X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Ftools%2Fdisk-image-builder%2Fubuntu%2Fhtml%2Fpreseed.cfg;fp=resources%2Ftools%2Fdisk-image-builder%2Fubuntu%2Fhtml%2Fpreseed.cfg;h=0000000000000000000000000000000000000000;hp=280757a64789f2a37839cefdeaa00f7f6d134a1b;hb=53fb7dad59b185992aaed1ec2e470c547693caf2;hpb=7482d7a93bf3f7af2f82d2986deaf83f3cd65f92 diff --git a/resources/tools/disk-image-builder/ubuntu/html/preseed.cfg b/resources/tools/disk-image-builder/ubuntu/html/preseed.cfg deleted file mode 100644 index 280757a647..0000000000 --- a/resources/tools/disk-image-builder/ubuntu/html/preseed.cfg +++ /dev/null @@ -1,503 +0,0 @@ -#### Contents of the preconfiguration file (for trusty) -### Localization -# Preseeding only locale sets language, country and locale. -d-i debian-installer/locale string en_US - -# The values can also be preseeded individually for greater flexibility. -#d-i debian-installer/language string en -#d-i debian-installer/country string NL -#d-i debian-installer/locale string en_GB.UTF-8 -# Optionally specify additional locales to be generated. -#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8 - -# Keyboard selection. -# Disable automatic (interactive) keymap detection. -d-i console-setup/ask_detect boolean false -d-i keyboard-configuration/xkb-keymap select us -# To select a variant of the selected layout: -#d-i keyboard-configuration/xkb-keymap select us(dvorak) -# d-i keyboard-configuration/toggle select No toggling - -### Network configuration -# Disable network configuration entirely. This is useful for cdrom -# installations on non-networked devices where the network questions, -# warning and long timeouts are a nuisance. -#d-i netcfg/enable boolean false - -# netcfg will choose an interface that has link if possible. This makes it -# skip displaying a list if there is more than one interface. -d-i netcfg/choose_interface select auto - -# To pick a particular interface instead: -#d-i netcfg/choose_interface select eth1 - -# To set a different link detection timeout (default is 3 seconds). -# Values are interpreted as seconds. -#d-i netcfg/link_wait_timeout string 10 - -# If you have a slow dhcp server and the installer times out waiting for -# it, this might be useful. -#d-i netcfg/dhcp_timeout string 60 -#d-i netcfg/dhcpv6_timeout string 60 - -# If you prefer to configure the network manually, uncomment this line and -# the static network configuration below. -#d-i netcfg/disable_autoconfig boolean true - -# If you want the preconfiguration file to work on systems both with and -# without a dhcp server, uncomment these lines and the static network -# configuration below. -#d-i netcfg/dhcp_failed note -#d-i netcfg/dhcp_options select Configure network manually - -# Static network configuration. -# -# IPv4 example -#d-i netcfg/get_ipaddress string 192.168.1.42 -#d-i netcfg/get_netmask string 255.255.255.0 -#d-i netcfg/get_gateway string 192.168.1.1 -#d-i netcfg/get_nameservers string 192.168.1.1 -#d-i netcfg/confirm_static boolean true -# -# IPv6 example -#d-i netcfg/get_ipaddress string fc00::2 -#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff:: -#d-i netcfg/get_gateway string fc00::1 -#d-i netcfg/get_nameservers string fc00::1 -#d-i netcfg/confirm_static boolean true - -# Any hostname and domain names assigned from dhcp take precedence over -# values set here. However, setting the values still prevents the questions -# from being shown, even if values come from dhcp. -d-i netcfg/get_hostname string unassigned-hostname -d-i netcfg/get_domain string unassigned-domain - -# If you want to force a hostname, regardless of what either the DHCP -# server returns or what the reverse DNS entry for the IP is, uncomment -# and adjust the following line. -#d-i netcfg/hostname string somehost - -# Disable that annoying WEP key dialog. -d-i netcfg/wireless_wep string -# The wacky dhcp hostname that some ISPs use as a password of sorts. -#d-i netcfg/dhcp_hostname string radish - -# If non-free firmware is needed for the network or other hardware, you can -# configure the installer to always try to load it, without prompting. Or -# change to false to disable asking. -#d-i hw-detect/load_firmware boolean true - -### Network console -# Use the following settings if you wish to make use of the network-console -# component for remote installation over