X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Ffunc%2Fvlan%2Feth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot;fp=tests%2Ffunc%2Fvlan%2Fvlan_tag_translate_l2_bridge_domain_ipv6.robot;h=3867baa5b44b8dc0ac1883ea0a3c1508a681d1c2;hp=6e3c76c3b0440019e95b82855012778cd04f4f7f;hb=982e81efab69bc007455481b6425fcebc7213906;hpb=c232d04e7a5bffb72063240ee7e15967f46c4873

diff --git a/tests/func/vlan/vlan_tag_translate_l2_bridge_domain_ipv6.robot b/tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot
similarity index 53%
rename from tests/func/vlan/vlan_tag_translate_l2_bridge_domain_ipv6.robot
rename to tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot
index 6e3c76c3b0..3867baa5b4 100644
--- a/tests/func/vlan/vlan_tag_translate_l2_bridge_domain_ipv6.robot
+++ b/tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot
@@ -21,23 +21,23 @@
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV
 | Test Setup | Func Test Setup
 | Test Teardown | Func Test Teardown
-| Documentation | *L2 bridge domain with VLAN tag rewrite test cases - IPv6*
+| Documentation | *L2BD with VLAN tag rewrite test cases - translate-1-2*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
 | ... | with single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv6-ICMPv6 or
-| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv6-ICMPv6
-| ... | on TG-DUT2 for L2 switching of IPv6.
+| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or
+| ... | Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, Eth-dot1ad-IPv4-ICMPv4 or
+| ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6
+| ... | on TG-DUT2 for L2 switching of IPv4/IPv6.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD)
 | ... | switching combined with MAC learning enabled and added VLAN
-| ... | sub-interface with VLAN tag rewrite translate-1-1 method
-| ... | of interface towards TG and interface towards DUT2. DUT2 is configured
-| ... | with L2 bridge domain (L2BD) switching between VLAN sub-interface
-| ... | with VLAN tag rewrite pop-1 method of interface towards DUT1 and
-| ... | interface towards TG.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are
+| ... | sub-interface with VLAN tag rewrite translate-1-2 method of interface
+| ... | towards TG and interface towards DUT2. DUT2 is configured with L2
+| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag
+| ... | rewrite pop-2 method of interface towards DUT1 and interface towards TG.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
 | ... | sent from TG on link to DUT1 and received in TG on link form DUT2;
-| ... | on receive TG verifies packets for correctness and their IPv6 src-addr,
+| ... | on receive TG verifies packets for correctness and their IPv4 src-addr,
 | ... | dst-addr and MAC addresses.
 | ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad.
 
@@ -54,94 +54,19 @@
 | ${inner_vlan_id2}= | 220
 | ${inner_vlan_wrong}= | 250
 
-| ${src_ip}= | 3ffe:63::1
-| ${dst_ip}= | 3ffe:63::2
+| ${src_ip6}= | 3ffe:63::1
+| ${dst_ip6}= | 3ffe:63::2
 
 *** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD and VLAN translate-1-1 (DUT1) switch ICMPv6 between two TG links
+| TC01: DUT1 and DUT2 with L2BD and VLAN translate-1-2 (DUT1) switch ICMPv4 between two TG links
 | | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one VLAN
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method;
-| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG
-| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagged with one Dot1q tag
-| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify
-| | ... | that packet is received. [Ref] IEEE 802.1q
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
-| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2}
-| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ...                                     | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ...                                     | ${bd_id1}
-| | Then Send and receive ICMP Packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip}
-| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1}
-
-| TC02: DUT1 and DUT2 with L2BD and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one VLAN
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method
-| | ... | to set tag different from tag set on VLAN sub-interface of DUT2;
-| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG
-| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagged with one Dot1q tag
-| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify
-| | ... | that packet is not received. [Ref] IEEE 802.1q
-| | [Tags] | SKIP_PATCH
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
-| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong}
-| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ...                                     | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ...                                     | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
-| | ... | vlan1=${outer_vlan_id1}
-
-| TC03: DUT1 and DUT2 with L2BD and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \
+| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
 | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
 | | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite
 | | ... | translate-1-2 method; on DUT2 configure L2 bridge domain (L2BD) with
 | | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req
+| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req
 | | ... | tagged with one Dot1q tag from one of its interfaces to another one
 | | ... | via DUT1 and DUT2; verify that packet is received.
 | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
@@ -152,11 +77,11 @@
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
 | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
+| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
 | | ... | type_subif=two_tags dot1ad
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
 | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2}
+| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id1}
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
 | | ... | ${vlan2_index} | pop-2
 | | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
@@ -170,19 +95,19 @@
 | | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index}
 | | ...                                     | ${bd_id1}
 | | Then Send and receive ICMP Packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip}
-| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1}
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q
+| | ... | vlan1=${outer_vlan_id1}
 
