X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fcontainer_memif%2F10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot;h=d62e6774ca1a4c1c6328bb880b2abebcc65076ce;hp=bf52330ec5761208f21fb5651276c0b035385c5a;hb=ad71afc5baa8008bd5d4ea26f51a71eefe3fbe62;hpb=d397a241e86304852f594f1d9d439c3aa4ebdd87 diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot index bf52330ec5..d62e6774ca 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot @@ -1,360 +1,219 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-X710 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance topology with containers -| ... -| Suite Teardown | Tear down 3-node performance topology with container -| ... -| Test Setup | Run Keywords -| ... | Set up performance test -| ... | AND | Restart VPP in all 'VNF' containers -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Find NDRPDR for l2xcbase-eth-1memif-1dcr -| ... -| Documentation | *Raw results L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. -| ... | Container is connected to VPP via Memif interface running same VPP -| ... | version as running on DUT. Resources are limited via cgroup to use 5 -| ... | cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) -| ... | to Container, then via horizontal memif to the next Container, and so on -| ... | until the last Container then to NIC (in last Container). Single -| ... | Container is supported as of now. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# Container settings -| ${container_count}= | ${1} -| ${container_engine}= | Docker -| ${container_image}= | ubuntu:xenial-20180412 -| ${container_install_dkms}= | ${TRUE} -| ${container_chain_topology}= | cross_horiz -# CPU settings -| ${system_cpus}= | ${1} -| ${vpp_cpus}= | ${5} -| ${container_cpus}= | ${5} - -*** Keywords *** -| Find NDRPDR for l2xcbase-eth-1memif-1dcr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Find ${search_type} for ${framesize} frames using binary search\ -| | ... | start at 10GE linerate, step 50kpps. -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} | ${search_type} -| | ... | ${min_rate}=${50000} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add single PCI device to DUTs in 3-node single link topology -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} -| | Then Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=PDR - -| tc03-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=NDR - -| tc04-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=PDR - -| tc05-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 9000B | 1T1C | STHREAD | NDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 1T1C | STHREAD | PDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=NDR - -| tc08-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=PDR - -| tc09-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=NDR - -| tc10-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1T1C | MTHREAD | PDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=PDR - -| tc13-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | NDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=NDR - -| tc14-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | PDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=PDR - -| tc15-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=NDR - -| tc16-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=PDR - -| tc17-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=NDR - -| tc18-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=PDR - -| tc19-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC -| | framesize=${1518} | wt=4 | rxq=2 | search_type=NDR - -| tc20-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | PDRDISC -| | framesize=${1518} | wt=4 | rxq=2 | search_type=PDR - -| tc21-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | NDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=NDR - -| tc22-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | PDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=PDR - -| tc23-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 4T4C | MTHREAD | NDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=NDR - -| tc24-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 4T4C | MTHREAD | PDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=PDR +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L2 +| ... | Intel-X710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local template +| ... +| Documentation | *Raw results L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | Container is connected to VPP via Memif interface running same VPP +| ... | version as running on DUT. Resources are limited via cgroup to use 5 +| ... | cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) +| ... | to Container, then via horizontal memif to the next Container, and so on +| ... | until the last Container then to NIC (in last Container). Single +| ... | Container is supported as of now. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# Traffic profile +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# Container settings +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${TRUE} +| ${container_chain_topology}= | cross_horiz +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add single PCI device to all DUTs +| | And Run Keyword If | ${get_framesize} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect for single memif in 3-node circular topology +| | Then Run Keyword If | '${search_type}' == 'NDR' +| | ... | Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ELSE IF | '${search_type}' == 'PDR' +| | ... | Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | 64B | 1C | NDRDISC +| | framesize=${64} | phy_cores=${1} | search_type=NDR + +| tc02-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | 64B | 1C | PDRDISC +| | framesize=${64} | phy_cores=${1} | search_type=PDR + +| tc03-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | 1518B | 1C | NDRDISC +| | framesize=${1518} | phy_cores=${1} | search_type=NDR + +| tc04-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | 1518B | 1C | PDRDISC +| | framesize=${1518} | phy_cores=${1} | search_type=PDR + +| tc05-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | 9000B | 1C | NDRDISC +| | framesize=${9000} | phy_cores=${1} | search_type=NDR + +| tc06-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | 9000B | 1C | PDRDISC +| | framesize=${9000} | phy_cores=${1} | search_type=PDR + +| tc07-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | IMIX | 1C | NDRDISC +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR + +| tc08-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | IMIX | 1C | PDRDISC +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR + +| tc09-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | 64B | 2C | NDRDISC +| | framesize=${64} | phy_cores=${2} | search_type=NDR + +| tc10-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | 64B | 1C | PDRDISC +| | framesize=${64} | phy_cores=${2} | search_type=PDR + +| tc11-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | 1518B | 2C | NDRDISC +| | framesize=${1518} | phy_cores=${2} | search_type=NDR + +| tc12-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | 1518B | 2C | PDRDISC +| | framesize=${1518} | phy_cores=${2} | search_type=PDR + +| tc13-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | 9000B | 2C | NDRDISC +| | framesize=${9000} | phy_cores=${2} | search_type=NDR + +| tc14-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | 9000B | 2C | PDRDISC +| | framesize=${9000} | phy_cores=${2} | search_type=PDR + +| tc15-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | IMIX | 2C | NDRDISC +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=NDR + +| tc16-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | IMIX | 2C | PDRDISC +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=PDR + +| tc17-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | 64B | 4C | NDRDISC +| | framesize=${64} | phy_cores=${4} | search_type=NDR + +| tc18-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | 64B | 4C | PDRDISC +| | framesize=${64} | phy_cores=${4} | search_type=PDR + +| tc19-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | 1518B | 4C | NDRDISC +| | framesize=${1518} | phy_cores=${4} | search_type=NDR + +| tc20-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | 1518B | 4C | PDRDISC +| | framesize=${1518} | phy_cores=${4} | search_type=PDR + +| tc21-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | 9000B | 4C | NDRDISC +| | framesize=${9000} | phy_cores=${4} | search_type=NDR + +| tc22-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | 9000B | 4C | PDRDISC +| | framesize=${9000} | phy_cores=${4} | search_type=PDR + +| tc23-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Tags] | IMIX | 4C | NDRDISC +| | framesize=IMIX_v4_1 | phy_cores=${4} | search_type=NDR + +| tc24-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Tags] | IMIX | 4C | PDRDISC +| | framesize=IMIX_v4_1 | phy_cores=${4} | search_type=PDR