X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_utils.robot;h=f14d7bd13c36916403e06f538315bdd54d23300a;hp=1935337445f8c4e25b411f8752c9786bd8df01cd;hb=38ba3408ef77161b61cd4be702d0c6e8fc36f8e5;hpb=11abbc5f27ec2d2036a36e0e427afb9e2d5ffe59

diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot
index 1935337445..f14d7bd13c 100644
--- a/resources/libraries/robot/performance/performance_utils.robot
+++ b/resources/libraries/robot/performance/performance_utils.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -15,566 +15,334 @@
 | Library | Collections
 | Library | resources.libraries.python.topology.Topology
 | Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.DpdkUtil
+| Library | resources.libraries.python.PerfUtil
 | Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.KubernetesUtils
-| Library | resources.libraries.python.VhostUser
 | Library | resources.libraries.python.TrafficGenerator
 | Library | resources.libraries.python.TrafficGenerator.OptimizedSearch
 | Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl
 | Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/container.robot
-| Resource | resources/libraries/robot/shared/memif.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/vm/qemu.robot
-| Resource | resources/libraries/robot/l2/tagging.robot
-| Documentation | Performance suite keywords - utilities to find and verify NDR
-| ... | and PDR.
+| Variables | resources/libraries/python/Constants.py
+|
+| Documentation
+| ... | Performance suite keywords - utilities to find and verify NDR and PDR.
 
-*** Keywords ***
-| Get Max Rate And Jumbo
-| | [Documentation]
-| | ... | Argument framesize can be either integer in case of a single packet
-| | ... | in stream, or IMIX string defining mix of packets.
-| | ... | For jumbo frames detection, the maximal packet size is relevant.
-| | ... | For maximal transmit rate, the average packet size is relevant.
-| | ... | In both cases, encapsulation overhead (if any) has effect.
-| | ... | The maximal rate is computed from line limit bandwidth,
-| | ... | but NICs also have an independent limit in packet rate.
-| | ... | For some NICs, the limit is not reachable (bps limit is stricter),
-| | ... | in those cases None is used (meaning no limiting).
-| | ...
-| | ... | This keyword returns computed maximal unidirectional transmit rate
-| | ... | and jumbo boolean (some suites need that).
-| | ...
-| | ... | *Arguments:*
-| | ... | - bps_limit - Line rate limit in bps. Type: integer
-| | ... | - framesize - Framesize in bytes or IMIX. Type: integer or string
-| | ... | - overhead - Overhead in bytes. Default: 0. Type: integer
-| | ... | - pps_limit - NIC limit rate value in pps. Type: integer or None
-| | ...
-| | ... | *Returns:*
-| | ... | - 2-tuple, consisting of:
-| | ... |   - Calculated unidirectional maximal transmit rate.
-| | ... |     Type: integer or float
-| | ... |   - Jumbo boolean, true if jumbo packet support has to be enabled.
-| | ... |     Type: boolean
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Get Max Rate And Jumbo | \${10000000} \| IMIX_v4_1 \
-| | ... | \| overhead=\${40} \| pps_limit=\${18750000} \|
-| | ...
-| | [Arguments] | ${bps_limit} | ${framesize}
-| | ... | ${overhead}=${0} | ${pps_limit}=${None}
-| | ...
-| | ${avg_size} = | Set Variable If | '${framesize}' == 'IMIX_v4_1'
-| | ... | ${353.83333} | ${framesize}
-| | ${max_size} = | Set Variable If | '${framesize}' == 'IMIX_v4_1'
-| | ... | ${1518} | ${framesize}
-| | # swo := size_with_overhead
-| | ${avg_swo} = | Evaluate | ${avg_size} + ${overhead}
-| | ${max_swo} = | Evaluate | ${max_size} + ${overhead}
-| | ${jumbo} = | Set Variable If | ${max_swo} < 1522
-| | ... | ${False} | ${True}
-| | # For testing None see: https://groups.google.com/\
-| | #                       forum/#!topic/robotframework-users/XntFz0ocD9E
-| | ${limit_set} = | Set Variable | ${pps_limit != None}
-| | ${rate} = | Evaluate | (${bps_limit}/((${avg_swo}+20)*8)).__trunc__()
-| | ${max_rate} = | Set Variable If | ${limit_set} and ${rate} > ${pps_limit}
-| | ... | ${pps_limit} | ${rate}
-| | Return From Keyword | ${max_rate} | ${jumbo}
-
-| Get Max Rate And Jumbo And Handle Multi Seg
-| | [Documentation]
-| | ... | This keyword adds correct multi seg configuration,
-| | ... | then returns the result of Get Max Rate And Jumbo keyword.
-| | ...
-| | ... | See Documentation of Get Max Rate And Jumbo for more details.
-| | ...
-| | ... | *Arguments:*
-| | ... | - bps_limit - Line rate limit in bps. Type: integer
-| | ... | - framesize - Framesize in bytes. Type: integer or string
-| | ... | - overhead - Overhead in bytes. Default: 0. Type: integer
-| | ... | - pps_limit - NIC limit rate value in pps. Type: integer or None
-| | ...
-| | ... | *Returns:*
-| | ... | - 2-tuple, consisting of:
-| | ... |   - Calculated unidirectional maximal transmit rate.
-| | ... |     Type: integer or float
-| | ... |   - Jumbo boolean, true if jumbo packet support has to be enabled.
-| | ... |     Type: boolean
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Get Max Rate And Jumbo And Handle Multi Seg | \${10000000} \
-| | ... | \| IMIX_v4_1 \| overhead=\${40} \| pps_limit=\${18750000} \|
-| | ...
-| | [Arguments] | ${bps_limit} | ${framesize}
-| | ... | ${overhead}=${0} | ${pps_limit}=${None}
-| | ...
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo
-| | ... | ${bps_limit} | ${framesize} | ${overhead} | ${pps_limit}
-| | Run Keyword If | not ${jumbo} | Add no multi seg to all DUTs
-| | Return From Keyword | ${max_rate} | ${jumbo}
-
-| Calculate pps
-| | [Documentation]
-| | ... | Calculate pps for given rate and L2 frame size,
-| | ... | additional 20B are added to L2 frame size as padding.
-| | ...
-| | ... | FIXME: Migrate callers to Get Max Rate And Jumbo
-| | ...
-| | ... | *Arguments*
-| | ... | - bps - Rate in bps. Type: integer
-| | ... | - framesize - L2 frame size in Bytes. Type: integer
-| | ...
-| | ... | *Return*
-| | ... | - Calculated pps. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Calculate pps \| 10000000000 \| 64 \|
-| | ...
-| | [Arguments] | ${bps} | ${framesize}
-| | ...
-| | ${framesize}= | Get Frame Size | ${framesize}
-| | ${ret}= | Evaluate | (${bps}/((${framesize}+20)*8)).__trunc__()
-| | Return From Keyword | ${ret}
-
-| Get Frame Size
-| | [Documentation]
-| | ... | Framesize can be either integer in case of a single packet
-| | ... | in stream, or set of packets in case of IMIX type or simmilar.
-| | ... | This keyword returns average framesize.
-| | ...
-| | ... | FIXME: Migrate callers to Get Max Rate And Jumbo
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - Framesize. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Get Frame Size \| IMIX_v4_1 \|
-| | ...
-| | [Arguments] | ${framesize}
-| | ...
-| | Return From Keyword If | '${framesize}' == 'IMIX_v4_1' | ${353.83333}
-| | Return From Keyword | ${framesize}
-
-| Find NDR using linear search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 linear search with non drop rate.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - start_rate - Initial start rate [pps]. Type: float
-| | ... | - step_rate - Step of linear search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find NDR using linear search and pps \| 64 \| 5000000 \
-| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \|
-| | ...
-| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate}
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Linear Step | ${step_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Linear Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%NDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5)
-| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 50%NDR | ${lat_50p}
-| | Append To List | ${latency} | ${tmp}
-| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1)
-| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 10%NDR | ${lat_10p}
-| | Append To List | ${latency} | ${tmp}
-| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${latency}
-| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
-
-| Find PDR using linear search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 linear search with partial drop rate
-| | ... | with PDR threshold and type specified by parameter.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - start_rate - Initial start rate [pps]. Type: float
-| | ... | - step_rate - Step of linear search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find PDR using linear search and pps \| 64 \| 5000000 \
-| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 0.5 \| percentage \|
-| | ...
-| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate}
-| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames'
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Linear Step | ${step_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Loss Acceptance | ${loss_acceptance}
-| | Run Keyword If | '${loss_acceptance_type}' == 'percentage'
-| | ... | Set Loss Acceptance Type Percentage
-| | Linear Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%PDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency}
-| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | ${loss_acceptance}
-| | ... | ${loss_acceptance_type} | fail_on_loss=${False}
-
-| Find NDR using binary search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 binary search with non drop rate.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - binary_min - Lower boundary of search [pps]. Type: float
-| | ... | - binary_max - Upper boundary of search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - threshold - Threshold to stop search [pps]. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find NDR using binary search and pps \| 64 \| 6000000 \
-| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \|
-| | ...
-| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Binary Convergence Threshold | ${threshold}
-| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%NDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5)
-| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 50%NDR | ${lat_50p}
-| | Append To List | ${latency} | ${tmp}
-| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1)
-| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 10%NDR | ${lat_10p}
-| | Append To List | ${latency} | ${tmp}
-| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${latency}
-| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
-
-| Find PDR using binary search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 binary search with partial drop rate
-| | ... | with PDR threshold and type specified by parameter.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - binary_min - Lower boundary of search [pps]. Type: float
-| | ... | - binary_max - Upper boundary of search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - threshold - Threshold to stop search [pps]. Type: integer
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find PDR using binary search and pps \| 64 \| 6000000 \
-| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \| 0.5 \
-| | ... | \| percentage \|
-| | ...
-| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames'
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Loss Acceptance | ${loss_acceptance}
-| | Run Keyword If | '${loss_acceptance_type}' == 'percentage'
-| | ... | Set Loss Acceptance Type Percentage
-| | Set Binary Convergence Threshold | ${threshold}
-| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%PDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency}
-| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | ${loss_acceptance}
-| | ... | ${loss_acceptance_type} | fail_on_loss=${False}
-
-| Find NDR using combined search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 combined search (linear+binary) with
-| | ... | non drop rate.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - start_rate - Initial start rate [pps]. Type: float
-| | ... | - step_rate - Step of linear search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - threshold - Threshold to stop search [pps]. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find NDR using combined search and pps \| 64 \| 5000000 \
-| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \|
-| | ...
-| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Linear Step | ${step_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Binary Convergence Threshold | ${threshold}
-| | Combined Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%NDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5)
-| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 50%NDR | ${lat_50p}
-| | Append To List | ${latency} | ${tmp}
-| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1)
-| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 10%NDR | ${lat_10p}
-| | Append To List | ${latency} | ${tmp}
-| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${latency}
-| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type}
-| | ... | fail_on_loss=${False}
-
-| Find PDR using combined search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 combined search (linear+binary) with
-| | ... | partial drop rate with PDR threshold and type specified by parameter.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - start_rate - Initial start rate [pps]. Type: float
-| | ... | - step_rate - Step of linear search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - threshold - Threshold to stop search [pps]. Type: integer
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find PDR using combined search and pps \| 64 \| 5000000 \
-| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \| 0.5 \
-| | ... | \| percentage \|
-| | ...
-| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames'
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Linear Step | ${step_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Loss Acceptance | ${loss_acceptance}
-| | Run Keyword If | '${loss_acceptance_type}' == 'percentage'
-| | ... | Set Loss Acceptance Type Percentage
-| | Set Binary Convergence Threshold | ${threshold}
-| | Combined Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%PDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency}
-| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | ${loss_acceptance}
-| | ... | ${loss_acceptance_type} | fail_on_loss=${False}
+*** Variables ***
+| ${trial_duration}= | ${PERF_TRIAL_DURATION}
+| ${trial_multiplicity}= | ${PERF_TRIAL_MULTIPLICITY}
+| ${extended_debug}= | ${EXTENDED_DEBUG}
 
+*** Keywords ***
 | Find NDR and PDR intervals using optimized search
 | | [Documentation]
 | | ... | Find boundaries for RFC2544 compatible NDR and PDR values
 | | ... | using an optimized search algorithm.
-| | ... | Display results as formatted test message.
+| | ... | Display findings as a formatted test message.
 | | ... | Fail if a resulting lower bound has too high loss fraction.
-| | ... | Proceed with Perform additional measurements based on NDRPDR result.
 | | ... | Input rates are understood as uni-directional,
-| | ... | reported result contains bi-directional rates.
-| | ...
-| | ... | TODO: Should the trial duration of the additional
-| | ... | measurements be configurable?
-| | ...
-| | ... | *Arguments:*
+| | ... | reported result contains aggregate rates.
+| | ... | Additional latency measurements are performed for smaller loads,
+| | ... | their results are also displayed.
+| | ... | Finally, two measurements for runtime stats are done (not displayed).
+| | ... | Currently, the min_rate value is hardcoded to 90kpps,
+| | ... | allowing measurement at 10% of the discovered rate
+| | ... | without breaking latency streams.
