X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fip4_tunnels%2Fsoftwire%2Feth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot;fp=tests%2Fvpp%2Ffunc%2Fip4_tunnels%2Fsoftwire%2Feth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot;h=95e61db654d816ebb6b6e8a1bf4276bb227b60d4;hp=0000000000000000000000000000000000000000;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hpb=859157b5db45927c7b4bb0b2d575e68805777a86 diff --git a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot b/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot new file mode 100644 index 0000000000..95e61db654 --- /dev/null +++ b/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot @@ -0,0 +1,483 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/ip/ip4.robot +| Resource | resources/libraries/robot/ip/ip6.robot +| Resource | resources/libraries/robot/ip/map.robot +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.Trace +| Variables | resources/test_data/softwire/map_e_domains.py | ${5} +| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *Test for Basic mapping rule for MAP-E*\ +| ... | *[Top] Network Topologies:* TG - DUT1 - TG with two links between the +| ... | nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP on TG-to-DUT-if1. +| ... | Eth-IPv6-IPv4-UDP on TG-to-DUT-if2. +| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4 on one DUT-to-TG +| ... | interface and IPv6 address on second DUT-to-TG interface. MAP-E domain +| ... | is configured in test template based on test parameters. +| ... | *[Ver] TG verification:* UDP packets in IPv4 are sent by TG to +| ... | destination in MAP domain. IPv6 packets with encapsulated IPv4 are +| ... | received on TG interface. +| ... | *[Ref] Applicable standard specifications:* RFC7597. + + +*** Variables *** +| ${dut_ip4}= | 10.0.0.1 +| ${dut_ip6}= | 2001:0::1 +| ${dut_ip4_gw}= | 10.0.0.2 +| ${dut_ip6_gw}= | 2001:0::2 +| ${ipv4_prefix_len}= | 24 +| ${ipv6_prefix_len}= | 64 +| ${ipv6_br_src}= | 2001:db8:ffff::1 +| ${ipv4_outside}= | 1.0.0.1 + + +*** Test Cases *** +| TC01: BMR, then an IPv4 prefix is assigned +| | [Documentation] +| | ... | Basic Mapping Rule https://tools.ietf.org/html/rfc7597#section-5.2\ +| | ... | IPv4 prefix length + ea bits length < 32 (o + r < 32) +| | ... | psid_length = 0, ip6_prefix < 64, ip4_prefix <= 32 +| | ... +| | ... | Arguments: +| | ... +| | ... | - ipv4_pfx +| | ... | - ipv6_pfx +| | ... | - ipv6_src +| | ... | - ea_bit_len +| | ... | - psid_offset +| | ... | - psid_len +| | ... | - ipv4_dst +| | ... | - dst_port +| | ... | - expected_ipv6_dst +| | ... +# TODO: replace setup when VPP-312 fixed +#| | [Setup] | Set Interfaces IP Addresses And Routes +| | [Setup] | Run Keywords +| | ... | Set up functional test | AND +| | ... | Set Interfaces IP Addresses And Routes +| | [Template] | Check MAP Configuration With Traffic Script +# |=================|===============|================|============|=============|==========|================|==========|==================================| +# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | expected_ipv6_dst | +# |=================|===============|================|============|=============|==========|================|==========|==================================| +| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${4} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a000::14a0:0:0 | +| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${8} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a900::14a9:0:0 | +| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${10} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c0::14a9:c000:0 | +| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${16} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c9::14a9:c900:0 | +| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${20} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c9:d000:0:14a9:c9d0:0 | +| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${23} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c9:da00:0:14a9:c9da:0 | +| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${4} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:d000::14a9:c9d0:0 | +| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${7} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:da00::14a9:c9da:0 | + + +| TC02: BMR, full IPv4 address is to be assigned +| | [Documentation] +| | ... | Basic Mapping Rule https://tools.ietf.org/html/rfc7597#section-5.2\ +| | ... | IPv4 prefix length + ea bits length == 32 (o + r == 32) +| | ... | psid_length = 0, ip6_prefix < 64, ip4_prefix <= 32 +| | ... +| | ... | Arguments: +| | ... +| | ... | - ipv4_pfx +| | ... | - ipv6_pfx +| | ... | - ipv6_src +| | ... | - ea_bit_len +| | ... | - psid_offset +| | ... | - psid_len +| | ... | - ipv4_dst +| | ... | - dst_port +| | ... | - expected_ipv6_dst +| | ... +# TODO: replace setup when VPP-312 fixed +#| | [Setup] | Set Interfaces IP Addresses And Routes +| | [Setup] | Run Keywords +| | ... | Set up functional test | AND +| | ... | Set Interfaces IP Addresses And Routes +| | [Template] | Check MAP Configuration With Traffic Script +# |===================|===============|================|============|=============|==========|================|==========|==================================| +# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | expected_ipv6_dst | +# |===================|===============|================|============|=============|==========|================|==========|==================================| +| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${24} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c9:db00:0:14a9:c9db:0 | +| | 20.160.0.0/12 | 2001:db8::/32 | ${ipv6_br_src} | ${20} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:9c9d:b000:0:14a9:c9db:0 | +| | 20.169.0.0/16 | 2001:db8::/32 | ${ipv6_br_src} | ${16} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:c9db::14a9:c9db:0 | +| | 20.169.200.0/22 | 2001:db8::/32 | ${ipv6_br_src} | ${10} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:76c0::14a9:c9db:0 | +| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${8} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:db00::14a9:c9db:0 | +| | 20.169.201.208/28 | 2001:db8::/32 | ${ipv6_br_src} | ${4} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:b000::14a9:c9db:0 | +| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${0} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8::14a9:c9db:0 | +| | 20.0.0.0/8 | 2001:db8::/40 | ${ipv6_br_src} | ${24} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9:c9db:0:14a9:c9db:0 | +| | 20.160.0.0/12 | 2001:db8::/44 | ${ipv6_br_src} | ${20} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:9:c9db:0:14a9:c9db:0 | +| | 20.169.0.0/16 | 2001:db8::/48 | ${ipv6_br_src} | ${16} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:0:c9db:0:14a9:c9db:0 | +| | 20.169.200.0/22 | 2001:db8::/54 | ${ipv6_br_src} | ${10} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:0:1db:0:14a9:c9db:0 | + + +| TC03: BMR, shared IPv4 address is to be assigned +| | [Documentation] +| | ... | Basic Mapping Rule https://tools.ietf.org/html/rfc7597#section-5.2\ +| | ... | IPv4 prefix length + ea bits length > 32 (o + r > 32) +| | ... | ip6_prefix < 64, ip4_prefix <= 32 +| | ... +| | ... | Arguments: +| | ... +| | ... | - ipv4_pfx +| | ... | - ipv6_pfx +| | ... | - ipv6_src +| | ... | - ea_bit_len +| | ... | - psid_offset +| | ... | - psid_len +| | ... | - ipv4_dst +| | ... | - dst_port +| | ... | - expected_ipv6_dst +| | ... +# TODO: replace setup when VPP-312 fixed +#| | [Setup] | Set Interfaces IP Addresses And Routes +| | [Setup] | Run Keywords +| | ... | Set up functional test | AND +| | ... | Set Interfaces IP Addresses And Routes +| | [Template] | Check MAP Configuration With Traffic Script +# |===================|===============|================|============|=============|==========|================|==========|===================================| +# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | expected_ipv6_dst | +# |===================|===============|================|============|=============|==========|================|==========|===================================| +| | 20.0.0.0/8 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:a9c9:db34::14a9:c9db:34 | +| | 20.169.0.0/16 