X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fip6%2F10ge2p1x710-dot1q-ip6base-ndrpdr.robot;h=60145712432c17dc1d71f96e99892298fdb45785;hp=7e7bd45d22662f683723bb70c4b8019229cccd87;hb=03984cf5e2affcb715559fad5f68b8ba165ff8cd;hpb=ac89ba8a39355a4a761508870ea0e08212ef7aee

diff --git a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
index 7e7bd45d22..6014571243 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -13,45 +13,56 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | performance
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | dot1q-ip6base
+|
+| Suite Setup | Setup suite topology interfaces | performance
 | Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
+| Test Setup | Setup test | performance
 | Test Teardown | Tear down test | performance
-| ...
+|
 | Test Template | Local Template
-| ...
-| Documentation | *RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q test
-| ... | cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. IEEE 802.1Q\
-| ... | tagging is applied on link between DUT1 and DUT2.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 are tested\
-| ... | with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv6 header with IP\
-| ... | protocol=61 and static payload. MAC addresses are matching MAC\
+|
+| Documentation | **RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q \
+| ... | test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
+| ... | topology with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing. \
+| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 \
+| ... | routing and two static IPv6 /64 route entries. \
+| ... | DUT1 and DUT2 are tested with ${nic_name}.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv6 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
 | ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
 | ${crypto_type}= | ${None}
 | ${nic_name}= | Intel-X710
 | ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
 | ${osi_layer}= | L3
 | ${overhead}= | ${4}
 | ${subid}= | 10
@@ -60,25 +71,25 @@
 | ${tg_if1_net}= | 2001:1::0
 | ${tg_if2_net}= | 2001:2::0
 # Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
+| ${traffic_profile}= | trex-stl-3n-ethip6-ip6src253
 
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] Each DUT runs IPv6 routing with VLAN and uses ${phy_cores}\
-| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| | ... | - **[Cfg]** Each DUT runs IPv6 routing with VLAN and uses \
+| | ... | ${phy_cores} physical core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
 | | ... | Type: integer, string
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
+| |
 | | Given Set Max Rate And Jumbo
 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
 | | And Pre-initialize layer driver | ${nic_driver}
@@ -90,50 +101,50 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| tc01-78B-1c-dot1q-ip6base-ndrpdr
+| 78B-1c-dot1q-ip6base-ndrpdr
 | | [Tags] | 78B | 1C
 | | frame_size=${78} | phy_cores=${1}
 
-| tc02-78B-2c-dot1q-ip6base-ndrpdr
+| 78B-2c-dot1q-ip6base-ndrpdr
 | | [Tags] | 78B | 2C
 | | frame_size=${78} | phy_cores=${2}
 
-| tc03-78B-4c-dot1q-ip6base-ndrpdr
+| 78B-4c-dot1q-ip6base-ndrpdr
 | | [Tags] | 78B | 4C
 | | frame_size=${78} | phy_cores=${4}
 
-| tc04-1518B-1c-dot1q-ip6base-ndrpdr
+| 1518B-1c-dot1q-ip6base-ndrpdr
 | | [Tags] | 1518B | 1C
 | | frame_size=${1518} | phy_cores=${1}
 
-| tc05-1518B-2c-dot1q-ip6base-ndrpdr
+| 1518B-2c-dot1q-ip6base-ndrpdr
 | | [Tags] | 1518B | 2C
 | | frame_size=${1518} | phy_cores=${2}
 
-| tc06-1518B-4c-dot1q-ip6base-ndrpdr
+| 1518B-4c-dot1q-ip6base-ndrpdr
 | | [Tags] | 1518B | 4C
 | | frame_size=${1518} | phy_cores=${4}
 
-| tc07-9000B-1c-dot1q-ip6base-ndrpdr
+| 9000B-1c-dot1q-ip6base-ndrpdr
 | | [Tags] | 9000B | 1C
 | | frame_size=${9000} | phy_cores=${1}
 
-| tc08-9000B-2c-dot1q-ip6base-ndrpdr
+| 9000B-2c-dot1q-ip6base-ndrpdr
 | | [Tags] | 9000B | 2C
 | | frame_size=${9000} | phy_cores=${2}
 
-| tc09-9000B-4c-dot1q-ip6base-ndrpdr
+| 9000B-4c-dot1q-ip6base-ndrpdr
 | | [Tags] | 9000B | 4C
 | | frame_size=${9000} | phy_cores=${4}
 
-| tc10-IMIX-1c-dot1q-ip6base-ndrpdr
+| IMIX-1c-dot1q-ip6base-ndrpdr
 | | [Tags] | IMIX | 1C
 | | frame_size=IMIX_v4_1 | phy_cores=${1}
 
-| tc11-IMIX-2c-dot1q-ip6base-ndrpdr
+| IMIX-2c-dot1q-ip6base-ndrpdr
 | | [Tags] | IMIX | 2C
 | | frame_size=IMIX_v4_1 | phy_cores=${2}
 
-| tc12-IMIX-4c-dot1q-ip6base-ndrpdr
+| IMIX-4c-dot1q-ip6base-ndrpdr
 | | [Tags] | IMIX | 4C
 | | frame_size=IMIX_v4_1 | phy_cores=${4}