-| TC04: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links
+| TC02: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links
 | | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \
+| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
 | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
 | | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite
 | | ... | translate-1-2 method to set inner tag different from inner tag set on
 | | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with
 | | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req
+| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req
 | | ... | tagged with one Dot1q tag from one of its interfaces to another one
 | | ... | via DUT1 and DUT2; verify that packet is not received.
 | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
@@ -194,7 +119,7 @@
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
 | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
+| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
 | | ... | type_subif=two_tags dot1ad
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
 | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
@@ -213,19 +138,18 @@
 | | ...                                     | ${bd_id1}
 | | Then Run Keyword And Expect Error | ICMP echo Rx timeout
 | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
-| | ... | vlan1=${outer_vlan_id1}
+| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1}
 
-| TC05: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links
+| TC03: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links
 | | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \
+| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
 | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
 | | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite
 | | ... | translate-1-2 method to set outer tag different from outer tag set on
 | | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with
 | | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req
+| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req
 | | ... | tagged with one Dot1q tag from one of its interfaces to another one
 | | ... | via DUT1 and DUT2; verify that packet is not received.
 | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
@@ -237,11 +161,11 @@
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
 | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
+| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
 | | ... | type_subif=two_tags dot1ad
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
 | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
-| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2}
+| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id1}
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
 | | ... | ${vlan2_index} | pop-2
 | | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
@@ -256,20 +180,19 @@
 | | ...                                     | ${bd_id1}
 | | Then Run Keyword And Expect Error | ICMP echo Rx timeout
 | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
-| | ... | vlan1=${outer_vlan_id1}
+| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1}
 
-| TC06: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv6 between two TG links
+| TC04: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv4 between two TG links
 | | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \
+| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
 | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
 | | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite
 | | ... | translate-1-2 method to set outer and inner tags different from tags
 | | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2
 | | ... | bridge domain with one interface to TG and one Dot1ad sub-interface
 | | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send
-| | ... | ICMPv6 Echo Req tagged with one Dot1q tag from one of its interfaces
+| | ... | ICMPv4 Echo Req tagged with one Dot1q tag from one of its interfaces
 | | ... | to another one via DUT1 and DUT2; verify that packet is not received.
 | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
 | | [Tags] | SKIP_PATCH
@@ -280,7 +203,7 @@
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
 | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
+| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1}
 | | ... | type_subif=two_tags dot1ad
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
 | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
@@ -299,115 +222,31 @@
 | | ...                                     | ${bd_id1}
 | | Then Run Keyword And Expect Error | ICMP echo Rx timeout
 | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q
-| | ... | vlan1=${outer_vlan_id1}
+| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1}
 
-| TC07: DUT1 and DUT2 with L2BD and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links
+| TC05: DUT1 and DUT2 with L2BD and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links
 | | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \
+| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
 | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method; on DUT2 configure L2 bridge domain (L2BD) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
+| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite
+| | ... | translate-1-2 method; on DUT2 configure L2 bridge domain (L2BD) with
+| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with
+| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req
+| | ... | tagged with one Dot1q tag from one of its interfaces to another one
 | | ... | via DUT1 and DUT2; verify that packet is received.
 | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
 | | Given Path for 3-node testing is set
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2}
-| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ...                                     | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ...                                     | ${bd_id1}
-| | Then Send and receive ICMP Packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip}
-| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
-
-| TC08: DUT1 and DUT2 with L2BD and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \
-| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
-| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
-| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
-| | ... | translate-2-1 method to set tag different from tag set on VLAN
-| | ... | sub-interface of DUT2; on DUT2 configure L2 bridge domain (L2BD) with
-| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
-| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | via DUT1 and DUT2; verify that packet is not received.
-| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
-| | [Tags] | SKIP_PATCH
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
-| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
-| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong}
-| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
-| | ... | ${vlan2_index} | pop-1
-| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index}
-| | ...                                     | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index}
-| | ...                                     | ${bd_id1}
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
-
-| TC09: DUT1 and DUT2 with L2BD and VLAN translate-2-2 switch ICMPv6 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method;
-| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG and
-| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is received. [Ref] IEEE 802.1ad
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
+| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
 | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
 | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
 | | ... | type_subif=two_tags dot1ad
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
+| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
 | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2}
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
 | | ... | ${vlan2_index} | pop-2
@@ -422,36 +261,34 @@
 | | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index}
 | | ...                                     | ${bd_id1}
 | | Then Send and receive ICMP Packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip}
-| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
-| | ... | vlan2=${inner_vlan_id1}
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6}
+| | ... | dst_ip=${dst_ip6} | encaps=Dot1q | vlan1=${outer_vlan_id1}
 
-| TC10: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links
+| TC06: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links
 | | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another
-| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2;
-| | ... | verify that packet is not received. [Ref] IEEE 802.1ad
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \
+| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
+| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite
+| | ... | translate-1-2 method to set inner tag different from inner tag set on
+| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with
+| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with
+| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req
+| | ... | tagged with one Dot1q tag from one of its interfaces to another one
+| | ... | via DUT1 and DUT2; verify that packet is not received.
+| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
 | | [Tags] | SKIP_PATCH
 | | Given Path for 3-node testing is set
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
+| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
 | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
 | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
 | | ... | type_subif=two_tags dot1ad
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
+| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
 | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong}
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
 | | ... | ${vlan2_index} | pop-2
@@ -467,35 +304,34 @@
 | | ...                                     | ${bd_id1}
 | | Then Run Keyword And Expect Error | ICMP echo Rx timeout
 | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
+| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q
+| | ... | vlan1=${outer_vlan_id1}
 
-| TC11: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links
+| TC07: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links
 | | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of
-| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to
-| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite
-| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another
-| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2;
-| | ... | verify that packet is not received. [Ref] IEEE 802.1ad
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \
+| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
+| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite
+| | ... | translate-1-2 method to set outer tag different from outer tag set on
+| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with
+| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with
+| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req
+| | ... | tagged with one Dot1q tag from one of its interfaces to another one
+| | ... | via DUT1 and DUT2; verify that packet is not received.
+| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
 | | [Tags] | SKIP_PATCH
 | | Given Path for 3-node testing is set
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
+| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
 | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
 | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
 | | ... | type_subif=two_tags dot1ad
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
+| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
 | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2}
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
 | | ... | ${vlan2_index} | pop-2
@@ -511,35 +347,34 @@
 | | ...                                     | ${bd_id1}
 | | Then Run Keyword And Expect Error | ICMP echo Rx timeout
 | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
+| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q
+| | ... | vlan1=${outer_vlan_id1}
 
-| TC12: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links
+| TC08: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv6 between two TG links
 | | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \
-| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2
-| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad
-| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to
-| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2;
-| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG
-| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1
-| | ... | tagged with Dot1ad tags from one of its interfaces to another one
-| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify
-| | ... | that packet is not received. [Ref] IEEE 802.1ad
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \
+| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to
+| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite
+| | ... | translate-1-2 method to set outer and inner tags different from tags
+| | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2
+| | ... | bridge domain with one interface to TG and one Dot1ad sub-interface
+| | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send
+| | ... | ICMPv6 Echo Req tagged with one Dot1q tag from one of its interfaces
+| | ... | to another one via DUT1 and DUT2; verify that packet is not received.
+| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
 | | [Tags] | SKIP_PATCH
 | | Given Path for 3-node testing is set
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Interfaces in 3-node path are up
-| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
-| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
-| | ... | type_subif=two_tags dot1ad
+| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1}
 | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created
 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid}
 | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2}
 | | ... | type_subif=two_tags dot1ad
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node}
-| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False}
+| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False}
 | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong}
 | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node}
 | | ... | ${vlan2_index} | pop-2
@@ -555,5 +390,5 @@
 | | ...                                     | ${bd_id1}
 | | Then Run Keyword And Expect Error | ICMP echo Rx timeout
 | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad
-| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
+| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q
+| | ... | vlan1=${outer_vlan_id1}