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9db:3400::14a9:c9db:34 | +| | 20.169.201.0/24 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db34::14a9:c9db:34 | +| | 20.169.201.219/32 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:3400::14a9:c9db:34 | + +| | 20.0.0.0/8 | 2001::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:a9:c9db:3400:0:14a9:c9db:34 | +| | 20.169.0.0/16 | 2001::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9:db34::14a9:c9db:34 | +| | 20.169.201.0/24 | 2001::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db:3400::14a9:c9db:34 | +| | 20.169.201.219/32 | 2001::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:34::14a9:c9db:34 | +| | 20.169.0.0/16 | 2001::/16 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9db:3400::14a9:c9db:34 | +| | 20.169.201.219/32 | 2001::/16 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:3400::14a9:c9db:34 | + +| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:a9c9:db34:0:14a9:c9db:34 | +| | 20.169.0.0/16 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:c9db:3400:0:14a9:c9db:34 | +| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:db34::14a9:c9db:34 | +| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:3400::14a9:c9db:34 | +| | 20.169.0.0/16 | 2001::/24 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9:db34::14a9:c9db:34 | +| | 20.169.201.0/24 | 2001::/24 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db:3400::14a9:c9db:34 | +| | 20.169.0.0/16 | 2001::/16 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9db:3400::14a9:c9db:34 | +| | 20.169.201.0/24 | 2001::/16 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db34::14a9:c9db:34 | + +| | 20.160.0.0/12 | 2001:db8::/32 | ${ipv6_br_src} | ${25} | ${6} | ${5} | 20.169.201.219 | ${1232} | 2001:db8:9c9d:b300:0:14a9:c9db:6 | +| | 20.169.0.0/16 | 2001:db8::/32 | ${ipv6_br_src} | ${25} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:c9db:3400:0:14a9:c9db:34 | +| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${25} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:db34::14a9:c9db:34 | +| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${25} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:3400::14a9:c9db:34 | + +| | 20.169.192.0/20 | 2001:db8::/32 | ${ipv6_br_src} | ${17} | ${6} | ${5} | 20.169.201.219 | ${1232} | 2001:db8:9db3::14a9:c9db:6 | +| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${17} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:db34::14a9:c9db:34 | +| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${17} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:3400::14a9:c9db:34 | + +| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${12} | ${6} | ${4} | 20.169.201.219 | ${1232} | 2001:db8:db30::14a9:c9db:3 | +| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${12} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:3400::14a9:c9db:34 | + + +| TC04: End user IPv6 prefix is 64 +| | [Documentation] +| | ... | Supported End-User IPv6 prefix length is 64 bit. +| | ... +| | ... | Arguments: +| | ... +| | ... | - ipv4_pfx +| | ... | - ipv6_pfx +| | ... | - ipv6_src +| | ... | - ea_bit_len +| | ... | - psid_offset +| | ... | - psid_len +| | ... | - ipv4_dst +| | ... | - dst_port +| | ... +# TODO: replace setup when VPP-312 fixed +#| | [Setup] | Set Interfaces IP Addresses And Routes +| | [Setup] | Run Keywords +| | ... | Set up functional test | AND +| | ... | Set Interfaces IP Addresses And Routes +| | [Template] | Check MAP Configuration With Traffic Script +# |===================|=========================|================|============|=============|==========|================|==========| +# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | +# |===================|=========================|================|============|=============|==========|================|==========| +| | 20.0.0.0/8 | 2001:db8:0012:3400::/56 | ${ipv6_br_src} | ${8} | ${0} | ${0} | 20.169.201.219 | ${1232} | +| | 20.169.201.208/28 | 2001:db8:0012:3400::/56 | ${ipv6_br_src} | ${8} | ${5} | ${4} | 20.169.201.219 | ${3280} | +| | 20.0.0.0/8 | 2001:db8:0012:3400::/64 | ${ipv6_br_src} | ${0} | ${0} | ${0} | 20.169.201.219 | ${1232} | +| | 20.169.201.219/32 | 2001:db8:0012:3400::/64 | ${ipv6_br_src} | ${0} | ${0} | ${0} | 20.169.201.219 | ${1232} | + + +| TC05: IPv4 prefix is 0 +| | [Tags] | EXPECTED_FAILING +# TODO: replace setup when VPP-312 fixed +#| | [Setup] | Set Interfaces IP Addresses And Routes +| | [Setup] | Run Keywords +| | ... | Set up functional test | AND +| | ... | Set Interfaces IP Addresses And Routes +| | [Template] | Check MAP Configuration With Traffic Script +# |===================|=========================|================|============|=============|==========|================|==========| +# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | +# |===================|=========================|================|============|=============|==========|================|==========| +| | 0.0.0.0/0 | 2001:db8:0000::/40 | ${ipv6_br_src} | ${8} | ${0} | ${0} | 20.169.201.219 | ${1232} | +| | 0.0.0.0/0 | 2001:db8:0000::/40 | ${ipv6_br_src} | ${16} | ${0} | ${0} | 20.169.201.219 | ${1232} | +| | 0.0.0.0/0 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${0} | ${0} | 20.169.201.219 | ${1232} | +| | 0.0.0.0/0 | 2001:d00::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | +| | 0.0.0.0/0 | 2001::/16 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | + + +| TC06: Multiple domain and check with traffic script IPv4 source IPv6 destination +| | [Documentation] +| | ... | [Top] TG=DUT1. +| | ... | [Cfg] Multiple MAP-E domains are configured, values from variable\ +| | ... | file. +| | ... | [Ver] Send IPv4 to destination in configured domain and receive IPv6\ +| | ... | packet. +| | ... | [Ref] RFC7597. +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set interfaces in 2-node circular topology up +| | And Configure IP addresses on interfaces +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} +| | And Vpp Route Add | ${dut_node} | :: | 0 | ${dut_ip6_gw} +| | ... | ${dut_to_tg_if2} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} +| | ... | ${tg_to_dut_if2_mac} +| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | ${dut_ip4_gw} +| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} +| | ... | ${tg_to_dut_if1_mac} +| | :FOR | ${domain_set} | IN | @{domain_sets} +| | | When Map Add Domain | ${dut_node} | @{domain_set} +| | :FOR | ${ip_set} | IN | @{ip_sets} +| | | ${ipv4}= | Get From List | ${ip_set} | 0 +| | | ${ipv6}= | Get From List | ${ip_set} | 1 +| | | ${port}= | Get From List | ${ip_set} | 2 +| | | ${ipv6_br}= | Get From List | ${ip_set} | 3 +| | | Then Send IPv4 UDP And Check Headers For Lightweight 4over6 +| | | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} +| | | ... | ${dut_to_tg_if1_mac} | ${ipv4} | ${ipv4_outside} | ${port} +| | | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${ipv6} | ${ipv6_br} +| | | And Send IPv4 UDP In IPv6 And Check Headers For Lightweight 4over6 +| | | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} +| | | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} | ${ipv6_br} | ${ipv6} +| | | ... | ${ipv4_outside} | ${ipv4} | ${port} | ${tg_to_dut_if1_mac} +| | | ... | ${dut_to_tg_if1_mac} + + +| TC07: Multiple domain and check with traffic script IPv6 source IPv6 destination +| | [Documentation] +| | ... | [Top] TG=DUT1. +| | ... | [Cfg] Multiple MAP-E domains are configured, values from variable\ +| | ... | file. +| | ... | [Ver] Send IPv4 encapsulated in IPv6. Source and destination are from\ +| | ... | configured domains. Check if VPP translate IPv6 addresses. +| | ... | [Ref] RFC7597. +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set interfaces in 2-node circular topology up +| | And Configure IP addresses on interfaces +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} +| | And Vpp Route Add | ${dut_node} | :: | 0 | ${dut_ip6_gw} +| | ... | ${dut_to_tg_if2} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} +| | ... | ${tg_to_dut_if2_mac} +| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | ${dut_ip4_gw} +| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} +| | ... | ${tg_to_dut_if1_mac} +| | :FOR | ${domain_set} | IN | @{domain_sets} +| | | When Map Add Domain | ${dut_node} | @{domain_set} +| | ${ip_set_A}= | Get From List | ${ip_sets} | 0 +| | ${ip_set_B}= | Get From List | ${ip_sets} | 1 +| | ${ipv6_br}= | Get From List | ${ip_set_A} | 3 +| | ${port_A}= | Get From List | ${ip_set_A} | 2 +| | ${port_B}= | Get From List | ${ip_set_B} | 2 +| | ${ipv6_A}= | Get From List | ${ip_set_A} | 1 +| | ${ipv6_B}= | Get From List | ${ip_set_B} | 1 +| | ${ipv4_A}= | Get From List | ${ip_set_A} | 0 +| | ${ipv4_B}= | Get From List | ${ip_set_B} | 0 +| | Then Send IPv4 UDP In IPv6 And Check Headers For Lightweight Hairpinning +| | ... | ${tg_node} | ${tg_to_dut_if2} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} +| | ... | ${ipv6_br} | ${ipv6_A} +| | ... | ${ipv4_B} | ${ipv4_A} +| | ... | ${port_B} | ${port_A} +| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} +| | ... | ${ipv6_B} | ${ipv6_br} + + +| TC08: Encapsulate IPv4 ICMP into IPv6 +| | [Documentation] +| | ... | [Top] TG=DUT1. +| | ... | [Enc] Eth-IPv4-ICMP(type 0 and 8) on TG_if1-DUT, Eth-IPv6-IPv4-ICMP\ +| | ... | on TG_if2_DUT. +| | ... | [Cfg] Multiple MAP-E domains are configured, values from variable\ +| | ... | file. +| | ... | [Ver] Make TG send non-encapsulated ICMP to DUT; verify TG received\ +| | ... | IPv4oIPv6 encapsulated packet is correct. Checks IPv6 destination\ +| | ... | based on ICMP Identifier field. +| | ... | [Ref] RFC7597 section 8.2. +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set interfaces in 2-node circular topology up +| | And Configure IP addresses on interfaces +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} +| | And Vpp Route Add | ${dut_node} | :: | 0 | ${dut_ip6_gw} +| | ... | ${dut_to_tg_if2} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} +| | ... | ${tg_to_dut_if2_mac} +| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | ${dut_ip4_gw} +| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} +| | ... | ${tg_to_dut_if1_mac} +| | :FOR | ${domain_set} | IN | @{domain_sets} +| | | When Map Add Domain | ${dut_node} | @{domain_set} +| | ${ip_set_A}= | Get From List | ${ip_sets} | 0 +| | ${ipv4_A}= | Get From List | ${ip_set_A} | 0 +| | ${ipv6_A}= | Get From List | ${ip_set_A} | 1 +| | ${icmp_id_A}= | Get From List | ${ip_set_A} | 2 +| | ${ipv6_br}= | Get From List | ${ip_set_A} | 3 +| | Then Send IPv4 ICMP And Check Headers For Lightweight 4over6 +| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} +| | ... | ${dut_to_tg_if1_mac} | ${ipv4_A} | ${ipv4_outside} +| | ... | ${icmp_id_A} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} +| | ... | ${ipv6_A} | ${ipv6_br} + + +| TC09: Repeated ip neighbor command doesnt put FIB to broken state +| | [Documentation] | +| | ... | Original issue described in https://jira.fd.io/browse/VPP-312. +| | ... | [Top] TG=DUT1. +| | ... | [Cfg] IP address are set on interfaces, ip neighbor multiple times +| | ... | [Ver] FIB is not in broken state. The steps are add route, \ +| | ... | check with traffic then add same route +| | ... | again and check with traffic script. +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set interfaces in 2-node circular topology up +| | When Configure IP addresses on interfaces +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} +| | And Vpp Route Add | ${dut_node} | 2001:: | 16 | ${dut_ip6_gw} +| | ... | ${dut_to_tg_if2} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} +| | ... | ${tg_to_dut_if2_mac} +| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | ${dut_ip4_gw} +| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} +| | ... | ${tg_to_dut_if1_mac} +| | Then Check MAP Configuration With Traffic Script +| | ... | 20.0.0.0/8 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} +| | ... | 20.169.201.219 | ${1232} | 2001:a9c9:db34::14a9:c9db:34 +| | When Configure IP addresses on interfaces +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} +| | And Vpp Route Add | ${dut_node} | 2001:: | 16 | ${dut_ip6_gw} +| | ... | ${dut_to_tg_if2} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} +| | ... | ${tg_to_dut_if2_mac} +| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | ${dut_ip4_gw} +| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | count=${NONE} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} +| | ... | ${tg_to_dut_if1_mac} +| | Then