X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fl2%2F10ge2p1x520-eth-l2bdbasemaclrn-aclinpermitreflect-ndrpdrdisc.robot;fp=tests%2Fvpp%2Fperf%2Fl2%2F10ge2p1x520-eth-l2bdbasemaclrn-aclinpermitreflect-ndrpdrdisc.robot;h=0000000000000000000000000000000000000000;hp=49fba084b3a33c12c56011c400dca33a430b6f06;hb=1e81689582f6f1308903406ae443eb437a889726;hpb=6714a31b73bd8aa03c9edd8da9db4f9173d5679d

diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-aclinpermitreflect-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-aclinpermitreflect-ndrpdrdisc.robot
deleted file mode 100644
index 49fba084b3..0000000000
--- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-aclinpermitreflect-ndrpdrdisc.robot
+++ /dev/null
@@ -1,321 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| Library | resources.libraries.python.Classify
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L2 | Intel-X520-DA2
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| Test Teardown | Run Keywords | Tear down performance discovery test | ${min_rate}pps
-| ... | ${framesize} | ${traffic_profile}
-| ... | AND | Vpp Log Plugin Acl Settings | ${dut1}
-| ... | AND | Cli Show Acl | ${dut1}
-| ... | AND | Run Keyword And Ignore Error
-|     | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
-| ...
-| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
-| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using either binary search or linear search\
-| ... | algorithms with configured starting rate and final step that determines\
-| ... | throughput measurement resolution. Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-# X520-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
-
-# starting points for non-hitting ACLs
-| ${src_ip_start}= | 30.30.30.1
-| ${dst_ip_start}= | 40.40.40.1
-| ${ip_step}= | ${1}
-| ${sport_start}= | ${1000}
-| ${dport_start}= | ${1000}
-| ${port_step}= | ${1}
-| ${trex_stream1_subnet}= | 10.10.10.0/24
-| ${trex_stream2_subnet}= | 20.20.20.0/24
-
-*** Keywords ***
-| Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | [Arguments] | ${wt} | ${rxq} | ${no_hit_aces_number} | ${acl_apply_type}
-| | ...         | ${acl_action} | ${flows_per_dir} | ${framesize} | ${min_rate}
-| | ...         | ${search_type}
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | Set Test Variable | ${no_hit_aces_number}
-| | Set Test Variable | ${acl_apply_type}
-| | Set Test Variable | ${acl_action}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | ${get_framesize}= | Get Frame Size | ${framesize}
-| | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
-| | ${traffic_profile}= | Set Variable If
-| | ... | '${flows_per_dir}' == '100' | trex-sl-3n-ethip4udp-10u10p-conc
-| | ... | '${flows_per_dir}' == '10k' | trex-sl-3n-ethip4udp-10u1000p-conc
-| | ... | '${flows_per_dir}' == '100k' | trex-sl-3n-ethip4udp-100u1000p-conc
-| | Set Test Variable | ${traffic_profile}
-| | Then Run Keyword If | '${search_type}' == 'NDR'
-| | ... | Find NDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ELSE IF | '${search_type}' == 'PDR'
-| | ... | Find PDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-*** Test Cases ***
-| tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-statefull-flows100-ndrdisc
-| | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC | FEATURE | ACL | SRC_USER_100
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=1 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100 | framesize=${64}
-| | ... | min_rate=${10000} | search_type=NDR
-
-| tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl1-statefull-flows100-pdrdisc
-| | [Tags] | 1T1C | STHREAD | PDRDISC | FEATURE | ACL | SRC_USER_100 | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=1 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100 | framesize=${64}
-| | ... | min_rate=${10000} | search_type=PDR
-
-| tc03-64B-1t1c-eth-l2bdbasemaclrn-iacl10-statefull-flows100-ndrdisc
-| | [Tags] | 1T1C | STHREAD | NDRDISC | FEATURE | ACL | SRC_USER_100
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=10 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100 | framesize=${64}
-| | ... | min_rate=${10000} | search_type=NDR
-
-| tc04-64B-1t1c-eth-l2bdbasemaclrn-iacl10-statefull-flows100-pdrdisc
-| | [Tags] | 1T1C | STHREAD | PDRDISC | FEATURE | ACL | SRC_USER_100 | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=10 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100 | framesize=${64}
-| | ... | min_rate=${10000} | search_type=PDR
-
-| tc05-64B-1t1c-eth-l2bdbasemaclrn-iacl50-statefull-flows100-ndrdisc
-| | [Tags] | 1T1C | STHREAD | NDRDISC | FEATURE | ACL | SRC_USER_100
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=50 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100 | framesize=${64}
-| | ... | min_rate=${10000} | search_type=NDR
-
-| tc06-64B-1t1c-eth-l2bdbasemaclrn-iacl50-statefull-flows100-pdrdisc
-| | [Tags] | 1T1C | STHREAD | PDRDISC | FEATURE | ACL | SRC_USER_100 | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=50 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100 | framesize=${64}
-| | ... | min_rate=${10000} | search_type=PDR
-
-| tc07-64B-1t1c-eth-l2bdbasemaclrn-iacl1-statefull-flows10k-ndrdisc
-| | [Tags] | 1T1C | STHREAD | NDRDISC | FEATURE | ACL | SRC_USER_100
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=1 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=10k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=NDR
-
-| tc08-64B-1t1c-eth-l2bdbasemaclrn-iacl1-statefull-flows10k-pdrdisc
-| | [Tags] | 1T1C | STHREAD | PDRDISC | FEATURE | ACL | SRC_USER_100 | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=1 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=10k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=PDR
-
-| tc09-64B-1t1c-eth-l2bdbasemaclrn-iacl10-statefull-flows10k-ndrdisc
-| | [Tags] | 1T1C | STHREAD | NDRDISC | FEATURE | ACL | SRC_USER_100
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=10 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=10k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=NDR
-
-| tc10-64B-1t1c-eth-l2bdbasemaclrn-iacl10-statefull-flows10k-pdrdisc
-| | [Tags] | 1T1C | STHREAD | PDRDISC | FEATURE | ACL | SRC_USER_100 | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=10 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=10k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=PDR
-
-| tc11-64B-1t1c-eth-l2bdbasemaclrn-iacl50-statefull-flows10k-ndrdisc
-| | [Tags] | 1T1C | STHREAD | NDRDISC | FEATURE | ACL | SRC_USER_100
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=50 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=10k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=NDR
-
-| tc12-64B-1t1c-eth-l2bdbasemaclrn-iacl50-statefull-flows10k-pdrdisc
-| | [Tags] | 1T1C | STHREAD | PDRDISC | FEATURE | ACL | SRC_USER_100 | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=50 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=10k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=PDR
-
-| tc13-64B-1t1c-eth-l2bdbasemaclrn-iacl1-statefull-flows100k-ndrdisc
-| | [Tags] | 1T1C | STHREAD | NDRDISC | FEATURE | ACL | SRC_USER_100
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=1 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=NDR
-
-| tc14-64B-1t1c-eth-l2bdbasemaclrn-iacl1-statefull-flows100k-pdrdisc
-| | [Tags] | 1T1C | STHREAD | PDRDISC | FEATURE | ACL | SRC_USER_100 | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=1 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=PDR
-
-| tc15-64B-1t1c-eth-l2bdbasemaclrn-iacl10-statefull-flows100k-ndrdisc
-| | [Tags] | 1T1C | STHREAD | NDRDISC | FEATURE | ACL | SRC_USER_100
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=10 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=NDR
-
-| tc16-64B-1t1c-eth-l2bdbasemaclrn-iacl10-statefull-flows100k-pdrdisc
-| | [Tags] | 1T1C | STHREAD | PDRDISC | FEATURE | ACL | SRC_USER_100 | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=10 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=PDR
-
-| tc17-64B-1t1c-eth-l2bdbasemaclrn-iacl50-statefull-flows100k-ndrdisc
-| | [Tags] | 1T1C | STHREAD | NDRDISC | FEATURE | ACL | SRC_USER_100
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=50 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=NDR
-
-| tc18-64B-1t1c-eth-l2bdbasemaclrn-iacl50-statefull-flows100k-pdrdisc
-| | [Tags] | 1T1C | STHREAD | PDRDISC | FEATURE | ACL | SRC_USER_100 | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with ACL with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs
-| | wt=1 | rxq=1 | no_hit_aces_number=50 | acl_apply_type=input
-| | ... | acl_action=permit+reflect | flows_per_dir=100k | framesize=${64}
-| | ... | min_rate=${10000} | search_type=PDR