X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fip6%2F2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot;h=0f733174d05a29cdcf989ee2c7ac0e8f9b5f27a8;hp=35eb4e792499e74d19752bda7d6308b6ea86fcf0;hb=e916ab4db7dec2cc0bb21dcc31460f819d68b0d5;hpb=6871d4e7f6ed43ce0bb003cb08e88b2581a474eb

diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
index 35eb4e7924..0f733174d0 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
@@ -12,27 +12,26 @@
 # limitations under the License.
 
 *** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
+| Resource | resources/libraries/robot/shared/default.robot
+|
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M
-| ...
-| Suite Setup | Set up 2-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M | DRV_VFIO_PCI
+| ... | ethip6-ip6scale2m
+|
+| Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test
 | Test Teardown | Tear down test | performance
-| ...
+|
 | Test Template | Local Template
-| ...
+|
 | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
-| ...
+|
 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
 | ... | single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\
-| ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.\
+| ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
@@ -47,7 +46,11 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
 | ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
 | ${overhead}= | ${0}
 | ${rts_per_flow}= | ${1000000}
 # Traffic profile:
@@ -56,25 +59,27 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 routing config.
+| | ... | [Cfg] DUT runs IPv6 routing config.\
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
 | | ... | Type: integer, string
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
 | | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv6 forwarding with scaling in circular topology
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv6 forwarding with scaling in circular topology
 | | ... | ${rts_per_flow}
 | | Then Find NDR and PDR intervals using optimized search