SSH. This only makes sense if you -# intend to perform the remainder of the installation manually. -#d-i anna/choose_modules string network-console -#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key -#d-i network-console/password password r00tme -#d-i network-console/password-again password r00tme -# Use this instead if you prefer to use key-based authentication -#d-i network-console/authorized_keys_url http://host/authorized_keys - -### Mirror settings -# If you select ftp, the mirror/country string does not need to be set. -#d-i mirror/protocol string ftp -#d-i mirror/country string manual -#d-i mirror/http/hostname string archive.ubuntu.com -#d-i mirror/http/directory string /ubuntu -#d-i mirror/http/proxy string - -# Alternatively: by default, the installer uses CC.archive.ubuntu.com where -# CC is the ISO-3166-2 code for the selected country. You can preseed this -# so that it does so without asking. -#d-i mirror/http/mirror select CC.archive.ubuntu.com - -# Suite to install. -#d-i mirror/suite string trusty -# Suite to use for loading installer components (optional). -#d-i mirror/udeb/suite string trusty -# Components to use for loading installer components (optional). -#d-i mirror/udeb/components multiselect main, restricted - -### Account setup -# Skip creation of a root account (normal user account will be able to -# use sudo). The default is false; preseed this to true if you want to set -# a root password. -d-i passwd/root-login boolean true -# Alternatively, to skip creation of a normal user account. -d-i passwd/make-user boolean false - -# Root password, either in clear text -d-i passwd/root-password password csit -d-i passwd/root-password-again password csit -# or encrypted using a crypt(3) hash. -#d-i passwd/root-password-crypted password [crypt(3) hash] - -# To create a normal user account. -#d-i passwd/user-fullname string Ubuntu User -#d-i passwd/username string ubuntu -# Normal user's password, either in clear text -#d-i passwd/user-password password insecure -#d-i passwd/user-password-again password insecure -# or encrypted using a crypt(3) hash. -#d-i passwd/user-password-crypted password [crypt(3) hash] -# Create the first user with the specified UID instead of the default. -#d-i passwd/user-uid string 1010 -# The installer will warn about weak passwords. If you are sure you know -# what you're doing and want to override it, uncomment this. -#d-i user-setup/allow-password-weak boolean true -#d-i passwd/user-fullname string Packer - Temp User -#d-i passwd/username string packer -#d-i passwd/user-password password packer -#d-i passwd/user-password-again password packer -d-i user-setup/allow-password-weak boolean true - -# The user account will be added to some standard initial groups. To -# override that, use this. -#d-i passwd/user-default-groups string audio cdrom video - -# Set to true if you want to encrypt the first user's home directory. -d-i user-setup/encrypt-home boolean false - -### Clock and time zone setup -# Controls whether or not the hardware clock is set to UTC. -d-i clock-setup/utc boolean true - -# You may set this to any valid setting for $TZ; see the contents of -# /usr/share/zoneinfo/ for valid values. -d-i time/zone string US/Eastern - -# Controls whether to use NTP to set the clock during the install -d-i clock-setup/ntp boolean false -# NTP server to use. The default is almost always fine here. -#d-i clock-setup/ntp-server string ntp.example.com - -### Partitioning -## Partitioning example -# If the system has free space you can choose to only partition that space. -# This is only honoured if partman-auto/method (below) is not set. -# Alternatives: custom, some_device, some_device_crypto, some_device_lvm. -#d-i partman-auto/init_automatically_partition select biggest_free - -# Alternatively, you may specify a disk to partition. If the system has only -# one disk the installer will default to using that, but otherwise the device -# name must be given in traditional, non-devfs format (so e.g. /dev/sda -# and not e.g. /dev/discs/disc0/disc). -# For example, to use the first SCSI/SATA hard disk: -#d-i partman-auto/disk string /dev/sda -# In addition, you'll need to specify the method to use. -# The presently available methods are: -# - regular: use the usual partition types for your architecture -# - lvm: use LVM to partition the disk -# - crypto: use LVM within an encrypted partition -#d-i partman-auto/method string lvm -d-i partman-auto/method string regular - -# If one of the disks that are going to be automatically partitioned -# contains an old LVM configuration, the user will normally receive a -# warning. This can be preseeded away... -#d-i partman-lvm/device_remove_lvm boolean true -# The same applies to pre-existing software RAID array: -#d-i partman-md/device_remove_md boolean true -# And the same goes for the confirmation to write the lvm partitions. -#d-i partman-lvm/confirm boolean true -#d-i partman-lvm/confirm_nooverwrite boolean true - -# For LVM partitioning, you can select how much of the volume group to use -# for logical volumes. -#d-i partman-auto-lvm/guided_size string max -#d-i partman-auto-lvm/guided_size string 10GB -#d-i partman-auto-lvm/guided_size string 50% - -# You can choose one of the three predefined partitioning recipes: -# - atomic: all files in one partition -# - home: separate /home partition -# - multi: separate /home, /var, and /tmp partitions -#d-i partman-auto/choose_recipe select atomic - -# Or provide a recipe of your own... -# If you have a way to get a recipe file into the d-i environment, you can -# just point at it. -#d-i partman-auto/expert_recipe_file string /hd-media/recipe - -d-i partman-basicfilesystems/no_swap boolean false -d-i partman-auto/expert_recipe string myroot :: 1000 50 -1 ext4 \ - $primary{ } $bootable{ } method{ format } \ - format{ } use_filesystem{ } filesystem{ ext4 } \ - mountpoint{ / } \ - . -d-i partman-auto/choose_recipe select myroot - -# If not, you can put an entire recipe into the preconfiguration file in one -# (logical) line. This example creates a small /boot partition, suitable -# swap, and uses the rest of the space for the root partition: -#d-i partman-auto/expert_recipe string \ -# boot-root :: \ -# 40 50 100 ext3 \ -# $primary{ } $bootable{ } \ -# method{ format } format{ } \ -# use_filesystem{ } filesystem{ ext3 } \ -# mountpoint{ /boot } \ -# . \ -# 500 10000 1000000000 ext3 \ -# method{ format } format{ } \ -# use_filesystem{ } filesystem{ ext3 } \ -# mountpoint{ / } \ -# . \ -# 64 512 300% linux-swap \ -# method{ swap } format{ } \ -# . - -# If you just want to change the default filesystem from ext3 to something -# else, you can do that without providing a full recipe. -#d-i partman/default_filesystem string ext4 - -# The full recipe format is documented in the file partman-auto-recipe.txt -# included in the 'debian-installer' package or available from D-I source -# repository. This also documents how to specify settings such as file -# system labels, volume group names and which physical devices to include -# in a volume group. - -# This makes partman automatically partition without confirmation, provided -# that you told it what to do using one of the methods above. -d-i partman-partitioning/confirm_write_new_label boolean true -d-i partman/choose_partition select finish -d-i partman/confirm boolean true -d-i partman/confirm_nooverwrite boolean true - -## Partitioning using RAID -# The method should be set to "raid". -#d-i partman-auto/method string raid -# Specify the disks to be partitioned. They will all get the same layout, -# so this will only work if the disks are the same size. -#d-i partman-auto/disk string /dev/sda /dev/sdb - -# Next you need to specify the physical partitions that will be used. -#d-i partman-auto/expert_recipe string \ -# multiraid :: \ -# 1000 5000 4000 raid \ -# $primary{ } method{ raid } \ -# . \ -# 64 512 300% raid \ -# method{ raid } \ -# . \ -# 500 10000 1000000000 raid \ -# method{ raid } \ -# . - -# Last you need to specify how the previously defined partitions will be -# used in the RAID setup. Remember to use the correct partition numbers -# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported; -# devices are separated using "#". -# Parameters are: -# \ -# - -#d-i partman-auto-raid/recipe string \ -# 1 2 0 ext3 / \ -# /dev/sda1#/dev/sdb1 \ -# . \ -# 1 2 0 swap - \ -# /dev/sda5#/dev/sdb5 \ -# . \ -# 0 2 0 ext3 /home \ -# /dev/sda6#/dev/sdb6 \ -# . - -# For additional information see the file partman-auto-raid-recipe.txt -# included in the 'debian-installer' package or available from D-I source -# repository. - -# This makes partman automatically partition without confirmation. -d-i