X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_configuration.robot;h=9ea6e0d42720097a1d2febbe26a3cab1cadf1f57;hp=43e1a3265b14628242e91ac7a2085686f2ac0bf8;hb=c05d97223e4b69a5fab1d9f47421283c70440d38;hpb=491d727115e757aa2d5a7df8048fe17b5ceb16ce diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 43e1a3265b..9ea6e0d427 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -29,6 +29,7 @@ | Resource | resources/libraries/robot/shared/counters.robot | Resource | resources/libraries/robot/l2/l2_bridge_domain.robot | Resource | resources/libraries/robot/l2/l2_xconnect.robot +| Resource | resources/libraries/robot/l2/l2_patch.robot | Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/ip/ip6.robot | Resource | resources/libraries/robot/vm/qemu.robot @@ -37,26 +38,24 @@ | Documentation | Performance suite keywords - configuration. *** Keywords *** -| Set interfaces in path in 2-node circular topology up +| Set interfaces in path up | | [Documentation] -| | ... | *Set UP state on VPP interfaces in path on nodes in 2-node circular -| | ... | topology.* -| | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Vpp Node Interfaces Ready Wait | ${dut1} - -| Set interfaces in path in 3-node circular topology up -| | [Documentation] -| | ... | *Set UP state on VPP interfaces in path on nodes in 3-node circular -| | ... | topology.* -| | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up -| | Vpp Node Interfaces Ready Wait | ${dut1} -| | Vpp Node Interfaces Ready Wait | ${dut2} +| | ... | *Set UP state on VPP interfaces in path on all DUT nodes and set +| | ... | maximal MTU.* +| | ... +# TODO: Rework KW to set all interfaces in path UP and set MTU (including +# software interfaces. Run KW at the end phase of VPP setup to split +# from other "functial" configuration. This will allow modularity of this +# library +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up +| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up +| | All VPP Interfaces Ready Wait | ${nodes} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} +| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2} | Initialize IPSec in 3-node circular topology | | [Documentation] @@ -67,19 +66,15 @@ | | ... | with prefix /8 and next hop of neighbour DUT or TG interface IPv4 | | ... | address. | | ... +| | Set interfaces in path up | | VPP Show Crypto Device Mapping | ${dut1} | | VPP Show Crypto Device Mapping | ${dut2} -| | Set interfaces in path in 3-node circular topology up | | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if1_mac}= | Get Interface MAC | ${dut1} | ${dut1_if1} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | ${dut2_if2_mac}= | Get Interface MAC | ${dut2} | ${dut2_if2} -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up | | Set Test Variable | ${tg_if1_mac} | | Set Test Variable | ${tg_if2_mac} | | Set Test Variable | ${dut1_if1_mac} @@ -101,6 +96,23 @@ | | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | ${tg_if1_ip4} | ${dut1_if1} | | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | ${tg_if2_ip4} | ${dut2_if2} +| Initialize IPv4 forwarding in 2-node circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular +| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP +| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and +| | ... | /30 prefix on DUT1 link. +| | ... +| | Set interfaces in path up +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} +| | ... | 10.10.10.1 | 24 +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} +| | ... | 20.20.20.1 | 24 + | Initialize IPv4 forwarding in 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular @@ -109,10 +121,7 @@ | | ... | /30 prefix on DUT1-DUT2 link. Set routing on both DUT nodes with | | ... | prefix /24 and next hop of neighbour DUT interface IPv4 address. | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -131,27 +140,6 @@ | | ... | 20.20.20.1 | 24 | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} -| | All Vpp Interfaces Ready Wait | ${nodes} - -| Initialize IPv4 forwarding in 2-node circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular -| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP -| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and -| | ... | /30 prefix on DUT1 link. Set routing on DUT node with prefix /24 and -| | ... | next hop of neighbour DUT interface IPv4 address. -| | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.3 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 20.20.20.3 | ${tg1_if2_mac} -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} -| | ... | 10.10.10.2 | 24 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} -| | ... | 20.20.20.2 | 24 -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize IPv4 forwarding with scaling in 3-node circular topology | | [Documentation] @@ -171,10 +159,7 @@ | | ... | | [Arguments] | ${count} | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -195,7 +180,6 @@ | | ... | count=${count} | | Vpp Route Add | ${dut2} | 20.0.0.0 | 32 | 3.3.3.1 | ${dut2_if2} | | ... | count=${count} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize IPv4 forwarding with vhost in 3-node circular topology | | [Documentation] @@ -230,7 +214,7 @@ | | ... | | [Arguments] | ${sock1} | ${sock2} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Configure vhost interfaces for L2BD forwarding | ${dut1} | | ... | ${sock1} | ${sock2} | dut1_vhost_if1 | dut1_vhost_if2 | | ${dut1_vif1}= | Set Variable | ${dut1_vhost_if1} @@ -355,7 +339,7 @@ | | ... | \| IPv4 forwarding with Vhost-User for '2' VMs initialized in \ | | ... | a 3-node circular topology \| | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | ${fib_table_1}= | Set