+| |
+| | ... | *Test (or broader scope) variables read:*
+| | ... | - traffic_profile - Name of module defining traffc for measurements.
+| | ... | Type: string
 | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - minimum_transmit_rate - Lower limit of search [pps]. Type: float
-| | ... | - maximum_transmit_rate - Upper limit of search [pps]. Type: float
+| | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
+| | ... | Type: float
+| |
+| | ... | *Arguments:*
 | | ... | - packet_loss_ratio - Accepted loss during search. Type: float
 | | ... | - final_relative_width - Maximal width multiple of upper. Type: float
 | | ... | - final_trial_duration - Duration of final trials [s]. Type: float
 | | ... | - initial_trial_duration - Duration of initial trials [s]. Type: float
 | | ... | - intermediate phases - Number of intermediate phases [1]. Type: int
 | | ... | - timeout - Fail if search duration is longer [s]. Type: float
-| | ...
+| | ... | - doublings - How many doublings to do when expanding [1]. Type: int
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
+| | ... | Type: int
+| | ... | - latency_duration - Duration for latency-specific trials. Type: float
+| |
 | | ... | *Example:*
-| | ...
-| | ... | \| Find NDR and PDR intervals using optimized search \| \${64} \| \
-| | ... | 3-node-IPv4 \| \${100000} \| \${14880952} \| \${0.005} \| \${0.005} \
-| | ... | \| \${30.0} \| \${1.0} \| \${2} \| ${600.0} \|
-| | ...
-| | [Arguments] | ${frame_size} | ${topology_type} | ${minimum_transmit_rate}
-| | ... | ${maximum_transmit_rate} | ${packet_loss_ratio}=${0.005}
+| |
+| | ... | \| Find NDR and PDR intervals using optimized search \| \${0.005} \
+| | ... | \| \${0.005} \| \${30.0} \| \${1.0} \| \${2} \| \${600.0} \| \${2} \
+| | ... | \| \${2} \| ${5.0} \|
+| |
+| | [Arguments] | ${packet_loss_ratio}=${0.005}
 | | ... | ${final_relative_width}=${0.005} | ${final_trial_duration}=${30.0}
 | | ... | ${initial_trial_duration}=${1.0}
 | | ... | ${number_of_intermediate_phases}=${2} | ${timeout}=${720.0}
-| | ...
+| | ... | ${doublings}=${2} | ${traffic_directions}=${2}
+| | ... | ${latency_duration}=${PERF_TRIAL_LATENCY_DURATION}
+| |
+| | # Latency measurements will need more than 9000 pps.
 | | ${result} = | Perform optimized ndrpdr search | ${frame_size}
-| | ... | ${topology_type} | ${minimum_transmit_rate*2}
-| | ... | ${maximum_transmit_rate*2} | ${packet_loss_ratio}
-| | ... | ${final_relative_width} | ${final_trial_duration}
-| | ... | ${initial_trial_duration} | ${number_of_intermediate_phases}
-| | ... | timeout=${timeout}
-| | Display result of NDRPDR search | ${result} | ${frame_size}
+| | ... | ${traffic_profile} | ${9001} | ${max_rate}
+| | ... | ${packet_loss_ratio} | ${final_relative_width}
+| | ... | ${final_trial_duration} | ${initial_trial_duration}
+| | ... | ${number_of_intermediate_phases} | timeout=${timeout}
+| | ... | doublings=${doublings} | traffic_directions=${traffic_directions}
+| | Display result of NDRPDR search | ${result}
 | | Check NDRPDR interval validity | ${result.pdr_interval}
 | | ... | ${packet_loss_ratio}
 | | Check NDRPDR interval validity | ${result.ndr_interval}
-| | Perform additional measurements based on NDRPDR result
-| | ... | ${result} | ${frame_size} | ${topology_type}
+| | ${pdr_sum}= | Set Variable | ${result.pdr_interval.measured_low.target_tr}
+| | ${pdr_per_stream}= | Evaluate | ${pdr_sum} / float(${traffic_directions})
+| | ${ndr_sum}= | Set Variable | ${result.ndr_interval.measured_low.target_tr}
+| | ${ndr_per_stream}= | Evaluate | ${ndr_sum} / float(${traffic_directions})
+| | ${rate}= | Evaluate | 0.9 * ${pdr_per_stream}
+| | Measure and show latency at specified rate | Latency at 90% PDR:
+| | ... | ${latency_duration} | ${rate} | ${framesize}
+| | ... | ${traffic_profile} | ${traffic_directions}
+| | ${rate}= | Evaluate | 0.5 * ${pdr_per_stream}
+| | Measure and show latency at specified rate | Latency at 50% PDR:
+| | ... | ${latency_duration} | ${rate} | ${framesize}
+| | ... | ${traffic_profile} | ${traffic_directions}
+| | ${rate}= | Evaluate | 0.1 * ${pdr_per_stream}
+| | Measure and show latency at specified rate | Latency at 10% PDR:
+| | ... | ${latency_duration} | ${rate} | ${framesize}
+| | ... | ${traffic_profile} | ${traffic_directions}
+| | Measure and show latency at specified rate | Latency at 0% PDR:
+| | ... | ${latency_duration} | ${0} | ${framesize}
+| | ... | ${traffic_profile} | ${traffic_directions}
+| | # Finally, trials with runtime and other stats.
+| | # We expect NDR and PDR to have different-looking stats.
+| | Send traffic at specified rate
+| | ... | ${1.0} | ${pdr_per_stream} | ${framesize} | ${traffic_profile}
+| | ... | traffic_directions=${traffic_directions}
+| | Send traffic at specified rate
+| | ... | ${1.0} | ${ndr_per_stream} | ${framesize} | ${traffic_profile}
+| | ... | traffic_directions=${traffic_directions}
+
+| Find Throughput Using MLRsearch
+| | [Documentation]
+| | ... | Find and return lower bound PDR (zero PLR by default)
+| | ... | aggregate throughput using MLRsearch algorithm.
+| | ... | Input rates are understood as uni-directional.
+| | ... | Currently, the min_rate value is hardcoded to match test teardowns.
+| |
+| | ... | *Test (or broader scope) variables read:*
+| | ... | - traffic_profile - Name of module defining traffc for measurements.
+| | ... | Type: string
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
+| | ... | Type: float
+| |
+| | ... | *Arguments:*
+| | ... | - packet_loss_ratio - Accepted loss during search. Type: float
+| | ... | - final_relative_width - Maximal width multiple of upper. Type: float
+| | ... | - final_trial_duration - Duration of final trials [s]. Type: float
+| | ... | - initial_trial_duration - Duration of initial trials [s]. Type: float
+| | ... | - intermediate phases - Number of intermediate phases [1]. Type: int
+| | ... | - timeout - Fail if search duration is longer [s]. Type: float
+| | ... | - doublings - How many doublings to do when expanding [1]. Type: int
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
+| | ... | Type: int
+| |
+| | ... | *Returns:*
+| | ... | - Lower bound for bi-directional throughput at given PLR. Type: float
+| |
+| | ... | *Example:*
+| |
+| | ... | \| \${throughpt}= \| Find Throughput Using MLRsearch \| \${0} \
+| | ... | \| \${0.001} \| \${10.0}\| \${1.0} \| \${1} \| \${720.0} \| \${2} \
+| | ... | \| \${2} \|
+| |
+| | [Arguments] | ${packet_loss_ratio}=${0.0}
+| | ... | ${final_relative_width}=${0.001} | ${final_trial_duration}=${10.0}
+| | ... | ${initial_trial_duration}=${1.0}
+| | ... | ${number_of_intermediate_phases}=${1} | ${timeout}=${720.0}
+| | ... | ${doublings}=${2} | ${traffic_directions}=${2}
+| |
+| | ${result} = | Perform optimized ndrpdr search | ${frame_size}
+| | ... | ${traffic_profile} | ${10000} | ${max_rate}
+| | ... | ${packet_loss_ratio} | ${final_relative_width}
+| | ... | ${final_trial_duration} | ${initial_trial_duration}
+| | ... | ${number_of_intermediate_phases} | timeout=${timeout}
+| | ... | doublings=${doublings} | traffic_directions=${traffic_directions}
+| | Check NDRPDR interval validity | ${result.pdr_interval}
+| | ... | ${packet_loss_ratio}
+| | Return From Keyword | ${result.pdr_interval.measured_low.target_tr}
+
+| Find critical load using PLRsearch
+| | [Documentation]
+| | ... | Find boundaries for troughput (of given target loss ratio)
+| | ... | using PLRsearch algorithm.
+| | ... | Display results as formatted test message.
+| | ... | Fail if computed lower bound 110% of the minimal rate or less.
+| | ... | Input rates are understood as uni-directional,
+| | ... | reported result contains aggregate rates.
+| | ... | Currently, the min_rate value is hardcoded to match test teardowns.
+| |
+| | ... | *Test (or broader scope) variables read:*
+| | ... | - traffic_profile - Name of module defining traffc for measurements.
+| | ... | Type: string
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
+| | ... | Type: float
+| |
+| | ... | *Arguments:*
+| | ... | - packet_loss_ratio - Accepted loss during search. Type: float
+| | ... | - timeout - Stop when search duration is longer [s]. Type: float
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
+| | ... | Type: int
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Find critical load using PLR search \| \${1e-7} \| \${120} \
+| | ... | \| \${2} \|
+| |
+| | [Arguments] | ${packet_loss_ratio}=${1e-7} | ${timeout}=${1800.0}
+| | ... | ${traffic_directions}=${2}
+| |
+| | ${min_rate} = | Set Variable | ${10000}
+| | ${average} | ${stdev} = | Perform soak search | ${frame_size}
+| | ... | ${traffic_profile} | ${min_rate} | ${max_rate}
+| | ... | ${packet_loss_ratio} | timeout=${timeout}
+| | ... | traffic_directions=${traffic_directions}
+| | ${lower} | ${upper} = | Display result of soak search
+| | ... | ${average} | ${stdev}
+| | Should Not Be True | 1.1 * ${traffic_directions} * ${min_rate} > ${lower}
+| | ... | Lower bound ${lower} too small for unidirectional minimum ${min_rate}.
 
 | Display single bound
 | | [Documentation]
 | | ... | Display one bound of NDR+PDR search,
 | | ... | in packet per seconds (total and per stream)
-| | ... | and Gbps total bandwidth with untagged packet.
+| | ... | and Gbps total bandwidth (for initial packet size).
 | | ... | Througput is calculated as:
-| | ... | Measured rate per stream * Total number of streams
+| | ... | Sum of measured rates over streams
 | | ... | Bandwidth is calculated as:
-| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
+| | ... | (Throughput * (L2 Frame Size + IPG) * 8)
 | | ... | The given result should contain latency data as well.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - text - Flavor text describing which bound is this. Type: string
 | | ... | - rate_total - Total (not per stream) measured Tr [pps]. Type: float
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - frame_size - L2 Frame Size [B]. Type: integer
 | | ... | - latency - Latency data to display if non-empty. Type: string
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Display single bound \| NDR lower bound \| \${12345.67} \
 | | ... | \| \${64} \| show_latency=\${EMPTY} \|
-| | ...
-| | [Arguments] | ${text} | ${rate_total} | ${framesize} | ${latency}=${EMPTY}
-| | ...
-| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9)
+| |
+| | [Arguments] | ${text} | ${rate_total} | ${frame_size} | ${latency}=${EMPTY}
+| |
+| | ${bandwidth_total} = | Evaluate | ${rate_total} * (${frame_size}+20)*8 / 1e9
 | | Set Test Message | ${\n}${text}: ${rate_total} pps, | append=yes
-| | Set Test Message | ${bandwidth_total} Gbps (untagged) | append=yes
+| | Set Test Message | ${bandwidth_total} Gbps (initial) | append=yes
 | | Return From Keyword If | not """${latency}"""
-| | Set Test Message | ${\n}LATENCY usec [min/avg/max] per stream: ${latency}
+| | Set Test Message | ${\n}LATENCY [min/avg/max/hdrh] per stream: ${latency}
 | | ... | append=yes
 
+| Display Reconfig Test Message
+| | [Documentation]
+| | ... | Display the number of packets lost (bidirectionally)
+| | ... | due to reconfiguration under traffic.
+| |
+| | ... | *Arguments:*
+| | ... | - result - Result of bidirectional measurtement.
+| | ... | Type: ReceiveRateMeasurement
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Display Reconfig Test Message \| \${result} \|
+| |
+| | [Arguments] | ${result}
+| |
+| | Set Test Message | Packets lost due to reconfig: ${result.loss_count}
+| | ${time_lost} = | Evaluate | ${result.loss_count} / ${result.target_tr}
+| | Set Test Message | ${\n}Implied time lost: ${time_lost} | append=yes
+
 | Display result of NDRPDR search
 | | [Documentation]
 | | ... | Display result of NDR+PDR search, both quantities, both bounds,
-| | ... | in packet per seconds (total and per stream)
-| | ... | and Gbps total bandwidth with untagged packet.
+| | ... | aggregate in packet per seconds
+| | ... | and Gbps total bandwidth (for initial packet size).
 | | ... | Througput is calculated as:
-| | ... | Measured rate per stream * Total number of streams
+| | ... | Sum of measured rate over streams
 | | ... | Bandwidth is calculated as:
-| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
+| | ... | (Throughput * (L2 Frame Size + IPG) * 8)
 | | ... | The given result should contain latency data as well.
-| | ...
+| |
+| | ... | *Test (or broader scope) variables read:*
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
 | | ... | *Arguments:*
 | | ... | - result - Measured result data per stream [pps]. Type: NdrPdrResult
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
-| | ... | \| Display result of NDRPDR search \| \${result} \| \${64} \|
-| | ...
-| | [Arguments] | ${result} | ${framesize}
-| | ...
-| | ${framesize}= | Get Frame Size | ${framesize}
+| |
+| | ... | \| Display result of NDRPDR search \| \${result} \|
+| |
+| | [Arguments] | ${result}
+| |
+| | ${frame_size} = | Get Average Frame Size | ${frame_size}
 | | Display single bound | NDR_LOWER
-| | ... | ${result.ndr_interval.measured_low.transmit_rate} | ${framesize}
+| | ... | ${result.ndr_interval.measured_low.target_tr} | ${frame_size}
 | | ... | ${result.ndr_interval.measured_low.latency}
 | | Display single bound | NDR_UPPER
-| | ... | ${result.ndr_interval.measured_high.transmit_rate} | ${framesize}
+| | ... | ${result.ndr_interval.measured_high.target_tr} | ${frame_size}
 | | Display single bound | PDR_LOWER
-| | ... | ${result.pdr_interval.measured_low.transmit_rate} | ${framesize}
+| | ... | ${result.pdr_interval.measured_low.target_tr} | ${frame_size}
 | | ... | ${result.pdr_interval.measured_low.latency}
 | | Display single bound | PDR_UPPER
-| | ... | ${result.pdr_interval.measured_high.transmit_rate} | ${framesize}
+| | ... | ${result.pdr_interval.measured_high.target_tr} | ${frame_size}
+
+| Display result of soak search
+| | [Documentation]
+| | ... | Display result of soak search, avg+-stdev, as upper/lower bounds,
+| | ... | in aggregate packets per seconds
+| | ... | and Gbps total bandwidth (for initial packet size).
+| | ... | Througput is calculated as:
+| | ... | Sum of measured rates over streams
+| | ... | Bandwidth is calculated as:
+| | ... | (Throughput * (L2 Frame Size + IPG) * 8)
+| |
+| | ... | *Test (or broader scope) variables read:*
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | *Arguments:*
+| | ... | - avg - Estimated average critical load [pps]. Type: float
+| | ... | - stdev - Standard deviation of critical load [pps]. Type: float
+| |
+| | ... | *Returns:*
+| | ... | - Lower and upper bound of critical load [pps]. Type: 2-tuple of float
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Display result of soak search \| \${100000} \| \${100} \|
+| |
+| | [Arguments] | ${avg} | ${stdev}
+| |
+| | ${frame_size} = | Get Average Frame Size | ${frame_size}
+| | ${avg} = | Convert To Number | ${avg}
+| | ${stdev} = | Convert To Number | ${stdev}
+| | ${lower} = | Evaluate | ${avg} - ${stdev}
+| | ${upper} = | Evaluate | ${avg} + ${stdev}
+| | Display single bound | PLRsearch lower bound | ${lower} | ${frame_size}
+| | Display single bound | PLRsearch upper bound | ${upper} | ${frame_size}
+| | Return From Keyword | ${lower} | ${upper}
 
 | Check NDRPDR interval validity
 | | [Documentation]
 | | ... | Extract loss ratio of lower bound of the interval.
 | | ... | Fail if it does not reach the allowed value.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - interval - Measured interval. Type: ReceiveRateInterval
 | | ... | - packet_loss_ratio - Accepted loss (0.0 for NDR). Type: float
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Check NDRPDR interval validity \| \${result.pdr_interval} \
 | | ... | \| \${0.005} \|
-| | ...
+| |
 | | [Arguments] | ${interval} | ${packet_loss_ratio}=${0.0}
-| | ...
+| |
 | | ${lower_bound} = | Set Variable | ${interval.measured_low}
 | | ${lower_bound_lf} = | Set Variable | ${lower_bound.loss_fraction}
 | | Return From Keyword If | ${lower_bound_lf} <= ${packet_loss_ratio}
@@ -587,268 +355,296 @@
 | | ... | ${message}${\n}${message_zero} | ${message}${\n}${message_other}
 | | Fail | ${message}
 
-| Perform additional measurements based on NDRPDR result
-| | [Documentation]
-| | ... | Perform any additional measurements which are not directly needed
-| | ... | for determining NDR nor PDR, but which are needed for gathering
-| | ... | additional data for debug purposes.
-| | ... | Currently, just "Traffic should pass with no loss" is called.
-| | ... | TODO: Move latency measurements from optimized search here.
-| | ...
-| | ... | *Arguments:*
-| | ... | - result - Measured result data per stream [pps]. Type: NdrPdrResult
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
-| | ... | - topology_type - Topology type. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Perform additional measurements based on NDRPDR result \
-| | ... | \| \${result} \| ${64} \| 3-node-IPv4 \|
-| | ...
-| | [Arguments] | ${result} | ${framesize} | ${topology_type}
-| | ...
-| | ${duration}= | Set Variable | 5.0
-| | ${rate_per_stream}= | Evaluate
-| | ... | ${result.ndr_interval.measured_low.target_tr} / 2.0
-| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
-
-| Display result of NDR search
-| | [Documentation]
-| | ... | Display result of NDR search in packet per seconds (total and per
-| | ... | stream) and Gbps total bandwidth with untagged packet.
-| | ... | Througput is calculated as:
-| | ... | Measured rate per stream * Total number of streams
-| | ... | Bandwidth is calculated as:
-| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
-| | ...
-| | ... | *Arguments:*
-| | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - nr_streams - Total number of streams. Type: integer
-| | ... | - latency - Latency stats. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Display result of NDR search \| 4400000 \| 64 \| 2 \
-| | ... | \| [100%NDR, [10/10/10, 1/2/3]] \|
-| | ...
-| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams} | ${latency}
-| | ...
-| | ${framesize}= | Get Frame Size | ${framesize}
-| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams}
-| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9)
-| | Set Test Message | FINAL_RATE: ${rate_total} pps
-| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes
-| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged)
-| | ... | append=yes
-| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes
-| | :FOR | ${lat} | IN | @{latency}
-| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes
-
-| Display result of PDR search
-| | [Documentation]
-| | ... | Display result of PDR search in packet per seconds (total and per
-| | ... | stream) and Gbps total bandwidth with untagged packet.
