X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fsuites%2Fperformance%2FShort_IPv6_Intel-X520-DA2.robot;h=4b79a3495dfc4fbf0d42d2b9f4854f9c04049dcf;hp=c5858455b1145e42ac577d7ecab4a3ccb22989ab;hb=e2f3f7663bd9bda3b41c877495a2601c9839abd1;hpb=5fc98f4706be2c12b93040e5eeef245a774f714b

diff --git a/tests/suites/performance/Short_IPv6_Intel-X520-DA2.robot b/tests/suites/performance/Short_IPv6_Intel-X520-DA2.robot
index c5858455b1..4b79a3495d 100644
--- a/tests/suites/performance/Short_IPv6_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Short_IPv6_Intel-X520-DA2.robot
@@ -21,13 +21,31 @@
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
 | Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | Minimal throughput acceptance test cases
+| Documentation | *Reference NDR throughput IPv6 routing verify test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In short performance tests, TG verifies
+| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet
+| ... | loss tolerance. Ref-NDR value is periodically updated acording to
+| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long
+| ... | performance tests for the same DUT confiiguration. Test packets are
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3
+| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with
+| ... | all packets containing Ethernet header, IPv6 header and generated
+| ... | payload.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Test Cases ***
-| 1core VPP passes 78B frames through IPv6 forwarding at 2x 2.9Mpps in 3-node topology
+| TC01: Verify 78B ref-NDR at 2x 2.9Mpps - DUT IPv6 - 1thread 1core 1rxq
 | | [Documentation]
-| | ... | VPP with 1 core should pass 78B frames through IPv6 forwarding
-| | ... | at 2x2.9Mpps in 3-node topology.
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
+| | ... | frames using single trial throughput test.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
@@ -40,10 +58,11 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv6
 
-| 1core VPP passes 1518B frames through IPv6 forwarding at 2x 812,743pps in 3-node topology
+| TC02: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv6 - 1thread 1core 1rxq
 | | [Documentation]
-| | ... | VPP with 1 core should pass 1518B frames through IPv6 forwarding
-| | ... | at 2x812,743pps (2x 10Gbps) in 3-node topology.
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
+| | ... | frames using single trial throughput test.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
@@ -56,10 +75,11 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv6
 
-| 1core VPP passes 9000B frames through IPv6 forwarding at 2x 138,580pps in 3-node topology
+| TC03: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv6 - 1thread 1core 1rxq
 | | [Documentation]
-| | ... | VPP with 1 core should pass 9000B frames through IPv6 forwarding
-| | ... | at 2x138,580pps (2x 10Gbps) in 3-node topology.
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
+| | ... | frames using single trial throughput test.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
@@ -71,10 +91,11 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv6
 
-| 2core VPP with rxqueues 1 passes 78B frames through IPv6 forwarding at 2x 5.9Mpps in 3-node topology
+| TC04: Verify 78B ref-NDR at 2x 5.9Mpps - DUT IPv6 - 2thread 2core 1rxq
 | | [Documentation]
-| | ... | VPP with 2 cores should pass 78B frames through IPv6 forwarding
-| | ... | at 2x5.9Mpps in 3-node topology.
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
+| | ... | frames using single trial throughput test.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
@@ -87,10 +108,11 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv6
 
-| 2core VPP with rxqueues 1 passes 1518B frames through IPv6 forwarding at 2x 812,743pps in 3-node topology
+| TC05: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv6 - 2thread 2core 1rxq
 | | [Documentation]
-| | ... | VPP with 2 cores should pass 1518B frames through IPv6 forwarding
-| | ... | at 2x812,743pps (2x 10Gbps) in 3-node topology.
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
+| | ... | frames using single trial throughput test.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
@@ -103,10 +125,11 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv6
 
-| 2core VPP with rxqueues 1 passes 9000B frames through IPv6 forwarding at 2x 138,580pps in 3-node topology
+| TC06: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv6 - 2thread 2core 1rxq
 | | [Documentation]
-| | ... | VPP with 2 cores should pass 9000B frames through IPv6 forwarding
-| | ... | at 2x138,580pps (2x 10Gbps) in 3-node topology.
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
+| | ... | frames using single trial throughput test.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
@@ -118,10 +141,11 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv6
 
-| 4core VPP with rxqueues 2 passes 78B frames through IPv6 forwarding at 2x 7.3Mpps in 3-node topology
+| TC07: Verify 78B ref-NDR at 2x 7.3Mpps - DUT IPv6 - 4thread 4core 2rxq
 | | [Documentation]
-| | ... | VPP with 4 cores and rxqueues 2 should pass 78B frames through IPv6
-| | ... | forwarding at 2x7.3Mpps in 3-node topology.
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 78 Byte
+| | ... | frames using single trial throughput test.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
@@ -134,10 +158,11 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv6
 
-| 4core VPP with rxqueues 2 passes 1518B frames through IPv6 forwarding at 2x 812,743pps in 3-node topology
+| TC08: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv6 - 4thread 4core 2rxq
 | | [Documentation]
-| | ... | VPP with 4 cores and rxqueues 2 should pass 1518B frames through IPv6
-| | ... | forwarding at 2x812,743pps (2x 10Gbps) in 3-node topology.
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 1518 Byte
+| | ... | frames using single trial throughput test.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
@@ -150,10 +175,11 @@
 | | Then  Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                    | ${framesize} | 3-node-IPv6
 
-| 4core VPP with rxqueues 2 passes 9000B frames through IPv6 forwarding at 2x 138,580pps in 3-node topology
+| TC09: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv6 - 4thread 4core 2rxq
 | | [Documentation]
-| | ... | VPP with 4 cores and rxqueues 2 should pass 9000B frames through IPv6
-| | ... | forwarding at 2x138,580pps (2x 10Gbps) in 3-node topology.
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 9000 Byte
+| | ... | frames using single trial throughput test.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10