X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_setup.robot;h=98f63105104b95978c38c3873bd3cd6f858b7e2b;hp=fad9b630a04511fdc2e0833569df49c1b48c5908;hb=2e1697f369f938b06ba85a2c3c1d80c8411173d6;hpb=b883aab899c75a351b2c4af42c98e918810f2272 diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot index fad9b630a0..98f6310510 100644 --- a/resources/libraries/robot/performance/performance_setup.robot +++ b/resources/libraries/robot/performance/performance_setup.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -16,6 +16,7 @@ | Library | resources.tools.wrk.wrk | Resource | resources/libraries/robot/performance/performance_configuration.robot | Resource | resources/libraries/robot/performance/performance_utils.robot +| Resource | resources/libraries/robot/tcp/tcp_setup.robot | Documentation | Performance suite keywords - Suite and test setups and | ... | teardowns. @@ -23,70 +24,55 @@ # Keywords used in setups and teardowns -| Set variables in 2-node circular topology +| Set variables in 2-node circular topology with DUT interface model | | [Documentation] -| | ... | Compute path for testing on two given nodes in circular -| | ... | topology and set corresponding suite variables. +| | ... | Compute path for testing on two given nodes in circular topology +| | ... | based on interface model provided as an argument and set +| | ... | corresponding suite variables. +| | ... +| | ... | *Arguments:* +| | ... | - iface_model - Interface model. Type: string | | ... | | ... | _NOTE:_ This KW sets following suite variables: | | ... | - tg - TG node | | ... | - tg_if1 - 1st TG interface towards DUT. +| | ... | - tg_if1 - 1st TG interface MAC address. | | ... | - tg_if2 - 2nd TG interface towards DUT. +| | ... | - tg_if2 - 2nd TG interface MAC address. | | ... | - dut1 - DUT1 node | | ... | - dut1_if1 - 1st DUT interface towards TG. | | ... | - dut1_if2 - 2nd DUT interface towards TG. | | ... -| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | ... | *Example:* +| | ... +| | ... | \| Set variables in 2-node circular topology with DUT interface model\ +| | ... | \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${iface_model} +| | ... +| | ${iface_model_list}= | Create list | ${iface_model} +| | Append Node | ${nodes['TG']} +| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} +| | Append Node | ${nodes['TG']} | | Compute Path | always_same_link=${FALSE} | | ${tg_if1} | ${tg}= | First Interface | | ${dut1_if1} | ${dut1}= | First Ingress Interface | | ${dut1_if2} | ${dut1}= | Last Egress Interface | | ${tg_if2} | ${tg}= | Last Interface +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | Set Suite Variable | ${tg} | | Set Suite Variable | ${tg_if1} +| | Set Suite Variable | ${tg_if1_mac} | | Set Suite Variable | ${tg_if2} +| | Set Suite Variable | ${tg_if2_mac} | | Set Suite Variable | ${dut1} | | Set Suite Variable | ${dut1_if1} | | Set Suite Variable | ${dut1_if2} -| Set variables in 3-node circular topology -| | [Documentation] -| | ... | Compute path for testing on three given nodes in circular -| | ... | topology and set corresponding suite variables. -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - TG interface towards DUT1. -| | ... | - tg_if2 - TG interface towards DUT2. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2 - DUT2 node -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} -| | ... | ${nodes['TG']} -| | Compute Path -| | ${tg_if1} | ${tg}= | Next Interface -| | ${dut1_if1} | ${dut1}= | Next Interface -| | ${dut1_if2} | ${dut1}= | Next Interface -| | ${dut2_if1} | ${dut2}= | Next Interface -| | ${dut2_if2} | ${dut2}= | Next Interface -| | ${tg_if2} | ${tg}= | Next Interface -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} -| | Set Suite Variable | ${dut2} -| | Set Suite Variable | ${dut2_if1} -| | Set Suite Variable | ${dut2_if2} - -| Set variables in 2-node circular topology with DUT interface model +| Set variables in 3-node circular topology with DUT interface model | | [Documentation] -| | ... | Compute path for testing on two given nodes in circular topology +| | ... | Compute path for testing on three given nodes in circular topology | | ... | based on interface model provided as an argument and set | | ... | corresponding suite variables. | | ... @@ -96,14 +82,19 @@ | | ... | _NOTE:_ This KW sets following suite variables: | | ... | - tg - TG node | | ... | - tg_if1 - 1st TG interface towards DUT. +| | ... | - tg_if1 - 1st TG interface MAC address. | | ... | - tg_if2 - 2nd TG interface towards DUT. +| | ... | - tg_if2 - 2nd TG interface MAC address. | | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - 1st DUT interface towards TG. -| | ... | - dut1_if2 - 2nd DUT interface towards TG. +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2 - DUT2 node +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. | | ... | | ... | *Example:* | | ... -| | ... | \| Set variables in 2-node circular topology with DUT interface model\ +| | ... | \| Set variables in 3-node circular topology with DUT interface model\ | | ... | \| Intel-X520-DA2 \| | | ... | | [Arguments] | ${iface_model} @@ -111,66 +102,101 @@ | | ${iface_model_list}= | Create list | ${iface_model} | | Append Node | ${nodes['TG']} | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} +| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} | | Append Node | ${nodes['TG']} -| | Compute Path | always_same_link=${FALSE} -| | ${tg_if1} | ${tg}= | First Interface -| | ${dut1_if1} | ${dut1}= | First Ingress Interface -| | ${dut1_if2} | ${dut1}= | Last Egress Interface -| | ${tg_if2} | ${tg}= | Last Interface +| | Compute Path +| | ${tg_if1} | ${tg}= | Next Interface +| | ${dut1_if1} | ${dut1}= | Next Interface +| | ${dut1_if2} | ${dut1}= | Next Interface +| | ${dut2_if1} | ${dut2}= | Next Interface +| | ${dut2_if2} | ${dut2}= | Next Interface +| | ${tg_if2} | ${tg}= | Next Interface +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | Set Suite Variable | ${tg} | | Set Suite Variable | ${tg_if1} +| | Set Suite Variable | ${tg_if1_mac} | | Set Suite Variable | ${tg_if2} +| | Set Suite Variable | ${tg_if2_mac} | | Set Suite Variable | ${dut1} | | Set Suite Variable | ${dut1_if1} | | Set Suite Variable | ${dut1_if2} +| | Set Suite Variable | ${dut2} +| | Set Suite Variable | ${dut2_if1} +| | Set Suite Variable | ${dut2_if2} -| Set variables in 3-node circular topology with DUT interface model +| Set variables in 3-node circular topology with DUT interface model with double link between DUTs | | [Documentation] | | ... | Compute path for testing on three given nodes in circular topology -| | ... | based on interface model provided as an argument and set -| | ... | corresponding suite variables. +| | ... | with double link between DUTs based on interface model provided as an +| | ... | argument and set corresponding suite variables. | | ... | | ... | *Arguments:* | | ... | - iface_model - Interface model. Type: string | | ... | | ... | _NOTE:_ This KW sets following suite variables: | | ... | - tg - TG node -| | ... | - tg_if1 - TG interface towards DUT1. -| | ... | - tg_if2 - TG interface towards DUT2. +| | ... | - tg_if1 - 1st TG interface towards DUT. +| | ... | - tg_if1 - 1st TG interface MAC address. +| | ... | - tg_if2 - 2nd TG interface towards DUT. +| | ... | - tg_if2 - 2nd TG interface MAC address. | | ... | - dut1 - DUT1 node | | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut1_if2_1 - DUT1 interface 1 towards DUT2. +| | ... | - dut1_if2_2 - DUT1 interface 2 towards DUT2. | | ... | - dut2 - DUT2 node -| | ... | - dut2_if1 - DUT2 interface towards TG. -| | ... | - dut2_if2 - DUT2 interface towards DUT1. +| | ... | - dut2_if1_1 - DUT2 interface 1 towards DUT1. +| | ... | - dut2_if1_2 - DUT2 interface 2 towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. | | ... | | ... | *Example:* | | ... | | ... | \| Set variables in 3-node circular topology with DUT interface model\ -| | ... | \| Intel-X520-DA2 \| +| | ... | with double link between DUTs \| Intel-X520-DA2 \| | | ... | | [Arguments] | ${iface_model} | | ... | | ${iface_model_list}= | Create list | ${iface_model} +| | # Compute path TG - DUT1 with single link in between | | Append Node | ${nodes['TG']} | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} | | Append Node | ${nodes['TG']} | | Compute Path | | ${tg_if1} | ${tg}= | Next Interface | | ${dut1_if1} | ${dut1}= | Next Interface -| | ${dut1_if2} | ${dut1}= | Next Interface -| | ${dut2_if1} | ${dut2}= | Next Interface -| | ${dut2_if2} | ${dut2}= | Next Interface +| | # Compute path TG - DUT2 with single link in between +| | Clear Path +| | Append Node | ${nodes['TG']} +| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} +| | Append Node | ${nodes['TG']} +| | Compute Path | | ${tg_if2} | ${tg}= | Next Interface +| | ${dut2_if2} | ${dut2}= | Next Interface +| | # Compute path DUT1 - DUT2 with double link in between +| | Clear Path +| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} +| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} +| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} +| | Compute Path | always_same_link=${FALSE} +| | ${dut1_if2_1} | ${dut1}= | First Interface +| | ${dut1_if2_2} | ${dut1}= | Last Interface +| | ${dut2_if1_1} | ${dut2}= | First Ingress Interface +| | ${dut2_if1_2} | ${dut2}= | Last Egress Interface +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | # Set suite variables | | Set Suite Variable | ${tg} | | Set Suite Variable | ${tg_if1} +| | Set Suite Variable | ${tg_if1_mac} | | Set Suite Variable | ${tg_if2} +| | Set Suite Variable | ${tg_if2_mac} | | Set Suite Variable | ${dut1} | | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} +| | Set Suite Variable | ${dut1_if2_1} +| | Set Suite Variable | ${dut1_if2_2} | | Set Suite Variable | ${dut2} -| | Set Suite Variable | ${dut2_if1} +| | Set Suite Variable | ${dut2_if1_1} +| | Set Suite Variable | ${dut2_if1_2} | | Set Suite Variable | ${dut2_if2} | Tear down guest VM with dpdk-testpmd @@ -227,8 +253,8 @@ | Set up 2-node performance topology with DUT's NIC model | | [Documentation] -| | ... | Suite preparation phase that setup default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global +| | ... | Suite preparation phase that sets the default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global | | ... | variables used in test cases based on interface model provided as an | | ... | argument. Initializes traffic generator. | | ... @@ -249,8 +275,8 @@ | Set up 2-node-switched performance topology with DUT's NIC model | | [Documentation] -| | ... | Suite preparation phase that setup default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global +| | ... | Suite preparation phase that sets the default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global | | ... | variables used in test cases based on interface model provided as an | | ... | argument. Initializes traffic generator. | | ... @@ -276,8 +302,8 @@ | Set up 3-node performance topology with DUT's NIC model | | [Documentation] -| | ... | Suite preparation phase that setup default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global +| | ... | Suite preparation phase that sets the default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global | | ... | variables used in test cases based on interface model provided as an | | ... | argument. Initializes traffic generator. | | ... @@ -297,9 +323,32 @@ | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} | | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type} +| Set up 3-node performance topology with DUT's NIC model with double link between DUTs +| | [Documentation] +| | ... | Suite preparation phase that sets the default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up 3-node performance topology with DUT's NIC model with \ +| | ... | double link between DUTs \| L2 \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} +| | ... +| | Set variables in 3-node circular topology with DUT interface model with double link between DUTs +| | ... | ${nic_model} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type} + | Set up DPDK 2-node performance topology with DUT's NIC model | | [Documentation] -| | ... | Updates interfaces on all nodes and setup global +| | ... | Updates interfaces on all nodes and sets the global | | ... | variables used in test cases based on interface model provided as an | | ... | argument. Initializes traffic generator. Initializes DPDK test | | ... | environment. @@ -323,7 +372,7 @@ | Set up DPDK 3-node performance topology with DUT's NIC model | | [Documentation] -| | ... | Updates interfaces on all nodes and setup global +| | ... | Updates interfaces on all nodes and sets the global | | ... | variables used in test cases based on interface model provided as an | | ... | argument. Initializes traffic generator. Initializes DPDK test | | ... | environment. @@ -345,6 +394,68 @@ | | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} | | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} +| Set up SRIOV 2-node performance topology with DUT's NIC model +| | [Documentation] +| | ... | Suite preparation phase that sets default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. +| | ... | It configures PCI device with VFs on all DUTs. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... | - vf_driver - Virtual function driver. Type: string +| | ... | - numvfs - Number of VFs. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up SRIOV 2-node performance topology with DUT's NIC model \ +| | ... | \| L2 \| Intel-X520-DA2 \| AVF \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} | ${vf_driver} +| | ... | ${numvfs}=${1} +| | ... +| | Set variables in 2-node circular topology with DUT interface model +| | ... | ${nic_model} +| | Run Keyword If | '${vf_driver}' == 'AVF' +| | ... | Configure AVF interfaces on all DUTs | numvfs=${numvfs} +| | ... | topology_type=${topology_type} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut1} | ${dut1_if2_vf0} +| | ... | ${topology_type} + +| Set up SRIOV 3-node performance topology with DUT's NIC model +| | [Documentation] +| | ... | Suite preparation phase that sets default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. +| | ... | It configures PCI device with VFs on all DUTs. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... | - vf_driver - Virtual function driver. Type: string +| | ... | - numvfs - Number of VFs. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up SRIOV 3-node performance topology with DUT's NIC model \ +| | ... | \| L2 \| Intel-X520-DA2 \| AVF \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} | ${vf_driver} +| | ... | ${numvfs}=${1} +| | ... +| | Set variables in 3-node circular topology with DUT interface model +| | ... | ${nic_model} +| | Run Keyword If | '${vf_driver}' == 'AVF' +| | ... | Configure AVF interfaces on all DUTs | numvfs=${numvfs} +| | ... | topology_type=${topology_type} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut2} | ${dut2_if2_vf0} +| | ... | ${topology_type} + | Set up IPSec performance test suite | | [Documentation] | | ... | Suite preparation phase that sets default startup configuration of @@ -370,47 +481,72 @@ | | ... | ${topology_type} | ${nic_model} | | ${numvfs}= | Set Variable If | | ... | '${crypto_type}' == 'HW_cryptodev' | ${32} -| | ... | '${crypto_type}' == 'SW_cryptodev' | ${0} -| | Configure crypto device on all DUTs | force_init=${True} | numvfs=${numvfs} | | Run Keyword If | '${crypto_type}' == 'HW_cryptodev' -| | ... | Configure kernel module on all DUTs | igb_uio | force_load=${True} - -| Set up performance topology with containers -| | [Documentation] -| | ... | Suite preparation phase that starts containers -| | ... -| | Set Suite Variable | @{container_groups} | @{EMPTY} -| | Construct VNF containers on all DUTs -| | Acquire all 'VNF' containers -| | Create all 'VNF' containers -| | Configure VPP in all 'VNF' containers -| | Install VPP in all 'VNF' containers +| | ... | Configure crypto device on all DUTs | force_init=${True} +| | ... | numvfs=${numvfs} +| | Run Keyword If | '${crypto_type}' == 'HW_cryptodev' +| | ... | Configure kernel module on all DUTs | vfio_pci | force_load=${True} | Set up performance test suite with MEMIF | | [Documentation] -| | ... | Remove memif_plugin.so from the list of disabled plugins. +| | ... | Append memif_plugin.so to the list of enabled plugins. | | ... -| | Set Suite Variable | @{plugins_to_disable} -| | Remove Values From List | ${plugins_to_disable} | memif_plugin.so +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | memif_plugin.so | Set up performance test suite with NAT | | [Documentation] -| | ... | Remove nat_plugin.so from the list of disabled plugins. +| | ... | Append nat_plugin.so to the list of enabled plugins. | | ... -| | Set Suite Variable | @{plugins_to_disable} -| | Remove Values From List | ${plugins_to_disable} | nat_plugin.so +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | nat_plugin.so | Set up performance test suite with ACL | | [Documentation] -| | ... | Remove acl_plugin.so from the list of disabled plugins. +| | ... | Append acl_plugin.so to the list of enabled plugins. +| | ... +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | acl_plugin.so + +| Set up performance test suite with AVF driver +| | [Documentation] +| | ... | Append avf_plugin.so to the list of enabled plugins. +| | ... +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | avf_plugin.so + +| Set up performance test suite with Static SRv6 proxy +| | [Documentation] +| | ... | Append srv6as_plugin.so to the list of enabled plugins. +| | ... +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | srv6as_plugin.so + +| Set up performance test suite with Dynamic SRv6 proxy +| | [Documentation] +| | ... | Append srv6ad_plugin.so to the list of enabled plugins. +| | ... +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | srv6ad_plugin.so + +| Set up performance test suite with Masquerading SRv6 proxy +| | [Documentation] +| | ... | Append srv6am_plugin.so to the list of enabled plugins. +| | ... +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | srv6am_plugin.so + +| Set up performance test suite with LACP mode link bonding +| | [Documentation] +| | ... | Append lacp_plugin.so to the list of enabled plugins. | | ... -| | Set Suite Variable | @{plugins_to_disable} -| | Remove Values From List | ${plugins_to_disable} | acl_plugin.so +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | lacp_plugin.so | Set up 3-node performance topology with wrk and DUT's NIC model | | [Documentation] -| | ... | Suite preparation phase that setup default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global +| | ... | Suite preparation phase that sets the default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global | | ... | variables used in test cases based on interface model provided as an | | ... | argument. Installs the traffic generator. | | ... @@ -455,44 +591,32 @@ # Suite teardowns -| Tear down 3-node performance topology -| | [Documentation] -| | ... | Suite teardown phase with traffic generator teardown. -| | ... -| | Teardown traffic generator | ${tg} - -| Tear down 3-node performance topology with container -| | [Documentation] -| | ... | Suite teardown phase with traffic generator teardown and container -| | ... | destroy. -| | ... -| | Teardown traffic generator | ${tg} -| | :FOR | ${group} | IN | @{container_groups} -| | | Destroy all '${group}' containers - | Tear down 2-node performance topology | | [Documentation] | | ... | Suite teardown phase with traffic generator teardown. | | ... | | Teardown traffic generator | ${tg} -| Tear down 2-node performance topology with container +| Tear down 3-node performance topology | | [Documentation] -| | ... | Suite teardown phase with traffic generator teardown and container -| | ... | destroy. +| | ... | Suite teardown phase with traffic generator teardown. | | ... | | Teardown traffic generator | ${tg} -| | :FOR | ${group} | IN | @{container_groups} -| | | Destroy all '${group}' containers # Tests setups | Set up performance test | | [Documentation] | Common test setup for performance tests. | | ... -| | Reset VAT History On All DUTs | ${nodes} +| | Reset PAPI History On All DUTs | ${nodes} | | Create base startup configuration of VPP on all DUTs +| Set up tcp performance test +| | [Documentation] | Common test setup for TCP performance tests. +| | ... +| | Reset PAPI History On All DUTs | ${nodes} +| | Create base startup configuration of VPP for TCP tests on all DUTs + | Set up performance test with Ligato Kubernetes | | [Documentation] | Common test setup for performance tests with Ligato \ | | ... | Kubernetes. @@ -509,11 +633,50 @@ | | Apply Kubernetes resource on all duts | ${nodes} | | ... | pods/contiv-vswitch.yaml +| Set up performance test with containers +| | [Documentation] +| | ... | Common test setup for performance tests with containers +| | ... +| | ... | *Arguments:* +| | ... | - chains: Total number of chains. Type: integer +| | ... | - nodeness: Total number of nodes per chain. Type: integer +| | ... | - auto_scale - If True, use same amount of Dataplane threads for +| | ... | network function as DUT, otherwise use single physical core for +| | ... | every network function. Type: boolean +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up performance test with containers \| 1 \| 1 \| +| | ... +| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} +| | ... +| | Set Test Variable | @{container_groups} | @{EMPTY} +| | Set Test Variable | ${container_group} | CNF +| | Set Test Variable | ${nf_nodes} +| | Import Library | resources.libraries.python.ContainerUtils.ContainerManager +| | ... | engine=${container_engine} | WITH NAME | ${container_group} +| | Construct chains of containers on all DUTs | ${nf_chains} | ${nf_nodes} +| | ... | auto_scale=${auto_scale} +| | Acquire all '${container_group}' containers +| | Create all '${container_group}' containers +| | Configure VPP in all '${container_group}' containers +| | Stop VPP service on all DUTs | ${nodes} +| | Start VPP in all '${container_group}' containers +| | Start VPP service on all DUTs | ${nodes} +| | Append To List | ${container_groups} | ${container_group} + # Tests teardowns +| Tear down performance test +| | [Documentation] | Common test teardown for performance tests. +| | ... +| | Remove All Added Ports On All DUTs From Topology | ${nodes} +| | Show PAPI History On All DUTs | ${nodes} +| | Get Core Files on All Nodes | ${nodes} +| | Set Test Variable | ${pkt_trace} | ${True} + | Tear down performance discovery test -| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ -| | ... | tests. +| | [Documentation] | Common test teardown for ndrpdr performance tests. | | ... | | ... | *Arguments:* | | ... | - rate - Rate for sending packets. Type: string @@ -527,32 +690,17 @@ | | ... | | [Arguments] | ${rate} | ${framesize} | ${topology_type} | | ... -| | Remove All Added Ports On All DUTs From Topology | ${nodes} -| | Show VAT History On All DUTs | ${nodes} -| | Run Keyword If Test Failed -| | ... | Set Test Variable | ${pkt_trace} | ${True} +| | Tear down performance test +| | Show statistics on all DUTs | ${nodes} | | Run Keyword If Test Failed | | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate} | | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} -| Tear down performance ndrchk test -| | [Documentation] | Common test teardown for ndrchk performance tests. -| | ... -| | Remove All Added Ports On All DUTs From Topology | ${nodes} -| | Show VAT History On All DUTs | ${nodes} - -| Tear down performance pdrchk test -| | [Documentation] | Common test teardown for pdrchk performance tests. -| | ... -| | Remove All Added Ports On All DUTs From Topology | ${nodes} -| | Show VAT History On All DUTs | ${nodes} - | Tear down performance mrr test | | [Documentation] | Common test teardown for max-received-rate performance | | ... | tests. | | ... -| | Remove All Added Ports On All DUTs From Topology | ${nodes} -| | Show VAT History On All DUTs | ${nodes} +| | Tear down performance test | Tear down performance test with wrk | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ @@ -562,9 +710,14 @@ | | ... | | ... | \| Tear down performance test with wrk \| | | ... -| | Remove All Added Ports On All DUTs From Topology | ${nodes} -| | Show VAT History On All DUTs | ${nodes} -| | Show statistics on all DUTs | ${nodes} +| | Tear down performance test + +| Tear down performance test with container +| | [Documentation] +| | ... | Common test teardown for performance tests which uses containers. +| | ... +| | :FOR | ${container_group} | IN | @{container_groups} +| | | Destroy all '${container_group}' containers | Tear down performance test with vhost and VM with dpdk-testpmd | | [Documentation] | Common test teardown for performance tests which use @@ -589,26 +742,19 @@ | | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None} | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None} | | ... -| | Remove All Added Ports On All DUTs From Topology | ${nodes} -| | Show VAT History On All DUTs | ${nodes} +| | Tear down performance discovery test | ${rate} | ${framesize} +| | ... | ${topology_type} | | Show VPP vhost on all DUTs | ${nodes} -| | Show statistics on all DUTs | ${nodes} -| | Run