-| | ... | Througput is calculated as:
-| | ... | Measured rate per stream * Total number of streams
-| | ... | Bandwidth is calculated as:
-| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
-| | ...
-| | ... | *Arguments:*
-| | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - nr_streams - Total number of streams. Type: integer
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ... | - latency - Latency stats. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Display result of PDR search \| 4400000 \| 64 \| 2 \| 0.5 \
-| | ... | \| percentage \| [100%NDR, [10/10/10, 1/2/3]] \|
-| | ...
-| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams}
-| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency}
-| | ...
-| | ${framesize}= | Get Frame Size | ${framesize}
-| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams}
-| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9)
-| | Set Test Message | FINAL_RATE: ${rate_total} pps
-| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes
-| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged)
-| | ... | append=yes
-| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes
-| | :FOR | ${lat} | IN | @{latency}
-| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes
-| | Set Test Message
-| | ... | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type}
-| | ... | append=yes
-
-| Measure latency pps
-| | [Documentation]
-| | ... | Send traffic at specified rate. Measure min/avg/max latency
-| | ...
-| | ... | *Arguments:*
-| | ... | - duration - Duration of traffic run [s]. Type: integer
-| | ... | - rate - Rate for sending packets. Type: integer
-| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
-| | ... | - topology_type - Topology type. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Measure latency \| 10 \| 4.0 \| 64 \| 3-node-IPv4 \|
-| | ...
-| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
-| | ...
-| | Return From Keyword If | ${rate} <= 10000 | ${-1}
-| | Send traffic on tg | ${duration} | ${rate}pps | ${framesize}
-| | ... | ${topology_type} | warmup_time=0
-| | Run keyword and return | Get latency
-
-| Traffic should pass with no loss
-| | [Documentation]
-| | ... | Send traffic at specified rate. No packet loss is accepted at loss
-| | ... | evaluation.
-| | ...
-| | ... | *Arguments:*
-| | ... | - duration - Duration of traffic run [s]. Type: integer
-| | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - fail_on_loss - If True, the keyword fails if loss occurred.
-| | ... | Type: boolean
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Traffic should pass with no loss \| 10 \| 4.0mpps \| 64 \
-| | ... | \| 3-node-IPv4 \|
-| | ...
-| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
-| | ... | ${fail_on_loss}=${True}
-| | ...
-| | Send traffic at specified rate | ${duration} | ${rate} | ${framesize}
-| | ... | ${topology_type}
-| | Run Keyword If | ${fail_on_loss} | No traffic loss occurred
-
-| Traffic should pass with partial loss
-| | [Documentation]
-| | ... | Send traffic at specified rate. Partial packet loss is accepted
-| | ... | within loss acceptance value specified as argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - duration - Duration of traffic run [s]. Type: integer
-| | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Traffic should pass with partial loss \| 10 \| 4.0mpps \| 64 \
-| | ... | \| 3-node-IPv4 \| 0.5 \| percentage \|
-| | ...
-| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
-| | ... | ${loss_acceptance} | ${loss_acceptance_type}
-| | ... | ${fail_on_loss}=${True}
-| | ...
-| | Send traffic at specified rate | ${duration} | ${rate} | ${framesize}
-| | ... | ${topology_type}
-| | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted
-| | ... | ${loss_acceptance} | ${loss_acceptance_type}
-
 | Traffic should pass with maximum rate
 | | [Documentation]
 | | ... | Send traffic at maximum rate.
-| | ...
+| |
+| | ... | *Test (or broader scope) variables read:*
+| | ... | - traffic_profile - Name of module defining traffc for measurements.
+| | ... | Type: string
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
+| | ... | Type: float
+| |
 | | ... | *Arguments:*
-| | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - subsamples - How many trials in this measurement. Type:int
-| | ... | - trial_duration - Duration of single trial [s]. Type: float
-| | ... | - fail_no_traffic - Whether to fail on zero receive count. Type: boolean
-| | ...
+| | ... | - trial_duration - Duration of single trial [s].
+| | ... | Type: float
+| | ... | - fail_no_traffic - Whether to fail on zero receive count.
+| | ... | Type: boolean
+| | ... | - trial_multiplicity - How many trials in this measurement.
+| | ... | Type: int
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
+| | ... | Type: int
+| | ... | - tx_port - TX port of TG, default 0.
+| | ... | Type: integer
+| | ... | - rx_port - RX port of TG, default 1.
+| | ... | Type: integer
+| |
 | | ... | *Example:*
-| | ...
-| | ... | \| Traffic should pass with maximum rate \| 4.0mpps \| 64 \
-| | ... | \| 3-node-IPv4 \| ${1} \| ${10.0} | ${False} \|
-| | ...
-| | [Arguments] | ${rate} | ${framesize} | ${topology_type}
-| | ... | ${trial_duration}=${perf_trial_duration} | ${fail_no_traffic}=${True}
-| | ... | ${subsamples}=${perf_trial_multiplicity}
-| | ...
-| | ${results} = | Send traffic at specified rate | ${trial_duration} | ${rate}
-| | ... | ${framesize} | ${topology_type} | ${subsamples}
+| |
+| | ... | \| Traffic should pass with maximum rate \| \${1} \| \${10.0} \
+| | ... | \| \${False} \| \${2} \| \${0} \| \${1} \|
+| |
+| | [Arguments] | ${trial_duration}=${trial_duration}
+| | ... | ${fail_no_traffic}=${True}
+| | ... | ${trial_multiplicity}=${trial_multiplicity}
+| | ... | ${traffic_directions}=${2} | ${tx_port}=${0} | ${rx_port}=${1}
+| | ... | ${latency}=${True}
+| |
+| | ${results}= | Send traffic at specified rate
+| | ... | ${trial_duration} | ${max_rate} | ${frame_size}
+| | ... | ${traffic_profile} | ${trial_multiplicity}
+| | ... | ${traffic_directions} | ${tx_port} | ${rx_port} | latency=${latency}
 | | Set Test Message | ${\n}Maximum Receive Rate trial results
 | | Set Test Message | in packets per second: ${results}
 | | ... | append=yes
-| | # TODO: Should we also report the percentage relative to transmit rate,
-| | # so that people looking at console can decide how close to 100% it is?
 | | Run Keyword If | ${fail_no_traffic} | Fail if no traffic forwarded
 
 | Send traffic at specified rate
 | | [Documentation]
-| | ... | Send traffic at specified rate.
+| | ... | Perform a warmup, show runtime counters during it.
+| | ... | Then send traffic at specified rate, possibly multiple trials.
+| | ... | Show various DUT stats, optionally also packet trace.
 | | ... | Return list of measured receive rates.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - trial_duration - Duration of single trial [s]. Type: float
-| | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B]. Type: integer/string
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - subsamples - How many trials in this measurement. Type: int
-| | ...
+| | ... | - rate - Target aggregate transmit rate [pps] / Connections per second
+| | ... | (CPS) for UDP/TCP flows. Type: float
+| | ... | - frame_size - L2 Frame Size [B]. Type: integer/string
+| | ... | - traffic_profile - Name of module defining traffc for measurements.
+| | ... | Type: string
+| | ... | - trial_multiplicity - How many trials in this measurement.
+| | ... | Type: int
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
+| | ... | Type: int
+| | ... | - tx_port - TX port of TG, default 0.
+| | ... | Type: integer
+| | ... | - rx_port - RX port of TG, default 1.
+| | ... | Type: integer
+| | ... | - extended_debug- True to enable extended debug.
+| | ... | Type: boolean
+| |
 | | ... | *Example:*
-| | ...
-| | ... | \| Send traffic at specified rate \| ${1.0} \| 4.0mpps \| 64 \
-| | ... | \| 3-node-IPv4 \| ${10} \|
-| | ...
-| | [Arguments] | ${trial_duration} | ${rate} | ${framesize}
-| | ... | ${topology_type} | ${subsamples}=${1}
-| | ...
+| |
+| | ... | \| Send traffic at specified rate \| \${1.0} \| ${4000000.0} \
+| | ... | \| \${64} \| 3-node-IPv4 \| \${10} \| \${2} \| \${0} \| \${1} \
+| | ... | \${False} \|
+| |
+| | [Arguments] | ${trial_duration} | ${rate} | ${frame_size}
+| | ... | ${traffic_profile} | ${trial_multiplicity}=${trial_multiplicity}
+| | ... | ${traffic_directions}=${2} | ${tx_port}=${0} | ${rx_port}=${1}
+| | ... | ${extended_debug}=${extended_debug} | ${latency}=${True}
+| |
+| | Set Test Variable | ${extended_debug}
 | | Clear and show runtime counters with running traffic | ${trial_duration}
-| | ... | ${rate} | ${framesize} | ${topology_type}
-| | Run Keyword If | ${dut_stats}==${True} | Clear all counters on all DUTs
-| | Run Keyword If | ${dut_stats}==${True} and ${pkt_trace}==${True}
-| | ... | VPP Enable Traces On All DUTs | ${nodes}
+| | ... | ${rate} | ${frame_size} | ${traffic_profile}
+| | ... | ${traffic_directions} | ${tx_port} | ${rx_port}
+| | FOR | ${action} | IN | @{pre_stats}
+| | | Run Keyword | Additional Statistics Action For ${action}
+| | END
 | | ${results} = | Create List
-| | :FOR | ${i} | IN RANGE | ${subsamples}
-| | | Send traffic on tg | ${trial_duration} | ${rate} | ${framesize}
-| | | ... | ${topology_type} | warmup_time=0
+| | FOR | ${i} | IN RANGE | ${trial_multiplicity}
+| | | # The following line is skipping some default arguments,
+| | | # that is why subsequent arguments have to be named.
+| | | Send traffic on tg | ${trial_duration} | ${rate} | ${frame_size}
+| | | ... | ${traffic_profile} | warmup_time=${0}
+| | | ... | traffic_directions=${traffic_directions} | tx_port=${tx_port}
+| | | ... | rx_port=${rx_port} | latency=${latency}
 | | | ${rx} = | Get Received
 | | | ${rr} = | Evaluate | ${rx} / ${trial_duration}
 | | | Append To List | ${results} | ${rr}
-| | Run Keyword If | ${dut_stats}==${True} | Show statistics on all DUTs
-| | ... | ${nodes}
-| | Run Keyword If | ${dut_stats}==${True} and ${pkt_trace}==${True}
-| | ... | Show Packet Trace On All Duts | ${nodes} | maximum=${100}
+| | END
+| | FOR | ${action} | IN | @{post_stats}
+| | | Run Keyword | Additional Statistics Action For ${action}
+| | END
 | | Return From Keyword | ${results}
 
+| Measure and show latency at specified rate
+| | [Documentation]
+| | ... | Send traffic at specified rate, single trial.
+| | ... | Extract latency information and append it to text message.
+| | ... | The rate argument is int, so should not include "pps".
+| | ... | If the given rate is too low, a safe value is used instead.
+| |
+| | ... | *Arguments:*
+| | ... | - message_prefix - Preface to test message addition. Type: string
+| | ... | - trial_duration - Duration of single trial [s]. Type: float
+| | ... | - rate - Rate [pps] for sending packets in case of T-Rex stateless
+| | ... | mode or multiplier of profile CPS in case of T-Rex astf mode.
+| | ... | Type: float
+| | ... | - frame_size - L2 Frame Size [B]. Type: integer/string
+| | ... | - traffic_profile - Name of module defining traffic for measurements.
+| | ... | Type: string
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
+| | ... | Type: int
+| | ... | - tx_port - TX port of TG, default 0. Type: integer
+| | ... | - rx_port - RX port of TG, default 1. Type: integer
+| | ... | - safe_rate - To apply if rate is below this, as latency pps is fixed.
+| | ... | In pps, type int.
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Measure and show latency at specified rate \| Latency at 90% NDR \
+| | ... | \| \${1.0} \| ${10000000} \| \${64} \| 3-node-IPv4 \| \${2} \
+| | ... | \| \${0} \| \${1} \| ${9500} \|
+| |
+| | [Arguments] | ${message_prefix} | ${trial_duration} | ${rate}
+| | ... | ${frame_size} | ${traffic_profile} | ${traffic_directions}=${2}
+| | ... | ${tx_port}=${0} | ${rx_port}=${1} | ${safe_rate}=${9001}
+| |
+| | ${real_rate} = | Evaluate | max(${rate}, ${safe_rate})
+| | # The following line is skipping some default arguments,
+| | # that is why subsequent arguments have to be named.
+| | Send traffic on tg | ${trial_duration} | ${real_rate} | ${frame_size}
+| | ... | ${traffic_profile} | warmup_time=${0}
+| | ... | traffic_directions=${traffic_directions} | tx_port=${tx_port}
+| | ... | rx_port=${rx_port}
+| | ${latency} = | Get Latency Int
+| | Set Test Message | ${\n}${message_prefix} ${latency} | append=${True}
+
 | Clear and show runtime counters with running traffic
 | | [Documentation]
 | | ... | Start traffic at specified rate then clear runtime counters on all
 | | ... | DUTs. Wait for specified amount of time and capture runtime counters
 | | ... | on all DUTs. Finally stop traffic
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - duration - Duration of traffic run [s]. Type: integer
-| | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
-| | ... | - topology_type - Topology type. Type: string
-| | ...