Variable | ${101} | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nr} | | Add Fib Table | ${dut1} | ${fib_table_1} @@ -518,6 +502,23 @@ | | Policer Classify Set Match IP | 10.10.10.2 | ${False} | | Policer Set Configuration +| Initialize IPv6 forwarding in 2-node circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular +| | ... | topology. Get the interface MAC addresses and setup neighbour on all +| | ... | VPP interfaces. Setup IPv6 addresses with /128 prefixes on all +| | ... | interfaces. +| | ... +| | Set interfaces in path up +| | ${prefix}= | Set Variable | 64 +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:1::1 | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | 2001:2::1 | ${prefix} +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} +| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | 2001:2::2 | ${tg1_if2_mac} + | Initialize IPv6 forwarding in 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular @@ -526,6 +527,7 @@ | | ... | interfaces. Set routing on both DUT nodes with prefix /64 and | | ... | next hop of neighbour DUT interface IPv6 address. | | ... +| | Set interfaces in path up | | ${prefix}= | Set Variable | 64 | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} @@ -561,6 +563,7 @@ | | ... | | [Arguments] | ${count} | | ... +| | Set interfaces in path up | | ${subn_prefix}= | Set Variable | 64 | | ${host_prefix}= | Set Variable | 128 | | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:3::1 | ${subn_prefix} @@ -640,6 +643,7 @@ | | ... | ${dut1_if2} | | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | ${dut1_if2_ip6} | | ... | ${dut2_if1} +# Configure SRv6 for direction0 | | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} | | @{sid_list_dir0}= | Run Keyword If | "${n}" == "1" | | ... | Create List | ${dut2_sid1} @@ -660,6 +664,7 @@ | | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" | | ... | Vpp Route Add | ${dut2} | ${dut2_sid1_2} | ${sid_prefix} | | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2} +# Configure SRv6 for direction1 | | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} | | @{sid_list_dir1}= | Run Keyword If | "${n}" == "1" | | ... | Create List | ${dut1_sid2} @@ -680,15 +685,147 @@ | | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" | | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix} | | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1} +| | Set interfaces in path up + +| Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via '${behavior}' behaviour in 3-node circular topology +| | [Documentation] +| | ... | Create pair of Memif interfaces on all defined VPP nodes. Set UP +| | ... | state on VPP interfaces in path on nodes in 3-node circular topology. +| | ... | Get the interface MAC addresses and setup neighbours on all VPP +| | ... | interfaces. Setup IPv6 addresses on all interfaces. Set segment +| | ... | routing for IPv6 with defined behaviour function and configure IPv6 +| | ... | routes on both DUT nodes. +| | ... +| | ... | *Note:* +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ${sock1}= | Set Variable | memif-DUT1_VNF +| | ${sock2}= | Set Variable | memif-DUT2_VNF +| | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} +| | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if1} +| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if2} +| | Set up memif interfaces on DUT node | ${dut2} | ${sock2} | ${sock2} +| | ... | ${1} | dut2-memif-1-if1 | dut2-memif-1-if2 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if1} +| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if2} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Show Memif | ${nodes['${dut}']} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1-memif-1-if1} +| | ... | ${dut1-memif-1-if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1-memif-1-if2} +| | ... | ${dut1-memif-1-if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2-memif-1-if1} +| | ... | ${dut2-memif-1-if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2-memif-1-if2} +| | ... | ${dut2-memif-1-if2_ip6} | ${prefix} +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} +| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 +| | ... | ${tg1_if1_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 +| | ... | ${tg1_if2_mac} +| | ${dut1-memif-1-if2_mac}= | Get Interface MAC | ${dut1} | memif2 +| | ${dut2-memif-1-if2_mac}= | Get Interface MAC | ${dut2} | memif2 +| | Add Ip Neighbor | ${dut1} | ${dut1-memif-1-if1} | ${dut1_nh} +| | ... | ${dut1-memif-1-if2_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2-memif-1-if1} | ${dut2_nh} +| | ... | ${dut2-memif-1-if2_mac} +| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix} | ${dut2_if1_ip6} +| | ... | ${dut1_if2} +| | Vpp Route Add | ${dut1} | ${out_sid2_1} | ${sid_prefix} +| | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1} +| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix} | ${dut1_if2_ip6} +| | ... | ${dut2_if1} +| | Vpp Route Add | ${dut2} | ${out_sid1_1} | ${sid_prefix} +| | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2} +# Configure SRv6 for direction0 on DUT1 +| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} +| | @{sid_list_dir0}= | Create List | ${dut2_sid1} | ${out_sid1_1} +| | ... | ${out_sid1_2} +| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap +| | ... | @{sid_list_dir0} +| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} +| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} +# Configure SRv6 for direction1 on DUT2 +| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} +| | @{sid_list_dir1}= | Create List | ${dut1_sid2} | ${out_sid2_1} +| | ... | ${out_sid2_2} +| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap +| | ... | @{sid_list_dir1} +| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} +| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} +# Configure SRv6 for direction0 on DUT2 +| | ${dut2_out_if}= | Get Interface Name | ${dut2} | memif1 +| | ${dut2_in_if}= | Get Interface Name | ${dut2} | memif2 +| | Remove Values From List | ${sid_list_dir0} | ${dut2_sid1} +| | Run Keyword If | "${behavior}" == "static_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.as +| | ... | ${NONE} | ${dut2_nh} | ${NONE} | ${dut2_out_if} | ${dut2_in_if} +| | ... | ${dut1_sid1} | @{sid_list_dir0} +| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.ad +| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} +| | ... | ELSE IF | "${behavior}" == "masquerading" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.am +| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} +| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} +# Configure SRv6 for direction1 on DUT1 +| | ${dut1_out_if}= | Get Interface Name | ${dut1} | memif1 +| | ${dut1_in_if}= | Get Interface Name | ${dut1} | memif2 +| | Remove Values From List | ${sid_list_dir1} | ${dut1_sid2} +| | Run Keyword If | "${behavior}" == "static_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.as +| | ... | ${NONE} | ${dut1_nh} | ${NONE} | ${dut1_out_if} | ${dut1_in_if} +| | ... | ${dut2_sid2} | @{sid_list_dir1} +| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.ad +| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} +| | ... | ELSE IF | "${behavior}" == "masquerading" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.am +| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} +| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} +| | Set interfaces in path up + +| Initialize L2 patch +| | [Documentation] +| | ... | Setup L2 patch topology by cross connecting two interfaces on +| | ... | each DUT. Interfaces are brought up. +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Configure L2patch | ${nodes['${dut}']} | ${${dut}_if1} | ${${dut}_if2} +| | Set interfaces in path up + +| Initialize L2 xconnect in 2-node circular topology +| | [Documentation] +| | ... | Setup L2 xconnect topology by cross connecting two interfaces on +| | ... | each DUT. Interfaces are brought up. +| | ... +| | Set interfaces in path up +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1_if2} | Initialize L2 xconnect in 3-node circular topology | | [Documentation] | | ... | Setup L2 xconnect topology by cross connecting two interfaces on | | ... | each DUT. Interfaces are brought up. | | ... | +| | Set interfaces in path up | | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1_if2} | | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | [Documentation] @@ -698,7 +835,7 @@ | | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as | | ... | interfaces. | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -806,7 +943,7 @@ | | ... | | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -821,6 +958,123 @@ | | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} | | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} +| Initialize L2 xconnect with Vhost-User and VLAN with DPDK link bonding in 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Setup VLAN +| | ... | on BondEthernet interfaces between DUTs. Cross connect one Vhost +| | ... | interface with physical interface towards TG and other Vhost interface +| | ... | with VLAN sub-interface. All interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 xconnect with Vhost-User and VLAN with DPDK link\ +| | ... | bonding in 3-node circular topology \| /tmp/sock1 \| /tmp/sock2 \ +| | ... | \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} +| | ... +| | Set interfaces in path up +| | Add DPDK bonded ethernet interfaces to topology file in 3-node single link topology +| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} +| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} +| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} +| | ... | ${subid} +| | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} +| | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} +| | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} +| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} +| | All VPP Interfaces Ready Wait | ${nodes} + +| Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Create one +| | ... | link bonding (BondEthernet) interface on both VPP nodes. Enslave one +| | ... | physical interface towards next DUT by BondEthernet interface. Setup +| | ... | VLAN on BondEthernet interfaces between DUTs. Cross connect one Vhost +| | ... | interface with physical interface towards TG and other Vhost interface +| | ... | with VLAN sub-interface. All interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... | - bond_mode - Link bonding mode. Type: string +| | ... | - lb_mode - Load balance mode. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 xconnect with Vhost-User and VLAN with VPP link\ +| | ... | bonding in 3-node circular topology \| /tmp/sock1 \| /tmp/sock2 \ +| | ... | \| 10 \| pop-1 \| \| xor \| l34 \| +| | ... +| | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | ${bond_mode} +| | ... | ${lb_mode} +| | ... +| | Set interfaces in path up +| | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} +| | ... | ${lb_mode} +| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} +| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} +| | ... | ${lb_mode} +| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} +| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ... | ${dut2_eth_bond_if1} +| | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} +| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} +| | ... | ${subid} +| | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} +| | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} +| | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} +| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} + +| Initialize L2 bridge domain in 2-node circular topology +| | [Documentation] +| | ... | Setup L2 DB topology by adding two interfaces on DUT into BD +| | ... | that is created automatically with index 1. Learning is enabled. +| | ... | Interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id - Bridge domain ID. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 bridge domain in 2-node circular topology \| 1 \| +| | ... +| | [Arguments] | ${bd_id}=${1} +| | ... +| | Set interfaces in path up +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} +| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} + | Initialize L2 bridge domain in 3-node circular topology | | [Documentation] | | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD @@ -836,11 +1090,11 @@ | | ... | | [Arguments] | ${bd_id}=${1} | | ... +| | Set interfaces in path up | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} | | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} | | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id} -| | All Vpp Interfaces Ready Wait | ${nodes} | Configure IPv4 ACLs | | [Documentation] @@ -875,7 +1129,7 @@ | | ... | - ${trex_stream2_subnet} - IP subnet used by T-Rex in direction 1->0. | | ... | Type: string | | ... -| | [Arguments] | ${dut} | ${dut_if1}=${None} | ${dut_if2}=${None} +| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} | | ${src_ip_int} = | Evaluate | | ... | int(ipaddress.ip_address(unicode($src_ip_start))) - $ip_step | | ... | modules=ipaddress @@ -896,9 +1150,9 @@ | | | ${dport}= | Evaluate | $dport + $port_step | | | ${ipv4_limit_reached}= | Set Variable If | | | ... | $src_ip_int > $ip_limit_int or $src_ip_int > $ip_limit_int -| | | ... | ${True} +| | | ... | ${TRUE} | | | ${udp_limit_reached}= | Set Variable If -| | | ... | $sport > $port_limit or $dport > $port_limit | ${True} +| | | ... | $sport > $port_limit or $dport > $port_limit | ${TRUE} | | | Run Keyword If | $ipv4_limit_reached is True | Log | | | ... | Can't do more iterations - IPv4 address limit has been reached. | | | ... | WARN @@ -960,9 +1214,9 @@ | | ... | - ${dut2_if1} - DUT2 interface towards DUT1. | | ... | - ${dut2_if2} - DUT2 interface towards TG. | | ... +| | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} | | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | All Vpp Interfaces Ready Wait | ${nodes} | | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} | Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology @@ -990,10 +1244,7 @@ | | ... | - ${dut2_if1} - DUT2 interface towards DUT1. | | ... | - ${dut2_if2} - DUT2 interface towards TG. | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -1012,7 +1263,6 @@ | | ... | ${dut2} | ${dut2_if2} | 20.20.20.1 | 24 | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} -| | All Vpp Interfaces Ready Wait | ${nodes} | | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} | Configure MACIP ACLs @@ -1053,7 +1303,7 @@ | | ... | - ${tg_mac_mask} - MAC address mask for traffic streams. | | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string | | ... -| | [Arguments] | ${dut} | ${dut_if1}=${None} | ${dut_if2}=${None} +| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} | | ... | | ${src_ip_int} = | IP To Int | ${src_ip_start} | | ${src_ip_int} = | Evaluate | ${src_ip_int} - ${ip_step} @@ -1131,9 +1381,9 @@ | | ... | - ${dut2_if1} - DUT2 interface towards DUT1. | | ... | - ${dut2_if2} - DUT2 interface towards TG. | | ... +| | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} | | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | All Vpp Interfaces Ready Wait | ${nodes} | | Configure MACIP ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} | Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -1228,7 +1478,7 @@ | | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as | | ... | interfaces. | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | | ... | 24 | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 @@ -1243,7 +1493,6 @@ | | ... | 172.16.0.2 | 172.16.0.1 | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} | | Configure L2BD forwarding | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology | | [Documentation] @@ -1268,11 +1517,11 @@ | | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | | ... -| | Set interfaces in path in 3-node circular topology up | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | | ... | 24 | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | | ... | 24 +| | Set interfaces in path up | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 | | ... | 172.16.0.1 | 172.16.0.2 | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 @@ -1290,6 +1539,76 @@ | | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on one VPP node. Add each +| | ... | Vhost-User interface into L2 bridge domains with learning enabled +| | ... | one connected to physical interface, the other to VXLAN. +| | ... | Setup VXLANoIPv4 between DUTs and TG by connecting physical and vxlan +| | ... | interfaces on the DUT. All interfaces are brought up. +| | ... | IPv4 addresses with prefix /24 are configured on interfaces between +| | ... | DUT and TG. +| | ... +| | ... | *Arguments:* +| | ... | - dut1_address - Address of physical interface on DUT1. Type: string +| | ... | - dut1_address_subnet - Subnet of