Keyword If Test Failed -| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} | | Run keyword unless | ${dut1_node}==${None} | | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs} | | Run keyword unless | ${dut2_node}==${None} | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs} -| Tear down performance pdrchk test with vhost and VM with dpdk-testpmd -| | [Documentation] | Common test teardown for performance pdrchk tests which \ -| | ... | use vhost(s) and VM(s) with dpdk-testpmd. +| Tear down performance mrr test with vhost and VM with dpdk-testpmd +| | [Documentation] | Common test teardown for mrr tests which use +| | ... | vhost(s) and VM(s) with dpdk-testpmd. | | ... | | ... | *Arguments:* -| | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - topology_type - Topology type. Type: string | | ... | - dut1_node - Node where to clean qemu. Type: dictionary | | ... | - dut1_vm_refs - VM references on node. Type: dictionary | | ... | - dut2_node - Node where to clean qemu. Type: dictionary @@ -616,39 +762,81 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Tear down performance pdrchk test with vhost and VM with \ -| | ... | dpdk-testpmd \| 4.0mpps \| 64 \| 3-node-IPv4 \| ${node['DUT1']} \ -| | ... | \| ${dut_vm_refs} \| ${node['DUT2']} \| ${dut_vm_refs} \| +| | ... | \| Tear down performance test with vhost and VM with dpdk-testpmd \ +| | ... | \| ${node['DUT1']} \| ${dut_vm_refs} \ +| | ... | \| ${node['DUT2']} \| ${dut_vm_refs} \| | | ... -| | [Arguments] | ${rate} | ${framesize} | ${topology_type} -| | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None} +| | [Arguments] | ${dut1_node}=${None} | ${dut1_vm_refs}=${None} | | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None} | | ... -| | Remove All Added Ports On All DUTs From Topology | ${nodes} -| | Show VAT History On All DUTs | ${nodes} +| | Tear down performance mrr test | | Show VPP vhost on all DUTs | ${nodes} -| | Show statistics on all DUTs | ${nodes} | | Run keyword unless | ${dut1_node}==${None} | | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs} | | Run keyword unless | ${dut2_node}==${None} | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs} -| Tear down DPDK 3-node performance topology +| Tear down performance test with vhost and VM with dpdk-testpmd and ACL +| | [Documentation] | Common test teardown for performance tests which use +| | ... | vhost(s) and VM(s) with ACL and dpdk-testpmd. +| | ... +| | ... | *Arguments:* +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... | - dut1_node - Node where to clean qemu. Type: dictionary +| | ... | - dut1_vm_refs - VM references on node. Type: dictionary +| | ... | - dut2_node - Node where to clean qemu. Type: dictionary +| | ... | - dut2_vm_refs - VM references on node. Type: dictionary +| | ... +| | [Arguments] | ${rate} | ${framesize} | ${topology_type} +| | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None} +| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None} +| | ... +| | Tear down performance test with vhost and VM with dpdk-testpmd +| | ... | ${rate} | ${framesize} | ${topology_type} +| | ... | ${dut1_node} | ${dut1_vm_refs} +| | ... | ${dut2_node} | ${dut2_vm_refs} +| | Run Keyword If Test Failed | Vpp Log Plugin Acl Settings | ${dut1} +| | Run Keyword If Test Failed | Run Keyword And Ignore Error +| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} + +| Tear down mrr test with vhost and VM with dpdk-testpmd and ACL +| | [Documentation] | Common test teardown for mrr tests which use +| | ... | vhost(s) and VM(s) with ACL and dpdk-testpmd. +| | ... +| | ... | *Arguments:* +| | ... | - dut1_node - Node where to clean qemu. Type: dictionary +| | ... | - dut1_vm_refs - VM references on node. Type: dictionary +| | ... | - dut2_node - Node where to clean qemu. Type: dictionary +| | ... | - dut2_vm_refs - VM references on node. Type: dictionary +| | ... +| | [Arguments] | ${dut1_node}=${None} | ${dut1_vm_refs}=${None} +| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None} +| | ... +| | Tear down performance mrr test with vhost and VM with dpdk-testpmd +| | ... | ${dut1_node} | ${dut1_vm_refs} +| | ... | ${dut2_node} | ${dut2_vm_refs} +| | Run Keyword If Test Failed | Vpp Log Plugin Acl Settings | ${dut1} +| | Run Keyword If Test Failed | Run Keyword And Ignore Error +| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} + +| Tear down DPDK 2-node performance topology | | [Documentation] | | ... | Suite teardown phase with traffic generator teardown. | | ... | Cleanup DPDK test environment. | | ... | | Teardown traffic generator | ${tg} | | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} -| Tear down DPDK 2-node performance topology +| Tear down DPDK 3-node performance topology | | [Documentation] | | ... | Suite teardown phase with traffic generator teardown. | | ... | Cleanup DPDK test environment. | | ... | | Teardown traffic generator | ${tg} | | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} | Tear down performance discovery test with NAT | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ @@ -671,6 +859,16 @@ | | Show NAT verbose | ${dut1} | | Show NAT verbose | ${dut2} +| Tear down mrr test with NAT +| | [Documentation] | Common test teardown for mrr performance \ +| | ... | tests with NAT feature used. +| | ... +| | ... | \| Tear down mrr test with NAT \| +| | ... +| | Tear down performance mrr test +| | Show NAT verbose | ${dut1} +| | Show NAT verbose | ${dut2} + | Tear down performance test with ACL | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ | | ... | tests with ACL feature used. @@ -689,7 +887,20 @@ | | ... | | Tear down performance discovery test | ${rate} | ${framesize} | | ... | ${traffic_profile} -| | Vpp Log Plugin Acl Settings | ${dut1} +| | Run Keyword If Test Failed | Vpp Log Plugin Acl Settings | ${dut1} +| | Run Keyword If Test Failed | Run Keyword And Ignore Error +| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} + +| Tear down mrr test with ACL +| | [Documentation] | Common test teardown for mrr performance \ +| | ... | tests with ACL feature used. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Tear down mrr test with ACL \| +| | ... +| | Tear down performance mrr test +| | Run Keyword If Test Failed | Vpp Log Plugin Acl Settings | ${dut1} | | Run Keyword If Test Failed | Run Keyword And Ignore Error | | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} @@ -716,6 +927,20 @@ | | Run Keyword And Ignore Error | | ... | Vpp Log Macip Acl Interface Assignment | ${dut1} +| Tear down mrr test with MACIP ACL +| | [Documentation] | Common test teardown for mrr performance \ +| | ... | tests with MACIP ACL feature used. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Tear down mrr test with MACIP ACL \| +| | ... +| | Tear down performance mrr test +| | Run Keyword If Test Failed | Run Keyword And Ignore Error +| | ... | Vpp Log Macip Acl Settings | ${dut1} +| | Run Keyword And Ignore Error +| | ... | Vpp Log Macip Acl Interface Assignment | ${dut1} + | Tear down performance test with Ligato Kubernetes | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ | | ... | tests with Ligato Kubernetes. @@ -732,13 +957,13 @@ | | ... | | ... | *Arguments:* | | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - framesize - L2 Frame Size [B]. Type: integer/string | | ... | - traffic_profile - Traffic profile. Type: string | | ... | | ... | *Example:* | | ... -| | ... | \| Tear down performance test with MACIP ACL \| 100000pps \| 64 \ -| | ... | \| ${traffic_profile} \| +| | ... | \| Tear down performance test with SRv6 with encapsulation \ +| | ... | \| 100000pps \| 64 \| ${traffic_profile} \| | | ... | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile} | | ... @@ -748,3 +973,17 @@ | | Run Keyword If Test Failed | | ... | Show SR Steering Policies on all DUTs | ${nodes} | | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes} + +| Tear down mrr test with SRv6 with encapsulation +| | [Documentation] | Common test teardown for mrr tests with SRv6 with \ +| | ... | encapsulation feature used. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Tear down mrr test with SRv6 with encapsulation \| +| | ... +| | Tear down performance mrr test +| | Run Keyword If Test Failed | Show SR Policies on all DUTs | ${nodes} +| | Run Keyword If Test Failed +| | ... | Show SR Steering Policies on all DUTs | ${nodes} +| | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes}