X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fperf%2F10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot;fp=tests%2Fperf%2F10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot;h=f3bcac2bf50ad3650479071763557f4a53ea92cc;hp=0000000000000000000000000000000000000000;hb=043b2564cd0bfbcb3b00c782fb8d317e752ac210;hpb=49197759c5107700ce470202b3650e9eabde53c9

diff --git a/tests/perf/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot
new file mode 100644
index 0000000000..f3bcac2bf5
--- /dev/null
+++ b/tests/perf/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-snat-ndrpdrdisc.robot
@@ -0,0 +1,248 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance.robot
+| Resource | resources/libraries/robot/snat.robot
+| Resource | resources/libraries/robot/traffic.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | SNAT | BASE
+| ...
+| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | 3-node Performance Suite Teardown
+| ...
+| Test Setup | Performance test setup
+| ...
+| Documentation | *SNAT performance test cases*
+| ...
+| ... | *High level description*
+| ...
+| ... | - NDR and PDR tests
+| ... | - 3-node topology, TG-DUT1-DUT2-TG, SNAT is enabled between DUTs.
+| ... | - Cores / threads: 1t1c and 2t2c
+| ... | - Framesize: 64B, 1518B, IMIX
+| ... | - Packet: ETH / IP(src, dst) / UDP(src_port, dst_port) / payload
+| ... | - scale: src: 1 user, 10 users, 100 users, ..., 4000 up to the memory
+| ... |   limit; 15 ports per user
+| ...
+| ... | *Low level description*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
+| ... | tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, one flow per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with UDP header and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\
+| | ... | 1 user and 15 ports (sessions) per user.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps
+| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-15p
+| | ... | AND | Show SNAT verbose | ${dut1}
+| | ... | AND | Show SNAT verbose | ${dut2}
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | ...
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add SNAT to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When SNAT is initialized in a 3-node circular topology
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| tc02-64B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\
+| | ... | 1 user and 15 ports (sessions) per user.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize}
+| | ... | 3-node-IPv4-SNAT-1u-15p
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add SNAT to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When SNAT is initialized in a 3-node circular topology
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
+
+| tc03-1518B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\
+| | ... | 1 user and 15 ports (sessions) per user.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps
+| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-15p
+| | ... | AND | Show SNAT verbose | ${dut1}
+| | ... | AND | Show SNAT verbose | ${dut2}
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | ...
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add SNAT to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When SNAT is initialized in a 3-node circular topology
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| tc04-1518B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\
+| | ... | 1 user and 15 ports (sessions) per user.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize}
+| | ... | 3-node-IPv4-SNAT-1u-15p
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add SNAT to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When SNAT is initialized in a 3-node circular topology
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
+
+| tc05-1518B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\
+| | ... | 1 user and 15 ports (sessions) per user.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize}
+| | ... | 3-node-IPv4-SNAT-1u-15p
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add SNAT to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When SNAT is initialized in a 3-node circular topology
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
+
+| tc06-IMIX-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\
+| | ... | 1 user and 15 ports (sessions) per user.
+| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps
+| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-15p
+| | ... | AND | Show SNAT verbose | ${dut1}
+| | ... | AND | Show SNAT verbose | ${dut2}
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | ...
+| | ${framesize}= | Set Variable | IMIX_v4_1
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add SNAT to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When SNAT is initialized in a 3-node circular topology
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate}
+| | ... | ${threshold}