the address of physical interface on +| | ... | DUT1. Type: string +| | ... | - dut2_address - Address of physical interface on DUT2. Type: string +| | ... | - dut2_address_subnet - Subnet of the address of physical interface on +| | ... | DUT2. Type: string +| | ... | - dut1_gw - Address of the _gateway_ to which the traffic will be +| | ... | forwarded on DUT1. Type: string +| | ... | - dut2_gw - Address of the _gateway_ to which the traffic will be +| | ... | forwarded on DUT2. Type: string +| | ... | - dut1_vxlans - List of VXLAN params to be configured on DUT1. +| | ... | Type: list of dicts, dict params vni, vtep +| | ... | - dut2_vxlans - List of VXLAN params to be configured on DUT2. +| | ... | Type: list of dicts, dict params vni, vtep +| | ... | - dut1_route_subnet - Subnet address to forward to _gateway_ on DUT1. +| | ... | Type: string +| | ... | - dut1_route_mask - Subnet address mask to forward to _gateway_ +| | ... | on DUT1. Type: string +| | ... | - dut2_route_subnet - Subnet address to forward to _gateway_ on DUT2. +| | ... | Type: string +| | ... | - dut2_route_mask - Subnet address mask to forward to _gateway_ +| | ... | on DUT2. Type: string +| | ... +| | ... | *Example:* +| | ... +| | [Arguments] | ${dut1_address} | ${dut1_address_subnet} | +| | ... | ${dut2_address} | ${dut2_address_subnet} | ${dut1_gw} | ${dut2_gw} | +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | ${dut1_route_subnet} | +| | ... | ${dut1_route_mask} | ${dut2_route_subnet} | ${dut2_route_mask} +| | ... +| | Set interfaces in path up +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | +| | ... | ${dut1_address} | ${dut1_address_subnet} +| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | +| | ... | ${dut2_address} | ${dut2_address_subnet} +| | ${dut1_bd_id1}= | Set Variable | 1 +| | ${dut1_bd_id2}= | Set Variable | 2 +| | ${dut2_bd_id1}= | Set Variable | 1 +| | :FOR | ${vxlan} | IN | @{dut1_vxlans} +| | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | ${vxlan.vni} +| | | ... | ${dut1_address} | ${vxlan.vtep} +| | | Add interface to bridge domain | ${dut1} | ${dut1s_vxlan} | ${dut1_bd_id1} +| | :FOR | ${vxlan} | IN | @{dut2_vxlans} +| | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | ${vxlan.vni} +| | | ... | ${dut2_address} | ${vxlan.vtep} +| | | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${dut2_bd_id1} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Add arp on dut | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | ${dut1_route_subnet} | ${dut1_route_mask} +| | ... | ${dut1_gw} | ${dut1_if1} +| | Vpp Route Add | ${dut2} | ${dut2_route_subnet} | ${dut2_route_mask} +| | ... | ${dut2_gw} | ${dut2_if2} +| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${dut1_bd_id2} +| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${dut2_bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${dut1_bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${dut1_bd_id2} + | Initialize L2 bridge domains with Vhost-User in 2-node circular topology | | [Documentation] | | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each @@ -1341,7 +1660,7 @@ | | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1351,7 +1670,6 @@ | | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id1} | | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology | | [Documentation] @@ -1371,13 +1689,13 @@ | | ... | *Example:* | | ... | | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in a 3-node\ -| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| 10\ -| | ... | pop-1 \| +| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| 10 \ +| | ... | \| pop-1 \| | | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} | | ... | ${tag_rewrite} | | ... -| | Set interfaces in path in 3-node circular topology up +| | Set interfaces in path up | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1396,24 +1714,166 @@ | | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| Add PCI devices to DUTs in 3-node single link topology +| Initialize L2 bridge domains with Vhost-User and VLAN with DPDK link bonding in a 3-node circular topology | | [Documentation] -| | ... | Add PCI devices to VPP configuration file. +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Setup VLAN +| | ... | on BondEthernet interfaces between DUTs. Add one Vhost-User interface +| | ... | into L2 bridge domains with learning enabled with physical interface +| | ... | towards TG and other Vhost-User interface into L2 bridge domains with +| | ... | learning enabled with VLAN sub-interface. All interfaces are brought +| | ... | up. | | ... -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} | ${dut1_if2_pci} -| | Run keyword | DUT2.Add DPDK Dev | ${dut2_if1_pci} | ${dut2_if2_pci} +| | ... | *Arguments:* +| | ... | - bd_id1 - Bridge domain ID. Type: integer +| | ... | - bd_id2 - Bridge domain ID. Type: integer +| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string +| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 bridge domains with Vhost-User and VLAN with DPDK\ +| | ... | link bonding in a 3-node circular topology \| 1 \| 2 \| /tmp/sock1 \ +| | ... | \| /tmp/sock2 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} +| | ... | ${tag_rewrite} +| | ... +| | Set interfaces in path up +| | Add DPDK bonded ethernet interfaces to topology file in 3-node single link topology +| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} +| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} +| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} +| | ... | ${subid} +| | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} +| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} +| | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} +| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} +| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| Add