X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fdevice%2Fl2bd%2Feth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot;fp=tests%2Fvpp%2Fdevice%2Fl2bd%2Feth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot;h=0000000000000000000000000000000000000000;hp=5c10713ba0936c437513fe04686eef3be39ccd17;hb=5764620e7a5c9f637da93b8c21a3b8f53abbdef1;hpb=f94785edae14c6b2e9bef270a633717975c35a6d

diff --git a/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot b/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot
deleted file mode 100644
index 5c10713ba0..0000000000
--- a/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot
+++ /dev/null
@@ -1,95 +0,0 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | DOT1Q | L2BDMACLRN | BASE | DRV_AVF | GBP
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | avf-dot1q-l2bdbasemaclrn-gbp
-|
-| Suite Setup | Setup suite topology interfaces | scapy
-| Suite Teardown | Tear down suite
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace
-|
-| Test Template | Local template
-|
-| Documentation | *L2BD with IEEE 802.1Q and GBP test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \
-| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
-| ... | 2 VLAN subinterfaces (VID 200 and 300),\
-| ... | 1 L2 BD with the 2 VLAN subinterfaces and a BVI,\
-| ... | 1 GBP L3 RD,\
-| ... | 1 GBP L2 BD with the L2 BD,\
-| ... | 1 GBP EPG EPG-1 with sclass 100, the GBP L2 BD and L3 RD,\
-| ... | 2 GBP external EP in EPG-1,\
-| ... | 2 external subnets with sclass 200 and 300,\
-| ... | Contracts allowing full communications between the 2 external subnets.\
-| ... | DUT1 tested with ${nic_name} with VF enabled.
-| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
-| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
-| ... | and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
-
-*** Variables ***
-| @{plugins_to_enable}= | avf_plugin.so | gbp_plugin.so | acl_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | virtual
-| ${nic_driver}= | avf
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 1
-| ${overhead}= | ${4}
-
-*** Keywords ***
-| Local template
-| | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packet in one direction between two\
-| | ... | of its interfaces to be switched by DUT to and from docker.\
-| | ... | Make TG verify IPv4 packet is correct.
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize layer dot1q
-| | And Initialize GBP routing domains
-| | Then Send packet and verify headers
-| | ... | ${tg} | 10.10.10.2 | 20.20.20.2
-| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ba:dc:00:ff:ee:01
-| | ... | ${TG_pf2}[0] | ba:dc:00:ff:ee:01 | ${TG_pf2_mac}[0]
-| | ... | traffic_script=send_ip_check_headers
-
-*** Test Cases ***
-| 64B-avf-dot1q-l2bdbasemaclrn-gbp-dev
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${0}