X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_setup.robot;fp=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_setup.robot;h=0000000000000000000000000000000000000000;hp=3e27c18d6a726de7e8e4433146051edc5e72f494;hb=1577123a3c27541181097cb4186aa8855f20b1cc;hpb=cac8f76ce1f9085e9eede19b250f4a4cb9b199e0 diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot deleted file mode 100644 index 3e27c18d6a..0000000000 --- a/resources/libraries/robot/performance/performance_setup.robot +++ /dev/null @@ -1,616 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.DUTSetup -| Library | resources.tools.wrk.wrk -| Resource | resources/libraries/robot/performance/performance_configuration.robot -| Resource | resources/libraries/robot/performance/performance_limits.robot -| Resource | resources/libraries/robot/performance/performance_utils.robot -| Resource | resources/libraries/robot/tcp/tcp_setup.robot -| Documentation | Performance suite keywords - Suite and test setups and -| ... | teardowns. - -*** Keywords *** - -# Keywords used in setups and teardowns - -| Set variables in 2-node circular topology with DUT interface model -| | [Documentation] -| | ... | Compute path for testing on two given nodes in circular topology -| | ... | based on interface model provided as an argument and set -| | ... | corresponding suite variables. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - 1st TG interface towards DUT. -| | ... | - tg_if1 - 1st TG interface MAC address. -| | ... | - tg_if2 - 2nd TG interface towards DUT. -| | ... | - tg_if2 - 2nd TG interface MAC address. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - 1st DUT interface towards TG. -| | ... | - dut1_if2 - 2nd DUT interface towards TG. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set variables in 2-node circular topology with DUT interface model\ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | ${iface_model_list}= | Create list | ${iface_model} -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path | always_same_link=${FALSE} -| | ${tg_if1} | ${tg}= | First Interface -| | ${dut1_if1} | ${dut1}= | First Ingress Interface -| | ${dut1_if2} | ${dut1}= | Last Egress Interface -| | ${tg_if2} | ${tg}= | Last Interface -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if1_mac} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${tg_if2_mac} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} - -| Set variables in 3-node circular topology with DUT interface model -| | [Documentation] -| | ... | Compute path for testing on three given nodes in circular topology -| | ... | based on interface model provided as an argument and set -| | ... | corresponding suite variables. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - 1st TG interface towards DUT. -| | ... | - tg_if1 - 1st TG interface MAC address. -| | ... | - tg_if2 - 2nd TG interface towards DUT. -| | ... | - tg_if2 - 2nd TG interface MAC address. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2 - DUT2 node -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set variables in 3-node circular topology with DUT interface model\ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | ${iface_model_list}= | Create list | ${iface_model} -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path -| | ${tg_if1} | ${tg}= | Next Interface -| | ${dut1_if1} | ${dut1}= | Next Interface -| | ${dut1_if2} | ${dut1}= | Next Interface -| | ${dut2_if1} | ${dut2}= | Next Interface -| | ${dut2_if2} | ${dut2}= | Next Interface -| | ${tg_if2} | ${tg}= | Next Interface -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if1_mac} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${tg_if2_mac} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} -| | Set Suite Variable | ${dut2} -| | Set Suite Variable | ${dut2_if1} -| | Set Suite Variable | ${dut2_if2} - -| Set variables in 3-node circular topology with DUT interface model with double link between DUTs -| | [Documentation] -| | ... | Compute path for testing on three given nodes in circular topology -| | ... | with double link between DUTs based on interface model provided as an -| | ... | argument and set corresponding suite variables. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - 1st TG interface towards DUT. -| | ... | - tg_if1 - 1st TG interface MAC address. -| | ... | - tg_if2 - 2nd TG interface towards DUT. -| | ... | - tg_if2 - 2nd TG interface MAC address. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2_1 - DUT1 interface 1 towards DUT2. -| | ... | - dut1_if2_2 - DUT1 interface 2 towards DUT2. -| | ... | - dut2 - DUT2 node -| | ... | - dut2_if1_1 - DUT2 interface 1 towards DUT1. -| | ... | - dut2_if1_2 - DUT2 interface 2 towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set variables in 3-node circular topology with DUT interface model\ -| | ... | with double link between DUTs \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | ${iface_model_list}= | Create list | ${iface_model} -| | # Compute path TG - DUT1 with single link in between -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path -| | ${tg_if1} | ${tg}= | Next Interface -| | ${dut1_if1} | ${dut1}= | Next Interface -| | # Compute path TG - DUT2 with single link in between -| | Clear Path -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path -| | ${tg_if2} | ${tg}= | Next Interface -| | ${dut2_if2} | ${dut2}= | Next Interface -| | # Compute path DUT1 - DUT2 with double link in between -| | Clear Path -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Compute Path | always_same_link=${FALSE} -| | ${dut1_if2_1} | ${dut1}= | First Interface -| | ${dut1_if2_2} | ${dut1}= | Last