PCI devices to DUTs in 2-node single link topology +| Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Create one +| | ... | link bonding (BondEthernet) interface on both VPP nodes. Enslave one +| | ... | physical interface towards next DUT by BondEthernet interface. Setup +| | ... | VLAN on BondEthernet interfaces between DUTs. Add one Vhost-User +| | ... | interface into L2 bridge domains with learning enabled with physical +| | ... | interface towards TG and other Vhost-User interface into L2 bridge +| | ... | domains with learning enabled with VLAN sub-interface. All interfaces +| | ... | are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id1 - Bridge domain ID. Type: integer +| | ... | - bd_id2 - Bridge domain ID. Type: integer +| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string +| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... | - bond_mode - Link bonding mode. Type: string +| | ... | - lb_mode - Load balance mode. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 bridge domains with Vhost-User and VLAN with VPP\ +| | ... | link bonding in a 3-node circular topology \| 1 \| 2 \| /tmp/sock1 \ +| | ... | \| /tmp/sock2 \| 10 \| pop-1 \| xor \| l34 \| +| | ... +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} +| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode} +| | ... +| | Set interfaces in path up +| | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} +| | ... | ${lb_mode} +| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} +| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} +| | ... | ${lb_mode} +| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} +| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ... | ${dut2_eth_bond_if1} +| | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} +| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} +| | ... | ${subid} +| | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} +| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} +| | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} +| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} +| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} + +| Add PCI devices to all DUTs | | [Documentation] | | ... | Add PCI devices to VPP configuration file. | | ... -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} | ${dut1_if2_pci} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} +| | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} +| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} | ${if2_pci} +| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} +| | | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} + +| Add single PCI device to all DUTs +| | [Documentation] +| | ... | Add single (first) PCI device on DUT1 and single (last) PCI device on +| | ... | DUT2 to VPP configuration file. +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_pci}= | Run Keyword If | '${dut}' == 'DUT1' | Get Interface PCI Addr +| | | ... | ${nodes['${dut}']} | ${${dut}_if1} | ELSE | Get Interface PCI Addr +| | | ... | ${nodes['${dut}']} | ${${dut}_if2} +| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} +| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} + +| Add VLAN Strip Offload switch off between DUTs in 3-node single link topology +| | [Documentation] +| | ... | Add VLAN Strip Offload switch off on PCI devices between DUTs to VPP +| | ... | configuration file. +| | ... +| | Run keyword | DUT1.Add DPDK Dev Parameter | ${dut1_if2_pci} +| | ... | vlan-strip-offload | off +| | Run keyword | DUT2.Add DPDK Dev Parameter | ${dut2_if1_pci} +| | ... | vlan-strip-offload | off + +| Add DPDK bonded ethernet interfaces to DUTs in 3-node single link topology +| | [Documentation] +| | ... | Add DPDK bonded Ethernet interfaces with mode XOR and transmit policy +| | ... | l34 to VPP configuration file. +| | ... +| | Run keyword | DUT1.Add DPDK Eth Bond Dev | 0 | 2 | l34 | ${dut1_if2_pci} +| | Run keyword | DUT2.Add DPDK Eth Bond Dev | 0 | 2 | l34 | ${dut2_if1_pci} + +| Add DPDK bonded ethernet interfaces to topology file in 3-node single link topology +| | Add Bond Eth Interface | ${dut1} | ${dut1_eth_bond_if1_name} +| | Add Bond Eth Interface | ${dut2} | ${dut2_eth_bond_if1_name} | Configure guest VM with dpdk-testpmd connected via vhost-user | | [Documentation] @@ -1435,6 +1895,7 @@ | | ... | Type: integer | | ... | - jumbo_frames - Set True if jumbo frames are used in the test. | | ... | Type: bool +| | ... | - use_tuned_cfs - FIXME. | | ... | | ... | *Example:* | | ... @@ -1464,9 +1925,12 @@ | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} | | ... | jumbo_frames=${jumbo_frames} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 @@ -1477,7 +1941,7 @@ | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy | | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} | | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | eal_mem_channels=4 -| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${True} +| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE} | | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} | | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} @@ -1516,8 +1980,6 @@ | | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} | | | ... | jumbo_frames=${jumbo_frames} | | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} -| | | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built} -| | | ... | ${True} | Configure guest VM with dpdk-testpmd using SMT connected via vhost-user | | [Documentation] @@ -1536,6 +1998,7 @@ | | ... | - count - number of cpus which will be allocated for qemu. Type: int | | ... | - jumbo_frames - Set True if jumbo frames are used in the test. | | ... | Type: bool +| | ... | - use_tuned_cfs - FIXME. | | ... | | ... | *Example:* | | ... @@ -1551,17 +2014,18 @@ | | ${dut_numa}= | Get interfaces numa node | ${dut_node} | | ... | ${dut1_if1} | ${dut1_if2} | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${TRUE} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | ... | jumbo_frames=${jumbo_frames} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} | | ... | jumbo_frames=${jumbo_frames} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 @@ -1572,7 +2036,7 @@ | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy | | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} | | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | eal_mem_channels=4 -| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${True} +| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE} | | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} | | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} @@ -1599,6 +2063,7 @@ | | ... | Type: integer | | ... | - jumbo_frames - Set True if jumbo frames are used in the test. | | ... | Type: bool +| | ... | - use_tuned_cfs - FIXME. | | ... | | ... | *Example:* | | ... @@ -1626,15 +2091,16 @@ | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} | | ... | skip_cnt=${skip_cnt} | cpu_cnt=${count} | smt_used=${False} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | ... | jumbo_frames=${jumbo_frames} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} | | ... | jumbo_frames=${jumbo_frames} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 @@ -1646,7 +2112,7 @@ | | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} | | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} -| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${True} +| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${TRUE} | | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} | | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} @@ -1692,8 +2158,6 @@ | | | ... | count=${vm_cpus} | qemu_id=${number} | | | ... | jumbo_frames=${jumbo_frames} | | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} -| | | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built} -| | | ... | ${True} | Configure guest VM with dpdk-testpmd-mac using SMT connected via vhost-user | | [Documentation] @@ -1714,6 +2178,7 @@ | | ... | - count - number of cpus which will be allocated for qemu. Type: int | | ... | - jumbo_frames - Set True if jumbo frames are used in the test. | | ... | Type: bool +| | ... | - use_tuned_cfs - FIXME. | | ... | | ... | *Example:* | | ... @@ -1730,17 +2195,18 @@ | | ${dut_numa}= | Get interfaces numa node | ${dut_node} | | ... | ${dut1_if1} | ${dut1_if2} | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${TRUE} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | ... | jumbo_frames=${jumbo_frames} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} | | ... | jumbo_frames=${jumbo_frames} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 @@ -1752,7 +2218,7 @@ | | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} | | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} -| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${True} +| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${TRUE} | | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} | | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} @@ -1788,9 +2254,12 @@ | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 @@ -1834,13 +2303,16 @@ | | ${dut_numa}= | Get interfaces numa node | ${dut_node} | | ... | ${dut1_if1} | ${dut1_if2} | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${TRUE} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 @@ -1879,10 +2351,7 @@ | | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} | | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${duts_prefix} | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -1901,7 +2370,6 @@ | | ... | ${dut2_dut1_address} | ${duts_prefix} | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | | ... | ${dut2_tg_address} | ${duts_prefix} -| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | [Documentation] | Setup Lisp GPE IPv4 forwarding over IPsec. @@ -1959,6 +2427,7 @@ | | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} | | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${prefix} | | ... +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -2006,10 +2475,7 @@ | | ... | ${dut2_dut1_ip6_address} | ${dut2_tg_ip4_address} | | ... | ${prefix4} | ${prefix6} | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -2057,10 +2523,7 @@ | | ... | ${dut2_dut1_ip4_address} | ${dut2_tg_ip6_address} | | ... | ${prefix6} | ${prefix4} | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | Set interfaces in path up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -2089,11 +2552,7 @@ | | ... | - create routes | | ... | - set NAT44 - only on DUT1 | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up -| | All Vpp Interfaces Ready Wait | ${nodes} +| | Set interfaces in path up | | ... | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20 | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 11.0.0.1 | 20 @@ -2133,21 +2592,21 @@ | | ... | Socket paths for Memif are defined in following format: | | ... | - /tmp/memif-DUT1_VNF${number}-${sid} | | ... +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 xconnect for 1 Memif in 3-node circular topology \| +| | ... | \| Initialize L2 xconnect for 1 memif pairs in 3-node circular \ +| | ... | topology \| | | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 | | | ${sock1}= | Set Variable | memif-DUT1_VNF | | | ${sock2}= | Set Variable | memif-DUT1_VNF | | | ${prev_index}= | Evaluate | ${number}-1 | | | Set up memif interfaces on DUT node | ${dut1} | | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 -| | | ... | dut1-memif-${number}-if2 +| | | ... | dut1-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} | | | ... | ${dut1-memif-${prev_index}-if2} | | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1} @@ -2156,7 +2615,7 @@ | | | ${sock2}= | Set Variable | memif-DUT2_VNF | | | Set up memif interfaces on DUT node | ${dut2} | | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 -| | | ... | dut2-memif-${number}-if2 +| | | ... | dut2-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} | | | ... | ${dut2-memif-${prev_index}-if2} | | | Configure L2XC | ${dut2} | ${dut2_xconnect_if1} @@ -2165,6 +2624,8 @@ | | | ... | ${dut1} | ${dut1-memif-${number}-if2} | ${dut1_if2} | | | Run Keyword If | ${number}==${nr} | Configure L2XC | | | ... | ${dut2} | ${dut2-memif-${number}-if2} | ${dut2_if2} +| | Set interfaces in path up +| | Show Memif on all DUTs | ${nodes} | Initialize L2 Bridge Domain for '${nr}' memif pairs in 3-node circular topology | | [Documentation] @@ -2194,7 +2655,7 @@ | | | ${sock2}= | Set Variable | memif-DUT1_VNF | | | Set up memif interfaces on DUT node | ${dut1} | | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 -| | | ... | dut1-memif-${number}-if2 +| | | ... | dut1-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | ${bd_id2}= | Evaluate | ${number}+1 | | | Add interface to bridge domain | ${dut1} | | | ... | ${dut1-memif-${number}-if1} | ${number} @@ -2204,9 +2665,112 @@ | | | ${sock2}= | Set Variable | memif-DUT2_VNF | | | Set up memif interfaces on DUT node | ${dut2} | | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 -| | | ... | dut2-memif-${number}-if2 +| | | ... | dut2-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | Add interface to bridge domain | ${dut2} | | | ... | ${dut2-memif-${number}-if1} | ${number} | | | Add interface to bridge domain | ${dut2} | | | ... | ${dut2-memif-${number}-if2} | ${bd_id2} +| | Set interfaces in path up +| | Show Memif on all DUTs | ${nodes} + +| Initialize L2 xconnect for single memif in 3-node circular topology +| | [Documentation] +| | ... | Create single Memif interface on all defined VPP nodes. Cross +| | ... | connect Memif interface with one physical interface. +| | ... +| | ... | *Arguments:* +| | ... | - ${number} - Memif ID. Type: integer +| | ... +| | ... | *Note:* +| | ... | Socket paths for Memif are defined in following format: +| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 xconnect for single memif in 3-node circular \ +| | ... | topology \| 1 \| +| | ... +| | [Arguments] | ${number}=${1} +| | ${sock}= | Set Variable | memif-DUT1_VNF +| | Set up single memif interface on DUT node | ${dut1} | ${sock} +| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1-memif-${number}-if1} +| | ${sock}= | Set Variable | memif-DUT2_VNF +| | Set up single memif interface on DUT node | ${dut2} | ${sock} +| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2-memif-${number}-if1} +| | All Vpp Interfaces Ready Wait | ${nodes} +| | Show Memif on all DUTs | ${nodes} +| Initialize L2 Bridge Domain for single memif in 3-node circular topology +| | [Documentation] +| | ... | Create single Memif interface on all defined VPP nodes. Put Memif +| | ... | interface to separate L2 bridge domain with one physical interface. +| | ... +| | ... | *Arguments:* +| | ... | - ${number} - Memif ID. Type: integer +| | ... +| | ... | *Note:* +| | ... | Socket paths for Memif are defined in following format: +| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 Bridge Domain for single memif in 3-node circular \ +| | ... | topology \| 1 \| +| | ... +| | [Arguments] | ${number}=${1} +| | ${sock}= | Set Variable | memif-DUT1_VNF +| | Set up single memif interface on DUT node | ${dut1} | ${sock} +| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${number} +| | Add interface to bridge domain | ${dut1} | ${dut1-memif-${number}-if1} +| | ... | ${number} +| | ${sock}= | Set Variable | memif-DUT2_VNF +| | Set up single memif interface on DUT node | ${dut2} | ${sock} +| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${number} +| | Add interface to bridge domain | ${dut2} | ${dut2-memif-${number}-if1} +| | ... | ${number} +| | All Vpp Interfaces Ready Wait | ${nodes} +| | Show Memif on all DUTs | ${nodes} + +| Configure ACLs on a single interface +| | [Documentation] +| | ... | Configure ACL +| | ... +| | ... | *Arguments:* +| | ... | - dut - DUT node. Type: string +| | ... | - dut_if - DUT node interface name. Type: string +| | ... | - acl_apply_type - To what path apply the ACL - input or output. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. +| | ... | - subnets - Subnets to apply the specific ACL. Type: list +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']} +| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0 +| | ... +| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action} +| | ... | @{subnets} +| | Set Test variable | ${acl} | ${EMPTY} +| | :FOR | ${subnet} | IN | @{subnets} +| | | ${acl} = | Run Keyword If | '${acl}' == '${EMPTY}' +| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet} +| | | ... | ELSE +| | | ... | Catenate | SEPARATOR=, | ${acl} +| | | ... | ipv4 ${acl_action} src ${subnet} +| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} +| | @{acl_list} = | Create List | ${0} +| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type} +| | ... | ${acl_list}