X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fperf%2F10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot;h=973edf8b224f7298a0b964d1edfcbba9928d2e7b;hp=97d618ce493e6a2640b338c2fdf5aeb4b5a2d183;hb=430afafb4cadf503ccee99c09f6de7402f5404c7;hpb=7436d8bdf60bca9b80fb76781e1f709bbcd435da

diff --git a/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot
index 97d618ce49..973edf8b22 100644
--- a/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot
+++ b/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot
@@ -19,12 +19,12 @@
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
 | ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP6UNRLAY | IP4OVRLAY
 | ...
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L3 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
+| Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance discovery test | ${min_rate}pps | ${framesize}
 | ... | ${traffic_profile}
 | ...
 | Documentation | *RFC6830: Pkt throughput Lisp test cases*
@@ -65,14 +65,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -95,14 +95,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -126,14 +126,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -156,14 +156,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -187,13 +187,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -216,13 +216,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -246,14 +246,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -276,14 +276,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -307,14 +307,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -337,14 +337,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -368,13 +368,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -397,13 +397,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -427,14 +427,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -457,14 +457,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -488,14 +488,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -518,14 +518,14 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -549,13 +549,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
@@ -578,13 +578,13 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}