X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fcrypto%2F40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot;h=e9c29350a5154940959c830961d716bcfe08037c;hp=141d3f7ce1741c116ff5359757ca8a1d48e9654b;hb=6a6126b2f26607263e4543a1e0b5012ab2f0601b;hpb=6721e7f09aa95bff6622068332a3f56afad9c87b

diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot
index 141d3f7ce1..e9c29350a5 100644
--- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot
@@ -22,6 +22,7 @@
 | ... | NIC_Intel-XL710
 | ...
 | Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710
+| ... | HW_cryptodev
 | ...
 | Suite Teardown | Tear down 3-node performance topology
 | ...
@@ -59,29 +60,30 @@
 
 *** Variables ***
 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
+| ${s_24.5G}= | ${24500000000}
 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
+| ${s_18.75Mpps}= | ${18750000}
 | ${dut2_spi}= | ${1000}
 | ${dut1_spi}= | ${1001}
 | ${ESP_PROTO}= | ${50}
 | ${ipsec_overhead}= | ${54}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
 
 *** Test Cases ***
 | tc01-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 phy\
 | | ... | core, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
+| | ... | linerate, step 50kpps.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 64B | 1C | NDRDISC
 | | ...
+| | # FIXME: Move repeated lines into a keyword.
 | | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Set Variable | ${s_18.75Mpps}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -89,11 +91,13 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Add cryptodev to all DUTs | ${1}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -103,15 +107,15 @@
 | tc02-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 phy\
 | | ... | core, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
+| | ... | linerate, step 50kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Set Variable | ${s_18.75Mpps}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -119,11 +123,13 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Add cryptodev to all DUTs | ${1}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -134,15 +140,15 @@
 | tc03-1518B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 phy\
 | | ... | core, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
+| | ... | linerate, step 50kpps.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 1518B | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize + ${ipsec_overhead}}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -150,10 +156,12 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add cryptodev to all DUTs | ${1}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -163,15 +171,15 @@
 | tc04-1518B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 phy\
 | | ... | core, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
+| | ... | linerate, step 50kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize + ${ipsec_overhead}}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -179,10 +187,12 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add cryptodev to all DUTs | ${1}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -193,16 +203,16 @@
 | tc05-IMIX-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 phy\
 | | ... | core, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
+| | ... | linerate, step 50kpps.
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Tags] | IMIX | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${imix_size}= | Get Frame Size | ${framesize}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${imix_size} + ${ipsec_overhead}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -210,10 +220,12 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add cryptodev to all DUTs | ${1}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -223,16 +235,16 @@
 | tc06-IMIX-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 phy\
 | | ... | core, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
+| | ... | linerate, step 50kpps, LT=0.5%.
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${imix_size}= | Get Frame Size | ${framesize}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${imix_size} + ${ipsec_overhead}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -240,10 +252,12 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add cryptodev to all DUTs | ${1}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -254,15 +268,15 @@
 | tc07-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 2 threads, 2 phy\
+| | ... | IPsec is in transport mode. DUTs are configured with 2 phy\
 | | ... | cores, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
+| | ... | linerate, step 50kpps.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 2C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Set Variable | ${s_18.75Mpps}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -270,11 +284,13 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Add cryptodev to all DUTs | ${2}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -284,15 +300,15 @@
 | tc08-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 2 threads, 2 phy\
+| | ... | IPsec is in transport mode. DUTs are configured with 2 phy\
 | | ... | cores, 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
+| | ... | linerate, step 50kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Set Variable | ${s_18.75Mpps}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -300,11 +316,13 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Add cryptodev to all DUTs | ${2}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -315,15 +333,15 @@
 | tc13-64B-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 4 threads, 4 phy\
-| | ... | cores, 2 receive queue per NIC port.
+| | ... | IPsec is in transport mode. DUTs are configured with 4 phy\
+| | ... | cores, 2 receive queues per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
+| | ... | linerate, step 50kpps.
 | | ...
-| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 4C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Set Variable | ${s_18.75Mpps}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -331,11 +349,13 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Add cryptodev to all DUTs | ${4}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -345,15 +365,15 @@
 | tc14-64B-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 4 threads, 4 phy\
-| | ... | cores, 2 receive queue per NIC port.
+| | ... | IPsec is in transport mode. DUTs are configured with 4 phy\
+| | ... | cores, 2 receive queues per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
+| | ... | linerate, step 50kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
+| | ${min_rate}= | Set Variable | ${50000}
 | | ${max_rate}= | Set Variable | ${s_18.75Mpps}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
@@ -361,11 +381,13 @@
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Add cryptodev to all DUTs | ${4}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
 | | And Apply startup configuration on all VPP DUTs
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}