+| | ... | - rate - Rate [pps] for sending packets in case of T-Rex stateless
+| | ... | mode or multiplier of profile CPS in case of T-Rex astf mode.
+| | ... | Type: float
+| | ... | - frame_size - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
+| | ... | - traffic_profile - Name of module defining traffc for measurements.
+| | ... | Type: string
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
+| | ... | Type: int
+| | ... | - tx_port - TX port of TG, default 0. Type: integer
+| | ... | - rx_port - RX port of TG, default 1. Type: integer
+| |
 | | ... | *Example:*
-| | ...
-| | ... | \| Traffic should pass with partial loss \| 10 \| 4.0mpps \| 64 \
-| | ... | \| 3-node-IPv4 \| 0.5 \| percentage \|
-| | ...
-| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
-| | ...
-| | Send traffic on tg | -1 | ${rate} | ${framesize} | ${topology_type}
-| | ... | warmup_time=0 | async_call=${True} | latency=${False}
-| | Run Keyword If | ${dut_stats}==${True}
-| | ... | Clear runtime counters on all DUTs | ${nodes}
+| |
+| | ... | \| Clear and show runtime counters with running traffic \| \${10} \
+| | ... | \| ${4000000.0} \| \${64} \| 3-node-IPv4 \| \${2} \| \${0} \| \${1} \|
+| |
+| | [Arguments] | ${duration} | ${rate} | ${frame_size} | ${traffic_profile}
+| | ... | ${traffic_directions}=${2} | ${tx_port}=${0} | ${rx_port}=${1}
+| |
+| | # Duration of -1 means we will stop traffic manually.
+| | Send traffic on tg | ${-1} | ${rate} | ${frame_size} | ${traffic_profile}
+| | ... | warmup_time=${0} | async_call=${True} | latency=${False}
+| | ... | traffic_directions=${traffic_directions} | tx_port=${tx_port}
+| | ... | rx_port=${rx_port}
+| | FOR | ${action} | IN | @{pre_run_stats}
+| | | Run Keyword | Additional Statistics Action For ${action}
+| | END
 | | Sleep | ${duration}
-| | Run Keyword If | ${dut_stats}==${True}
-| | ... | Show runtime counters on all DUTs | ${nodes}
+| | FOR | ${action} | IN | @{post_run_stats}
+| | | Run Keyword | Additional Statistics Action For ${action}
+| | END
 | | Stop traffic on tg
+
+| Start Traffic on Background
+| | [Documentation]
+| | ... | Start traffic at specified rate then return control to Robot.
+| | ... | This keyword is useful if the test needs to do something
+| | ... | while traffic is running.
+| |
+| | ... | *Test (or broader scope) variables read:*
+| | ... | - traffic_profile - Name of module defining traffc for measurements.
+| | ... | Type: string
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | *Arguments:*
+| | ... | - rate - Rate [pps] for sending packets in case of T-Rex stateless
+| | ... | mode or multiplier of profile CPS in case of T-Rex astf mode.
+| | ... | Type: float
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
+| | ... | Type: int
+| | ... | - tx_port - TX port of TG, default 0. Type: integer
+| | ... | - rx_port - RX port of TG, default 1. Type: integer
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Start Traffic on Background \| ${4000000.0} \| \${2} \| \${0} \
+| | ... | \| \${1} \|
+| |
+| | [Arguments] | ${rate} | ${traffic_directions}=${2} | ${tx_port}=${0}
+| | ... | ${rx_port}=${1}
+| |
+| | # Duration of -1 means we will stop traffic manually.
+| | Send traffic on tg | ${-1} | ${rate} | ${frame_size} | ${traffic_profile}
+| | ... | warmup_time=${0} | async_call=${True} | latency=${False}
+| | ... | traffic_directions=${traffic_directions} | tx_port=${tx_port}
+| | ... | rx_port=${rx_port}
+
+| Stop Running Traffic
+| | [Documentation]
+| | ... | Stop the running traffic, return measurement result.
+| | ... | For bidirectional traffic, the reported values are bi-directional.
+| |
+| | ... | *Returns:*
+| | ... | - Measurement result. Type: ReceiveRateMeasurement
+| |
+| | ... | *Example:*
+| |
+| | ... | \${result}= \| Stop Running Traffic \|
+| |
+| | ${result}= | Stop traffic on tg
+| | Return From Keyword | ${result}
+
+| Additional Statistics Action For vpp-clear-stats
+| | [Documentation]
+| | ... | Additional Statistics Action for clear VPP statistics.
+| |
+| | Clear Statistics On All DUTs | ${nodes}
+
+| Additional Statistics Action For vpp-show-stats
+| | [Documentation]
+| | ... | Additional Statistics Action for show VPP statistics.
+| |
+| | Show Statistics On All DUTs | ${nodes}
+
+| Additional Statistics Action For vpp-clear-runtime
+| | [Documentation]
+| | ... | Additional Statistics Action for clear VPP runtime.
+| |
+| | VPP Clear Runtime On All DUTs | ${nodes}
+
+| Additional Statistics Action For vpp-show-runtime
+| | [Documentation]
+| | ... | Additional Statistics Action for show VPP runtime.
+| |
+| | VPP Show Runtime On All DUTs | ${nodes}
+
+| Additional Statistics Action For vpp-enable-packettrace
+| | [Documentation]
+| | ... | Additional Statistics Action for enable VPP packet trace.
+| |
+| | Run Keyword If | ${extended_debug}==${True}
+| | ... | VPP Enable Traces On All DUTs | ${nodes} | fail_on_error=${False}
+
+| Additional Statistics Action For vpp-show-packettrace
+| | [Documentation]
+| | ... | Additional Statistics Action for show VPP packet trace.
+| |
+| | Run Keyword If | ${extended_debug}==${True}
+| | ... | Show Packet Trace On All Duts | ${nodes} | maximum=${100}
+
+| Additional Statistics Action For vpp-enable-elog
+| | [Documentation]
+| | ... | Additional Statistics Action for enable VPP elog trace.
+| |
+| | VPP Enable Elog Traces On All DUTs | ${nodes}
+
+| Additional Statistics Action For vpp-show-elog
+| | [Documentation]
+| | ... | Additional Statistics Action for show VPP elog trace.
+| |
+| | Show Event Logger On All DUTs | ${nodes}
+
+| Additional Statistics Action For bash-perf-stat
+| | [Documentation]
+| | ... | Additional Statistics Action for bash command "perf stat".
+| |
+| | Run Keyword If | ${extended_debug}==${True}
+| | ... | Perf Stat On All DUTs | ${nodes}
\ No newline at end of file