X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fip4%2F10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot;h=c2525b5e76ec4a88f0f4226b3c2f2b862c9a6ffa;hp=69a3c09567e5f21a4b7f066d40e8cf265d514cc7;hb=5221220aa5a893e93d78ba31f84b0ad4d6245ec3;hpb=70068307d35abcd40abbcd9275bcb836d2cdbae6 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot index 69a3c09567..c2525b5e76 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot @@ -28,22 +28,24 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local Template +| ... | Documentation | *Raw results IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.\ -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ +| ... | routing and one static IPv4 /24 route entries. Required ACL rules are\ +| ... | applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested\ +| ... | with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}\ +| ... | flows per flow-group) with all packets containing Ethernet header, IPv4\ +| ... | header with IP protocol=61 and static payload. MAC addresses are\ +| ... | matching MAC addresses of the TG node interfaces. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -66,178 +68,80 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 +| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc + *** Keywords *** -| Check RR for IPv4 routing with ACLs +| Local Template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config with ACL. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology -| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc -| | Set Test Variable | ${traffic_profile} -| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** -| tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 1T1C | STHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} +| tc01-64B-1c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} -| tc02-1518B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 1T1C | STHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${1518} +| tc02-64B-2c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} -| tc03-9000B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 1T1C | STHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${9000} +| tc03-64B-4c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} -| tc04-IMIX-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... -| | [Tags] | IMIX | 1T1C | STHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| tc04-1518B-1c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} -| tc05-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 2T2C | MTHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} +| tc05-1518B-2c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} -| tc06-1518B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${1518} +| tc06-1518B-4c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} -| tc07-9000B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${9000} +| tc07-9000B-1c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} -| tc08-IMIX-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... -| | [Tags] | IMIX | 2T2C | MTHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| tc08-9000B-2c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} -| tc09-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 4T4C | MTHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} +| tc09-9000B-4c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} -| tc10-1518B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${1518} +| tc10-IMIX-1c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} -| tc11-9000B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${9000} +| tc11-IMIX-2c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} -| tc12-IMIX-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... -| | [Tags] | IMIX | 4T4C | MTHREAD -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| tc12-IMIX-4c-ethip4udp-ip4base-iacl50sl-10kflows-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4}