X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fip4_tunnels%2Fvxlan%2Feth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot;fp=tests%2Fvpp%2Ffunc%2Fip4_tunnels%2Fvxlan%2Feth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot;h=0000000000000000000000000000000000000000;hp=e4c8c25f0ae1df20dc0789841ab00af6ba42da5e;hb=7ac38855defc0cf8140180d3abc1f5afeb467a74;hpb=882c4df86aba5f803525e59fa17df1b67d2878a9

diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot
deleted file mode 100644
index e4c8c25f0a..0000000000
--- a/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot
+++ /dev/null
@@ -1,74 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/overlay/vxlan.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Library  | resources.libraries.python.Trace
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *RFC7348 VXLAN: Bridge-domain with VXLAN over VLAN test cases*
-| ...
-| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
-| ... | DUT1-DUT2, Eth-dot1q-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) switching combined with static MACs, MAC learning
-| ... | enabled and Split Horizon Groups (SHG) depending on test case; VXLAN
-| ... | tunnels are configured between L2BDs on DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
-| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG
-| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and
-| ... | MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
-
-*** Variables ***
-| ${VNI}= | 23
-| ${BID}= | 23
-| ${VLAN}= | 10
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4oVLAN tunnels switch ICMPv4 between TG links
-| | [Tags] | EXPECTED_FAILING
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\
-| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure L2 bridge-domain (MAC learning enabled), each with one
-| | ... | interface to TG and one VXLAN tunnel interface towards the other DUT
-| | ... | over VLAN sub-interface. [Ver] Make TG send ICMPv4 Echo Req between
-| | ... | two of its interfaces, verify all packets are received. [Ref] RFC7348.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Create vlan interfaces for VXLAN | ${VLAN}
-| | ... | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${dut2_node} | ${dut2_to_dut1}
-| | And Configure IP addresses and neighbors on interfaces
-| | ... | ${dut1_node} | ${dut1s_vlan_name} | ${dut1s_vlan_index}
-| | ... | ${dut2_node} | ${dut2s_vlan_name} | ${dut2s_vlan_index}
-| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI}
-| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan} | up
-| | And Add interfaces to L2BD | ${dut1_node} | ${BID}
-| | ... | ${dut1_to_tg} | ${dut1s_vxlan}
-| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI}
-| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address}
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan} | up
-| | And Add interfaces to L2BD | ${dut2_node} | ${BID}
-| | ... | ${dut2_to_tg} | ${dut2s_vxlan}
-| | Then Send ICMPv4 bidirectionally and verify received packets
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}