X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_configuration.robot;h=f5ca1e7705a8351fe2592f7519b5cbfd83edcaff;hp=0b7eafa761642704524eb816367f8ab21a0ed98f;hb=1e2e2be1c90c83a6b9b4283f285bc89a5ece64ec;hpb=9d62c4fa8023daaf4aa6426b9648279df51dad03 diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 0b7eafa761..f5ca1e7705 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -29,10 +29,12 @@ | Resource | resources/libraries/robot/shared/counters.robot | Resource | resources/libraries/robot/l2/l2_bridge_domain.robot | Resource | resources/libraries/robot/l2/l2_xconnect.robot +| Resource | resources/libraries/robot/l2/l2_patch.robot | Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/ip/ip6.robot | Resource | resources/libraries/robot/vm/qemu.robot | Resource | resources/libraries/robot/l2/tagging.robot +| Resource | resources/libraries/robot/overlay/srv6.robot | Documentation | Performance suite keywords - configuration. *** Keywords *** @@ -68,17 +70,12 @@ | | ... | | VPP Show Crypto Device Mapping | ${dut1} | | VPP Show Crypto Device Mapping | ${dut2} -| | Set interfaces in path in 3-node circular topology up | | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if1_mac}= | Get Interface MAC | ${dut1} | ${dut1_if1} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | ${dut2_if2_mac}= | Get Interface MAC | ${dut2} | ${dut2_if2} -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up | | Set Test Variable | ${tg_if1_mac} | | Set Test Variable | ${tg_if2_mac} | | Set Test Variable | ${dut1_if1_mac} @@ -100,50 +97,55 @@ | | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | ${tg_if1_ip4} | ${dut1_if1} | | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | ${tg_if2_ip4} | ${dut2_if2} -| Initialize IPv4 forwarding in 3-node circular topology +| Initialize IPv4 forwarding in 2-node circular topology | | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular | | ... | topology. Get the interface MAC addresses and setup ARP on all VPP | | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and -| | ... | /30 prefix on DUT1-DUT2 link. Set routing on both DUT nodes with -| | ... | prefix /24 and next hop of neighbour DUT interface IPv4 address. +| | ... | /30 prefix on DUT1 link. | | ... | | Set Interface State | ${dut1} | ${dut1_if1} | up | | Set Interface State | ${dut1} | ${dut1_if2} | up -| | Set Interface State | ${dut2} | ${dut2_if1} | up -| | Set Interface State | ${dut2} | ${dut2_if2} | up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} -| | dut1_v4.set_arp | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} -| | dut2_v4.set_arp | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} -| | dut2_v4.set_arp | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} -| | dut1_v4.set_ip | ${dut1_if1} | 10.10.10.1 | 24 -| | dut1_v4.set_ip | ${dut1_if2} | 1.1.1.1 | 30 -| | dut2_v4.set_ip | ${dut2_if1} | 1.1.1.2 | 30 -| | dut2_v4.set_ip | ${dut2_if2} | 20.20.20.1 | 24 -| | dut1_v4.set_route | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} -| | dut2_v4.set_route | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} +| | ... | 10.10.10.1 | 24 +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} +| | ... | 20.20.20.1 | 24 | | All Vpp Interfaces Ready Wait | ${nodes} -| Initialize IPv4 forwarding in 2-node circular topology +| Initialize IPv4 forwarding in 3-node circular topology | | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular +| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular | | ... | topology. Get the interface MAC addresses and setup ARP on all VPP | | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and -| | ... | /30 prefix on DUT1 link. Set routing on DUT node with prefix /24 and -| | ... | next hop of neighbour DUT interface IPv4 address. +| | ... | /30 prefix on DUT1-DUT2 link. Set routing on both DUT nodes with +| | ... | prefix /24 and next hop of neighbour DUT interface IPv4 address. | | ... | | Set Interface State | ${dut1} | ${dut1_if1} | up | | Set Interface State | ${dut1} | ${dut1_if2} | up +| | Set Interface State | ${dut2} | ${dut2_if1} | up +| | Set Interface State | ${dut2} | ${dut2_if2} | up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.3 | ${tg1_if1_mac} -| | dut1_v4.set_arp | ${dut1_if2} | 20.20.20.3 | ${tg1_if2_mac} -| | dut1_v4.set_ip | ${dut1_if1} | 10.10.10.2 | 24 -| | dut1_v4.set_ip | ${dut1_if2} | 20.20.20.2 | 24 +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} +| | ... | 10.10.10.1 | 24 +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} +| | ... | 1.1.1.1 | 30 +| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} +| | ... | 1.1.1.2 | 30 +| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} +| | ... | 20.20.20.1 | 24 +| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} +| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} | | All Vpp Interfaces Ready Wait | ${nodes} | Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -237,29 +239,29 @@ | | Set Interface State | ${dut2} | ${dut2_vif1} | up | | Set Interface State | ${dut2} | ${dut2_vif2} | up | | Add Fib Table | ${dut1} | ${fib_table_1} -| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=4.4.4.2 | interface=${dut1_vif1} | multipath=${TRUE} +| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} +| | ... | gateway=4.4.4.2 | interface=${dut1_vif1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_1} | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} +| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} +| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=5.5.5.2 | interface=${dut1_vif2} | multipath=${TRUE} +| | ... | gateway=5.5.5.2 | interface=${dut1_vif2} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_1} | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} +| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_1} | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=4.4.4.1 | interface=${dut2_vif1} | multipath=${TRUE} +| | ... | gateway=4.4.4.1 | interface=${dut2_vif1} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_2} | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=5.5.5.2 | interface=${dut2_vif2} | multipath=${TRUE} +| | ... | gateway=5.5.5.2 | interface=${dut2_vif2} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_2} | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} +| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_vif1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} @@ -353,16 +355,16 @@ | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nr} | | Add Fib Table | ${dut1} | ${fib_table_1} | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} +| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} +| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_1} | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} +| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_2} | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} +| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} | | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1} @@ -411,19 +413,19 @@ | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up | | | Add Fib Table | ${dut1} | ${fib_table_1} | | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1_vif1} +| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1} | | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut1} | ${fib_table_2} | | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1_vif2} +| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2} | | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut2} | ${fib_table_1} | | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut2_vif1} +| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut2-vhost-${number}-if1} | | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut2} | ${fib_table_2} | | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut2_vif2} +| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut2-vhost-${number}-if2} | | | ... | multipath=${TRUE} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} | | | ... | ${fib_table_1} @@ -511,6 +513,23 @@ | | Policer Classify Set Match IP | 10.10.10.2 | ${False} | | Policer Set Configuration +| Initialize IPv6 forwarding in 2-node circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular +| | ... | topology. Get the interface MAC addresses and setup neighbour on all +| | ... | VPP interfaces. Setup IPv6 addresses with /128 prefixes on all +| | ... | interfaces. +| | ... +| | ${prefix}= | Set Variable | 64 +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:1::1 | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | 2001:2::1 | ${prefix} +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} +| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | 2001:2::2 | ${tg1_if2_mac} +| | All Vpp Interfaces Ready Wait | ${nodes} + | Initialize IPv6 forwarding in 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular @@ -535,6 +554,7 @@ | | Add Ip Neighbor | ${dut2} | ${dut2_if1} | 2001:3::1 | ${dut1_if2_mac} | | Vpp Route Add | ${dut1} | 2001:2::0 | ${prefix} | 2001:3::2 | ${dut1_if2} | | Vpp Route Add | ${dut2} | 2001:1::0 | ${prefix} | 2001:3::1 | ${dut2_if1} +| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize IPv6 forwarding with scaling in 3-node circular topology | | [Documentation] @@ -577,6 +597,7 @@ | | ... | interface=${dut2_if1} | count=${count} | | Vpp Route Add | ${dut2} | 2001:2::0 | ${host_prefix} | 2001:5::2 | | ... | interface=${dut2_if2} | count=${count} +| | All Vpp Interfaces Ready Wait | ${nodes} | Initialize IPv6 iAcl whitelist in 3-node circular topology | | [Documentation] @@ -598,6 +619,211 @@ | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip6 | ${table_idx} +| Initialize IPv6 forwarding over SRv6 with encapsulation with '${n}' x SID '${prepos}' decapsulation in 3-node circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular +| | ... | topology. Get the interface MAC addresses and setup neighbours on all +| | ... | VPP interfaces. Setup IPv6 addresses on all interfaces. Set segment +| | ... | routing for IPv6 for required number of SIDs and configure IPv6 routes +| | ... | on both DUT nodes. +| | ... +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2 +| | | ${hexa_nr}= | Convert To Hex | ${number} +| | | Add Ip Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} +| | | ... | ${tg1_if1_mac} +| | | Add Ip Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} +| | | ... | ${tg1_if2_mac} +| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} +| | ${sid1}= | Set Variable If +| | ... | "${n}" == "1" | ${dut2_sid1} +| | ... | "${n}" == "2" | ${dut2_sid1_1} +| | ${sid2}= | Set Variable If +| | ... | "${n}" == "1" | ${dut1_sid2} +| | ... | "${n}" == "2" | ${dut1_sid2_1} +| | Vpp Route Add | ${dut1} | ${sid1} | ${sid_prefix} | ${dut2_if1_ip6} +| | ... | ${dut1_if2} +| | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | ${dut1_if2_ip6} +| | ... | ${dut2_if1} +# Configure SRv6 for direction0 +| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} +| | @{sid_list_dir0}= | Run Keyword If | "${n}" == "1" +| | ... | Create List | ${dut2_sid1} +| | ... | ELSE IF | "${n}" == "2" +| | ... | Create List | ${dut2_sid1_1} | ${dut2_sid1_2} +| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap +| | ... | @{sid_list_dir0} +| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} +| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} +| | Run Keyword If | "${n}" == "1" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.dx6 +| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2 +| | Run Keyword If | "${n}" == "2" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_1} | end +| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_2} | end.dx6 +| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2 +| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" +| | ... | Vpp Route Add | ${dut2} | ${dut2_sid1_2} | ${sid_prefix} +| | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2} +# Configure SRv6 for direction1 +| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} +| | @{sid_list_dir1}= | Run Keyword If | "${n}" == "1" +| | ... | Create List | ${dut1_sid2} +| | ... | ELSE IF | "${n}" == "2" +| | ... | Create List | ${dut1_sid2_1} | ${dut1_sid2_2} +| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap +| | ... | @{sid_list_dir1} +| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} +| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} +| | Run Keyword If | "${n}" == "1" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.dx6 +| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2 +| | Run Keyword If | "${n}" == "2" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_1} | end +| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_2} | end.dx6 +| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2 +| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" +| | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix} +| | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1} + +| Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via '${behavior}' behaviour in 3-node circular topology +| | [Documentation] +| | ... | Create pair of Memif interfaces on all defined VPP nodes. Set UP +| | ... | state on VPP interfaces in path on nodes in 3-node circular topology. +| | ... | Get the interface MAC addresses and setup neighbours on all VPP +| | ... | interfaces. Setup IPv6 addresses on all interfaces. Set segment +| | ... | routing for IPv6 with defined behaviour function and configure IPv6 +| | ... | routes on both DUT nodes. +| | ... +| | ... | *Note:* +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ${sock1}= | Set Variable | memif-DUT1_VNF +| | ${sock2}= | Set Variable | memif-DUT2_VNF +| | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} +| | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Set up memif interfaces on DUT node | ${dut2} | ${sock2} | ${sock2} +| | ... | ${1} | dut2-memif-1-if1 | dut2-memif-1-if2 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Show Memif | ${nodes['${dut}']} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1-memif-1-if1} +| | ... | ${dut1-memif-1-if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1-memif-1-if2} +| | ... | ${dut1-memif-1-if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2-memif-1-if1} +| | ... | ${dut2-memif-1-if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2-memif-1-if2} +| | ... | ${dut2-memif-1-if2_ip6} | ${prefix} +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} +| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 +| | ... | ${tg1_if1_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 +| | ... | ${tg1_if2_mac} +| | ${dut1-memif-1-if2_mac}= | Get Interface MAC | ${dut1} | memif2 +| | ${dut2-memif-1-if2_mac}= | Get Interface MAC | ${dut2} | memif2 +| | Add Ip Neighbor | ${dut1} | ${dut1-memif-1-if1} | ${dut1_nh} +| | ... | ${dut1-memif-1-if2_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2-memif-1-if1} | ${dut2_nh} +| | ... | ${dut2-memif-1-if2_mac} +| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix} | ${dut2_if1_ip6} +| | ... | ${dut1_if2} +| | Vpp Route Add | ${dut1} | ${out_sid2_1} | ${sid_prefix} +| | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1} +| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix} | ${dut1_if2_ip6} +| | ... | ${dut2_if1} +| | Vpp Route Add | ${dut2} | ${out_sid1_1} | ${sid_prefix} +| | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2} +# Configure SRv6 for direction0 on DUT1 +| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} +| | @{sid_list_dir0}= | Create List | ${dut2_sid1} | ${out_sid1_1} +| | ... | ${out_sid1_2} +| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap +| | ... | @{sid_list_dir0} +| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} +| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} +# Configure SRv6 for direction1 on DUT2 +| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} +| | @{sid_list_dir1}= | Create List | ${dut1_sid2} | ${out_sid2_1} +| | ... | ${out_sid2_2} +| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap +| | ... | @{sid_list_dir1} +| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} +| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} +# Configure SRv6 for direction0 on DUT2 +| | ${dut2_out_if}= | Get Interface Name | ${dut2} | memif1 +| | ${dut2_in_if}= | Get Interface Name | ${dut2} | memif2 +| | Remove Values From List | ${sid_list_dir0} | ${dut2_sid1} +| | Run Keyword If | "${behavior}" == "static_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.as +| | ... | ${NONE} | ${dut2_nh} | ${NONE} | ${dut2_out_if} | ${dut2_in_if} +| | ... | ${dut1_sid1} | @{sid_list_dir0} +| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.ad +| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} +| | ... | ELSE IF | "${behavior}" == "masquerading" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.am +| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} +| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} +# Configure SRv6 for direction1 on DUT1 +| | ${dut1_out_if}= | Get Interface Name | ${dut1} | memif1 +| | ${dut1_in_if}= | Get Interface Name | ${dut1} | memif2 +| | Remove Values From List | ${sid_list_dir1} | ${dut1_sid2} +| | Run Keyword If | "${behavior}" == "static_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.as +| | ... | ${NONE} | ${dut1_nh} | ${NONE} | ${dut1_out_if} | ${dut1_in_if} +| | ... | ${dut2_sid2} | @{sid_list_dir1} +| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.ad +| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} +| | ... | ELSE IF | "${behavior}" == "masquerading" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.am +| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} +| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} +| | All Vpp Interfaces Ready Wait | ${nodes} + +| Initialize L2 patch +| | [Documentation] +| | ... | Setup L2 patch topology by cross connecting two interfaces on +| | ... | each DUT. Interfaces are brought up. +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Configure L2patch | ${nodes['${dut}']} | ${${dut}_if1} | ${${dut}_if2} +| | All Vpp Interfaces Ready Wait | ${nodes} + +| Initialize L2 xconnect in 2-node circular topology +| | [Documentation] +| | ... | Setup L2 xconnect topology by cross connecting two interfaces on +| | ... | each DUT. Interfaces are brought up. +| | ... +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | All Vpp Interfaces Ready Wait | ${nodes} + | Initialize L2 xconnect in 3-node circular topology | | [Documentation] | | ... | Setup L2 xconnect topology by cross connecting two interfaces on @@ -738,6 +964,117 @@ | | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} | | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} +| Initialize L2 xconnect with Vhost-User and VLAN with DPDK link bonding in 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Setup VLAN +| | ... | on BondEthernet interfaces between DUTs. Cross connect one Vhost +| | ... | interface with physical interface towards TG and other Vhost interface +| | ... | with VLAN sub-interface. All interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 xconnect with Vhost-User and VLAN with DPDK link\ +| | ... | bonding in 3-node circular topology \| /tmp/sock1 \| /tmp/sock2 \ +| | ... | \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} +| | ... +| | Set interfaces in path in 3-node circular topology up +| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} +| | ... | ${subid} +| | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} +| | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} +| | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} +| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} + +| Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Create one +| | ... | link bonding (BondEthernet) interface on both VPP nodes. Enslave one +| | ... | physical interface towards next DUT by BondEthernet interface. Setup +| | ... | VLAN on BondEthernet interfaces between DUTs. Cross connect one Vhost +| | ... | interface with physical interface towards TG and other Vhost interface +| | ... | with VLAN sub-interface. All interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string +| | ... | - sock2 - Socket path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... | - bond_mode - Link bonding mode. Type: string +| | ... | - lb_mode - Load balance mode. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 xconnect with Vhost-User and VLAN with VPP link\ +| | ... | bonding in 3-node circular topology \| /tmp/sock1 \| /tmp/sock2 \ +| | ... | \| 10 \| pop-1 \| \| xor \| l34 \| +| | ... +| | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | ${bond_mode} +| | ... | ${lb_mode} +| | ... +| | Set interfaces in path in 3-node circular topology up +| | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} +| | ... | ${lb_mode} +| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} +| | ... | ${lb_mode} +| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ... | ${dut2_eth_bond_if1} +| | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} +| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} +| | ... | ${subid} +| | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} +| | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} +| | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} +| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} + +| Initialize L2 bridge domain in 2-node circular topology +| | [Documentation] +| | ... | Setup L2 DB topology by adding two interfaces on DUT into BD +| | ... | that is created automatically with index 1. Learning is enabled. +| | ... | Interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id - Bridge domain ID. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 bridge domain in 2-node circular topology \| 1 \| +| | ... +| | [Arguments] | ${bd_id}=${1} +| | ... +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} +| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} +| | All Vpp Interfaces Ready Wait | ${nodes} + | Initialize L2 bridge domain in 3-node circular topology | | [Documentation] | | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD @@ -792,7 +1129,7 @@ | | ... | - ${trex_stream2_subnet} - IP subnet used by T-Rex in direction 1->0. | | ... | Type: string | | ... -| | [Arguments] | ${dut} | ${dut_if1}=${None} | ${dut_if2}=${None} +| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} | | ${src_ip_int} = | Evaluate | | ... | int(ipaddress.ip_address(unicode($src_ip_start))) - $ip_step | | ... | modules=ipaddress @@ -807,40 +1144,40 @@ | | ${port_limit}= | Set Variable | ${65535} | | ${acl}= | Set Variable | ipv4 permit | | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number} -| | | ${src_ip_int} = | Evaluate | $src_ip_int + $ip_step -| | | ${dst_ip_int} = | Evaluate | $dst_ip_int + $ip_step -| | | ${sport}= | Evaluate | $sport + $port_step -| | | ${dport}= | Evaluate | $dport + $port_step -| | | ${ipv4_limit_reached}= | Set Variable If -| | | ... | $src_ip_int > $ip_limit_int or $src_ip_int > $ip_limit_int -| | | ... | ${True} -| | | ${udp_limit_reached}= | Set Variable If -| | | ... | $sport > $port_limit or $dport > $port_limit | ${True} -| | | Run Keyword If | $ipv4_limit_reached is True | Log -| | | ... | Can't do more iterations - IPv4 address limit has been reached. -| | | ... | WARN -| | | Run Keyword If | $udp_limit_reached is True | Log -| | | ... | Can't do more iterations - UDP port limit has been reached. -| | | ... | WARN -| | | ${src_ip} = | Run Keyword If | $ipv4_limit_reached is True -| | | ... | Set Variable | ${ip_limit} -| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($src_ip_int)) -| | | ... | modules=ipaddress -| | | ${dst_ip} = | Run Keyword If | $ipv4_limit_reached is True -| | | ... | Set Variable | ${ip_limit} -| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($dst_ip_int)) -| | | ... | modules=ipaddress -| | | ${sport}= | Set Variable If | ${sport} > $port_limit | $port_limit -| | | ... | ${sport} -| | | ${dport}= | Set Variable If | ${dport} > $port_limit | $port_limit -| | | ... | ${dport} -| | | ${acl}= | Catenate | ${acl} | src ${src_ip}/32 dst ${dst_ip}/32 -| | | ... | sport ${sport} | dport ${dport}, -| | | Exit For Loop If -| | | ... | $ipv4_limit_reached is True or $udp_limit_reached is True +| | | ${src_ip_int} = | Evaluate | $src_ip_int + $ip_step +| | | ${dst_ip_int} = | Evaluate | $dst_ip_int + $ip_step +| | | ${sport}= | Evaluate | $sport + $port_step +| | | ${dport}= | Evaluate | $dport + $port_step +| | | ${ipv4_limit_reached}= | Set Variable If +| | | ... | $src_ip_int > $ip_limit_int or $src_ip_int > $ip_limit_int +| | | ... | ${TRUE} +| | | ${udp_limit_reached}= | Set Variable If +| | | ... | $sport > $port_limit or $dport > $port_limit | ${TRUE} +| | | Run Keyword If | $ipv4_limit_reached is True | Log +| | | ... | Can't do more iterations - IPv4 address limit has been reached. +| | | ... | WARN +| | | Run Keyword If | $udp_limit_reached is True | Log +| | | ... | Can't do more iterations - UDP port limit has been reached. +| | | ... | WARN +| | | ${src_ip} = | Run Keyword If | $ipv4_limit_reached is True +| | | ... | Set Variable | ${ip_limit} +| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($src_ip_int)) +| | | ... | modules=ipaddress +| | | ${dst_ip} = | Run Keyword If | $ipv4_limit_reached is True +| | | ... | Set Variable | ${ip_limit} +| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($dst_ip_int)) +| | | ... | modules=ipaddress +| | | ${sport}= | Set Variable If | ${sport} > $port_limit | $port_limit +| | | ... | ${sport} +| | | ${dport}= | Set Variable If | ${dport} > $port_limit | $port_limit +| | | ... | ${dport} +| | | ${acl}= | Catenate | ${acl} | src ${src_ip}/32 dst ${dst_ip}/32 +| | | ... | sport ${sport} | dport ${dport}, +| | | Exit For Loop If +| | | ... | $ipv4_limit_reached is True or $udp_limit_reached is True | | ${acl}= | Catenate | ${acl} -| | ... | ipv4 ${acl_action} src ${trex_stream1_subnet}, -| | ... | ipv4 ${acl_action} src ${trex_stream2_subnet} +| | ... | ipv4 ${acl_action} src ${trex_stream1_subnet}, +| | ... | ipv4 ${acl_action} src ${trex_stream2_subnet} | | Add Replace Acl Multi Entries | ${dut} | rules=${acl} | | @{acl_list}= | Create List | ${0} | | Run Keyword If | 'input' in $acl_apply_type and $dut_if1 is not None @@ -970,7 +1307,7 @@ | | ... | - ${tg_mac_mask} - MAC address mask for traffic streams. | | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string | | ... -| | [Arguments] | ${dut} | ${dut_if1}=${None} | ${dut_if2}=${None} +| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} | | ... | | ${src_ip_int} = | IP To Int | ${src_ip_start} | | ${src_ip_int} = | Evaluate | ${src_ip_int} - ${ip_step} @@ -1207,6 +1544,75 @@ | | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on one VPP node. Add each +| | ... | Vhost-User interface into L2 bridge domains with learning enabled +| | ... | one connected to physical interface, the other to VXLAN. +| | ... | Setup VXLANoIPv4 between DUTs and TG by connecting physical and vxlan +| | ... | interfaces on the DUT. All interfaces are brought up. +| | ... | IPv4 addresses with prefix /24 are configured on interfaces between +| | ... | DUT and TG. +| | ... +| | ... | *Arguments:* +| | ... | - dut1_address - Address of physical interface on DUT1. Type: string +| | ... | - dut1_address_subnet - Subnet of the address of physical interface on +| | ... | DUT1. Type: string +| | ... | - dut2_address - Address of physical interface on DUT2. Type: string +| | ... | - dut2_address_subnet - Subnet of the address of physical interface on +| | ... | DUT2. Type: string +| | ... | - dut1_gw - Address of the _gateway_ to which the traffic will be +| | ... | forwarded on DUT1. Type: string +| | ... | - dut2_gw - Address of the _gateway_ to which the traffic will be +| | ... | forwarded on DUT2. Type: string +| | ... | - dut1_vxlans - List of VXLAN params