Interface -| | ${dut2_if1_1} | ${dut2}= | First Ingress Interface -| | ${dut2_if1_2} | ${dut2}= | Last Egress Interface -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | # Set suite variables -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if1_mac} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${tg_if2_mac} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2_1} -| | Set Suite Variable | ${dut1_if2_2} -| | Set Suite Variable | ${dut2} -| | Set Suite Variable | ${dut2_if1_1} -| | Set Suite Variable | ${dut2_if1_2} -| | Set Suite Variable | ${dut2_if2} - -# Suite setups - -| Set up 2-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${osi_layer} - -| Set up 2-node-switched performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... | - tg_if1_dest_mac - Interface 1 destination MAC address. Type: string -| | ... | - tg_if2_dest_mac - Interface 2 destination MAC address. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \ -| | ... | \| 22:22:33:44:55:66 \| 22:22:33:44:55:55 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} | ${tg_if1_dest_mac} -| | ... | ${tg_if2_dest_mac} -| | ... -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${osi_layer} -| | ... | ${tg_if1_dest_mac} | ${tg_if2_dest_mac} - -| Set up 3-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up 3-node performance topology with DUT's NIC model \| L2 \ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${osi_layer} - -| Set up 3-node performance topology with DUT's NIC model with double link between DUTs -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up 3-node performance topology with DUT's NIC model with \ -| | ... | double link between DUTs \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 3-node circular topology with DUT interface model with double link between DUTs -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${osi_layer} - -| Set up DPDK 2-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. Initializes DPDK test -| | ... | environment. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up DPDK 2-node performance topology with DUT's NIC model \ -| | ... | \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${osi_layer} -| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Set up DPDK 3-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. Initializes DPDK test -| | ... | environment. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${osi_layer} -| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} - -| Set up SRIOV 2-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... | It configures PCI device with VFs on all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... | - vf_driver - Virtual function driver. Type: string -| | ... | - numvfs - Number of VFs. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up SRIOV 2-node performance topology with DUT's NIC model \ -| | ... | \| L2 \| Intel-X520-DA2 \| AVF \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} | ${vf_driver} -| | ... | ${numvfs}=${1} -| | ... -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Run Keyword If | '${vf_driver}' == 'AVF' -| | ... | Configure AVF interfaces on all DUTs | numvfs=${numvfs} -| | ... | osi_layer=${osi_layer} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut1} | ${dut1_if2_vf0} -| | ... | ${osi_layer} - -| Set up SRIOV 3-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... | It configures PCI device with VFs on all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... | - vf_driver - Virtual function driver. Type: string -| | ... | - numvfs - Number of VFs. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up SRIOV 3-node performance topology with DUT's NIC model \ -| | ... | \| L2 \| Intel-X520-DA2 \| AVF \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} | ${vf_driver} -| | ... | ${numvfs}=${1} -| | ... -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Run Keyword If | '${vf_driver}' == 'AVF' -| | ... | Configure AVF interfaces on all DUTs | numvfs=${numvfs} -| | ... | osi_layer=${osi_layer} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut2} | ${dut2_if2_vf0} -| | ... | ${osi_layer} - -| Set up IPSec performance test suite -| | [Documentation] -| | ... | Suite preparation phase that sets default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... | Then it configures crypto device and kernel module on all DUTs. -| | ... -| | ... | TODO CSIT-1481: Crypto HW should be read from topology file instead. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... | - crypto_type - Crypto device type - HW_DH895xcc or HW_C3xxx or -| | ... | SW_cryptodev. Type: string, default value: HW_DH895xcc -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up IPSec performance test suite \| L2 \ -| | ... | \| Intel-X520-DA2 \| HW_DH895xcc \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} | ${crypto_type}=HW_DH895xcc -| | ... -| | Set up 3-node performance topology with DUT's NIC model -| | ... | ${osi_layer} | ${nic_name} -| | Return From Keyword If | '${crypto_type}' == 'SW_cryptodev' -| | ${numvfs}= | Set Variable If -| | ... | '${crypto_type}' == 'HW_DH895xcc' | ${32} -| | ... | '${crypto_type}' == 'HW_C3xxx' | ${16} -| | Configure crypto device on all DUTs | ${crypto_type} | numvfs=${numvfs} -| | ... | force_init=${True} -| | Configure kernel module on all DUTs | vfio_pci | force_load=${True} - -| Set up performance test suite with MEMIF -| | [Documentation] -| | ... | Append memif_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | memif_plugin.so - -| Set up performance test suite with NAT -| | [Documentation] -| | ... | Append nat_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | nat_plugin.so - -| Set up performance test suite with ACL -| | [Documentation] -| | ... | Append acl_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | acl_plugin.so - -| Set up performance test suite with AVF driver -| | [Documentation] -| | ... | Append avf_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | avf_plugin.so - -| Set up performance test suite with Static SRv6 proxy -| | [Documentation] -| | ... | Append srv6as_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | srv6as_plugin.so - -| Set up performance test suite with Dynamic SRv6 proxy -| | [Documentation] -| | ... | Append srv6ad_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | srv6ad_plugin.so - -| Set up performance test suite with Masquerading SRv6 proxy -| | [Documentation] -| | ... | Append srv6am_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | srv6am_plugin.so - -| Set up performance test suite with LACP mode link bonding -| | [Documentation] -| | ... | Append lacp_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | lacp_plugin.so - -| Set up performance test suite with crypto ipsecmb -| | [Documentation] -| | ... | Append crypto_ipsecmb_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | crypto_ia32_plugin.so -| | Append To List | ${plugins_to_enable} | crypto_ipsecmb_plugin.so -| | Append To List | ${plugins_to_enable} | crypto_openssl_plugin.so - -| Set up 3-node performance topology with wrk and DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Installs the traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up 3-node performance topology with wrk and DUT's NIC model\ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${iface_model} -| | Iface update numa node | ${tg} -# Make sure TRex is stopped -| | ${running}= | Is TRex running | ${tg} -| | Run keyword if | ${running}==${True} | Teardown traffic generator | ${tg} -| | ${curr_driver}= | Get PCI dev driver | ${tg} -| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} -| | Run keyword if | '${curr_driver}'!='${None}' -| | ... | PCI Driver Unbind | ${tg} | -| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} -# Bind tg_if1 to driver specified in the topology -| | ${driver}= | Get Variable Value | ${tg['interfaces']['${tg_if1}']['driver']} -| | PCI Driver Bind | ${tg} -| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} | ${driver} -# Set IP on tg_if1 -| | ${intf_name}= | Get Linux interface name | ${tg} -| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.10.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.20.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.30.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.40.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.50.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.60.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.70.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.80.1 | 24 -| | Set Linux interface up | ${tg} | ${intf_name} -| | Install wrk | ${tg} - -# Tests setups - -| Set up performance test -| | [Documentation] | Common test setup for performance tests. -| | ... -| | Reset PAPI History On All DUTs | ${nodes} -| | Create base startup configuration of VPP on all DUTs - -| Set up tcp performance test -| | [Documentation] | Common test setup for TCP performance tests. -| | ... -| | Reset PAPI History On All DUTs | ${nodes} -| | Create base startup configuration of VPP for TCP tests on all DUTs - -| Set up performance test with Ligato Kubernetes -| | [Documentation] | Common test setup for performance tests with Ligato \ -| | ... | Kubernetes. -| | ... -| | Apply Kubernetes resource on all duts | ${nodes} | namespaces/csit.yaml -| | Apply Kubernetes resource on all duts | ${nodes} | pods/kafka.yaml -| | Apply Kubernetes resource on all duts | ${nodes} | pods/etcdv3.yaml -| | Apply Kubernetes resource on all duts | ${nodes} -| | ... | configmaps/vswitch-agent-cfg.yaml -| | Apply Kubernetes resource on all duts | ${nodes} -| | ... | configmaps/vnf-agent-cfg.yaml -| | Apply Kubernetes resource on all duts | ${nodes} -| | ... | pods/contiv-sfc-controller.yaml -| | Apply Kubernetes resource on all duts | ${nodes} -| | ... | pods/contiv-vswitch.yaml - -| Set up performance test with containers -| | [Documentation] -| | ... | Common test setup for performance tests with containers -| | ... -| | ... | *Arguments:* -| | ... | - chains: Total number of chains. Type: integer -| | ... | - nodeness: Total number of nodes per chain. Type: integer -| | ... | - auto_scale - If True, use same amount of Dataplane threads for -| | ... | network function as DUT, otherwise use single physical core for -| | ... | every network function. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up performance test with containers \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | Set Test Variable | @{container_groups} | @{EMPTY} -| | Set Test Variable | ${container_group} | CNF -| | Set Test Variable | ${nf_nodes} -| | Import Library | resources.libraries.python.ContainerUtils.ContainerManager -| | ... | engine=${container_engine} | WITH NAME | ${container_group} -| | Construct chains of containers on all DUTs | ${nf_chains} | ${nf_nodes} -| | ... | auto_scale=${auto_scale} -| | Acquire all '${container_group}' containers -| | Create all '${container_group}' containers -| | Configure VPP in all '${container_group}' containers -| | Stop VPP service on all DUTs | ${nodes} -| | Start VPP in all '${container_group}' containers -| | Restart VPP service on all DUTs | ${nodes} -| | Verify VPP on all DUTs | ${nodes} -| | Save VPP PIDs -| | Append To List | ${container_groups} | ${container_group}