Check MAP Configuration With Traffic Script +| | ... | 20.0.0.0/8 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} +| | ... | 20.169.201.219 | ${1232} | 2001:a9c9:db34::14a9:c9db:34 + + +| Bug: VPP-318 +| | [Tags] | EXPECTED_FAILING +| | [Documentation] | qlen < psid length +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set interfaces in 2-node circular topology up +| | And Configure IP addresses on interfaces +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} +| | Then Run Keyword And Expect Error | Unable to add map domain * +| | ... | Map Add Domain | ${dut_node} | 20.169.0.0/16 | 2001:db8::/32 +| | ... | ${ipv6_br_src} | ${20} | ${6} | ${8} + + +*** Keywords *** +| Set Interfaces IP Addresses And Routes +| | Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | Set interfaces in 2-node circular topology up +| | Configure IP addresses on interfaces +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} +| | Vpp Route Add | ${dut_node} | :: | 0 | ${dut_ip6_gw} | ${dut_to_tg_if2} +| | ... | resolve_attempts=${NONE} | count=${NONE} +| | Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} +| | ... | ${tg_to_dut_if2_mac} +| | Vpp Route Add | ${dut_node} | ${ipv4_outside} | 32 | ${dut_ip4_gw} +| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | count=${NONE} +| | Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} +| | ... | ${tg_to_dut_if1_mac} + +| Check MAP Configuration With Traffic Script +| | [Documentation] +| | ... | Used as a test case template.\ +| | ... | Configure MAP-E domain with given parameters, with traffic script send +| | ... | UDP in IPv4 packet to given UDP destination port and IP destination +| | ... | address and check if correctly received IPv6 packet. Vice versa send +| | ... | IPv6 packet and check if received IPv4 packet with correct source +| | ... | address. +| | ... | The MAP domain is deleted in teardown. +| | ... | The expected IPv6 address is compared with computed IPv6 address. +| | [Arguments] | ${ipv4_pfx} | ${ipv6_pfx} | ${ipv6_br_src} | ${ea_bit_len} +| | ... | ${psid_offset} | ${psid_len} | ${ipv4_dst} | ${dst_port} +| | ... | ${expected_ipv6_dst}=${EMPTY} +| | ${domain_index}= | Map Add Domain | ${dut_node} | ${ipv4_pfx} | ${ipv6_pfx} +| | ... | ${ipv6_br_src} | ${ea_bit_len} | ${psid_offset} | ${psid_len} +| | ${computed_ipv6_dst}= | Compute IPv6 Map Destination Address +| | ... | ${ipv4_pfx} | ${ipv6_pfx} | ${ea_bit_len} | ${psid_offset} +| | ... | ${psid_len} | ${ipv4_dst} | ${dst_port} +| | ${ipv6_dst}= | Run Keyword If | "${expected_ipv6_dst}" == "${EMPTY}" +| | ... | Set Variable | ${computed_ipv6_dst} +| | ... | ELSE | Set Variable | ${expected_ipv6_dst} +| | Run Keyword If | "${expected_ipv6_dst}" != "${EMPTY}" +| | ... | IP Addresses Should Be Equal +| | ... | ${computed_ipv6_dst} | ${expected_ipv6_dst} +| | ${ipv6_dst}= | Set Variable | ${computed_ipv6_dst} +| | Check Encapsulation With Traffic Script +| | ... | ${ipv4_dst} | ${dst_port} | ${ipv6_dst} +| | Check Decapsulation With Traffic Script +| | ... | ${ipv6_dst} | ${ipv4_dst} | ${dst_port} +| | [Teardown] | Run Keywords +| | ... | Map Del Domain | ${dut_node} | ${domain_index} | AND +| | ... | Show Packet Trace On All DUTs | ${nodes} | AND +| | ... | Clear Packet Trace On All DUTs | ${nodes} | AND +| | ... | Verify VPP PID in Teardown + +| Check Encapsulation With Traffic Script +| | [Arguments] | ${ipv4_dst} | ${dst_port} | ${ipv6_dst} +| | Send IPv4 UDP And Check Headers For Lightweight 4over6 +| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} +| | ... | ${dut_to_tg_if1_mac} | ${ipv4_dst} | ${ipv4_outside} +| | ... | ${dst_port} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} +| | ... | ${ipv6_dst} | ${ipv6_br_src} + +| Check Decapsulation With Traffic Script +| | [Arguments] | ${ipv6_ce_addr} | ${ipv4_inside} | ${port} +| | Send IPv4 UDP In IPv6 And Check Headers For Lightweight 4over6 +| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} +| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} +| | ... | ${ipv6_br_src} | ${ipv6_ce_addr} +| | ... | ${ipv4_outside} | ${ipv4_inside} | ${port} +| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}