X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fsuites%2Fhoneycomb%2F021_l2_fib.robot;fp=tests%2Fsuites%2Fhoneycomb%2F021_l2_fib.robot;h=0000000000000000000000000000000000000000;hp=ec07e104ade0f874d15ddc7052fa0833bf0161e6;hb=70cbaaee0e6210682ce6d278ea645b8bea153b67;hpb=7c3e0cc41f55327d6eeb04fe757c6e80064ab28a

diff --git a/tests/suites/honeycomb/021_l2_fib.robot b/tests/suites/honeycomb/021_l2_fib.robot
deleted file mode 100644
index ec07e104ad..0000000000
--- a/tests/suites/honeycomb/021_l2_fib.robot
+++ /dev/null
@@ -1,228 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Resource | resources/libraries/robot/honeycomb/l2_fib.robot
-| Variables | resources/test_data/honeycomb/l2_fib.py
-| Documentation | *Honeycomb L2 FIB management test suite.*
-| Suite Setup | Run keywords
-| ... | Set test interface down
-| ... | AND
-| ... | Honeycomb removes all bridge domains | ${node}
-| Suite Teardown | Honeycomb removes all bridge domains | ${node}
-| Force tags | honeycomb_sanity
-
-*** Variables ***
-# Interface to run tests on.
-| ${interface}= | ${node['interfaces']['port1']['name']}
-
-*** Test Cases ***
-| Honeycomb adds L2 FIB entry (forward)
-| | [Documentation] | Honeycomb creates a bridge domain and assignes an \
-| | ... | interface to it. Then adds an L2 FIB entry (forward) to the bridge \
-| | ... | domain.
-| | ...
-| | [Teardown] | Honeycomb removes L2 FIB entry
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']}
-| | ...
-| | Given Interface state from Honeycomb should be
-| | ... | ${node} | ${interface} | down
-| | When Honeycomb sets interface state
-| | ... | ${node} | ${interface} | up
-| | Then Interface state from Honeycomb should be
-| | ... | ${node} | ${interface} | up
-| | When Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | Then Bridge domain configuration from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | Given Bridge domain configuration in interface operational data should be empty
-| | ... | ${node} | ${interface}
-| | When Honeycomb adds interface to bridge domain
-| | ... | ${node} | ${interface} | ${bd_name} | ${if_bd_settings}
-| | Then Bridge domain configuration in interface operational data should be
-| | ... | ${node} | ${interface} | ${if_bd_settings}
-| | Given L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-| | When Honeycomb adds L2 FIB entry to bridge domain
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg}
-| | Then L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
-| | And L2 FIB entry from VAT should be
-| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
-
-| Honeycomb adds L2 FIB entry (static, forward)
-| | [Documentation] | Honeycomb adds an L2 FIB entry (static, forward) to the \
-| | ... | bridge domain.
-| | ...
-| | [Teardown] | Honeycomb removes L2 FIB entry
-| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper['phys-address']}
-| | ...
-| | Given Bridge domain configuration in interface operational data should be
-| | ... | ${node} | ${interface} | ${if_bd_settings}
-| | And L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-| | When Honeycomb adds L2 FIB entry to bridge domain
-| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg}
-| | Then L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper}
-| | And L2 FIB entry from VAT should be
-| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat}
-
-| Honeycomb adds L2 FIB entry (static, filter)
-| | [Documentation] | Honeycomb adds an L2 FIB entry (static, filter) to the \
-| | ... | bridge domain.
-| | ...
-| | [Teardown] | Honeycomb removes L2 FIB entry
-| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper['phys-address']}
-| | ...
-| | Given Bridge domain configuration in interface operational data should be
-| | ... | ${node} | ${interface} | ${if_bd_settings}
-| | And L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-| | When Honeycomb adds L2 FIB entry to bridge domain
-| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg}
-| | Then L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper}
-| | And L2 FIB entry from VAT should be
-| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat}
-
-| Honeycomb adds and removes L2 FIB entry (forward)
-| | [Documentation] | Honeycomb adds an L2 FIB entry (forward) to the bridge \
-| | ... | domain and then Honeycomb removes it from the bridge domain.
-| | ...
-| | [Teardown] | Honeycomb removes L2 FIB entry
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']}
-| | ...
-| | Given Bridge domain configuration in interface operational data should be
-| | ... | ${node} | ${interface} | ${if_bd_settings}
-| | And L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-| | When Honeycomb adds L2 FIB entry to bridge domain
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg}
-| | Then L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
-| | And L2 FIB entry from VAT should be
-| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
-| | When Honeycomb removes L2 FIB entry
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']}
-| | Then L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-
-| Honeycomb adds more than one L2 FIB entry
-| | [Documentation] | Honeycomb adds three L2 FIB entries to the bridge domain.
-| | ...
-| | [Teardown] | Honeycomb removes all L2 FIB entries
-| | ... | ${node} | ${bd_name}
-| | ...
-| | Given Bridge domain configuration in interface operational data should be
-| | ... | ${node} | ${interface} | ${if_bd_settings}
-| | And L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-| | When Honeycomb adds L2 FIB entry to bridge domain
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg}
-| | And Honeycomb adds L2 FIB entry to bridge domain
-| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg}
-| | And Honeycomb adds L2 FIB entry to bridge domain
-| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg}
-| | Then L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
-| | And L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper}
-| | And L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper}
-| | And L2 FIB entry from VAT should be
-| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
-| | And L2 FIB entry from VAT should be
-| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat}
-| | And L2 FIB entry from VAT should be
-| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat}
-
-| Honeycomb fails to set wrong L2 FIB entry
-| | [Documentation] | Honeycomb tries to add an L2 FIB entry with wrong \
-| | ... | parameters to the bridge domain. It must fail.
-| | ...
-| | [Teardown] | Honeycomb removes all L2 FIB entries
-| | ... | ${node} | ${bd_name}
-| | ...
-| | Given Bridge domain configuration in interface operational data should be
-| | ... | ${node} | ${interface} | ${if_bd_settings}
-| | And L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-| | When Honeycomb fails to add wrong L2 FIB entry
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_mac}
-| | Then L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-| | When Honeycomb fails to add wrong L2 FIB entry
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_if}
-| | Then L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-| | When Honeycomb fails to add wrong L2 FIB entry
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_action}
-| | Then L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-
-| Honeycomb fails to modify existing L2 FIB entry
-| | [Documentation] | Honeycomb tries to modify an existing L2 FIB entry. It \
-| | ... | must fail.
-| | ...
-| | [Teardown] | Honeycomb removes all L2 FIB entries
-| | ... | ${node} | ${bd_name}
-| | ...
-| | Given Bridge domain configuration in interface operational data should be
-| | ... | ${node} | ${interface} | ${if_bd_settings}
-| | And L2 FIB Table from Honeycomb should be empty
-| | ... | ${node} | ${bd_name}
-| | And L2 FIB Table from VAT should be empty
-| | ... | ${node} | ${bd_index}
-| | When Honeycomb adds L2 FIB entry to bridge domain
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg}
-| | Then L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
-| | When Honeycomb fails to modify L2 FIB entry
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']}
-| | ... | outgoing-interface
-| | ... | ${l2_fib_forward_modified_cfg['outgoing-interface']}
-| | Then L2 FIB Entry from Honeycomb should be
-| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
-| | And L2 FIB entry from VAT should be
-| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
-
-*** Keywords ***
-| Set test interface down
-| | [Documentation] | Set the interface used in tests down.
-| | ...
-| | Honeycomb sets interface state
-| | ... | ${node} | ${interface} | down