X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fcontainer_memif%2F10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot;h=4196dab9cae0bc520fdc781fa0e6abd065627234;hp=044d05a45d114f2a60769862b8aac5a3eeec8bd1;hb=5075d208e29ece6bfd8cf4aa5289dd0b2ade583c;hpb=6a6126b2f26607263e4543a1e0b5012ab2f0601b diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot index 044d05a45d..4196dab9ca 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot @@ -1,219 +1,141 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-X710 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance topology with containers -| ... -| Suite Teardown | Tear down 3-node performance topology with container -| ... -| Test Setup | Run Keywords -| ... | Set up performance test -| ... | AND | Restart VPP in all 'VNF' containers -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Check RR for l2xcbase-eth-1memif-1dcr -| ... -| Documentation | *Raw results L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. -| ... | Container is connected to VPP via Memif interface running same VPP -| ... | version as running on DUT. Resources are limited via cgroup to use 5 -| ... | cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) -| ... | to Container, then via horizontal memif to the next Container, and so on -| ... | until the last Container then to NIC (in last Container). Single -| ... | Container is supported as of now. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -# X710-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# Container settings -| ${container_count}= | ${1} -| ${container_engine}= | Docker -| ${container_image}= | ubuntu:xenial-20180412 -| ${container_install_dkms}= | ${TRUE} -| ${container_chain_topology}= | cross_horiz -# CPU settings -| ${system_cpus}= | ${1} -| ${vpp_cpus}= | ${5} -| ${container_cpus}= | ${5} - -*** Keywords *** -| Check RR for l2xcbase-eth-1memif-1dcr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ... -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add single PCI device to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} -| | Then Traffic should pass with maximum rate | ${perf_trial_duration} -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 1C -| | framesize=${64} | wt=1 | rxq=1 - -| tc02-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 1C -| | framesize=${1518} | wt=1 | rxq=1 - -| tc03-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 1C -| | framesize=${9000} | wt=1 | rxq=1 - -| tc04-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 - -| tc05-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 2C -| | framesize=${64} | wt=2 | rxq=1 - -| tc06-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 2C -| | framesize=${1518} | wt=2 | rxq=1 - -| tc07-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 2C -| | framesize=${9000} | wt=2 | rxq=1 - -| tc08-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 - -| tc09-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 4C -| | framesize=${64} | wt=4 | rxq=2 - -| tc10-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 4C -| | framesize=${1518} | wt=4 | rxq=2 - -| tc11-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 4C -| | framesize=${9000} | wt=4 | rxq=2 - -| tc12-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L2 +| ... | Intel-X710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers | chains=${1} +| ... | nodeness=${1} +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'CNF' containers +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | Container is connected to VPP via Memif interface running same VPP +| ... | version as running on DUT. Resources are limited via cgroup to use 5 +| ... | cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) +| ... | to Container, then via horizontal memif to the next Container, and so on +| ... | until the last Container then to NIC (in last Container). Single +| ... | Container is supported as of now. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 +# Container +| ${cpu_count_int}= | ${4} +| ${container_engine}= | Docker +| ${container_chain_topology}= | cross_horiz + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add single PCI device to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect for single memif +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4}