X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fl2xc%2Feth2p-eth-l2xcbase-iaclbase-func.robot;fp=tests%2Fvpp%2Ffunc%2Fl2xc%2Feth2p-eth-l2xcbase-iaclbase-func.robot;h=0000000000000000000000000000000000000000;hp=c12a6100f4c961f69d039e1f966a58cd4187dae6;hb=1f2723170ac74555aa505ab3cb772ded76501362;hpb=33fb34665214bbbd0a4b3154169b21c2da01f69b

diff --git a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
deleted file mode 100644
index c12a6100f4..0000000000
--- a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
+++ /dev/null
@@ -1,143 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.Trace
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *Ingress ACL test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG
-| ... |        with one link between the nodes.
-| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect.
-| ... |        DUT1 is configured with iACL classification on link to TG,
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
-| ... |        in one direction by TG on link to DUT1 and received on TG link
-| ... |        to DUT2. On receive TG verifies if packets are accepted.
-
-*** Variables ***
-| ${l2_table}= | l2
-
-*** Test Cases ***
-| TC01: DUT with iACL MAC src-addr accepts matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add source MAC address to classify table with 'permit'.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
-| | ... | src | ${tg_to_dut1_mac}
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | permit | ${table_index} | src | ${tg_to_dut1_mac}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC02: DUT with iACL MAC dst-addr accepts matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add destination MAC address to classify
-| | ... | table with 'permit'.
-| | ... | [Ver] Make TG verify matching packets are accepted.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
-| | ... | dst | ${tg_to_dut2_mac}
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | permit | ${table_index} | dst | ${tg_to_dut2_mac}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC03: DUT with iACL MAC src-addr and dst-addr accepts matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add source and destination MAC address to classify
-| | ... | table with 'permit'.
-| | ... | [Ver] Make TG verify matching packets are accepted.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
-| | ... | src | ${tg_to_dut1_mac}
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | permit | ${table_index_1} | src | ${tg_to_dut1_mac}
-| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
-| | ... | dst | ${tg_to_dut1_mac}
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | permit | ${table_index_2} | dst | ${tg_to_dut1_mac}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_1}
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_2}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-
-| TC04: DUT with iACL EtherType accepts matching pkts
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add EtherType IPv4(0x0800) to classify table with
-| | ... | 'permit'.
-| | ... | [Ver] Make TG verify matching packets are accepted.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex
-| | ... | ${dut1_node} | 000000000000000000000000ffff
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | permit | ${table_index} | 0000000000000000000000000800
-| | And Vpp Enable Input ACL Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}