X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fperf%2F10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot;h=2afb2804c4bf5863781daf16e2dfa7312648ee4c;hp=cb42a63878b51b50142e1f1c91365f7f51a1967a;hb=086f3a5065d744e00fe10289eb2f090b7bde208e;hpb=7e77c9160cc3eb6f7f585df70231c4eeb07421d4

diff --git a/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot
index cb42a63878..2afb2804c4 100644
--- a/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot
+++ b/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot
@@ -12,19 +12,19 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance.robot
+| Resource | resources/libraries/robot/performance_setup.robot
 | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
 | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
 | ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
 | ...
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L3 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
+| Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance ndrchk test teardown
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance ndrchk test
 | ...
 | Documentation | *Reference NDR throughput Lisp tunnel verify test cases*
 | ...
@@ -47,6 +47,10 @@
 | ... | IP protocol=61 and generated payload.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
+*** Variables ***
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6src253
+
 *** Test Cases ***
 | tc01-78B-1t1c-ethip6lispip6-ip6base-ndrchk
 | | [Documentation]
@@ -57,20 +61,20 @@
 | | [Tags] | 78B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${78}
 | | ${rate}= | Set Variable | 1.56mpps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc02-1460B-1t1c-ethip6lispip6-ip6base-ndrchk
 | | [Documentation]
@@ -81,20 +85,20 @@
 | | [Tags] | 1460B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${1460}
 | | ${rate}= | Set Variable | 740000pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc03-9000B-1t1c-ethip6lispip6-ip6base-ndrchk
 | | [Documentation]
@@ -105,19 +109,19 @@
 | | [Tags] | 9000B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 120000pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc04-78B-2t2c-ethip6lispip6-ip6base-ndrchk
 | | [Documentation]
@@ -128,20 +132,20 @@
 | | [Tags] | 78B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${78}
 | | ${rate}= | Set Variable | 3.2mpps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc05-1460B-2t2c-ethip6lispip6-ip6base-ndrchk
 | | [Documentation]
@@ -152,20 +156,20 @@
 | | [Tags] | 1460B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${1460}
 | | ${rate}= | Set Variable | 740000pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc06-9000B-2t2c-ethip6lispip6-ip6base-ndrchk
 | | [Documentation]
@@ -176,19 +180,19 @@
 | | [Tags] | 9000B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 120000pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc07-78B-4t4c-ethip6lispip6-ip6base-ndrchk
 | | [Documentation]
@@ -199,20 +203,20 @@
 | | [Tags] | 78B | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | ${78}
 | | ${rate}= | Set Variable | 3.2mpps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc08-1460B-4t4c-ethip6lispip6-ip6base-ndrchk
 | | [Documentation]
@@ -223,20 +227,20 @@
 | | [Tags] | 1460B | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | ${1460}
 | | ${rate}= | Set Variable | 740000pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${framesize} | ${traffic_profile}
 
 | tc09-9000B-4t4c-ethip6lispip6-ip6base-ndrchk
 | | [Documentation]
@@ -247,17 +251,16 @@
 | | [Tags] | 9000B | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | ${9000}
 | | ${rate}= | Set Variable | 120000pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
 | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
 | | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${NONE}
 | | ... | ${dut2} | ${dut2_if1} | ${NONE}
 | | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
 | | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
 | | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
-
+| | ... | ${framesize} | ${traffic_profile}