X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fcrypto%2F2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr.robot;fp=tests%2Fvpp%2Fperf%2Fcrypto%2F2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr.robot;h=0000000000000000000000000000000000000000;hp=96c1f48f8dc27dc3e805b3ae96f9cfff99bec026;hb=282240ecada68e8a6811996057cfdae222fe1be2;hpb=f0b1a973fde92723664ead484e86857b67e5c7de diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr.robot deleted file mode 100644 index 96c1f48f8d..0000000000 --- a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr.robot +++ /dev/null @@ -1,160 +0,0 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | TNL_1000 -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, -| ... | Eth-IPv4-IPSec on DUT1-TG -| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ -| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ -| ... | and sends back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. -| ... | TG traffic profile contains one L3 flow-groups (number of flows -| ... | per flow-group equals to number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to the stream. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${tun_if1_ip4}= | 100.0.0.1 -| ${tun_if2_ip4}= | 100.0.0.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir -| ${traffic_directions}= | ${1} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 2-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${TG_pf2}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${tun_if1_ip4} | ${tun_if2_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-udir-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4}