X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fhoneycomb%2Fmgmt-cfg-lisp-apihc-apivat-func.robot;fp=tests%2Fvpp%2Ffunc%2Fhoneycomb%2Fmgmt-cfg-lisp-apihc-apivat-func.robot;h=0000000000000000000000000000000000000000;hp=0198e8205c634da8625705ad09fd8b274d82ae11;hb=0cf1f0204e326cf93e36b344e2efd3cfa2f82870;hpb=26d187d5325a83edec75f5c514d350f08fe97bab diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot deleted file mode 100644 index 0198e8205c..0000000000 --- a/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot +++ /dev/null @@ -1,310 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -| ${ip_address}= | 192.168.0.4 -| @{ip_addresses}= | 192.168.0.5 | 192.168.0.6 | 192.168.0.7 | 192.168.0.8 -| ${state}= | enabled -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${bd_name}= | bd_lisp -| ${bd2_name}= | bd2_lisp -| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} -| ... | unknown-unicast-flood=${True} | arp-termination=${True} - -*** Settings *** -| Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/lisp.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Variables | resources/test_data/honeycomb/lisp/lisp.py -| ... -| Documentation | *Honeycomb Lisp test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Honeycomb enables LISP feature -| | [Documentation] | Check if Honeycomb can enable the LISP feature. -| | ... -| | Given LISP Should Not Be Configured | ${node} -| | When Honeycomb enables LISP | ${node} -| | Then LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} - -| TC02: Honeycomb adds locator set and locator -| | [Documentation] | Check if Honeycomb can configure a locator set. -| | ... -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | When Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Then Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} - -| TC15: Honeycomb can remove configuration of LISP features -| | [Documentation] | Check if Honeycomb can disable all LISP features. -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | When Honeycomb disables all LISP features | ${node} -| | Then LISP Should Not Be Configured | ${node} - -| TC03: Honeycomb configures LISP - remote mapping - Bridge Domain -| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\ -| | ... | with a bridge domain. -| | ... -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | And Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_bd} -| | Then LISP mapping from Honeycomb should be -| | ... | ${node} | ${remote_bd_subtable} -| | And LISP mapping from VAT should be -| | ... | ${node} | ${vat_remote_bd} - -| TC04: Honeycomb can remove LISP mapping -| | [Documentation] | Check if Honeycomb can remove a configured LISP mapping. -| | ... -| | Given LISP mapping from Honeycomb should be -| | ... | ${node} | ${remote_bd_subtable} -| | And LISP mapping from VAT should be -| | ... | ${node} | ${vat_remote_bd} -| | When Honeycomb removes all LISP mappings | ${node} -| | Then LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} - -| TC05: Honeycomb configures LISP - remote mapping - VRF -| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\ -| | ... | with VRF. -| | ... -| | [Teardown] | Honeycomb removes all LISP mappings | ${node} -| | ... -| | Given LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_vrf} -| | Then LISP mapping from Honeycomb should be -| | ... | ${node} | ${remote_vrf_subtable} -| | And LISP mapping from VAT should be | ${node} | ${vat_remote_vrf} - -| TC06: Honeycomb configures LISP - local mapping - Bridge Domain -| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\ -| | ... | with a bridge domain. -| | ... -| | [Teardown] | Honeycomb removes all LISP mappings | ${node} -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | And LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | And Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd2_name} | ${bd_settings} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_bd} -| | Then LISP mapping from Honeycomb should be | ${node} | ${local_bd_subtable} -| | And LISP mapping from VAT should be | ${node} | ${vat_local_bd} - -| TC07: Honeycomb configures LISP - local mapping - VRF -| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\ -| | ... | with VRF. -| | ... -| | [Teardown] | Honeycomb removes all LISP mappings | ${node} -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | And LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_vrf} -| | Then LISP mapping from Honeycomb should be | ${node} | ${local_vrf_subtable} -| | And LISP mapping from VAT should be | ${node} | ${vat_local_vrf} - -| TC08: Honeycomb configures LISP mapping with adjacency -| | [Documentation] | Check if Honeycomb can configure local and remote LISP\ -| | ... | mappings with VRF, and configure adjacency. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | And LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | And Honeycomb adds LISP mapping | ${node} | ${lisp_settings_both_vrf} -| | When Honeycomb adds LISP adjacency | ${node} | ${7} | remote_map_vrf -| | ... | adj01 | ${vrf_adjacency} -| | Then LISP mapping from Honeycomb should be -| | ... | ${node} | ${adj_subtable} - -| TC09: Honeycomb configures LISP Map Resolver -| | [Documentation] | Check if Honeycomb can configure a LISP Map Resolver. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb adds LISP Map Resolver | ${node} | ${ip_address} -| | Then Map Resolver from Honeycomb should be | ${node} | ${ip_address} -| | And Map Resolver from VAT should be | ${node} | ${ip_address} - -| TC10: Honeycomb configures LISP Map Server -| | [Documentation] | Check if Honeycomb can configure a LISP Map Server. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb adds LISP Map Server | ${node} | @{ip_addresses} -| | Then Map Server from Honeycomb should be | ${node} | @{ip_addresses} -| | And Map Server from VAT should be | ${node} | @{ip_addresses} - -| TC11: Honeycomb configures LISP PETR configuration -| | [Documentation] | Check if Honeycomb can configure LISP -| | ... | PETR configuration. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb enables LISP PETR feature | ${node} | ${ip_address} -| | Then PETR configuration from Honeycomb should be | ${node} | ${ip_address} -| | And PETR configuration from VAT should be | ${node} | enabled - -| TC12: Honeycomb configures LISP RLOC Probing -| | [Documentation] | Check if Honeycomb can configure LISP RLOC Probing. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb enables LISP RLOC feature | ${node} -| | Then RLOC Probing from Honeycomb should be | ${node} | ${True} -| | And RLOC Probing from VAT should be | ${node} | enabled - -| TC13: Honeycomb configures LISP Map Register -| | [Documentation] | Check if Honeycomb can configure a LISP Map Register. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb adds LISP Map Register | ${node} | ${True} -| | Then Map Register from Honeycomb should be | ${node} | ${True} -| | And Map Register from VAT should be | ${node} | enabled - -| TC14: Honeycomb enabled LISP PITR feature -| | [Documentation] | Check if Honeycomb can configure the LISP PITR feature. -| | ... -# HC2VPP-263 Locator set reference in operational data is incorrect -| | [Tags] | EXPECTED_FAILING -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | When Honeycomb enables LISP PITR feature | ${node} | ${locator_set} -| | Then PITR config from Honeycomb should be | ${node} | ${locator_set} -| | And PITR config from VAT should be | ${node} | ${locator_set} - -| TC16: Honeycomb can configure LISP for traffic test - IPv4 -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv4-LISP. -| | ... | [Cfg] On DUT1 configure IPv4 LISP static adjacencies with TG. -| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces through\ -| | ... | DUT1 and verify LISP encapsulation of received packet. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | LISP Functional Traffic Test Teardown -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4} -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip4} | ${tg_to_dut_if1_mac} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac} -| | When Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set} -| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip4} -| | Then send packet and verify LISP encap -| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${src_rloc4} | ${dst_rloc4} - -| TC17: Honeycomb can configure LISP for traffic test - IPv6 -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv6-LISP. -| | ... | [Cfg] On DUT1 configure IPv6 LISP static adjacencies with TG. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces through\ -| | ... | DUT1 and verify LISP encapsulation of received packet. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | LISP Functional Traffic Test Teardown -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6} -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip6} | ${tg_to_dut_if1_mac} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac} -| | When Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set} -| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip6} -| | Then send packet and verify LISP encap -| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${src_rloc6} | ${dst_rloc6} - -| TC18: Honeycomb configures LISP Map Request Mode -| | [Documentation] | Check if Honeycomb can configure LISP Map Request mode. -| | ... | Note: Map Request Mode cannot be removed once configured. -| | ... -| | [Teardown] | Honeycomb disables LISP | ${node} -| | ... -| | Given Honeycomb Enables LISP | ${node} -| | When Honeycomb sets LISP Map Request Mode | ${node} | ${True} -| | Then Map Request Mode from Honeycomb should be -| | ... | ${node} | source-destination -| | And Map Request Mode from VAT should be | ${node} | src-dst