to be configured on DUT1. +| | ... | Type: list of dicts, dict params vni, vtep +| | ... | - dut2_vxlans - List of VXLAN params to be configured on DUT2. +| | ... | Type: list of dicts, dict params vni, vtep +| | ... | - dut1_route_subnet - Subnet address to forward to _gateway_ on DUT1. +| | ... | Type: string +| | ... | - dut1_route_mask - Subnet address mask to forward to _gateway_ +| | ... | on DUT1. Type: string +| | ... | - dut2_route_subnet - Subnet address to forward to _gateway_ on DUT2. +| | ... | Type: string +| | ... | - dut2_route_mask - Subnet address mask to forward to _gateway_ +| | ... | on DUT2. Type: string +| | ... +| | ... | *Example:* +| | ... +| | [Arguments] | ${dut1_address} | ${dut1_address_subnet} | +| | ... | ${dut2_address} | ${dut2_address_subnet} | ${dut1_gw} | ${dut2_gw} | +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | ${dut1_route_subnet} | +| | ... | ${dut1_route_mask} | ${dut2_route_subnet} | ${dut2_route_mask} +| | ... +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | +| | ... | ${dut1_address} | ${dut1_address_subnet} +| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | +| | ... | ${dut2_address} | ${dut2_address_subnet} +| | ${dut1_bd_id1}= | Set Variable | 1 +| | ${dut1_bd_id2}= | Set Variable | 2 +| | ${dut2_bd_id1}= | Set Variable | 1 +| | :FOR | ${vxlan} | IN | @{dut1_vxlans} +| | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | ${vxlan.vni} +| | | ... | ${dut1_address} | ${vxlan.vtep} +| | | Add interface to bridge domain | ${dut1} | ${dut1s_vxlan} | ${dut1_bd_id1} +| | :FOR | ${vxlan} | IN | @{dut2_vxlans} +| | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | ${vxlan.vni} +| | | ... | ${dut2_address} | ${vxlan.vtep} +| | | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${dut2_bd_id1} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Add arp on dut | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | ${dut1_route_subnet} | ${dut1_route_mask} +| | ... | ${dut1_gw} | ${dut1_if1} +| | Vpp Route Add | ${dut2} | ${dut2_route_subnet} | ${dut2_route_mask} +| | ... | ${dut2_gw} | ${dut2_if2} +| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${dut1_bd_id2} +| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${dut2_bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${dut1_bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${dut1_bd_id2} + | Initialize L2 bridge domains with Vhost-User in 2-node circular topology | | [Documentation] | | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each @@ -1288,8 +1694,8 @@ | | ... | *Example:* | | ... | | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in a 3-node\ -| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| 10\ -| | ... | pop-1 \| +| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \| 10 \ +| | ... | \| pop-1 \| | | ... | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} | | ... | ${tag_rewrite} @@ -1313,24 +1719,161 @@ | | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| Add PCI devices to DUTs in 3-node single link topology +| Initialize L2 bridge domains with Vhost-User and VLAN with DPDK link bonding in a 3-node circular topology | | [Documentation] -| | ... | Add PCI devices to VPP configuration file. +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Setup VLAN +| | ... | on BondEthernet interfaces between DUTs. Add one Vhost-User interface +| | ... | into L2 bridge domains with learning enabled with physical interface +| | ... | towards TG and other Vhost-User interface into L2 bridge domains with +| | ... | learning enabled with VLAN sub-interface. All interfaces are brought +| | ... | up. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id1 - Bridge domain ID. Type: integer +| | ... | - bd_id2 - Bridge domain ID. Type: integer +| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string +| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 bridge domains with Vhost-User and VLAN with DPDK\ +| | ... | link bonding in a 3-node circular topology \| 1 \| 2 \| /tmp/sock1 \ +| | ... | \| /tmp/sock2 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} +| | ... | ${tag_rewrite} +| | ... +| | Set interfaces in path in 3-node circular topology up +| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} +| | ... | ${subid} +| | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} +| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} +| | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} +| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} +| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} + +| Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Create one +| | ... | link bonding (BondEthernet) interface on both VPP nodes. Enslave one +| | ... | physical interface towards next DUT by BondEthernet interface. Setup +| | ... | VLAN on BondEthernet interfaces between DUTs. Add one Vhost-User +| | ... | interface into L2 bridge domains with learning enabled with physical +| | ... | interface towards TG and other Vhost-User interface into L2 bridge +| | ... | domains with learning enabled with VLAN sub-interface. All interfaces +| | ... | are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id1 - Bridge domain ID. Type: integer +| | ... | - bd_id2 - Bridge domain ID. Type: integer +| | ... | - sock1 - Sock path for first Vhost-User interface. Type: string +| | ... | - sock2 - Sock path for second Vhost-User interface. Type: string +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... | - bond_mode - Link bonding mode. Type: string +| | ... | - lb_mode - Load balance mode. Type: string | | ... -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} | ${dut1_if2_pci} -| | Run keyword | DUT2.Add DPDK Dev | ${dut2_if1_pci} | ${dut2_if2_pci} +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 bridge domains with Vhost-User and VLAN with VPP\ +| | ... | link bonding in a 3-node circular topology \| 1 \| 2 \| /tmp/sock1 \ +| | ... | \| /tmp/sock2 \| 10 \| pop-1 \| xor \| l34 \| +| | ... +| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} +| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode} +| | ... +| | Set interfaces in path in 3-node circular topology up +| | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} +| | ... | ${lb_mode} +| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up +| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} +| | ... | ${lb_mode} +| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up +| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ... | ${dut2_eth_bond_if1} +| | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} +| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} +| | ... | ${subid} +| | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} +| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} +| | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | ... | ${sock1} | ${sock2} +| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} +| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} +| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} +| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| Add