X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fip4%2Feth2p-dot1q-ip4base-func.robot;fp=tests%2Fvpp%2Ffunc%2Fip4%2Feth2p-dot1q-ip4base-func.robot;h=0000000000000000000000000000000000000000;hp=123969a867c4640f3d0f52110760d37318cbd929;hb=7d7259ab1a065f0d1f849b29270514eacd3a1efe;hpb=fb3aba8bd6418418d9b3741839c4b305d8c72a4e

diff --git a/tests/vpp/func/ip4/eth2p-dot1q-ip4base-func.robot b/tests/vpp/func/ip4/eth2p-dot1q-ip4base-func.robot
deleted file mode 100644
index 123969a867..0000000000
--- a/tests/vpp/func/ip4/eth2p-dot1q-ip4base-func.robot
+++ /dev/null
@@ -1,106 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.IPv6Util
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/tagging.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | VM_ENV | HW_ENV | VPP_VM_ENV
-| ... | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *IPv4 with VLAN subinterfaces*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
-| ... | with double links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-IPv4-ICMPv4 on TG-DUT1-IF1,
-| ... | Eth-dot1q-IPv4-ICMPv4 on TG-DUT1-IF2.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with 2 Vlan subinterfaces
-| ... | on DUT1-IF2. The subinterfaces and DUT1-IF1 have IP addresses set and
-| ... | corresponding IP neighbor entries are configured.
-| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
-
-*** Variables ***
-
-| ${ip4_net0_1}= | 192.168.0.1
-| ${ip4_net0_2}= | 192.168.0.2
-| ${ip4_net1_1}= | 192.168.100.1
-| ${ip4_net1_2}= | 192.168.100.2
-| ${ip4_net2_1}= | 192.168.200.1
-| ${ip4_net2_2}= | 192.168.200.2
-| ${ip4_prefix}= | 24
-| ${tag_1}= | ${10}
-| ${tag_2}= | ${20}
-
-*** Test Cases ***
-| TC01: Process untagged send tagged
-| | Given Vlan Test Setup
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${ip4_net0_2} | ${ip4_net2_2} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2}
-| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | encaps_rx=Dot1q | vlan_rx=${tag_2}
-
-| TC02: Process tagged send untagged
-| | Given Vlan Test Setup
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${ip4_net2_2} | ${ip4_net0_2} | ${tg_to_dut_if2}
-| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1}
-| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac}
-| | ... | encaps_tx=Dot1q | vlan_tx=${tag_2}
-
-| TC03: Process tagged send tagged
-| | Given Vlan Test Setup
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${ip4_net1_2} | ${ip4_net2_2} | ${tg_to_dut_if2}
-| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2}
-| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | encaps_tx=Dot1q | vlan_tx=${tag_1}
-| | ... | encaps_rx=Dot1q | vlan_rx=${tag_2}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${ip4_net2_2} | ${ip4_net1_2} | ${tg_to_dut_if2}
-| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2}
-| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | encaps_tx=Dot1q | vlan_tx=${tag_2}
-| | ... | encaps_rx=Dot1q | vlan_rx=${tag_1}
-
-*** Keywords ***
-| Vlan Test Setup
-| | Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Set interfaces in 2-node circular topology up
-| |
-| | ${vlan1_name} | ${vlan1_index}= | Create vlan sub-interface
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tag_1}
-| | ${vlan2_name} | ${vlan2_index}= | Create vlan sub-interface
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tag_2}
-| |
-| | VPP Interface Set IP Address | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${ip4_net0_1} | ${ip4_prefix}
-| | VPP Interface Set IP Address | ${dut_node}
-| | ... | ${vlan1_index} | ${ip4_net1_1} | ${ip4_prefix}
-| | VPP Interface Set IP Address | ${dut_node}
-| | ... | ${vlan2_index} | ${ip4_net2_1} | ${ip4_prefix}
-| |
-| | VPP Add IP Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ip4_net0_2} | ${tg_to_dut_if1_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut_node} | ${vlan1_index} | ${ip4_net1_2} | ${tg_to_dut_if2_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut_node} | ${vlan2_index} | ${ip4_net2_2} | ${tg_to_dut_if2_mac}