X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Ffunc%2Frpf%2Feth2p-ethip4-ip4base-rpf-func.robot;fp=tests%2Ffunc%2Frpf%2Feth2p-ethip4-ip4base-rpf-func.robot;h=0000000000000000000000000000000000000000;hp=5a704e83a0256300ef8cd1744f8fa2b0880a9c6a;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hpb=859157b5db45927c7b4bb0b2d575e68805777a86 diff --git a/tests/func/rpf/eth2p-ethip4-ip4base-rpf-func.robot b/tests/func/rpf/eth2p-ethip4-ip4base-rpf-func.robot deleted file mode 100644 index 5a704e83a0..0000000000 --- a/tests/func/rpf/eth2p-ethip4-ip4base-rpf-func.robot +++ /dev/null @@ -1,134 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/counters.robot -| Resource | resources/libraries/robot/interfaces.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/ipv4.robot -| Resource | resources/libraries/robot/l2_xconnect.robot -| Resource | resources/libraries/robot/traffic.robot -| Library | resources.libraries.python.Trace -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *Source RPF check on IPv4 test cases* -| ... -| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG -| ... | with one link between the nodes. -| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect. -| ... | DUT1 is configured with IP source check on link to TG, -| ... | *[Ver] TG verification:* Test ICMP Echo Request packets are sent -| ... | in one direction by TG on link to DUT1 and received on TG link -| ... | to DUT2. On receive TG verifies if packets which source address -| ... | is not in routes are dropped. - -*** Variables *** -| ${dut1_to_tg_ip}= | 192.168.1.1 -| ${dut1_to_tg_ip_GW}= | 192.168.1.2 -| ${dut1_to_dut2_ip}= | 192.168.2.1 -| ${dut1_to_dut2_ip_GW}= | 192.168.2.2 -| ${test_dst_ip}= | 32.0.0.1 -| ${pass_test_src_ip}= | 16.0.0.1 -| ${drop_test_src_ip}= | 24.0.0.1 -| ${prefix_length}= | 24 - -*** Test Cases *** -| TC01: VPP source RPF check on IPv4 src-addr -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG -| | ... | [Cfg] On DUT1 setup IP source check. -| | ... | [Ver] Make TG verify matching packets which source address -| | ... | is not in routes are dropped. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | And Add Arp On Dut -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} -| | ... | ${tg_to_dut2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} | resolve_attempts=${NONE} -| | And Add Arp On Dut -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW} -| | ... | ${tg_to_dut1_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length} -| | ... | ${dut1_to_tg_ip_GW} | ${dut1_to_tg} | resolve_attempts=${NONE} -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg} -| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${dut1_to_tg_ip_GW} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Packet transmission from port to port should fail | ${tg_node} -| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} - -| TC02: VPP pass traffic on non-enabled RPF interface -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG -| | ... | [Cfg] On DUT1 setup IP source check. -| | ... | [Ver] Make TG verify matching packets on non-enabled RPF interface -| | ... | are passed. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | And Add Arp On Dut -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} -| | ... | ${tg_to_dut2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} | resolve_attempts=${NONE} -| | And Add Arp On Dut -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW} -| | ... | ${tg_to_dut1_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length} -| | ... | ${dut1_to_tg_ip_GW} | ${dut1_to_tg} | resolve_attempts=${NONE} -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg} -| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${test_dst_ip} | ${pass_test_src_ip} | ${tg_to_dut2} -| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${test_dst_ip} | ${dut1_to_tg_ip_GW} | ${tg_to_dut2} -| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}