X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fperf%2F10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot;h=b0f79a749f6b6c91168c3d358ec7f610cade1c5f;hp=bd18ec321a1cf27c84aa2a8c0165fb679020babe;hb=e5fb9d5dd1b50f10ffd847e8c7acb75c0fd46477;hpb=e3ed9257cd7ef50b44eca72ef7d9ae6c7c792647 diff --git a/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot index bd18ec321a..b0f79a749f 100644 --- a/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,15 +14,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot -# import additional Lisp settings from resource file | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT -| ... | NIC_Intel-X520-DA2 | PERFTEST_ENCAP | LISP +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK +| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput Lisp tunnel verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -45,225 +48,216 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Test Cases *** -| TC01: Verify 78B ref-NDR at 2x 1.56Mpps - DUT IPv6 - 1thread 1core 1rxq +| tc01-78B-1t1c-ethip6lispip6-ip6base-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Verify ref-NDR for 78 Byte frames using single trial\ -| | ... | throughput test. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6 -| | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 +| | ... | throughput test at 2x 1.56mpps. +| | [Tags] | 1T1C | STHREAD +| | ${framesize}= | Set Variable | ${78} | | ${rate}= | Set Variable | 1.56mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 -| TC02: Verify 1460B ref-NDR at 2x 740kpps - DUT IPv6 - 1thread 1core 1rxq +| tc02-1460B-1t1c-ethip6lispip6-ip6base-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial\ -| | ... | throughput test. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6 -| | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 +| | ... | throughput test at 2x 740000pps. +| | [Tags] | 1T1C | STHREAD +| | ${framesize}= | Set Variable | ${1460} | | ${rate}= | Set Variable | 740000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 -| TC03: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv6 - 1thread 1core 1rxq +| tc03-9000B-1t1c-ethip6lispip6-ip6base-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial\ -| | ... | throughput test. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6 -| | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 +| | ... | throughput test at 2x 120000pps. +| | [Tags] | 1T1C | STHREAD +| | ${framesize}= | Set Variable | ${9000} | | ${rate}= | Set Variable | 120000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 -| TC04: Verify 78B ref-NDR at 2x 3.2Mpps - DUT IPv6 - 2thread 2core 1rxq +| tc04-78B-2t2c-ethip6lispip6-ip6base-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs LISP tunnel config with 2 thread, 2 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Verify ref-NDR for 78 Byte frames using single trial\ -| | ... | throughput test. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6 -| | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 +| | ... | throughput test at 2x 3.2mpps. +| | [Tags] | 2T2C | MTHREAD +| | ${framesize}= | Set Variable | ${78} | | ${rate}= | Set Variable | 3.2mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 -| TC05: Verify 1460B ref-NDR at 2x 740kpps - DUT IPv6 - 2thread 2core 1rxq +| tc05-1460B-2t2c-ethip6lispip6-ip6base-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial\ -| | ... | throughput test. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6 -| | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 +| | ... | throughput test at 2x 740000pps. +| | [Tags] | 2T2C | MTHREAD +| | ${framesize}= | Set Variable | ${1460} | | ${rate}= | Set Variable | 740000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 -| TC06: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv6 - 2thread 2core 1rxq +| tc06-9000B-2t2c-ethip6lispip6-ip6base-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial\ -| | ... | throughput test. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6 -| | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 +| | ... | throughput test at 2x 120000pps. +| | [Tags] | 2T2C | MTHREAD +| | ${framesize}= | Set Variable | ${9000} | | ${rate}= | Set Variable | 120000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 -| TC07: Verify 78B ref-NDR at 2x 3.2Mpps - DUT IPv6 - 4thread 4core 2rxq +| tc07-78B-4t4c-ethip6lispip6-ip6base-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores,\ | | ... | 2 receive queues per NIC port. | | ... | [Ver] Verify ref-NDR for 78 Byte frames using single trial\ -| | ... | throughput test. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6 -| | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 +| | ... | throughput test at 2x 3.2mpps. +| | [Tags] | 4T4C | MTHREAD +| | ${framesize}= | Set Variable | ${78} | | ${rate}= | Set Variable | 3.2mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 -| TC08: Verify 1460B ref-NDR at 2x 740kpps - DUT IPv6 - 4thread 4core 2rxq +| tc08-1460B-4t4c-ethip6lispip6-ip6base-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores,\ | | ... | 2 receive queues per NIC port. | | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial\ -| | ... | throughput test. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6 -| | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 +| | ... | throughput test at 2x 740000pps. +| | [Tags] | 4T4C | MTHREAD +| | ${framesize}= | Set Variable | ${1460} | | ${rate}= | Set Variable | 740000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 -| TC09: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv6 - 4thread 4core 2rxq +| tc09-9000B-4t4c-ethip6lispip6-ip6base-ndrchk | | [Documentation] | | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores,\ | | ... | 2 receive queues per NIC port. | | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial\ -| | ... | throughput test. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6 -| | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 +| | ... | throughput test at 2x 120000pps. +| | [Tags] | 4T4C | MTHREAD +| | ${framesize}= | Set Variable | ${9000} | | ${rate}= | Set Variable | 120000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6