X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fvxlan.robot;fp=resources%2Flibraries%2Frobot%2Fvxlan.robot;h=0000000000000000000000000000000000000000;hp=d867189a1518d3126188032361b91fae97fbd782;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hpb=859157b5db45927c7b4bb0b2d575e68805777a86

diff --git a/resources/libraries/robot/vxlan.robot b/resources/libraries/robot/vxlan.robot
deleted file mode 100644
index d867189a15..0000000000
--- a/resources/libraries/robot/vxlan.robot
+++ /dev/null
@@ -1,135 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library  | Collections
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/bridge_domain.robot
-| Resource | resources/libraries/robot/l2_xconnect.robot
-| Library  | resources.libraries.python.L2Util
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.IPv4Util
-| Library  | resources.libraries.python.IPv6Util
-| Library  | resources.libraries.python.IPv4Setup
-| Library  | resources.libraries.python.NodePath
-
-*** Keywords ***
-| Configure IP addresses and neighbors on interfaces
-| | [Documentation] | *Set IPv4 addresses on interfaces on DUTs.*
-| | ... | If interface index is None then is determines with Get Interface Sw Index
-| | ... | in this case it is required the interface to be present in topology dict.
-| | ... | It also executes VPP IP Probe to determine MACs to IPs on DUTs
-| | ...
-| | ... | _Set testcase variables with IP addresses and prefix length:_
-| | ... | - ${dut1s_ip_address}
-| | ... | - ${dut2s_ip_address}
-| | ... | - ${duts_ip_address_prefix}
-| | ...
-| | [Arguments] | ${DUT1} | ${DUT1_INT_NAME} | ${DUT1_INT_INDEX}
-| | ...         | ${DUT2} | ${DUT2_INT_NAME} | ${DUT2_INT_INDEX}
-| | Set Test Variable | ${dut1s_ip_address} | 172.16.0.1
-| | Set Test Variable | ${dut2s_ip_address} | 172.16.0.2
-| | Set Test Variable | ${duts_ip_address_prefix} | 24
-| | ${DUT1_INT_KEY}= | Run Keyword If | ${DUT1_INT_INDEX} is None
-| |                  | ... | Get Interface by name | ${DUT1} | ${DUT1_INT_NAME}
-| | ${DUT2_INT_KEY}= | Run Keyword If | ${DUT2_INT_INDEX} is None
-| |                  | ... | Get Interface by name | ${DUT2} | ${DUT2_INT_NAME}
-| | ${DUT1_INT_INDEX}= | Run Keyword If | ${DUT1_INT_INDEX} is None
-| |                    | ... | Get Interface Sw Index | ${DUT1} | ${DUT1_INT_KEY}
-| |                    | ... | ELSE | Set Variable | ${DUT1_INT_INDEX}
-| | ${DUT2_INT_INDEX}= | Run Keyword If | ${DUT2_INT_INDEX} is None
-| |                    | ... | Get Interface Sw Index | ${DUT2} | ${DUT2_INT_KEY}
-| |                    | ... | ELSE | Set Variable | ${DUT2_INT_INDEX}
-| | ${DUT1_INT_MAC}= | Vpp Get Interface Mac | ${DUT1} | ${DUT1_INT_INDEX}
-| | ${DUT2_INT_MAC}= | Vpp Get Interface Mac | ${DUT2} | ${DUT2_INT_INDEX}
-| | Set Interface Address | ${DUT1} | ${DUT1_INT_INDEX}
-| | ... | ${dut1s_ip_address} | ${duts_ip_address_prefix}
-| | Set Interface Address | ${DUT2} | ${DUT2_INT_INDEX}
-| | ... | ${dut2s_ip_address} | ${duts_ip_address_prefix}
-| | Add IP Neighbor | ${DUT1} | ${DUT1_INT_INDEX} | ${dut2s_ip_address} | ${DUT2_INT_MAC}
-| | Add IP Neighbor | ${DUT2} | ${DUT2_INT_INDEX} | ${dut1s_ip_address} | ${DUT1_INT_MAC}
-
-| Add interfaces to L2BD
-| | [Arguments] | ${DUT} | ${BID} | ${INTERFACE_1} | ${INTERFACE_2}
-| | Vpp Add L2 Bridge Domain | ${DUT} | ${BID} | ${INTERFACE_1} | ${INTERFACE_2}
-
-| Create vlan interfaces for VXLAN
-| | [Documentation] | *Create VLAN subinterface on interfaces on DUTs with given VLAN ID.*
-| | ...
