X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=resources%2Ftools%2Ftestbed-setup%2Fansible%2Froles%2Fvpp_device%2Ffiles%2Fcsit-initialize-vfs.sh;fp=resources%2Ftools%2Ftestbed-setup%2Fansible%2Froles%2Fvpp_device%2Ffiles%2Fcsit-initialize-vfs.sh;h=0000000000000000000000000000000000000000;hp=365497865ec9f261efc1546b2ece8ba4bedfc211;hb=df5672b3d9c29b51397f4770eb992c9f3f3955ce;hpb=8018da98e0f362bc69fc9600fac222a86fd46b5e

diff --git a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs.sh b/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs.sh
deleted file mode 100644
index 365497865e..0000000000
--- a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs.sh
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# CSIT SRIOV VF initialization and isolation.
-
-set -euo pipefail
-
-SCRIPT_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
-source "${SCRIPT_DIR}/csit-initialize-vfs-data.sh"
-
-# Initilize whitelisted NICs with maximum number of VFs.
-pci_idx=0
-for pci_addr in ${PCI_WHITELIST[@]}; do
-    if ! [[ ${PCI_BLACKLIST[*]} =~ "${pci_addr}" ]]; then
-        pci_path="/sys/bus/pci/devices/${pci_addr}"
-        # SR-IOV initialization
-        case "${1:-start}" in
-            "start" )
-                sriov_totalvfs=$(< "${pci_path}"/sriov_totalvfs)
-                ;;
-            "stop" )
-                sriov_totalvfs=0
-                ;;
-        esac
-        echo ${sriov_totalvfs} > "${pci_path}"/sriov_numvfs
-        # SR-IOV 802.1Q isolation
-        case "${1:-start}" in
-            "start" )
-                pf=$(basename "${pci_path}"/net/*)
-                for vf in $(seq "${sriov_totalvfs}"); do
-                    # PCI address index in array (pairing siblings).
-                    if [[ -n ${PF_INDICES[@]} ]]
-                    then
-                        vlan_pf_idx=${PF_INDICES[$pci_addr]}
-                    else
-                        vlan_pf_idx=$(( pci_idx % (${#PCI_WHITELIST[@]} / 2) ))
-                    fi
-                    # 802.1Q base offset.
-                    vlan_bs_off=1100
-                    # 802.1Q PF PCI address offset.
-                    vlan_pf_off=$(( vlan_pf_idx * 100 + vlan_bs_off ))
-                    # 802.1Q VF PCI address offset.
-                    vlan_vf_off=$(( vlan_pf_off + vf - 1 ))
-                    # VLAN string.
-                    vlan_str="vlan ${vlan_vf_off}"
-                    # MAC string.
-                    mac5="$(printf '%x' ${pci_idx})"
-                    mac6="$(printf '%x' $(( vf - 1 )))"
-                    mac_str="mac ba:dc:0f:fe:${mac5}:${mac6}"
-                    # Set 802.1Q VLAN id and MAC address
-                    ip link set ${pf} vf $(( vf - 1 )) ${mac_str} ${vlan_str}
-                    ip link set ${pf} vf $(( vf - 1 )) trust on
-                    ip link set ${pf} vf $(( vf - 1 )) spoof off
-                done
-                pci_idx=$(( pci_idx + 1 ))
-                ;;
-        esac
-        rmmod i40evf
-        modprobe i40evf
-    fi
-done