X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fl2%2F10ge2p1x520-dot1q-l2xcbase-mrr.robot;h=3da3ad3dac818d707142fd7312825cedce5a0286;hp=f76311bc7477fd1b3824a4f68ba8208d8d1cc34d;hb=5221220aa5a893e93d78ba31f84b0ad4d6245ec3;hpb=5d6479beed22bb3d14a39e9c130946959c13f03e

diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot
index f76311bc74..3da3ad3dac 100644
--- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot
@@ -29,22 +29,21 @@
 | ...
 | Test Template | Local Template
 | ...
-| Documentation | *Raw results L2XC with 802.1q test cases*
+| Documentation | *Raw results L2XC with IEEE 802.1Q test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q\
-| ... | tagging is applied on link between DUT1 and DUT2.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\
+| ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-\
-| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | connect. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
 | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
 | ... | at line rate and reports total received/sent packets over trial period.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... | addresses of the TG node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
@@ -52,15 +51,15 @@
 | ${tag_rewrite}= | pop-1
 | ${overhead}= | ${4}
 # X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
+| ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC config with VLAN dot1q with ${phy_cores} phy
-| | ... | core(s).
+| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\
+| | ... | physical core(s) for worker threads.
 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
 | | ... | trial throughput test.
 | | ...
@@ -77,8 +76,8 @@
 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
 | | ... | ${s_limit} | ${framesize} | overhead=${overhead}
 | | And Apply startup configuration on all VPP DUTs
-| | And Set interfaces in path in 3-node circular topology up
-| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
+| | And Set interfaces in path up
+| | When Initialize VLAN dot1q sub-interfaces in circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}