X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Ffunc%2Fvxlan%2Feth2p-ethip4vxlan-l2bdbasemaclrn-func.robot;fp=tests%2Ffunc%2Fvxlan%2Feth2p-ethip4vxlan-l2bdbasemaclrn-func.robot;h=0000000000000000000000000000000000000000;hp=6db2ee27ff95e01d035f4c74d1fce8ff64475e85;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hpb=859157b5db45927c7b4bb0b2d575e68805777a86

diff --git a/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot b/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot
deleted file mode 100644
index 6db2ee27ff..0000000000
--- a/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot
+++ /dev/null
@@ -1,78 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/vxlan.robot
-| Resource | resources/libraries/robot/l2_traffic.robot
-| Resource | resources/libraries/robot/qemu.robot
-| Resource | resources/libraries/robot/double_qemu_setup.robot
-| Library  | resources.libraries.python.Trace
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *Bridge-domain with VXLAN test cases - IPv4*
-| ...
-| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
-| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) switching combined with MAC learning enabled;
-| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
-| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG
-| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
-
-*** Variables ***
-| ${vni_1}= | 23
-| ${vni_2}= | 35
-
-| ${bd_id1}= | 10
-| ${bd_id2}= | 20
-| ${bd_id3}= | 30
-| ${shg1}= | 1
-| ${shg2}= | 2
-
-| ${ip4_addr1}= | 172.16.0.1
-| ${ip4_addr2}= | 172.16.0.2
-| ${ip4_prefix}= | 24
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels switch ICMPv4 between TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG
-| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in
-| | ... | both directions and are correct on receive. [Ref] RFC7348.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2}
-| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1}
-| | And Configure IP addresses and neighbors on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE}
-| | ...                                    | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE}
-| | ${dut1s_vxlan}= | When Create VXLAN interface     | ${dut1_node} | ${vni_1}
-| |                 | ... | ${dut1s_ip_address} | ${dut2s_ip_address}
-| | And Add interfaces to L2BD | ${dut1_node} | ${bd_id1}
-| | ...                            | ${dut1_to_tg} | ${dut1s_vxlan}
-| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| |                 | ... | ${dut2s_ip_address} | ${dut1s_ip_address}
-| | And Add interfaces to L2BD | ${dut2_node} | ${bd_id1}
-| | ...                            | ${dut2_to_tg} | ${dut2s_vxlan}
-| | Then Send ICMPv4 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}