X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fsuites%2Fperformance%2FShort_IPv4_Cop_Intel-X520-DA2.robot;h=1a6e15acaf87b18a7bbcb4c31c254dbd9b7ba564;hp=f17b2f8a709a93dd5f5631e489fbd6b81b356a33;hb=5ad0974e71987a18cb9a750073313d98f76412f2;hpb=a74531b4483ae9122ba18e064cd20b8550039d21

diff --git a/tests/suites/performance/Short_IPv4_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Short_IPv4_Cop_Intel-X520-DA2.robot
index f17b2f8a70..1a6e15acaf 100644
--- a/tests/suites/performance/Short_IPv4_Cop_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Short_IPv4_Cop_Intel-X520-DA2.robot
@@ -22,15 +22,36 @@
 | ... | L3 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | Minimal throughput acceptance test cases
+| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
+| ...           | AND          | Show vpp trace dump on all DUTs
+| Documentation | *Reference NDR throughput IPv4 whitelist verify test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing, two static IPv4 /24 routes and IPv4 COP security whitelist
+| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In short performance tests, TG verifies
+| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet
+| ... | loss tolerance. Ref-NDR value is periodically updated acording to
+| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long
+| ... | performance tests for the same DUT configuration. Test packets are
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3
+| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with
+| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61
+| ... | and generated payload. MAC addresses are matching MAC addresses of the
+| ... | TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Test Cases ***
-| 1core VPP passes 64B frames through IPv4 forwarding with COP at 2x 3.5Mpps in 3-node topology
+| TC01: Verify 64B ref-NDR at 2x 3.5Mpps - DUT IPv4 whitelist - 1thread 1core 1rxq
 | | [Documentation]
-| | ... | VPP with 1 core should pass 64B frames through IPv4 forwarding
-| | ... | at 2x 3.5Mpps in 3-node topology
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 64 Byte frames using single trial throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps
@@ -48,11 +69,12 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv4
 
-| 1core VPP passes 1518B frames through IPv4 forwarding with COP at 2x 812,743pps in 3-node topology
+| TC02: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 whitelist - 1thread 1core 1rxq
 | | [Documentation]
-| | ... | VPP with 1 core should pass 1518B frames through IPv4 forwarding
-| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology with COP.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 1518 Byte frames using single trial throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
@@ -70,11 +92,12 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv4
 
-| 1core VPP passes 9000B frames through IPv4 forwarding with COP at 2x 138,580pps in 3-node topology
+| TC03: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 whitelist - 1thread 1core 1rxq
 | | [Documentation]
-| | ... | VPP with 1 core should pass 9000B frames through IPv4 forwarding
-| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology with COP.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 9000 Byte frames using single trial throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
@@ -91,14 +114,15 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-IPv4
 
-| 2core VPP with rxqueues 1 passes 64B frames through IPv4 forwarding with COP at 2x 7.5Mpps in 3-node topology
+| TC04: Verify 64B ref-NDR at 2x 6.6Mpps - DUT IPv4 whitelist - 2thread 2core 1rxq
 | | [Documentation]
-| | ... | VPP with 2 cores should pass 64B frames through IPv4 forwarding
-| | ... | at 2x 7.5Mpps (2x 10Gbps) in 3-node topology with COP.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 64 Byte frames using single trial throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 7.5mpps
+| | ${rate}= | Set Variable | 6.6mpps
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
@@ -113,11 +137,12 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-IPv4
 
-| 2core VPP with rxqueues 1 passes 1518B frames through IPv4 forwarding with COP at 2x 812,743pps in 3-node topology
+| TC05: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 whitelist - 2thread 2core 1rxq
 | | [Documentation]
-| | ... | VPP with 2 cores should pass 1518B frames through IPv4 forwarding
-| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology with COP.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 1518 Byte frames using single trial throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
@@ -135,11 +160,12 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-IPv4
 
-| 2core VPP with rxqueues 1 passes 9000B frames through IPv4 forwarding with COP at 2x 138,580pps in 3-node topology
+| TC06: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 whitelist - 2thread 2core 1rxq
 | | [Documentation]
-| | ... | VPP with 2 cores should pass 9000B frames through IPv4 forwarding
-| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology with COP.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 9000 Byte frames using single trial throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
@@ -156,14 +182,15 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-IPv4
 
-| 4core VPP with rxqueues 2 passes 64B frames through IPv4 forwarding with COP at 2x 7.8Mpps in 3-node topology
+| TC07: Verify 64B ref-NDR at 2x 10.0Mpps - DUT IPv4 whitelist - 4threads 4cores 2rxq
 | | [Documentation]
-| | ... | VPP with 4 cores and rxqueues 2 should pass 64B frames through IPv4
-| | ... | forwarding at 2x 7.8Mpps in 3-node topology with COP.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 64 Byte frames using single trial throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 7.8mpps
+| | ${rate}= | Set Variable | 10.0mpps
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
@@ -178,11 +205,12 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-IPv4
 
-| 4core VPP with rxqueues 2 passes 1518B frames through IPv4 forwarding with COP at 2x 812,743pps in 3-node topology
+| TC08: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 whitelist - 4threads 4cores 2rxq
 | | [Documentation]
-| | ... | VPP with 4 cores and rxqueues 2 should pass 1518B frames through IPv4
-| | ... | forwarding at 2x 812,743pps (2x 10Gbps) in 3-node topology with COP.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 1518 Byte frames using single trial throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
@@ -200,11 +228,12 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-IPv4
 
-| 4core VPP with rxqueues 2 passes 9000B frames through IPv4 forwarding with COP at 2x 138,580pps in 3-node topology
+| TC09: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 whitelist - 4threads 4cores 2rxq
 | | [Documentation]
-| | ... | VPP with 4 cores and rxqueues 2 should pass 9000B frames through IPv4
-| | ... | forwarding at 2x 138,580pps (2x 10Gbps) in 3-node topology with COP.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 9000 Byte frames using single trial throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps