X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fperf%2F10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot;h=e816298be5c4e77c38017b69724775d9cad44863;hp=85402844f63b41c5a3f65827bdcb15cec8b83969;hb=430afafb4cadf503ccee99c09f6de7402f5404c7;hpb=3ef4ce6c9cc006d728a8acea20bc18aadc88acdc

diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot
index 85402844f6..e816298be5 100644
--- a/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot
+++ b/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -14,16 +14,21 @@
 *** Settings ***
 | Resource | resources/libraries/robot/performance.robot
 | Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ...        | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L3 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ...           | AND          | Show vpp trace dump on all DUTs
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance ndrchk test
+| ...
 | Documentation | *Reference NDR throughput IPv4 whitelist verify test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -45,21 +50,25 @@
 | ... | TG node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
+*** Variables ***
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+
 *** Test Cases ***
-| TC01: Verify 64B ref-NDR at 2x 3.1Mpps - DUT IPv4 iAcl whitelist - 1thread 1core 1rxq
+| tc01-64B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 64 Byte frames using single trial throughput test.
-| | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 3.1mpps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ref-NDR for 64 Byte frames using single trial throughput test
+| | ... | at 2x 3.6mpps.
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ${framesize}= | Set Variable | ${64}
+| | ${rate}= | Set Variable | 3.6mpps
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -74,23 +83,23 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${traffic_profile}
 
-| TC02: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 iAcl whitelist - 1thread 1core 1rxq
+| tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 1518 Byte frames using single trial throughput test.
-| | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
+| | ... | ref-NDR for 1518 Byte frames using single trial throughput test
+| | ... | at 2x 812743pps.
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ${framesize}= | Set Variable | ${1518}
 | | ${rate}= | Set Variable | 812743pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -105,22 +114,22 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${traffic_profile}
 
-| TC03: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 iAcl whitelist - 1thread 1core 1rxq
+| tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 9000 Byte frames using single trial throughput test.
-| | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
+| | ... | ref-NDR for 9000 Byte frames using single trial throughput test
+| | ... | at 2x 138580pps.
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 138580pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -135,23 +144,23 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${traffic_profile}
 
-| TC04: Verify 64B ref-NDR at 2x 5.8Mpps - DUT IPv4 iAcl whitelist - 2thread 2core 1rxq
+| tc04-64B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 64 Byte frames using single trial throughput test.
-| | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 5.8mpps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ref-NDR for 64 Byte frames using single trial throughput test
+| | ... | at 2x 6.3mpps.
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ${framesize}= | Set Variable | ${64}
+| | ${rate}= | Set Variable | 6.3mpps
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -166,23 +175,23 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${traffic_profile}
 
-| TC05: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 iAcl whitelist - 2thread 2core 1rxq
+| tc05-1518B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 1518 Byte frames using single trial throughput test.
-| | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
+| | ... | ref-NDR for 1518 Byte frames using single trial throughput test
+| | ... | at 2x 812743pps.
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ${framesize}= | Set Variable | ${1518}
 | | ${rate}= | Set Variable | 812743pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -197,22 +206,22 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${traffic_profile}
 
-| TC06: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 iAcl whitelist - 2thread 2core 1rxq
+| tc06-9000B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 9000 Byte frames using single trial throughput test.
-| | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
+| | ... | ref-NDR for 9000 Byte frames using single trial throughput test
+| | ... | at 2x 138580pps.
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 138580pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -227,23 +236,23 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${traffic_profile}
 
-| TC07: Verify 64B ref-NDR at 2x 7.8Mpps - DUT IPv4 iAcl whitelist - 4threads 4cores 2rxq
+| tc07-64B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 64 Byte frames using single trial throughput test.
-| | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 7.8mpps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ref-NDR for 64 Byte frames using single trial throughput test
+| | ... | at 2x 9.7mpps.
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ${framesize}= | Set Variable | ${64}
+| | ${rate}= | Set Variable | 9.7mpps
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -258,23 +267,23 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${traffic_profile}
 
-| TC08: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 iAcl whitelist - 4threads 4cores 2rxq
+| tc08-1518B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 1518 Byte frames using single trial throughput test.
-| | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
+| | ... | ref-NDR for 1518 Byte frames using single trial throughput test
+| | ... | at 2x 812743pps.
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ${framesize}= | Set Variable | ${1518}
 | | ${rate}= | Set Variable | 812743pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -289,22 +298,22 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${traffic_profile}
 
-| TC09: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 iAcl whitelist - 4threads 4cores 2rxq
+| tc09-9000B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 9000 Byte frames using single trial throughput test.
-| | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
+| | ... | ref-NDR for 9000 Byte frames using single trial throughput test
+| | ... | at 2x 138580pps.
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 138580pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -319,5 +328,5 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${traffic_profile}