif-${dut}_VNF +| | | ${sock}= | Set Variable | memif-${dut}_CNF +| | | ${sid}= | Evaluate | (${number} * ${2}) - ${1} | | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock} -| | | ... | ${number} | ${dut}-memif-${number}-if1 | ${rxq_count_int} -| | | ... | ${rxq_count_int} +| | | ... | mid=${number} | sid=${sid} | memif_if=${dut}-memif-${number}-if1 +| | | ... | rxq=${rxq_count_int} | txq=${rxq_count_int} | | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | | | ... | ${number} | | | Add interface to bridge domain | ${nodes['${dut}']} | | | ... | ${${dut}-memif-${number}-if1} | ${number} -| | Set interfaces in path up +| | Set single interfaces in path up | | Show Memif on all DUTs | ${nodes} | Configure ACLs on a single interface @@ -2593,7 +2859,7 @@ | | | ${acl} = | Run Keyword If | '${acl}' == '${EMPTY}' | | | ... | Set Variable | ipv4 ${acl_action} src ${subnet} | | | ... | ELSE -| | | ... | Catenate | SEPARATOR=, | ${acl} +| | | ... | Catenate | SEPARATOR=", " | ${acl} | | | ... | ipv4 ${acl_action} src ${subnet} | | Add Replace Acl Multi Entries | ${dut} | rules=${acl} | | @{acl_list} = | Create List | ${0}