partman-md/confirm boolean true -d-i partman-partitioning/confirm_write_new_label boolean true -d-i partman/choose_partition select finish -d-i partman/confirm boolean true -d-i partman/confirm_nooverwrite boolean true - -## Controlling how partitions are mounted -# The default is to mount by UUID, but you can also choose "traditional" to -# use traditional device names, or "label" to try filesystem labels before -# falling back to UUIDs. -#d-i partman/mount_style select uuid -d-i partman/mount_style select traditional - -### Base system installation -# Configure a path to the preconfigured base filesystem. This can be used to -# specify a path for the installer to retrieve the filesystem image that will -# be deployed to disk and used as a base system for the installation. -#d-i live-installer/net-image string /install/filesystem.squashfs - -# Configure APT to not install recommended packages by default. Use of this -# option can result in an incomplete system and should only be used by very -# experienced users. -#d-i base-installer/install-recommends boolean false - -# The kernel image (meta) package to be installed; "none" can be used if no -# kernel is to be installed. -#d-i base-installer/kernel/image string linux-generic - -### Apt setup -# You can choose to install restricted and universe software, or to install -# software from the backports repository. -#d-i apt-setup/restricted boolean true -#d-i apt-setup/universe boolean true -#d-i apt-setup/backports boolean true -# Uncomment this if you don't want to use a network mirror. -d-i apt-setup/use_mirror boolean false -d-i apt-setup/services-select-ubuntu multiselect "" - -# Select which update services to use; define the mirrors to be used. -# Values shown below are the normal defaults. -#d-i apt-setup/services-select multiselect security -#d-i apt-setup/security_host string security.ubuntu.com -#d-i apt-setup/security_path string /ubuntu - -# Additional repositories, local[0-9] available -#d-i apt-setup/local0/repository string \ -# http://local.server/ubuntu trusty main -#d-i apt-setup/local0/comment string local server -# Enable deb-src lines -#d-i apt-setup/local0/source boolean true -# URL to the public key of the local repository; you must provide a key or -# apt will complain about the unauthenticated repository and so the -# sources.list line will be left commented out -#d-i apt-setup/local0/key string http://local.server/key - -# By default the installer requires that repositories be authenticated -# using a known gpg key. This setting can be used to disable that -# authentication. Warning: Insecure, not recommended. -#d-i debian-installer/allow_unauthenticated boolean true - -# Uncomment this to add multiarch configuration for i386 -#d-i apt-setup/multiarch string i386 - - -### Package selection -#tasksel tasksel/first multiselect ubuntu-desktop -#tasksel tasksel/first multiselect lamp-server, print-server -#tasksel tasksel/first multiselect kubuntu-desktop -tasksel tasksel/first multiselect server -tasksel tasksel/first multiselect ssh-server - -# Individual additional packages to install -#d-i pkgsel/include string openssh-server build-essential -d-i pkgsel/include string openssh-server -# Whether to upgrade packages after debootstrap. -# Allowed values: none, safe-upgrade, full-upgrade -d-i pkgsel/upgrade select none - -# Language pack selection -#d-i pkgsel/language-packs multiselect de, en, zh - -# Policy for applying updates. May be "none" (no automatic updates), -# "unattended-upgrades" (install security updates automatically), or -# "landscape" (manage system with Landscape). -d-i pkgsel/update-policy select none - -# Some versions of the installer can report back on what software you have -# installed, and what software you use. The default is not to report back, -# but sending reports helps the project determine what software is most -# popular and include it on CDs. -#popularity-contest popularity-contest/participate boolean false - -# By default, the system's locate database will be updated after the -# installer has finished installing most packages. This may take a while, so -# if you don't want it, you can set this to "false" to turn it off. -d-i pkgsel/updatedb boolean false - -### Boot loader installation -# Grub is the default boot loader (for x86). If you want lilo installed -# instead, uncomment