PCI devices to DUTs in 2-node single link topology +| Add PCI devices to all DUTs | | [Documentation] | | ... | Add PCI devices to VPP configuration file. | | ... -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} | ${dut1_if2_pci} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} +| | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} +| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} | ${if2_pci} +| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} +| | | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} + +| Add single PCI device to all DUTs +| | [Documentation] +| | ... | Add single (first) PCI device on DUT1 and single (last) PCI device on +| | ... | DUT2 to VPP configuration file. +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_pci}= | Run Keyword If | '${dut}' == 'DUT1' | Get Interface PCI Addr +| | | ... | ${nodes['${dut}']} | ${${dut}_if1} | ELSE | Get Interface PCI Addr +| | | ... | ${nodes['${dut}']} | ${${dut}_if2} +| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} +| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} + +| Add VLAN Strip Offload switch off between DUTs in 3-node single link topology +| | [Documentation] +| | ... | Add VLAN Strip Offload switch off on PCI devices between DUTs to VPP +| | ... | configuration file. +| | ... +| | Run keyword | DUT1.Add DPDK Dev Parameter | ${dut1_if2_pci} +| | ... | vlan-strip-offload | off +| | Run keyword | DUT2.Add DPDK Dev Parameter | ${dut2_if1_pci} +| | ... | vlan-strip-offload | off + +| Add DPDK bonded ethernet interfaces to DUTs in 3-node single link topology +| | [Documentation] +| | ... | Add DPDK bonded Ethernet interfaces with mode XOR and transmit policy +| | ... | l34 to VPP configuration file. +| | ... +| | Run keyword | DUT1.Add DPDK Eth Bond Dev | 0 | 2 | l34 | ${dut1_if2_pci} +| | Run keyword | DUT2.Add DPDK Eth Bond Dev | 0 | 2 | l34 | ${dut2_if1_pci} + +| Add DPDK bonded ethernet interfaces to topology file in 3-node single link topology +| | Add Bond Eth Interface | ${dut1} | ${dut1_eth_bond_if1_name} +| | Add Bond Eth Interface | ${dut2} | ${dut2_eth_bond_if1_name} | Configure guest VM with dpdk-testpmd connected via vhost-user | | [Documentation] @@ -1350,6 +1893,9 @@ | | ... | Type: integer | | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT node. | | ... | Type: integer +| | ... | - jumbo_frames - Set True if jumbo frames are used in the test. +| | ... | Type: bool +| | ... | - use_tuned_cfs - FIXME. | | ... | | ... | *Example:* | | ... @@ -1361,7 +1907,7 @@ | | ... | \| qemu_id=${2} \| | | ... | | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} -| | ... | ${count}=${5} | ${qemu_id}=${1} +| | ... | ${count}=${5} | ${qemu_id}=${1} | ${jumbo_frames}=${False} | | ... | | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id} | | ... | WITH NAME | ${vm_name} @@ -1375,12 +1921,17 @@ | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} | | ... | skip_cnt=${skip_cnt} | cpu_cnt=${count} | smt_used=${False} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} +| | ... | jumbo_frames=${jumbo_frames} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | ... | jumbo_frames=${jumbo_frames} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} +| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 @@ -1388,9 +1939,11 @@ | | ${vm}= | Run keyword | ${vm_name}.Qemu Start | | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy +| | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} | | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | eal_mem_channels=4 -| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${True} +| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE} | | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} +| | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} | Configure '${nr}' guest VMs with dpdk-testpmd connected via vhost-user in 3-node circular topology @@ -1405,10 +1958,12 @@ | | ... | - ${system_cpus} - Number of CPUs allocated for OS itself. | | ... | - ${vpp_cpus} - Number of CPUs allocated for VPP. | | ... | - ${vm_cpus} - Number of CPUs to be allocated per QEMU instance. +| | ... | - ${jumbo_frames} - Jumbo frames are used (True) or are not used +| | ... | (False) in the test. | | ... | | ... | *Example:* | | ... -| | ... | \| Configure '2' guest VMs with dpdk-testpmd connected via vhost-user \ +| | ... | \| Configure '2' guest VMs with dpdk-testpmd connected via vhost-user\ | | ... | in 3-node circular topology \| | | ... | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 @@ -1418,13 +1973,13 @@ | | | ${vm1}= | Configure guest VM with dpdk-testpmd connected via vhost-user | | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} | | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} +| | | ... | jumbo_frames=${jumbo_frames} | | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} | | | ${vm2}= | Configure guest VM with dpdk-testpmd connected via vhost-user | | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} | | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} +| | | ... | jumbo_frames=${jumbo_frames} | | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} -| | | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built} -| | | ... | ${True} | Configure guest VM with dpdk-testpmd using SMT connected via vhost-user | | [Documentation] @@ -1441,6 +1996,9 @@ | | ... | - vm_name - QemuUtil instance name. Type: string | | ... | - skip - number of cpus which will be skipped. Type: int | | ... | - count - number of cpus which will be allocated for qemu. Type: int +| | ... | - jumbo_frames - Set True if jumbo frames are used in the test. +| | ... | Type: bool +| | ... | - use_tuned_cfs - FIXME. | | ... | | ... | *Example:* | | ... @@ -1449,21 +2007,26 @@ | | ... | \| ${6} \| ${5} \| | | ... | | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | ${skip}=${6} -| | ... | ${count}=${5} +| | ... | ${count}=${5} | ${jumbo_frames}=${False} | | ... | | Import Library | resources.libraries.python.QemuUtils | | ... | WITH NAME | ${vm_name} | | ${dut_numa}= | Get interfaces numa node | ${dut_node} | | ... | ${dut1_if1} | ${dut1_if2} | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${TRUE} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} +| | ... | jumbo_frames=${jumbo_frames} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | ... | jumbo_frames=${jumbo_frames} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} +| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 @@ -1471,9 +2034,11 @@ | | ${vm}= | Run keyword | ${vm_name}.Qemu Start | | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy +| | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} | | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | eal_mem_channels=4 -| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${True} +| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE} | | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} +| | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} | Configure