X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fperf%2F10ge2p1x520-ethip4-ip4base-eth-4vhost-2vm-ndrpdrdisc.robot;h=d2604cf00b63600e750e458247c72d82f9bd8f23;hp=3aa624cf21c32d524f27e90dcaa0375903967c2e;hb=086f3a5065d744e00fe10289eb2f090b7bde208e;hpb=1cb9b4af51c289045a729cc9cbfc5f34aa54e948

diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-eth-4vhost-2vm-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-eth-4vhost-2vm-ndrpdrdisc.robot
index 3aa624cf21..d2604cf00b 100644
--- a/tests/perf/10ge2p1x520-ethip4-ip4base-eth-4vhost-2vm-ndrpdrdisc.robot
+++ b/tests/perf/10ge2p1x520-ethip4-ip4base-eth-4vhost-2vm-ndrpdrdisc.robot
@@ -12,19 +12,19 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance.robot
+| Resource | resources/libraries/robot/performance_setup.robot
 | Library | resources.libraries.python.QemuUtils
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
 | ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | VHOST | VM
 | ...
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L3 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
+| Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd
+| ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
 | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
 | ...
@@ -56,12 +56,14 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
-#CPU settings
+# CPU settings
 | ${system_cpus}= | ${1}
 | ${vpp_cpus}= | ${5}
 | ${vm_cpus}= | ${5}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
 
 *** Test Cases ***
 | tc01-64B-1t1c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc
@@ -69,7 +71,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps.
-| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -80,22 +82,22 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find NDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc02-64B-1t1c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -106,23 +108,23 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find PDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
-| | ...   | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 | tc03-1518B-1t1c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps.
-| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -133,22 +135,22 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find NDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc04-1518B-1t1c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -159,16 +161,16 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find PDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
-| | ...   | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 | tc05-IMIX-1t1c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc
 | | [Documentation]
@@ -176,7 +178,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \
 | | ... | size using binary search start at 10GE linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -187,15 +189,15 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find NDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc06-IMIX-1t1c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc
 | | [Documentation]
@@ -203,7 +205,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \
 | | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -214,23 +216,23 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find PDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
-| | ...   | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 | tc07-64B-2t2c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps.
-| | [Tags] | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -241,22 +243,22 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find NDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc08-64B-2t2c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -267,23 +269,23 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find PDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
-| | ...   | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 | tc09-1518B-2t2c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps.
-| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -294,22 +296,22 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find NDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc10-1518B-2t2c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -320,16 +322,16 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find PDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
-| | ...   | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 | tc11-IMIX-2t2c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc
 | | [Documentation]
@@ -337,7 +339,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \
 | | ... | size using binary search start at 10GE linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -348,15 +350,15 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find NDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc12-IMIX-2t2c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc
 | | [Documentation]
@@ -364,7 +366,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \
 | | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -375,23 +377,23 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find PDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
-| | ...   | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 | tc13-64B-4t4c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps.
-| | [Tags] | 4T4C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -402,22 +404,22 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find NDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc14-64B-4t4c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -428,23 +430,23 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find PDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
-| | ...   | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 | tc15-1518B-4t4c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps.
-| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -455,22 +457,22 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find NDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc16-1518B-4t4c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames \
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -481,16 +483,16 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find PDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
-| | ...   | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 | tc17-IMIX-4t4c-ethip4-ip4base-eth-4vhost-2vm-ndrdisc
 | | [Documentation]
@@ -498,7 +500,7 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \
 | | ... | size using binary search start at 10GE linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -509,15 +511,15 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find NDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc18-IMIX-4t4c-ethip4-ip4base-eth-4vhost-2vm-pdrdisc
 | | [Documentation]
@@ -525,7 +527,7 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \
 | | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | ${10000}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
@@ -536,13 +538,13 @@
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Set Test Variable | ${dut1_vm_refs}
 | | Set Test Variable | ${dut2_vm_refs}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding with Vhost-User for '2' VMs initialized in a 3-node circular topology
-| | And   '2' Guest VMs with dpdk-testpmd-mac connected via vhost-user is setup in a 3-node circular topology
-| | Then  Find PDR using binary search and pps
-| | ...   | ${framesize} | ${binary_min} | ${binary_max} | 3-node-IPv4
-| | ...   | ${min_rate} | ${max_rate} | ${threshold}
-| | ...   | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
+| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
+| | Then Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}