this: -#d-i grub-installer/skip boolean true -# To also skip installing lilo, and install no bootloader, uncomment this -# too: -#d-i lilo-installer/skip boolean true - - -# This is fairly safe to set, it makes grub install automatically to the MBR -# if no other operating system is detected on the machine. -d-i grub-installer/only_debian boolean true - -# This one makes grub-installer install to the MBR if it also finds some other -# OS, which is less safe as it might not be able to boot that other OS. -d-i grub-installer/with_other_os boolean true - -# Due notably to potential USB sticks, the location of the MBR can not be -# determined safely in general, so this needs to be specified: -#d-i grub-installer/bootdev string /dev/sda -# To install to the first device (assuming it is not a USB stick): -#d-i grub-installer/bootdev string default - -# Alternatively, if you want to install to a location other than the mbr, -# uncomment and edit these lines: -#d-i grub-installer/only_debian boolean false -#d-i grub-installer/with_other_os boolean false -#d-i grub-installer/bootdev string (hd0,1) -# To install grub to multiple disks: -#d-i grub-installer/bootdev string (hd0,1) (hd1,1) (hd2,1) - -# Optional password for grub, either in clear text -#d-i grub-installer/password password r00tme -#d-i grub-installer/password-again password r00tme -# or encrypted using an MD5 hash, see grub-md5-crypt(8). -#d-i grub-installer/password-crypted password [MD5 hash] - -# Use the following option to add additional boot parameters for the -# installed system (if supported by the bootloader installer). -# Note: options passed to the installer will be added automatically. -#d-i debian-installer/add-kernel-opts string nousb - -### Finishing up the installation -# During installations from serial console, the regular virtual consoles -# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next -# line to prevent this. -#d-i finish-install/keep-consoles boolean true - -# Avoid that last message about the install being complete. -d-i finish-install/reboot_in_progress note - -# This will prevent the installer from ejecting the CD during the reboot, -# which is useful in some situations. -#d-i cdrom-detect/eject boolean false - -# This is how to make the installer shutdown when finished, but not -# reboot into the installed system. -#d-i debian-installer/exit/halt boolean true -# This will power off the machine instead of just halting it. -#d-i debian-installer/exit/poweroff boolean true - -### Preseeding other packages -# Depending on what software you choose to install, or if things go wrong -# during the installation process, it's possible that other questions may -# be asked. You can preseed those too, of course. To get a list of every -# possible question that could be asked during an install, do an -# installation, and then run these commands: -# debconf-get-selections --installer > file -# debconf-get-selections >> file - - -#### Advanced options -### Running custom commands during the installation -# d-i preseeding is inherently not secure. Nothing in the installer checks -# for attempts at buffer overflows or other exploits of the values of a -# preconfiguration file like this one. Only use preconfiguration files from -# trusted locations! To drive that home, and because it's generally useful, -# here's a way to run any shell command you'd like inside the installer, -# automatically. - -# This first command is run as early as possible, just after -# preseeding is read. -#d-i preseed/early_command string anna-install some-udeb -# This command is run immediately before the partitioner starts. It may be -# useful to apply dynamic partitioner preseeding that depends on the state -# of the disks (which may not be visible when preseed/early_command runs). -#d-i partman/early_command \ -# string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" -# This command is run just before the install finishes, but when there is -# still a usable /target directory. You can chroot to /target and use it -# directly, or use the apt-install and in-target commands to easily install -# packages and run commands in the target system. -#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh - -d-i preseed/late_command string \ - in-target sed -i /etc/ssh/sshd_config -e 's/[# ]*PermitRootLogin.*/PermitRootLogin yes/' ;