guest VM with dpdk-testpmd-mac connected via vhost-user @@ -1496,6 +2061,9 @@ | | ... | Type: integer | | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT node. | | ... | Type: integer +| | ... | - jumbo_frames - Set True if jumbo frames are used in the test. +| | ... | Type: bool +| | ... | - use_tuned_cfs - FIXME. | | ... | | ... | *Example:* | | ... @@ -1509,7 +2077,7 @@ | | ... | | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | | ... | ${eth0_mac} | ${eth1_mac} | ${skip}=${6} | ${count}=${5} -| | ... | ${qemu_id}=${1} +| | ... | ${qemu_id}=${1} | ${jumbo_frames}=${False} | | ... | | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id} | | ... | WITH NAME | ${vm_name} @@ -1523,12 +2091,17 @@ | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} | | ... | skip_cnt=${skip_cnt} | cpu_cnt=${count} | smt_used=${False} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} +| | ... | jumbo_frames=${jumbo_frames} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | ... | jumbo_frames=${jumbo_frames} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} +| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 @@ -1536,10 +2109,12 @@ | | ${vm}= | Run keyword | ${vm_name}.Qemu Start | | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy +| | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} | | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} -| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${True} +| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${TRUE} | | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} +| | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} | Configure '${nr}' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology @@ -1555,10 +2130,12 @@ | | ... | - ${system_cpus} - Number of CPUs allocated for OS itself. | | ... | - ${vpp_cpus} - Number of CPUs allocated for VPP. | | ... | - ${vm_cpus} - Number of CPUs to be allocated per QEMU instance. +| | ... | - ${jumbo_frames} - Jumbo frames are used (True) or are not used +| | ... | (False) in the test. | | ... | | ... | *Example:* | | ... -| | ... | \| Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user \ +| | ... | \| Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user\ | | ... | in 3-node circular topology \| | | ... | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 @@ -1571,6 +2148,7 @@ | | | ... | ${dut1-vhost-${number}-if1_mac} | | | ... | ${dut1-vhost-${number}-if2_mac} | skip=${skip_cpus} | | | ... | count=${vm_cpus} | qemu_id=${number} +| | | ... | jumbo_frames=${jumbo_frames} | | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} | | | ${vm2}= | | | ... | Configure guest VM with dpdk-testpmd-mac connected via vhost-user @@ -1578,9 +2156,8 @@ | | | ... | ${dut2-vhost-${number}-if1_mac} | | | ... | ${dut2-vhost-${number}-if2_mac} | skip=${skip_cpus} | | | ... | count=${vm_cpus} | qemu_id=${number} +| | | ... | jumbo_frames=${jumbo_frames} | | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} -| | | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built} -| | | ... | ${True} | Configure guest VM with dpdk-testpmd-mac using SMT connected via vhost-user | | [Documentation] @@ -1599,6 +2176,9 @@ | | ... | - eth1_mac - MAC address of second Vhost interface. Type: string | | ... | - skip - number of cpus which will be skipped. Type: int | | ... | - count - number of cpus which will be allocated for qemu. Type: int +| | ... | - jumbo_frames - Set True if jumbo frames are used in the test. +| | ... | Type: bool +| | ... | - use_tuned_cfs - FIXME. | | ... | | ... | *Example:* | | ... @@ -1608,20 +2188,26 @@ | | ... | | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} | | ... | ${eth0_mac} | ${eth1_mac} | ${skip}=${6} | ${count}=${5} +| | ... | ${jumbo_frames}=${False} | | ... | | Import Library | resources.libraries.python.QemuUtils | | ... | WITH NAME | ${vm_name} | | ${dut_numa}= | Get interfaces numa node | ${dut_node} | | ... | ${dut1_if1} | ${dut1_if2} | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${TRUE} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} +| | ... | jumbo_frames=${jumbo_frames} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} +| | ... | jumbo_frames=${jumbo_frames} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} +| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 @@ -1629,10 +2215,12 @@ | | ${vm}= | Run keyword | ${vm_name}.Qemu Start | | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus} | | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy +| | ${max_pkt_len}= | Set Variable If | ${jumbo_frames} | 9000 | ${EMPTY} | | Dpdk Testpmd Start | ${vm} | eal_coremask=0x1f | | ... | eal_mem_channels=4 | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} -| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${True} +| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${TRUE} | | ... | pmd_txd=${perf_qemu_qsz} | pmd_rxd=${perf_qemu_qsz} +| | ... | pmd_max_pkt_len=${max_pkt_len} | | Return From Keyword | ${vm} | Configure guest VM with linux bridge connected via vhost-user @@ -1666,10 +2254,13 @@ | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} +| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 @@ -1712,14 +2303,17 @@ | | ${dut_numa}= | Get interfaces numa node | ${dut_node} | | ... | ${dut1_if1} | ${dut1_if2} | | ${qemu_cpus}= | Cpu slice of list per node | ${dut_node} | ${dut_numa} -| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${True} +| | ... | skip_cnt=${skip} | cpu_cnt=${count} | smt_used=${TRUE} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False} -| | ... | ${True} -| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node} -| | ... | force_install=${True} | apply_patch=${apply_patch} -| | Run keyword | ${vm_name}.Qemu Set Bin | ${perf_qemu_bin} +| | ... | ${TRUE} +| | ${perf_qemu_path}= | Set Variable If | ${apply_patch} +| | ... | ${perf_qemu_path}-patch/bin/ +| | ... | ${perf_qemu_path}-base/bin/ +| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node} +| | ... | apply_patch=${apply_patch} +| | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path} | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node} | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1 | | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048 @@ -1814,6 +2408,7 @@ | | ... | ${dut2} | ${dut2_if1} | ${encr_alg} | ${encr_key} | | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Set interfaces in path in 3-node circular topology up | Initialize LISP IPv6 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv6 topology on all DUT nodes \ @@ -2009,41 +2604,46 @@ | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${number}-1 -| | ... | - /tmp/memif-${number}-2 +| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 xconnect for 1 Memif in 3-node circular topology \| +| | ... | \| Initialize L2 xconnect for 1 memif pairs in 3-node circular \ +| | ... | topology \| | | ... | | Set Interface State | ${dut1} | ${dut1_if1} | up | | Set Interface State | ${dut1} | ${dut1_if2} | up | | Set Interface State | ${dut2} | ${dut2_if1} | up | | Set Interface State | ${dut2} | ${dut2_if2} | up | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/memif-DUT1_VNF${number}-1 -| | | ${sock2}= | Set Variable | /tmp/memif-DUT1_VNF${number}-2 -| | | ${prev_index}= | Evaluate | ${number}-1 -| | | Set up memif interfaces on DUT node | ${dut1} -| | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 -| | | ... | dut1-memif-${number}-if2 -| | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} -| | | ... | ${dut1-memif-${prev_index}-if2} -| | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1} -| | | ... | ${dut1-memif-${number}-if1} -| | | ${sock1}= | Set Variable | /tmp/memif-DUT2_VNF${number}-1 -| | | ${sock2}= | Set Variable | /tmp/memif-DUT2_VNF${number}-2 -| | | Set up memif interfaces on DUT node | ${dut2} -| | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 -| | | ... | dut2-memif-${number}-if2 -| | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} -| | | ... | ${dut2-memif-${prev_index}-if2} -| | | Configure L2XC | ${dut2} | ${dut2_xconnect_if1} -| | | ... | ${dut2-memif-${number}-if1} -| | | Run Keyword If | ${number}==${nr} | Configure L2XC -| | | ... | ${dut1} | ${dut1-memif-${number}-if2} | ${dut1_if2} -| | | Run Keyword If | ${number}==${nr} | Configure L2XC -| | | ... | ${dut2} | ${dut2-memif-${number}-if2} | ${dut2_if2} +| | | ${sock1}= | Set Variable | memif-DUT1_VNF +| | | ${sock2}= | Set Variable | memif-DUT1_VNF +| | | ${prev_index}= | Evaluate | ${number}-1 +| | | Set up memif interfaces on DUT node | ${dut1} +| | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 +| | | ... | dut1-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} +| | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} +| | | ... | ${dut1-memif-${prev_index}-if2} +| | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1} +| | | ... | ${dut1-memif-${number}-if1} +| | | ${sock1}= | Set Variable | memif-DUT2_VNF +| | | ${sock2}= | Set Variable | memif-DUT2_VNF +| | | Set up memif interfaces on DUT node | ${dut2} +| | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 +| | | ... | dut2-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} +| | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} +| | | ... | ${dut2-memif-${prev_index}-if2} +| | | Configure L2XC | ${dut2} | ${dut2_xconnect_if1} +| | | ... | ${dut2-memif-${number}-if1} +| | | Run Keyword If | ${number}==${nr} | Configure L2XC +| | | ... | ${dut1} | ${dut1-memif-${number}-if2} | ${dut1_if2} +| | | Run Keyword If | ${number}==${nr} | Configure L2XC +| | | ... | ${dut2} | ${dut2-memif-${number}-if2} | ${dut2_if2} +| | All Vpp Interfaces Ready Wait | ${nodes} +| | Show Memif on all DUTs | ${nodes} | Initialize L2 Bridge Domain for '${nr}' memif pairs in 3-node circular topology | | [Documentation] @@ -2056,8 +2656,7 @@ | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${number}-1 -| | ... | - /tmp/memif-${number}-2 +| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} | | ... | | ... | *Example:* | | ... @@ -2070,22 +2669,96 @@ | | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${1} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/memif-DUT1_VNF${number}-1 -| | | ${sock2}= | Set Variable | /tmp/memif-DUT1_VNF${number}-2 +| | | ${sock1}= | Set Variable | memif-DUT1_VNF +| | | ${sock2}= | Set Variable | memif-DUT1_VNF | | | Set up memif interfaces on DUT node | ${dut1} | | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 -| | | ... | dut1-memif-${number}-if2 +| | | ... | dut1-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | ${bd_id2}= | Evaluate | ${number}+1 | | | Add interface to bridge domain | ${dut1} | | | ... | ${dut1-memif-${number}-if1} | ${number} | | | Add interface to bridge domain | ${dut1} | | | ... | ${dut1-memif-${number}-if2} | ${bd_id2} -| | | ${sock1}= | Set Variable | /tmp/memif-DUT2_VNF${number}-1 -| | | ${sock2}= | Set Variable | /tmp/memif-DUT2_VNF${number}-2 +| | | ${sock1}= | Set Variable | memif-DUT2_VNF +| | | ${sock2}= | Set Variable | memif-DUT2_VNF | | | Set up memif interfaces on DUT node | ${dut2} | | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 -| | | ... | dut2-memif-${number}-if2 +| | | ... | dut2-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | Add interface to bridge domain | ${dut2} | | | ... | ${dut2-memif-${number}-if1} | ${number} | | | Add interface to bridge domain | ${dut2} | | | ... | ${dut2-memif-${number}-if2} | ${bd_id2} +| | All Vpp Interfaces Ready Wait | ${nodes} +| | Show Memif on all DUTs | ${nodes} + +| Initialize L2 xconnect for single memif in 3-node circular topology +| | [Documentation] +| | ... | Create single Memif interface on all defined VPP nodes. Cross +| | ... | connect Memif interface with one physical interface. +| | ... +| | ... | *Arguments:* +| | ... | - ${number} - Memif ID. Type: integer +| | ... +| | ... | *Note:* +| | ... | Socket paths for Memif are defined in following format: +| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 xconnect for single memif in 3-node circular \ +| | ... | topology \| 1 \| +| | ... +| | [Arguments] | ${number}=${1} +| | ${sock}= | Set Variable | memif-DUT1_VNF +| | Set up single memif interface on DUT node | ${dut1} | ${sock} +| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1-memif-${number}-if1} +| | ${sock}= | Set Variable | memif-DUT2_VNF +| | Set up single memif interface on DUT node | ${dut2} | ${sock} +| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2-memif-${number}-if1} +| | All Vpp Interfaces Ready Wait | ${nodes} +| | Show Memif on all DUTs | ${nodes} + +| Initialize L2 Bridge Domain for single memif in 3-node circular topology +| | [Documentation] +| | ... | Create single Memif interface on all defined VPP nodes. Put Memif +| | ... | interface to separate L2 bridge domain with one physical interface. +| | ... +| | ... | *Arguments:* +| | ... | - ${number} - Memif ID. Type: integer +| | ... +| | ... | *Note:* +| | ... | Socket paths for Memif are defined in following format: +| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 Bridge Domain for single memif in 3-node circular \ +| | ... | topology \| 1 \| +| | ... +| | [Arguments] | ${number}=${1} +| | ${sock}= | Set Variable | memif-DUT1_VNF +| | Set up single memif interface on DUT node | ${dut1} | ${sock} +| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${number} +| | Add interface to bridge domain | ${dut1} | ${dut1-memif-${number}-if1} +| | ... | ${number} +| | ${sock}= | Set Variable | memif-DUT2_VNF +| | Set up single memif interface on DUT node | ${dut2} | ${sock} +| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${number} +| | Add interface to bridge domain | ${dut2} | ${dut2-memif-${number}-if1} +| | ... | ${number} +| | All Vpp Interfaces Ready Wait | ${nodes} +| | Show Memif on all DUTs | ${nodes}