X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Ffunc%2Fhoneycomb%2Fmgmt-cfg-routing-apihc-apivat-func.robot;fp=tests%2Ffunc%2Fhoneycomb%2Fmgmt-cfg-routing-apihc-apivat-func.robot;h=0000000000000000000000000000000000000000;hp=acf203b796cf7717624d6694240360d1aa0f2a51;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hpb=859157b5db45927c7b4bb0b2d575e68805777a86 diff --git a/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot deleted file mode 100644 index acf203b796..0000000000 --- a/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot +++ /dev/null @@ -1,231 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.honeycomb.Routing.RoutingKeywords -| Library | resources.libraries.python.Trace.Trace -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/ipv4.robot -| Resource | resources/libraries/robot/ipv6.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/routing.robot -| ... -| Test Setup | Clear Packet Trace on All DUTs | ${nodes} -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Test Teardown | Honeycomb routing test teardown | ${node} | ${table} -| ... -| Documentation | *Honeycomb routing test suite.* -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Single hop IPv4 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure route with TG-if2 as next-hop. -| | ... | [Ver] Send ICMP packet from first TG interface to configured route -| | ... | destination. Receive packet on the second TG interface. -| | ... -| | ${table}= | Set Variable | table1 -| | Given Setup interfaces and neighbors for IPv4 routing test -| | When Honeycomb configures routing table -| | ... | ${node} | table1 | ipv4 | ${table1} | ${1} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table1 | ipv4 | ${table1_oper} -| | And Verify route IPv4 | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} - -| TC02: Multi hop IPv4 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure two routes through the second DUT interface. -| | ... | [Ver] Send 100 ICMP packets from first TG interface to configured -| | ... | route destination. Receive all packets on the second TG interface and\ -| | ... | verify that each destination MAC was used by exactly 50 packets. -| | ... | Receive packet on the second TG interface. -| | ... -| | ${table}= | Set Variable | table2 -| | Given Setup interfaces and neighbors for IPv4 routing test -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop1} | ${next_hop_mac1} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop2} | ${next_hop_mac2} -| | When Honeycomb configures routing table -| | ... | ${node} | table2 | ipv4 | ${table2} | ${1} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table2 | ipv4 | ${table2_oper} -| | And Verify multipath Route | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${dut_to_tg_if2_mac} | ${next_hop_mac1} | ${next_hop_mac2} - -| TC03: Special hop - blackhole IPv4 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure route with special rule blackhole. -| | ... | [Ver] Send ICMP packet from first TG interface to configured route -| | ... | destination. Make sure no packet is received on the second TG\ -| | ... | interface. -| | ... -| | ${table}= | Set Variable | table3 -| | Given Setup interfaces and neighbors for IPv4 routing test -| | When Honeycomb configures routing table -| | ... | ${node} | table3 | ipv4 | ${table3} | ${1} | special=${TRUE} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table3 | ipv4 | ${table3_oper} -| | And Run keyword and Expect Error | ICMP echo Rx timeout -| | ... | Verify route IPv4 | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} - -| TC04: Single hop IPv6 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure route with TG-if2 as next-hop. -| | ... | [Ver] Send ICMP packet from first TG interface to configured route -| | ... | destination. Receive packet on the second TG interface. -| | ... -| | ${table}= | Set Variable | table4 -| | Given Setup interfaces and neighbors for IPv6 routing test -| | When Honeycomb configures routing table -| | ... | ${node} | table4 | ipv6 | ${table4} | ${1} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table4 | ipv6 | ${table4_oper} -| | And Verify route IPv6 | ${nodes['TG']} -| | ... | ${src_ip} | ${next_hop} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} - -| TC05: Multi hop IPv6 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure two routes through the second DUT interface. -| | ... | [Ver] Send 100 ICMP packets from first TG interface to configured -| | ... | route destination. Receive all packets on the second TG interface and\ -| | ... | verify that each destination MAC was used by exactly 50 packets. -| | ... | Receive packet on the second TG interface. -| | ... -| | ${table}= | Set Variable | table5 -| | Given Setup interfaces and neighbors for IPv6 routing test -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop1} | ${next_hop_mac1} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop2} | ${next_hop_mac2} -| | When Honeycomb configures routing table -| | ... | ${node} | table5 | ipv6 | ${table5} | ${1} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table5 | ipv6 | ${table5_oper} -| | And Verify multipath Route | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${dut_to_tg_if2_mac} | ${next_hop_mac1} | ${next_hop_mac2} - -| TC06: Special hop - blackhole IPv6 route -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\ -| | ... | interfaces and configure route with special rule blackhole. -| | ... | [Ver] Send ICMP packet from first TG interface to configured route -| | ... | destination. Make sure no packet is received on the second TG\ -| | ... | interface. -| | ... -| | ${table}= | Set Variable | table6 -| | Given Setup interfaces and neighbors for IPv6 routing test -| | When Honeycomb configures routing table -| | ... | ${node} | table6 | ipv6 | ${table6} | ${1} | special=${TRUE} -| | Then Routing data from Honeycomb should contain -| | ... | ${node} | table6 | ipv6 | ${table6_oper} -| | And Run keyword and Expect Error | ICMP echo Rx timeout -| | ... | Verify route IPv6 | ${nodes['TG']} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} - -*** Keywords *** -| Setup interfaces and neighbors for IPv4 routing test -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/routing.py -| | ... | ${nodes['DUT1']} | ipv4 | ${dut_to_tg_if2} -| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if1} | ${1} -| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if2} | ${1} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_len} -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_len} -| | Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip} | ${tg_to_dut_if1_mac} -| | Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop} | ${tg_to_dut_if2_mac} - -| Setup interfaces and neighbors for IPv6 routing test -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/routing.py -| | ... | ${nodes['DUT1']} | ipv6 | ${dut_to_tg_if2} -| | Honeycomb sets interface VRF ID -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1} | ipv6 -| | Honeycomb sets interface VRF ID -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${1} | ipv6 -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_len} -| | Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_len} -| | Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip} | ${tg_to_dut_if1_mac} -| | Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${next_hop} | ${tg_to_dut_if2_mac} -| | Vpp all ra suppress link layer | ${nodes} - -| Honeycomb routing test teardown -| | ... -| | [arguments] | ${node} | ${routing_table} -| | ... -| | Show Packet Trace on All DUTs | ${nodes} -| | Log routing configuration from VAT | ${node} -| | Honeycomb removes routing configuration | ${node} | ${routing_table} - -| Setup vrf IDs -| | ... -| | [Arguments] | ${node} | ${interface} | ${vrf} -| | ... -| | Honeycomb sets interface VRF ID -| | ... | ${node} | ${interface} | ${vrf} | ipv4 -| | Honeycomb sets interface VRF ID -| | ... | ${node} | ${interface} | ${vrf} | ipv6 \ No newline at end of file