X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fip6%2Feth2p-ethip6-ip6base-iaclbase-func.robot;fp=tests%2Fvpp%2Ffunc%2Fip6%2Feth2p-ethip6-ip6base-iaclbase-func.robot;h=0000000000000000000000000000000000000000;hp=ad0d32294817e970742ff49e62ce6027605690d1;hb=1f2723170ac74555aa505ab3cb772ded76501362;hpb=33fb34665214bbbd0a4b3154169b21c2da01f69b

diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
deleted file mode 100644
index ad0d322948..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
+++ /dev/null
@@ -1,200 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *IPv6 routing with ingress ACL test cases*
-| ...
-| ... | Encapsulations: Eth-IPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv6
-| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with
-| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv6
-| ... | routing and static routes. DUT1 is configured with iACL on link to TG,
-| ... | iACL classification and permit action are configured on a per test
-| ... | case basis. Test ICMPv6 Echo Request packets are sent in one direction
-| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG
-| ... | verifies if packets are accepted, or if received verifies packet IPv6
-| ... | src-addr, dst-addr and MAC addresses.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 3ffe:62::1
-| ${dut1_to_dut2_ip}= | 3ffe:63::1
-| ${dut1_to_dut2_ip_GW}= | 3ffe:63::2
-| ${dut2_to_dut1_ip}= | 3ffe:72::1
-| ${dut2_to_tg_ip}= | 3ffe:73::1
-| ${test_dst_ip}= | 3ffe:64::1
-| ${test_src_ip}= | 3ffe:61::1
-| ${non_drop_dst_ip}= | 3ffe:54::1
-| ${non_drop_src_ip}= | 3ffe:51::1
-| ${prefix_length}= | 64
-| ${ip_version}= | ip6
-| ${l2_table}= | l2
-
-*** Test Cases ***
-| TC01: DUT with iACL IPv6 src-addr and dst-addr accepts matching pkts
-| | [Documentation]
-| | ... | On DUT1 add source and destination IPv6 addresses to classify table\
-| | ... | with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
-| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | src | ${test_src_ip}
-| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version}
-| | ... | dst | ${test_dst_ip}
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | permit | ${table_index_1}
-| | ... | ${ip_version} | src | ${test_src_ip}
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | permit | ${table_index_2}
-| | ... | ${ip_version} | dst | ${test_dst_ip}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC02: DUT with iACL IPv6 TCP src-ports and dst-ports accepts matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP source and destination ports to classify table\
-| | ... | with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip}
-| | ... | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP
-| | ... | source + destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-
-| TC03: DUT with iACL IPv6 UDP src-ports and dst-ports accepts matching pkts
-| | [Documentation]
-| | ... | On DUT1 add UDP source and destination ports to classify table\
-| | ... | with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip}
-| | ... | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP
-| | ... | source + destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25