X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fperf%2F10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot;h=4b949623cfbc5dc4d900015d89751d1268e10d3a;hp=bc6e88349816766cf13e0c2692b87bdaf54ae47c;hb=e5fb9d5dd1b50f10ffd847e8c7acb75c0fd46477;hpb=1c9b487b0d3652e477490eb1237c5870296dc497

diff --git a/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot
index bc6e883498..4b949623cf 100644
--- a/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot
+++ b/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -13,13 +13,17 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/performance.robot
+| ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
 | ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_200K
+| ...
 | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
 | ... | L3 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
 | Documentation | *Reference NDR throughput IPv6 routing verify test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -41,27 +45,25 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
-| ${rts_per_flow}= | 100000
+| ${rts_per_flow}= | ${100000}
 
 *** Test Cases ***
 | tc01-78B-1t1c-ethip6-ip6scale200k-ndrchk
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
-| | ... | frames using single trial throughput test at 2x 2.9mpps.
+| | ... | frames using single trial throughput test at 2x 2.3mpps.
 | | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 2.9mpps
+| | ${framesize}= | Set Variable | ${78}
+| | ${rate}= | Set Variable | 2.3mpps
 | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ...   | ${rts_per_flow}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize}
-| | ...                                    | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
 
 | tc02-1518B-1t1c-ethip6-ip6scale200k-ndrchk
 | | [Documentation]
@@ -69,18 +71,16 @@
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
 | | ... | frames using single trial throughput test at 2x 812743pps.
 | | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
+| | ${framesize}= | Set Variable | ${1518}
 | | ${rate}= | Set Variable | 812743pps
 | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ...   | ${rts_per_flow}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize}
-| | ...                                    | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
 
 | tc03-9000B-1t1c-ethip6-ip6scale200k-ndrchk
 | | [Documentation]
@@ -88,126 +88,112 @@
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
 | | ... | frames using single trial throughput test at 2x 138580pps.
 | | [Tags] | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
+| | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 138580pps
 | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | And   Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ...   | ${rts_per_flow}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize}
-| | ...                                    | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
 
 | tc04-78B-2t2c-ethip6-ip6scale200k-ndrchk
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config with 2 thread, 2 phy core, \
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
-| | ... | frames using single trial throughput test at 2x 5.9mpps.
+| | ... | frames using single trial throughput test at 2x 5.0mpps.
 | | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 5.9mpps
+| | ${framesize}= | Set Variable | ${78}
+| | ${rate}= | Set Variable | 5.0mpps
 | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ...   | ${rts_per_flow}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize}
-| | ...                                    | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
 
 | tc05-1518B-2t2c-ethip6-ip6scale200k-ndrchk
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config with 2 thread, 2 phy core, \
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
 | | ... | frames using single trial throughput test at 2x 812743pps.
 | | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
+| | ${framesize}= | Set Variable | ${1518}
 | | ${rate}= | Set Variable | 812743pps
 | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ...   | ${rts_per_flow}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize}
-| | ...                                    | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
 
 | tc06-9000B-2t2c-ethip6-ip6scale200k-ndrchk
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config with 2 thread, 2 phy core, \
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
 | | ... | frames using single trial throughput test at 2x 138580pps.
 | | [Tags] | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
+| | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 138580pps
 | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | And   Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ...   | ${rts_per_flow}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize}
-| | ...                                    | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
 
 | tc07-78B-4t4c-ethip6-ip6scale200k-ndrchk
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config with 4 thread, 4 phy core, \
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
-| | ... | frames using single trial throughput test at 2x 10.3mpps.
+| | ... | frames using single trial throughput test at 2x 5.7mpps.
 | | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 10.3mpps
+| | ${framesize}= | Set Variable | ${78}
+| | ${rate}= | Set Variable | 5.7mpps
 | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ...   | ${rts_per_flow}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize}
-| | ...                                    | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
 
 | tc08-1518B-4t4c-ethip6-ip6scale200k-ndrchk
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config with 4 thread, 4 phy core, \
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
 | | ... | frames using single trial throughput test at 2x 812743pps.
 | | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
+| | ${framesize}= | Set Variable | ${1518}
 | | ${rate}= | Set Variable | 812743pps
 | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ...   | ${rts_per_flow}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize}
-| | ...                                    | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
 
 | tc09-9000B-4t4c-ethip6-ip6scale200k-ndrchk
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config with 4 thread, 4 phy core, \
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
 | | ... | frames using single trial throughput test at 2x 138580pps.
 | | [Tags] | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
+| | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 138580pps
 | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | And   Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ...   | ${rts_per_flow}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize}
-| | ...                                    | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}