X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fip4%2F10ge2p1x710-dot1q-ip4base-ndrpdr.robot;h=6430a9e8667f02da96cb55e0b3267c639833141d;hp=bac908d3b196384259ece865d5cd592ab8610880;hb=5e6145a4260ffce1c302e94b9b241851f90838e1;hpb=5221220aa5a893e93d78ba31f84b0ad4d6245ec3

diff --git a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
index bac908d3b1..6430a9e866 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -18,14 +18,11 @@
 | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE
 | ...
 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | Intel-X710
-| ...
+| ... | L3 | ${nic_name}
 | Suite Teardown | Tear down 3-node performance topology
 | ...
 | Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down performance discovery test | ${min_rate}pps
-| ... | ${framesize} | ${traffic_profile}
+| Test Teardown | Tear down performance test
 | ...
 | Test Template | Local Template
 | ...
@@ -38,12 +35,13 @@
 | ... | tagging is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
 | ... | routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested\
-| ... | with 2p10GE NIC X710 by Intel.
+| ... | with ${nic_name}.\
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
 | ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library. Test packets are\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are\
 | ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
 | ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
 | ... | all packets containing Ethernet header, IPv4 header with IP\
@@ -52,11 +50,10 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${4}
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
-| ${overhead}= | ${4}
-# X710 bandwidth limit
-| ${s_limit}= | ${10000000000}
 # TG subnets used by T-Rex
 | ${tg_if1_net}= | 10.10.10.0
 | ${tg_if2_net}= | 20.20.20.0
@@ -68,74 +65,71 @@
 | | [Documentation]
 | | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\
 | | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
 | | ...
 | | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
 | | ... | Type: integer, string
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
 | | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
 | | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate} | ${10000}
+| | Set Test Variable | \${frame_size}
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
 | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
 | | Then Find NDR and PDR intervals using optimized search
-| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
 
 *** Test Cases ***
 | tc01-64B-1c-dot1q-ip4base-ndrpdr
 | | [Tags] | 64B | 1C
-| | framesize=${64} | phy_cores=${1}
+| | frame_size=${64} | phy_cores=${1}
 
 | tc02-64B-2c-dot1q-ip4base-ndrpdr
 | | [Tags] | 64B | 2C
-| | framesize=${64} | phy_cores=${2}
+| | frame_size=${64} | phy_cores=${2}
 
 | tc03-64B-4c-dot1q-ip4base-ndrpdr
 | | [Tags] | 64B | 4C
-| | framesize=${64} | phy_cores=${4}
+| | frame_size=${64} | phy_cores=${4}
 
 | tc04-1518B-1c-dot1q-ip4base-ndrpdr
 | | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
+| | frame_size=${1518} | phy_cores=${1}
 
 | tc05-1518B-2c-dot1q-ip4base-ndrpdr
 | | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
+| | frame_size=${1518} | phy_cores=${2}
 
 | tc06-1518B-4c-dot1q-ip4base-ndrpdr
 | | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
+| | frame_size=${1518} | phy_cores=${4}
 
 | tc07-9000B-1c-dot1q-ip4base-ndrpdr
 | | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
+| | frame_size=${9000} | phy_cores=${1}
 
 | tc08-9000B-2c-dot1q-ip4base-ndrpdr
 | | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
+| | frame_size=${9000} | phy_cores=${2}
 
 | tc09-9000B-4c-dot1q-ip4base-ndrpdr
 | | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
+| | frame_size=${9000} | phy_cores=${4}
 
 | tc10-IMIX-1c-dot1q-ip4base-ndrpdr
 | | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
 
 | tc11-IMIX-2c-dot1q-ip4base-ndrpdr
 | | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
 
 | tc12-IMIX-4c-dot1q-ip4base-ndrpdr
 | | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
+| | frame_size=IMIX_v4_1 | phy_cores=${4}