X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fip6%2Feth2p-ethip6-ip6base-iaclbase-func.robot;fp=tests%2Fvpp%2Ffunc%2Fip6%2Feth2p-ethip6-ip6base-iaclbase-func.robot;h=ad0d32294817e970742ff49e62ce6027605690d1;hp=74a92d26ed9244d5a612def85d5819af7fd21a5f;hb=10e0393fde6d919cf0e5848bc5e506d981642ef8;hpb=a8b330a297d085a217ecdb39a74130ee0626b16e

diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
index 74a92d26ed..ad0d322948 100644
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
@@ -36,10 +36,10 @@
 | ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with
 | ... | one link between the nodes. DUT1 and DUT2 are configured with IPv6
 | ... | routing and static routes. DUT1 is configured with iACL on link to TG,
-| ... | iACL classification and permit/deny action are configured on a per test
+| ... | iACL classification and permit action are configured on a per test
 | ... | case basis. Test ICMPv6 Echo Request packets are sent in one direction
 | ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG
-| ... | verifies if packets are dropped, or if received verifies packet IPv6
+| ... | verifies if packets are accepted, or if received verifies packet IPv6
 | ... | src-addr, dst-addr and MAC addresses.
 
 *** Variables ***
@@ -57,103 +57,10 @@
 | ${l2_table}= | l2
 
 *** Test Cases ***
-| TC01: DUT with iACL IPv6 src-addr drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add source IPv6 address to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | src
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${ip_version} | src | ${test_src_ip}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC02: DUT with iACL IPv6 dst-addr drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add destination IPv6 address to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${ip_version} | dst | ${test_dst_ip}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC03: DUT with iACL IPv6 src-addr and dst-addr drops matching pkts
+| TC01: DUT with iACL IPv6 src-addr and dst-addr accepts matching pkts
 | | [Documentation]
 | | ... | On DUT1 add source and destination IPv6 addresses to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | ... | with 'permit'.
 | | Given Configure path in 3-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Set interfaces in 3-node circular topology up
@@ -183,20 +90,21 @@
 | | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
 | | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
 | | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | src
+| | ... | ${ip_version} | src | ${test_src_ip}
 | | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version} | dst
+| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version}
+| | ... | dst | ${test_dst_ip}
 | | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_1}
+| | ... | ${dut1_node} | permit | ${table_index_1}
 | | ... | ${ip_version} | src | ${test_src_ip}
 | | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2}
+| | ... | ${dut1_node} | permit | ${table_index_2}
 | | ... | ${ip_version} | dst | ${test_dst_ip}
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1}
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2}
-| | Then Packet transmission from port to port should fail | ${tg_node}
+| | Then Send packet and verify headers | ${tg_node}
 | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
 | | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
 | | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
@@ -205,183 +113,18 @@
 | | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
 | | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
 
-| TC04: DUT with iACL IPv6 protocol set to TCP drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add protocol mask and TCP protocol (0x06) to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex
-| | ... | ${dut1_node} | 0000000000000000000000000000000000000000FF
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | 000000000000000000000000000000000000000006
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-
-| TC05: DUT with iACL IPv6 protocol set to UDP drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add protocol mask and UDP protocol (0x11) to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex
-| | ... | ${dut1_node} | 0000000000000000000000000000000000000000FF
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | 000000000000000000000000000000000000000011
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-
-| TC06: DUT with iACL IPv6 TCP src-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP source ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | source
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
-
-| TC07: DUT with iACL IPv6 TCP dst-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
-
-| TC08: DUT with iACL IPv6 TCP src-ports and dst-ports drops matching pkts
+| TC02: DUT with iACL IPv6 TCP src-ports and dst-ports accepts matching pkts
 | | [Documentation]
 | | ... | On DUT1 add TCP source and destination ports to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | ... | with 'permit'.
 | | Given Configure path in 3-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Set interfaces in 3-node circular topology up
 | | And VPP Interface Set IP Address
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
 | | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip}
+| | ... | ${prefix_length}
 | | And VPP Add IP Neighbor
 | | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
 | | ... | ${tg_to_dut2_mac}
@@ -403,112 +146,28 @@
 | | ${table_index} | ${skip_n} | ${match_n}=
 | | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
 | | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
+| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
 | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
 | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
 | | And Send TCP or UDP packet and verify received packet | ${tg_node}
 | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
 | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
 
-| TC09: DUT with iACL IPv6 UDP src-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add UDP source ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | source
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
-
-| TC10: DUT with iACL IPv6 UDP dst-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
-
-| TC11: DUT with iACL IPv6 UDP src-ports and dst-ports drops matching pkts
+| TC03: DUT with iACL IPv6 UDP src-ports and dst-ports accepts matching pkts
 | | [Documentation]
 | | ... | On DUT1 add UDP source and destination ports to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | ... | with 'permit'.
 | | Given Configure path in 3-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Set interfaces in 3-node circular topology up
 | | And VPP Interface Set IP Address
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
 | | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip}
+| | ... | ${prefix_length}
 | | And VPP Add IP Neighbor
 | | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
 | | ... | ${tg_to_dut2_mac}
@@ -530,54 +189,12 @@
 | | ${table_index} | ${skip_n} | ${match_n}=
 | | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
 | | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
+| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-
-| TC12: DUT with iACL MAC src-addr and iACL IPv6 UDP src-ports and dst-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add source MAC address to classify (L2) table and add UDP\
-| | ... | source and destination ports to classify (hex) table with 'deny'.
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
 | | Then Send TCP or UDP packet and verify received packet | ${tg_node}
 | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
 | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | src | ${tg_to_dut1_mac}
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP
-| | ... | source + destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
 | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
 | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| | And TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20