X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fip4_tunnels%2Flisp%2Feth2p-ethip4lispgpe-ip6basevrf-func.robot;fp=tests%2Fvpp%2Ffunc%2Fip4_tunnels%2Flisp%2Feth2p-ethip4lispgpe-ip6basevrf-func.robot;h=668e870ff0ddd47973672cc4c78833e27ad84e0f;hp=0000000000000000000000000000000000000000;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hpb=859157b5db45927c7b4bb0b2d575e68805777a86

diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6basevrf-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6basevrf-func.robot
new file mode 100644
index 0000000000..668e870ff0
--- /dev/null
+++ b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6basevrf-func.robot
@@ -0,0 +1,110 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Resource | resources/libraries/robot/overlay/lispgpe.robot
+| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
+| Resource | resources/libraries/robot/vm/qemu.robot
+| Library  | resources.libraries.python.IPUtil
+| Library | resources.libraries.python.VhostUser
+| Library  | resources.libraries.python.Trace
+| Library  | resources.libraries.python.VPPUtil
+# import additional Lisp settings from resource file
+| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
+| ... | VM_ENV | HW_ENV
+| ...
+| Test Setup | Set up functional test
+| ...
+| Test Teardown | Tear down LISP functional test
+| ...
+| Documentation | *LISP static adjacency test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\
+| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
+| ... | routing and static routes. LISPoIPv4 tunnel is configured\
+| ... | between DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
+| ... | TG verifies packets for correctness and their IPv6 src-addr,\
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IPv4-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
+| | ... | TG-DUTn.
+| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
+| | ... | [Ver] Case: ip6-lispgpe-ip4 - vrf, phy2lisp
+| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
+| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
+| | ... | received packets are correct.
+| | ... | [Ref] RFC6830.
+| | ...
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Assign Interface To Fib Table | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${fib_table_1} | ip6=${TRUE}
+| | And Assign Interface To Fib Table | ${dut2_node}
+| | ... | ${dut2_to_tg} | ${fib_table_1} | ip6=${TRUE}
+| | And Add IP Neighbors
+| | And Configure IP addresses on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6o4}
+| | ... | ${dut_prefix6o4}
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut_prefix6o4}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4}
+| | And Vpp All RA Suppress Link Layer | ${nodes}
+| | When Configure LISP GPE topology in 3-node circular topology
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency}
+| | ... | ${dut2_ip6o4_static_adjacency}
+| | ... | ${dut1_dut2_vni} | ${fib_table_1}
+| | Then Send packet and verify headers
+| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers
+| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+
+*** Keywords ***
+| Add IP Neighbors
+| | [Documentation]
+| | ... | Add IP neighbors to physical interfaces on DUTs.
+| | ...
+| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4}
+| | ... | ${tg_to_dut1_mac}
+| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4}
+| | ... | ${tg_to_dut2_mac}
+| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_dut1_mac}
+| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4}
+| | ... | ${dut1_to_dut2_mac}