-| | ... | _Set testcase variables with name and index of created interfaces:_
-| | ... | - ${dut1s_vlan_name}
-| | ... | - ${dut1s_vlan_index}
-| | ... | - ${dut2s_vlan_name}
-| | ... | - ${dut2s_vlan_index}
-| | ...
-| | [Arguments] | ${VLAN} | ${DUT1} | ${INT1} | ${DUT2} | ${INT2}
-| | ${INT1_NAME}= | Get interface name | ${DUT1} | ${INT1}
-| | ${INT2_NAME}= | Get interface name | ${DUT2} | ${INT2}
-| | ${dut1s_vlan_name} | ${dut1s_vlan_index}= | Create Vlan Subinterface
-| |                    | ...                  | ${DUT1} | ${INT1_NAME} | ${VLAN}
-| | ${dut2s_vlan_name} | ${dut2s_vlan_index}= | Create Vlan Subinterface
-| |                    | ...                  | ${DUT2} | ${INT2_NAME} | ${VLAN}
-| | Set Interface State | ${DUT1} | ${dut1s_vlan_index} | up
-| | Set Interface State | ${DUT2} | ${dut2s_vlan_index} | up
-| | Set Test Variable | ${dut1s_vlan_name}
-| | Set Test Variable | ${dut1s_vlan_index}
-| | Set Test Variable | ${dut2s_vlan_name}
-| | Set Test Variable | ${dut2s_vlan_index}
-
-| Send VXLAN encapsulated packet and verify received packet
-| | [Documentation] | Send VXLAN encapsulated Ethernet frame and check \
-| | ... | received one.
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_node - Node where to run traffic script. Type: dictionary
-| | ... | - tx_if - Interface from where send VXLAN packet. Type: string
-| | ... | - rx_if - Interface where receive VXLAN packet. Type: string
-| | ... | - tx_src_mac - Source MAC address of sent packet. Type: string
-| | ... | - tx_dst_mac - Destination MAC address of sent packet. Type: string
-| | ... | - tx_src_ip - Source IP address of sent VXLAN packet. Type: string
-| | ... | - tx_dst_ip - Destination IP address of sent VXLAN packet.
-| | ... | Type: string
-| | ... | - tx_vni - VNI of sent VXLAN packet. Type: string
-| | ... | - rx_src_ip - Source IP address of received VXLAN packet. Type: string
-| | ... | - rx_dst_ip - Destination IP address of received VXLAN packet.
-| | ... | Type: string
-| | ... | - rx_vni - VNI of received VXLAN packet. Type: string
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send VXLAN encapsulated packet and verify received packet \| ${tg_node} \| port4 \| port4  \
-| | ... | \| fa:16:3e:6d:f9:c5 \| fa:16:3e:e6:6d:9a \| 192.168.0.1  \
-| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| ${102} \|
-| | ...
-| | [Arguments] | ${tg_node} | ${tx_if} | ${rx_if}
-| | ... | ${tx_src_mac} | ${tx_dst_mac}
-| | ... | ${tx_src_ip} | ${tx_dst_ip} | ${tx_vni}
-| | ... | ${rx_src_ip} | ${rx_dst_ip} | ${rx_vni}
-| | ${tx_if_name}= | Get interface name | ${tg_node} | ${tx_if}
-| | ${rx_if_name}= | Get interface name | ${tg_node} | ${rx_if}
-| | ${args}= | Catenate
-| | ... | --tx_if ${tx_if_name}
-| | ... | --rx_if ${rx_if_name}
-| | ... | --tx_src_mac ${tx_src_mac}
-| | ... | --tx_dst_mac ${tx_dst_mac}
-| | ... | --tx_src_ip ${tx_src_ip}
-| | ... | --tx_dst_ip ${tx_dst_ip}
-| | ... | --tx_vni ${tx_vni}
-| | ... | --rx_src_ip ${rx_src_ip}
-| | ... | --rx_dst_ip ${rx_dst_ip}
-| | ... | --rx_vni ${rx_vni}
-| | Run Traffic Script On Node | send_vxlan_check_vxlan.py | ${tg_node} | ${args}